CVE-2026-64464

xhci: sideband: fix ring sg table pages leak

In the Linux kernel, the following vulnerability has been resolved: xhci: sideband: fix ring sg table pages leak xhci_ring_to_sgtable() allocates a temporary pages array and uses it to build the returned sg_table with sg_alloc_table_from_pages(). The error paths free the pages array, but the success path returns the sg_table without freeing it. This leaks the temporary array every time a sideband client gets an endpoint or event ring buffer. Free the pages array after sg_alloc_table_from_pages() succeeds. The returned sg_table has its own scatterlist entries and does not depend on the temporary array after construction.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-64458

mm/damon/ops-common: handle extreme intervals in damon_hot_score()

In the Linux kernel, the following vulnerability has been resolved: mm/damon/ops-common: handle extreme intervals in damon_hot_score() Fix three issues in damon_hot_score() that comes from wrong handling of extreme (zero or too high) monitoring intervals user setup. When the user sets sampling interval zero, damon_max_nr_accesses(), which is called from damon_hot_score(), causes a divide-by-zero. Needless to say, it is a problem. When the user sets the aggregation interval zero, the function returns zero. It is wrong, since the real maximum nr_acceses in the setup should be one. Worse yet, it can cause another divide-by-zero from its caller, damon_hot_score(), since it uses damon_max_nr_accesses() return value as a denominator. When the user sets the aggregation interval very high, damon_hot_score() could return a value out of [0, DAMOS_MAX_SCORE] range. Since the return value is used as an index to the regions_score_histogram array, which is DAMOS_MAX_SCORE+1 size, it causes out of bounds array access. The issues can be relatively easily reproduced like below. The sysfs write permission is required, though. # ./damo start --damos_action lru_prio --damos_quota_space 100M \ --damos_quota_interval 1s # cd /sys/kernel/mm/damon/admin/kdamonds/0 # echo 0 > contexts/0/monitoring_attrs/intervals/sample_us # echo 0 > contexts/0/monitoring_attrs/intervals/aggr_us # echo commit > state # dmesg [...] [ 131.329762] Oops: divide error: 0000 [#1] SMP NOPTI [...] [ 131.336089] RIP: 0010:damon_hot_score+0x27/0xd0 [...] Fix the divide-by-zero intervals problems by explicitly handling the zero intervals in damon_max_nr_accesses(). Fix the out-of-bound array access by applying [0, DAMOS_MAX_SCORE] bounds before returning from damon_hot_score(). The issue was discovered [1] by Sashiko.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-64478

ALSA: usb-audio: avoid kobject path lookup in DualSense match

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: avoid kobject path lookup in DualSense match The DualSense jack-detection input handler verifies that a matching input device belongs to the same physical controller by building kobject path strings for both the input device and the USB audio device, then comparing the path prefix. This was observed when a weak physical connection caused the controller to rapidly disconnect and reconnect. During that repeated hotplug, snd_dualsense_ih_match() can run while the controller's USB device is being disconnected. kobject_get_path() walks ancestor kobjects and dereferences their names; if the USB device kobject name is no longer valid, this can fault in strlen(): RIP: 0010:strlen+0x10/0x30 Call Trace: kobject_get_path+0x34/0x150 snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio] input_register_device+0x566/0x6a0 ps_probe+0xb89/0x1590 [hid_playstation] The same ownership check can be done without building kobject path strings. The input device is parented below the HID device, USB interface and USB device, so walking the input device parent chain and comparing against the mixer USB device preserves the check without dereferencing kobject names during disconnect.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-64457

virtio_pci: fix vq info pointer lookup via wrong index

In the Linux kernel, the following vulnerability has been resolved: virtio_pci: fix vq info pointer lookup via wrong index Unbinding a virtio balloon device: echo virtio0 > /sys/bus/virtio/drivers/virtio_balloon/unbind triggers a NULL pointer dereference. The dmesg says: BUG: kernel NULL pointer dereference, address: 0000000000000008 [...] RIP: 0010:__list_del_entry_valid_or_report+0x5/0xf0 Call Trace: <TASK> vp_del_vqs+0x121/0x230 remove_common+0x135/0x150 virtballoon_remove+0xee/0x100 virtio_dev_remove+0x3b/0x80 device_release_driver_internal+0x187/0x2c0 unbind_store+0xb9/0xe0 kernfs_fop_write_iter.llvm.11660790530567441834+0xf6/0x180 vfs_write+0x2a9/0x3b0 ksys_write+0x5c/0xd0 do_syscall_64+0x54/0x230 entry_SYSCALL_64_after_hwframe+0x29/0x31 [...] </TASK> The virtio_balloon device registers 5 queues (inflate, deflate, stats, free_page, reporting) but only the first two are unconditional. The stats, free_page and reporting queues are each conditional on their respective feature bits. When any of these features are absent, the corresponding vqs_info entry has name == NULL, creating holes in the array. The root cause is an indexing mismatch introduced when vq info storage was changed to be passed as an argument. vp_find_vqs_msix() and vp_find_vqs_intx() store the info pointer at vp_dev->vqs[i], where 'i' is the caller's sparse array index. However, the virtqueue itself gets vq->index assigned from queue_idx, a dense index that skips NULL entries. When holes exist, 'i' and queue_idx diverge. Later, vp_del_vqs() looks up info via vp_dev->vqs[vq->index] using the dense index into the sparsely-populated array, and hits NULL. Fix this by storing info at vp_dev->vqs[queue_idx] instead of vp_dev->vqs[i], so the store index matches the lookup index (vq->index). Apply the fix to both the MSIX and INTX paths.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-64455

USB: chaoskey: Fix slab-use-after-free in chaoskey_release()

In the Linux kernel, the following vulnerability has been resolved: USB: chaoskey: Fix slab-use-after-free in chaoskey_release() The chaoskey driver has a use-after-free bug in its release routine. If the user closes the device file after the USB device has been unplugged, a debugging log statement will try to access the usb_interface structure after it has been deallocated: BUG: KASAN: slab-use-after-free in dev_driver_string (drivers/base/core.c:2406) Read of size 8 at addr ffff888168e8a0b8 by task chaoskey_raw_re/10106 Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) dev_driver_string (drivers/base/core.c:2406) __dynamic_dev_dbg (lib/dynamic_debug.c:906) chaoskey_release (drivers/usb/misc/chaoskey.c:323) __fput (fs/file_table.c:510) fput_close_sync (fs/file_table.c:615) __x64_sys_close (fs/open.c:1507 fs/open.c:1492 fs/open.c:1492) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The driver's last reference to the interface structure is dropped in the chaoskey_free() routine, so the code must not use the interface -- even in a debugging statement -- after that routine returns. (Exception: If we know that another reference is held by someone else, such as the device core while the disconnect routine runs, there's no problem. Thanks to Johan Hovold for pointing this out.) Since the bad access is part of an unimportant debugging statement, we can fix the problem simply by removing the whole statement.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-64454

usb: dwc3: run gadget disconnect from sleepable suspend context

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: run gadget disconnect from sleepable suspend context dwc3_gadget_suspend() takes dwc->lock with IRQs disabled and then calls dwc3_disconnect_gadget(). For async callbacks that helper only uses plain spin_unlock()/spin_lock(), so the gadget ->disconnect() callback still runs with IRQs disabled and any sleepable callback trips Lockdep. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the dwc3_gadget_suspend() -> dwc3_disconnect_gadget() -> gadget_driver->disconnect() chain, and Lockdep reported: BUG: sleeping function called from invalid context gadget_disconnect+0x21/0x39 [vuln_msv] dwc3_gadget_suspend.constprop.0+0x2b/0x42 [vuln_msv] Keep the disconnect callback selection in one common helper, but add a sleepable suspend-side wrapper which snapshots the callback under dwc->lock and then runs it after spin_unlock_irqrestore(). The regular event path still uses the existing spin_unlock()/spin_lock() window.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-63983

net/sched: fix packet loop on netem when duplicate is on

In the Linux kernel, the following vulnerability has been resolved: net/sched: fix packet loop on netem when duplicate is on When netem duplicates a packet it re-enqueues the copy at the root qdisc. If another netem sits in the tree the copy can be duplicated again, recursing until the stack or memory is exhausted. The original duplication guard temporarily zeroed q->duplicate around the re-enqueue, but that does not cover all cases because it is per-qdisc state shared across all concurrent enqueue paths and is not safe without additional locking. Use the skb tc_depth field introduced in an earlier patch: - increment it on the duplicate before re-enqueue - skip duplication for any skb whose tc_depth is already non-zero. This marks the packet itself rather than mutating qdisc state, therefore it is safe regardless of tree topology or concurrency.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-63982

net/sched: Fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop

In the Linux kernel, the following vulnerability has been resolved: net/sched: Fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop When mirred redirects to ingress (from either ingress or egress) the loop state from sched_mirred_dev array dev is lost because of 1) the packet deferral into the backlog and 2) the fact the sched_mirred_dev array is cleared. In such cases, if there was a loop we won't discover it. Here's a simple test to reproduce: ip a add dev port0 10.10.10.11/24 tc qdisc add dev port0 clsact tc filter add dev port0 egress protocol ip \ prio 10 matchall action mirred ingress redirect dev port1 tc qdisc add dev port1 clsact tc filter add dev port1 ingress protocol ip \ prio 10 matchall action mirred egress redirect dev port0 ping -c 1 -W0.01 10.10.10.10

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-63981

net/sched: act_mirred: Fix blockcast recursion bypass leading to stack overflow

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: Fix blockcast recursion bypass leading to stack overflow tcf_mirred_act() checks sched_mirred_nest against MIRRED_NEST_LIMIT (4) to prevent deep recursion. However, when the action uses blockcast (tcfm_blockid != 0), the function returns at the tcf_blockcast() call BEFORE reaching the counter increment. As a result, the recursion counter never advances and the limit check is entirely bypassed. When two devices share a TC egress block with a mirred blockcast rule, a packet egressing on device A is mirrored to device B via blockcast; device B's egress TC re-enters tcf_mirred_act() via blockcast and mirrors back to A, creating an unbounded recursion loop: tcf_mirred_act -> tcf_blockcast -> tcf_mirred_to_dev -> dev_queue_xmit -> sch_handle_egress -> tcf_classify -> tcf_mirred_act -> (repeat) This recursion continues until the kernel stack overflows. The bug is reachable from an unprivileged user via unshare(CLONE_NEWUSER | CLONE_NEWNET): user namespaces grant CAP_NET_ADMIN in the new network namespace, which is sufficient to create dummy devices, attach clsact qdiscs with shared blocks, and install mirred blockcast filters. BUG: TASK stack guard page was hit at ffffc90000b7fff8 Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI CPU: 2 UID: 1000 PID: 169 Comm: poc Not tainted 7.0.0-rc7-next-20260410 RIP: 0010:xas_find+0x17/0x480 Call Trace: xa_find+0x17b/0x1d0 tcf_mirred_act+0x640/0x1060 tcf_action_exec+0x400/0x530 basic_classify+0x128/0x1d0 tcf_classify+0xd83/0x1150 tc_run+0x328/0x620 __dev_queue_xmit+0x797/0x3100 tcf_mirred_to_dev+0x7b1/0xf70 tcf_mirred_act+0x68a/0x1060 [repeating ~30+ times until stack overflow] Kernel panic - not syncing: Fatal exception in interrupt Fix this by incrementing sched_mirred_nest before calling tcf_blockcast() and decrementing it on return, mirroring the non-blockcast path. This ensures subsequent recursive entries see the updated counter and are correctly limited by MIRRED_NEST_LIMIT.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-63978

net/handshake: Drain pending requests at net namespace exit

In the Linux kernel, the following vulnerability has been resolved: net/handshake: Drain pending requests at net namespace exit The arguments to list_splice_init() in handshake_net_exit() are reversed. The call moves the local empty "requests" list onto hn->hn_requests, leaving the local list empty, so the subsequent drain loop runs zero iterations. Pending handshake requests that had not yet been accepted are not torn down when the net namespace is destroyed; each one keeps a reference on a socket file and on the handshake_req allocation. Pass the source and destination in the documented order (list_splice_init(list, head) moves list onto head) so the pending list is transferred to the local scratch list and drained through handshake_complete(). Fixing the splice direction exposes a list-corruption race. After the splice each req->hr_list still has non-empty link pointers, threading the stack-local scratch list rather than hn_requests. A concurrent handshake_req_cancel() -- for example, from sunrpc's TLS timeout on a kernel socket whose netns reference was not taken -- finds the request through the rhashtable, calls remove_pending(), and sees !list_empty(&req->hr_list). __remove_pending_locked() then list_del_init()s an entry off the scratch list while the drain iterates, corrupting it. The same call arriving after the drain loop has run list_del() on an entry hits LIST_POISON instead. Have remove_pending() check HANDSHAKE_F_NET_DRAINING under hn_lock and report not-found when drain is in progress. The drain has already taken ownership; handshake_complete()'s existing test_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitrates between drain and cancel for who calls the consumer's hp_done. Use list_del_init() rather than list_del() in the drain so req->hr_list does not carry LIST_POISON after drain releases the entry. The DRAINING guard in remove_pending() makes cancel return false, but cancel still falls through to test_and_set_bit on HANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference. Without another pin, if that is the last reference, sk_destruct frees the request while it is still linked on the drain loop's local list. Pin each request's hr_file under hn_lock before releasing the list, and drop that drain pin after the loop finishes with the request.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-64480

ALSA: ice1712: check snd_ctl_new1() return value

In the Linux kernel, the following vulnerability has been resolved: ALSA: ice1712: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. The ice1712 driver calls snd_ctl_new1() without checking the return value before dereferencing the pointer in multiple places (ice1712.c, ice1724.c, aureon.c), which can lead to NULL pointer dereferences. Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any fails.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-64479

ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup()

In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup() snd_seq_event_dup() copies an incoming event into a pool cell and, in the UMP-enabled build, clears the trailing cell->ump.raw.extra word that the memcpy() did not cover. The guard deciding whether to clear it compares the copied size against sizeof(cell->event): memcpy(&cell->ump, event, size); if (size < sizeof(cell->event)) cell->ump.raw.extra = 0; For a legacy (non-UMP) event, size == sizeof(struct snd_seq_event) == sizeof(cell->event), so the condition is false and the extra word keeps stale data. The cell pool is allocated with kvmalloc() (not zeroed) and cells are reused via a free list, so that word holds uninitialised heap or leftover event data. When such a cell is delivered to a UMP client (client->midi_version > 0) that set SNDRV_SEQ_FILTER_NO_CONVERT -- so the legacy event reaches it unconverted -- snd_seq_read() reads it out as the larger struct snd_seq_ump_event and copies the stale word to user space, a 4-byte kernel heap infoleak to an unprivileged /dev/snd/seq client. Compare against sizeof(cell->ump) instead, so the trailing word is zeroed for every event shorter than the UMP cell.

CVSS 3.1 · 3.3 Low EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-63977

dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work

In the Linux kernel, the following vulnerability has been resolved: dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work The change_work was introduced to send device change notifications from DPLL device callbacks without deadlocking on dpll_lock, since the callbacks are already invoked under that lock. Now that __dpll_device_change_ntf() is exported for callers that already hold dpll_lock, use it directly and remove the change_work infrastructure entirely. This eliminates a race condition where change_work could be re-scheduled after cancel_work_sync() during device teardown, potentially causing the handler to dereference a freed or NULL dpll_dev pointer.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-63976

Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success l2cap_ecred_reconf_rsp() returns early on success without clearing chan->ident. Every other L2CAP response handler (l2cap_ecred_conn_rsp, l2cap_le_connect_rsp, l2cap_config_rsp) clears chan->ident after a successful transaction to prevent the channel from matching subsequent responses with the recycled ident value. A remote attacker that completed a reconfiguration as the peer can replay a failure response with the stale ident, causing the kernel to match and destroy the already-established channel via l2cap_chan_del(chan, ECONNRESET). Clear chan->ident for all matching channels on success, and harden the failure path by using l2cap_chan_hold_unless_zero() consistent with other L2CAP handlers (l2cap_le_command_rej, __l2cap_get_chan_by_ident).

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-64477

x86,fs/resctrl: Prevent out-of-bounds access while offlining CPU when SNC enabled

In the Linux kernel, the following vulnerability has been resolved: x86,fs/resctrl: Prevent out-of-bounds access while offlining CPU when SNC enabled The architecture updates the cpu_mask in a domain's header to track which online CPUs are associated with the domain. When this mask becomes empty the architecture initiates offline of the domain that includes calling on resctrl fs to offline the domain. If it is a monitoring domain in which LLC occupancy is tracked resctrl fs forces the limbo handler to clear all busy RMID state associated with the domain. The limbo handler always reads the current event value associated with a busy RMID irrespective of it being checked as part of regular "is it still busy" check or whether it will be forced released anyway. When reading an RMID on a system with SNC enabled the "logical RMID" is converted to the "physical RMID" and this conversion requires the NUMA node ID of the resctrl monitoring domain that is in turn determined by querying the NUMA node ID of any CPU belonging to the monitoring domain. When the monitoring domain is going offline its cpu_mask is empty causing the NUMA node ID query via cpu_to_node() to be done with "nr_cpu_ids" as argument resulting in an out-of-bounds access. Refactor the limbo handler to skip reading the RMID when the RMID will just be forced to no longer be dirty in the domain anyway. Add a safety check to the architecture's RMID reader to protect against this scenario.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-64471

Bluetooth: btusb: fix use-after-free on registration failure

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: fix use-after-free on registration failure Make sure to release the sibling interfaces in case controller registration fails to avoid use-after-free and double-free when they are eventually disconnected. This issue was reported by Sashiko while reviewing a fix for a wakeup source leak in the btusb probe errors paths.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-64470

Bluetooth: btusb: fix use-after-free on marvell probe failure

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: fix use-after-free on marvell probe failure Make sure to stop any TX URBs submitted during Marvell OOB wakeup configuration on later probe failures to avoid use-after-free in the completion callback. This issue was reported by Sashiko while reviewing a fix for a wakeup source leak in the btusb probe errors paths.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-63882

drm/amdkfd: fix NULL pointer bug in svm_range_set_attr

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix NULL pointer bug in svm_range_set_attr The process_info could be NULL if user doesn't call kfd_ioctl_acquire_vm before calling kfd_ioctl_svm. (cherry picked from commit 83a26c812e0529eb040d31a76f73e33e637243d4)

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-63871

Bluetooth: ISO: Fix data-race on iso_pi fields in hci_get_route calls

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix data-race on iso_pi fields in hci_get_route calls iso_connect_bis(), iso_connect_cis(), iso_listen_bis(), and iso_conn_big_sync() call hci_get_route() using iso_pi(sk)->dst, iso_pi(sk)->src, and iso_pi(sk)->src_type without holding lock_sock(). These fields may be modified concurrently by connect() or setsockopt() on the same socket, resulting in data-races reported by KCSAN. Fix this by snapshotting the required fields under lock_sock() before calling hci_get_route(). BUG: KCSAN: data-race in memcmp+0x45/0xb0 race at unknown origin, with read to 0xffff8880122135cf of 1 bytes by task 333 on cpu 1: memcmp+0x45/0xb0 hci_get_route+0x27e/0x490 iso_connect_cis+0x4c/0xa10 iso_sock_connect+0x60e/0xb30 __sys_connect_file+0xbd/0xe0 __sys_connect+0xe0/0x110 __x64_sys_connect+0x40/0x50 x64_sys_call+0xcad/0x1c60 do_syscall_64+0x133/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-63857

net: airoha: Do not read uninitialized fragment address in airoha_dev_xmit()

In the Linux kernel, the following vulnerability has been resolved: net: airoha: Do not read uninitialized fragment address in airoha_dev_xmit() The transmit loop in airoha_dev_xmit() reads fragment address and length during its final iteration, when the loop index equals skb_shinfo(skb)->nr_frags, at which point the fragment data is uninitialized. While these values are never consumed, the read itself is unsafe and may trigger a page fault. Fix this by avoiding the fragment read on the last iteration. Additionally, move the skb pointer from the first to the last used packet descriptor, so that airoha_qdma_tx_napi_poll() defers freeing the skb until the final descriptor is processed.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel