An ni_dhcp4_fsm_process_dhcp4_packet memory leak in openSUSE wicked 0.6.55 and earlier allows network attackers to cause a denial of service by sending DHCP4 packets with a different client-id.

An ni_dhcp4_parse_response memory leak in openSUSE wicked 0.6.55 and earlier allows network attackers to cause a denial of service by sending DHCP4 packets without a message type option.

python-urllib3: inefficient algorithm allows a DoS (CPU consumption) in _encode_invalid_chars function in util/url.py

The _encode_invalid_chars function in util/url.py in the urllib3 library 1.25.2 through 1.25.7 for Python allows a denial of service (CPU consumption) because of an inefficient algorithm. The percent_encodings array contains all matches of percent encodings. It is not deduplicated. For a URL of length N, the size of percent_encodings may be up to O(N). The next step (normalize existing percent-encoded bytes) also takes up to O(N) for each step, so the total time is O(N^2). If percent_encodings were deduplicated, the time to compute _encode_invalid_chars would be O(kN), where k is at most 484 ((10+6*2)^2).

kibana: DoS in Timelion

Kibana versions before 6.8.11 and 7.8.1 contain a denial of service (DoS) flaw in Timelion. An attacker can construct a URL that when viewed by a Kibana user can lead to the Kibana process consuming large amounts of CPU and becoming unresponsive.

TUF (aka The Update Framework) 0.7.2 through 0.12.1 allows Uncontrolled Resource Consumption.

An exploitable denial-of-service vulnerability exists in the resource allocation handling of Videolabs libmicrodns 0.1.0. When encountering errors while parsing mDNS messages, some allocated data is not freed, possibly leading to a denial-of-service condition via resource exhaustion. An attacker can send one mDNS message repeatedly to trigger this vulnerability through the function rr_read_RR [5] reads the current resource record, except for the RDATA section. This is read by the loop at in rr_read. For each RR type, a different function is called. When the RR type is 0x10, the function rr_read_TXT is called at [6].

On BIG-IP LTM 15.1.0-15.1.0.5, 14.1.0-14.1.2.7, 13.1.0-13.1.3.4, and 12.1.0-12.1.5.1, the Traffic Management Microkernel (TMM) process may consume excessive resources when processing SSL traffic and client authentication are enabled on the client SSL profile.

In BIG-IP versions 15.1.0-15.1.0.4, 15.0.0-15.0.1.3, and 14.1.0-14.1.2.6, a BIG-IP virtual server with a Session Initiation Protocol (SIP) ALG profile, parsing SIP messages that contain a multi-part MIME payload with certain boundary strings can cause TMM to free memory to the wrong cache.

In BIG-IP APM versions 12.1.0-12.1.5.1 and 11.6.1-11.6.5.2, RADIUS authentication leaks memory when the username for authentication is not set.

On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.2.3, 14.0.0-14.0.1, and 13.1.0-13.1.3.1, when a virtual server is configured with HTTP explicit proxy and has an attached HTTP_PROXY_REQUEST iRule, POST requests sent to the virtual server cause an xdata memory leak.

Improper input validation in GROWI versions prior to v4.2.3 (v4.2 Series), GROWI versions prior to v4.1.12 (v4.1 Series), and GROWI v3 series and earlier GROWI versions prior to v4.2.3 (v4.2 Series), GROWI versions prior to v4.1.12 (v4.1 Series), and GROWI v3 series and earlier allows remote attackers to cause a denial of service via unspecified vectors.

Uncontrolled resource consumption vulnerability in MELSEC iQ-R Series modules (R00/01/02CPU firmware version '19' and earlier, R04/08/16/32/120 (EN) CPU firmware version '51' and earlier, R08/16/32/120SFCPU firmware version '22' and earlier, R08/16/32/120PCPU firmware version '25' and earlier, R08/16/32/120PSFCPU firmware version '06' and earlier, RJ71EN71 firmware version '47' and earlier, RJ71GF11-T2 firmware version '47' and earlier, RJ72GF15-T2 firmware version '07' and earlier, RJ71GP21-SX firmware version '47' and earlier, RJ71GP21S-SX firmware version '47' and earlier, and RJ71GN11-T2 firmware version '11' and earlier) allows a remote unauthenticated attacker to cause an error in a CPU unit and cause a denial-of-service (DoS) condition in execution of the program and its communication, or to cause a denial-of-service (DoS) condition in communication via the unit by receiving a specially crafted SLMP packet

Uncontrolled resource consumption vulnerability in MELSEC iQ-R Series CPU Modules (R00/01/02CPU Firmware versions from '05' to '19' and R04/08/16/32/120(EN)CPU Firmware versions from '35' to '51') allows a remote attacker to cause an error in a CPU unit via a specially crafted HTTP packet, which may lead to a denial-of-service (DoS) condition in execution of the program and its communication.

Uncontrolled resource consumption vulnerability in Ethernet Port on MELSEC iQ-R, Q and L series CPU modules (R 00/01/02 CPU firmware versions '20' and earlier, R 04/08/16/32/120 (EN) CPU firmware versions '52' and earlier, R 08/16/32/120 SFCPU firmware versions '22' and earlier, R 08/16/32/120 PCPU all versions, R 08/16/32/120 PSFCPU all versions, R 16/32/64 MTCPU all versions, Q03 UDECPU, Q 04/06/10/13/20/26/50/100 UDEHCPU serial number '22081' and earlier , Q 03/04/06/13/26 UDVCPU serial number '22031' and earlier, Q 04/06/13/26 UDPVCPU serial number '22031' and earlier, Q 172/173 DCPU all versions, Q 172/173 DSCPU all versions, Q 170 MCPU all versions, Q 170 MSCPU all versions, L 02/06/26 CPU (-P) and L 26 CPU - (P) BT all versions) allows a remote unauthenticated attacker to stop the Ethernet communication functions of the products via a specially crafted packet, which may lead to a denial of service (DoS) condition .

Uncontrolled resource consumption vulnerability in Mitsubishi Electoric FA Engineering Software (CPU Module Logging Configuration Tool Ver. 1.94Y and earlier, CW Configurator Ver. 1.010L and earlier, EM Software Development Kit (EM Configurator) Ver. 1.010L and earlier, GT Designer3 (GOT2000) Ver. 1.221F and earlier, GX LogViewer Ver. 1.96A and earlier, GX Works2 Ver. 1.586L and earlier, GX Works3 Ver. 1.058L and earlier, M_CommDTM-HART Ver. 1.00A, M_CommDTM-IO-Link Ver. 1.02C and earlier, MELFA-Works Ver. 4.3 and earlier, MELSEC-L Flexible High-Speed I/O Control Module Configuration Tool Ver.1.004E and earlier, MELSOFT FieldDeviceConfigurator Ver. 1.03D and earlier, MELSOFT iQ AppPortal Ver. 1.11M and earlier, MELSOFT Navigator Ver. 2.58L and earlier, MI Configurator Ver. 1.003D and earlier, Motion Control Setting Ver. 1.005F and earlier, MR Configurator2 Ver. 1.72A and earlier, MT Works2 Ver. 1.156N and earlier, RT ToolBox2 Ver. 3.72A and earlier, and RT ToolBox3 Ver. 1.50C and earlier) allows an attacker to cause a denial of service (DoS) condition attacks via unspecified vectors.

When MELSOFT transmission port (UDP/IP) of Mitsubishi Electric MELSEC iQ-R series (all versions), MELSEC iQ-F series (all versions), MELSEC Q series (all versions), MELSEC L series (all versions), and MELSEC F series (all versions) receives massive amount of data via unspecified vectors, resource consumption occurs and the port does not process the data properly. As a result, it may fall into a denial-of-service (DoS) condition. The vendor states this vulnerability only affects Ethernet communication functions.

Cloud Controller is vulnerable to denial of service via YAML parsing

CAPI (Cloud Controller) versions prior to 1.101.0 are vulnerable to a denial-of-service attack in which an unauthenticated malicious attacker can send specially-crafted YAML files to certain endpoints, causing the YAML parser to consume excessive CPU and RAM.

CF clusters with NGINX in front of them may be vulnerable to DoS

Cloud Foundry Routing (Gorouter), versions prior to 0.204.0, when used in a deployment with NGINX reverse proxies in front of the Gorouters, is potentially vulnerable to denial-of-service attacks in which an unauthenticated malicious attacker can send specially-crafted HTTP requests that may cause the Gorouters to be dropped from the NGINX backend pool.

Dell EMC Isilon OneFS versions 8.2.2 and earlier contain a denial of service vulnerability. SmartConnect had an error condition that may be triggered to loop, using CPU and potentially preventing other SmartConnect DNS responses.

Catastrophic backtracking in regex allows Denial of Service in Waitress

Waitress version 1.4.2 allows a DOS attack When waitress receives a header that contains invalid characters. When a header like "Bad-header: xxxxxxxxxxxxxxx\x10" is received, it will cause the regular expression engine to catastrophically backtrack causing the process to use 100% CPU time and blocking any other interactions. This allows an attacker to send a single request with an invalid header and take the service offline. This issue was introduced in version 1.4.2 when the regular expression was updated to attempt to match the behaviour required by errata associated with RFC7230. The regular expression that is used to validate incoming headers has been updated in version 1.4.3, it is recommended that people upgrade to the new version of Waitress as soon as possible.