CVE-2026-11352

QUIC zero-length UDP datagrams busy-loop

An issue in curl’s QUIC UDP receive function allows a malicious HTTP/3 server to trigger a remote denial of service against a curl or libcurl client. Because the helper function discards zero-length UDP datagrams before counting them toward the per-call packet budget, a connected QUIC peer can continuously stream empty datagrams to indefinitely stall the client.

CVSS 3.1 · 7.5 High EPSS 1.0% KEV · Not listed

Vendors

Curl Haxx

Products

Curl Curl

CVE-2026-14651

connorskees grass visitor denial of service

A vulnerability has been found in connorskees grass up to 0.13.4. The impacted element is the function grass_compiler::selector::extend/grass_compiler::evaluate::visitor. The manipulation leads to denial of service. The attack must be carried out locally. The exploit has been disclosed to the public and may be used. The project maintainer explains: "DoS vulnerabilities are generally fine in Sass compilers -- they are trivially possible with recursive functions, infinite loops, nested mixins, etc. The description here is wrong. Compile time is not expected to be linear relative to the input, and the @extend algorithm is definitionally exponential."

CVSS 4.0 · 4.8 Medium EPSS < 1% KEV · Not listed

Vendors

Connorskees

Products

Grass

CVE-2026-53326

debugobjects: Don't call fill_pool() in early boot hardirq context

In the Linux kernel, the following vulnerability has been resolved: debugobjects: Don't call fill_pool() in early boot hardirq context When booting a debug PREEMPT_RT kernel on an ARM64 system, a "inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage" lockdep warning message was reported to the console. During early boot, interrupts are enabled before the scheduler is enabled. In this window (before SYSTEM_SCHEDULING is set) interrupts can fire and in the hard interrupt context handler attempt to fill the pool This can lead to a deadlock when the interrupt occurred when the interrupt hits a region which holds a lock that is required to be taken in the allocation path. Add a new can_fill_pool() helper and reorder the exception rule and forbid this scenario by excluding allocations from hard interrupt context.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-53336

nvmem: layouts: onie-tlv: fix hang on unknown types

In the Linux kernel, the following vulnerability has been resolved: nvmem: layouts: onie-tlv: fix hang on unknown types The EEPROM on my board has a vendor specific entry of type 0x41. When stumbling upon that, this driver hangs in an endless loop. Fix it by keep incrementing the offset on unknown entries, so the loop will eventually stop.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-55595

ImageMagick: Infinite Loop in connected-components when providing invalid arguments

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-51 and 7.1.2-26, when providing invalid arguments to the connected-components option an infinite loop will occur. This issue has been fixed in versions 6.9.13-51 and 7.1.2-26.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed

Vendors

Imagemagick

Products

Imagemagick

CVE-2026-53331

slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lock

In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lock During the SSR/PDR down notification the tx_lock is taken with the intent to provide synchronization with active DMA transfers. But during this period qcom_slim_ngd_down() is invoked, which ends up in slim_report_absent(), which takes the slim_controller lock. In multiple other codepaths these two locks are taken in the opposite order (i.e. slim_controller then tx_lock). The result is a lockdep splat, and a possible deadlock: rprocctl/449 is trying to acquire lock: ffff00009793e620 (&ctrl->lock){+.+.}-{4:4}, at: slim_report_absent (drivers/slimbus/core.c:322) slimbus but task is already holding lock: ffff00009793fb50 (&ctrl->tx_lock){+.+.}-{4:4}, at: qcom_slim_ngd_ssr_pdr_notify (drivers/slimbus/qcom-ngd-ctrl.c:1475) slim_qcom_ngd_ctrl which lock already depends on the new lock. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ctrl->tx_lock); lock(&ctrl->lock); lock(&ctrl->tx_lock); lock(&ctrl->lock); The assumption is that the comment refers to the desire to not call qcom_slim_ngd_exit_dma() while we have an ongoing DMA TX transaction. But any such transaction is initiated and completed within a single qcom_slim_ngd_xfer_msg(). Prior to calling qcom_slim_ngd_exit_dma() the slim_controller is torn down, all child devices are notified that the slimbus is gone and the child devices are removed. Stop taking the tx_lock in qcom_slim_ngd_ssr_pdr_notify() to avoid the deadlock.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-49432

Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Stomp: STOMP negative content-length enables denial of service

Improper Input Validation vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Stomp. A remote unauthenticated peer that can reach an exposed STOMP connector can trigger denial-of-service behavior by sending a negative content-length. For the NIO STOMP transport, an attacker can keep streaming body bytes and grow the per-connection command buffer beyond configured limits to cause OOM. For the blocking STOMP protocol, an error will instead force abnormal transport exception handling for the affected connection and closure. This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Stomp: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed

Vendors

Apache

Products

Activemq Activemq All Activemq Stomp

CVE-2026-53320

nilfs2: reject zero bd_oblocknr in nilfs_ioctl_mark_blocks_dirty()

In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject zero bd_oblocknr in nilfs_ioctl_mark_blocks_dirty() nilfs_ioctl_mark_blocks_dirty() uses bd_oblocknr to detect dead blocks by comparing it with the current block number bd_blocknr. If they differ, the block is considered dead and skipped. However, bd_oblocknr should never be 0 since block 0 typically stores the primary superblock and is never a valid GC target block. A corrupted ioctl request with bd_oblocknr set to 0 causes the comparison to incorrectly match when the lookup returns -ENOENT and sets bd_blocknr to 0, bypassing the dead block check and calling nilfs_bmap_mark() on a non-existent block. This causes nilfs_btree_do_lookup() to return -ENOENT, triggering the WARN_ON(ret == -ENOENT). Fix this by rejecting ioctl requests with bd_oblocknr set to 0 at the beginning of each iteration. [ryusuke: slightly modified the commit message and comments for accuracy]

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-53036

bpf, arm64: Fix off-by-one in check_imm signed range check

In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Fix off-by-one in check_imm signed range check check_imm(bits, imm) is used in the arm64 BPF JIT to verify that a branch displacement (in arm64 instruction units) fits into the signed N-bit immediate field of a B, B.cond or CBZ/CBNZ encoding before it is handed to the encoder. The macro currently tests for (imm > 0 && imm >> bits) || (imm < 0 && ~imm >> bits) which admits values in [-2^N, 2^N) — effectively a signed (N+1)-bit range. A signed N-bit field only holds [-2^(N-1), 2^(N-1)), so the check admits one extra bit of range on each side. In particular, for check_imm19(), values in [2^18, 2^19) slip past the check but do not fit into the 19-bit signed imm19 field of B.cond. aarch64_insn_encode_immediate() then masks the raw value into the 19-bit field, setting bit 18 (the sign bit) and flipping a forward branch into a backward one. Same class of issue exists for check_imm26() and the B/BL encoding. Shift by (bits - 1) instead of bits so the actual signed N-bit range is enforced.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-53312

iommu/riscv: Remove overflows on the invalidation path

In the Linux kernel, the following vulnerability has been resolved: iommu/riscv: Remove overflows on the invalidation path Since RISC-V supports a sign extended page table it should support a gather->end of ULONG_MAX, but if this happens it will infinite loop because of the overflow. Also avoid overflow computing the length by moving the +1 to the other side of the <

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-44736

OpenProject: Relations API Filter Bypasses Visibility Scope, Leaking Cross-Project Work Package Subjects

OpenProject is open-source, web-based project management software. Prior to 17.4.0, the GET /api/v3/relations endpoint allows any authenticated user to retrieve relations — and the subject (title) of work packages they have no permission to view — by supplying an arbitrary work package ID in the involved, fromId, or toId filter. This bypasses the Relation.visible scope due to a flawed performance optimization in RelationQuery. This vulnerability is fixed in 17.4.0.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed

Vendors

Opf

Products

Openproject

CVE-2026-53197

xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state()

In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state() iptfs_destroy_state() calls hrtimer_cancel() while holding a spinlock that the timer callback also acquires, leading to an ABBA deadlock on SMP systems. For the output timer (iptfs_timer): - iptfs_destroy_state() holds x->lock, calls hrtimer_cancel() - iptfs_delay_timer() callback takes x->lock For the drop timer (drop_timer): - iptfs_destroy_state() holds drop_lock, calls hrtimer_cancel() - iptfs_drop_timer() callback takes drop_lock Both timers use HRTIMER_MODE_REL_SOFT, so their callbacks run in softirq context. When hrtimer_cancel() is called for a soft timer that is currently executing on another CPU, hrtimer_cancel_wait_running() spins on softirq_expiry_lock -- the same lock held by the softirq running the callback. If the callback is blocked waiting for the spinlock held by the caller of hrtimer_cancel(), a circular dependency forms: CPU 0: holds lock_A -> waits for softirq_expiry_lock CPU 1: holds softirq_expiry_lock -> waits for lock_A Fix by calling hrtimer_cancel() before acquiring the respective locks. hrtimer_cancel() is safe to call without holding any lock and will wait for any in-progress callback to complete. For the output timer, the lock is still acquired afterwards to drain the packet queue. For the drop timer, the lock/unlock pair is removed entirely since it only existed to serialize with the timer callback, which hrtimer_cancel() already guarantees. Found by source code audit.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-9222

Setracker2 Children's Smartwatch Ecosystem Use of password hash instead of password for authentication

Setracker2 Android Companion App com.tgelec.setracker versions 3.1.5 and prior only require the password hash when authenticating with backend services from the client. This could allow an attacker, who knows the hash, to authenticate and gain full access.

CVSS 4.0 · 9.2 Critical EPSS < 1% KEV · Not listed

Vendors

Shenzhen I365

Products

Setracker2 Parental Control App (android) Package Com.tgelec.setracker

CVE-2026-4598

jsrsasign: jsrsasign: Denial of Service via infinite loop in bnModInverse function with crafted inputs

Versions of the package jsrsasign before 11.1.1 are vulnerable to Infinite loop via the bnModInverse function in ext/jsbn2.js when the BigInteger.modInverse implementation receives zero or negative inputs, allowing an attacker to hang the process permanently by supplying such crafted values (e.g., modInverse(0, m) or modInverse(-1, m)).

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed

Vendors

Kjur

Products

Jsrsasign

CVE-2025-71319

image-size 2.0.2 Denial of Service via Infinite Loop in JXL/HEIF Parser

image-size through 2.0.2 contains a denial of service vulnerability that allows remote attackers to permanently block the Node.js event loop by supplying a specially crafted image buffer with a zero-valued size field in a recognized box-type. Attackers can trigger an infinite loop in the JXL or HEIF image parsers by providing a crafted image containing a box with a size of zero, causing the offset to never advance and permanently hanging the application.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed

Vendors

Image-size Image Sizes Project Redhat

Products

Image-size Image Sizes Discovery and 3 more

CVE-2026-50171

Angular: Denial of Service (DoS) via OOM in Number Formatting (digitsInfo)

Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. Prior to 22.0.0-rc.2, 21.2.15, 20.3.22, and 19.2.23, a Denial of Service (DoS) vulnerability exists in the @angular/common package of Angular. The formatNumber function, which is also utilized by DecimalPipe, PercentPipe, and CurrencyPipe, does not properly validate the upper bounds of the digitsInfo parameter. Specifically, the minimum and maximum fraction digits parsed from the digitsInfo string (e.g., 1.2-4) are converted to integers and used without limits. When parsing a maliciously crafted digitsInfo string with excessively large fraction digit values (e.g., 1.200000000-200000000), the internal roundNumber function attempts to pad the digits array to match the requested fraction size. This results in an unbounded loop that repeatedly pushes elements into an array. This vulnerability is fixed in 22.0.0-rc.2, 21.2.15, 20.3.22, and 19.2.23.

CVSS 4.0 · 8.2 High EPSS < 1% KEV · Not listed

Vendors

Angular

Products

Angular

CVE-2026-48986

pam_usb: Infinite loop DoS in process-tree walk when parent process exits during authentication

pam_usb provides hardware authentication for Linux using removable media. In pam_usb 0.9.1 and earlier, usb_get_process_parent_id() can cause an infinite loop DoS because it does not initialize *ppid on failure. In pusb_local_login(), the same variable is reused as input and output in a process-tree while loop; if /proc/<pid>/stat cannot be read (for example, when an ancestor process exits during authentication), the PID is not updated and the loop does not terminate. This hangs the authenticating process (such as sudo, sshd, or login) until it is forcibly terminated. This issue has been fixed in version 0.9.2.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed

Vendors

Mcdope

Products

Pam Usb

CVE-2026-46314

drm/v3d: Reject empty multisync extension to prevent infinite loop

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Reject empty multisync extension to prevent infinite loop v3d_get_extensions() walks a userspace-provided singly-linked list of ioctl extensions without any bound on the chain length. A local user can craft a self-referential extension (ext->next == &ext) with zero in_sync_count and out_sync_count, which bypasses the existing duplicate- extension guard: if (se->in_sync_count || se->out_sync_count) return -EINVAL; The guard never fires because v3d_get_multisync_post_deps() returns immediately when count is zero, leaving both fields at zero on every iteration. The result is an infinite loop in kernel context, blocking the calling thread and pegging a CPU core indefinitely. Fix this by rejecting a multisync extension where both in_sync_count and out_sync_count are zero in v3d_get_multisync_submit_deps(). An empty multisync carries no synchronization information and serves no useful purpose, so returning -EINVAL for such an extension is the correct defense against this attack vector.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-55199

libssh2 - Pre-Authentication DoS via SSH_MSG_EXT_INFO Handler

libssh2 through 1.11.1, fixed in commit 1762685, contains a pre-authentication denial of service vulnerability in the SSH_MSG_EXT_INFO handler in src/packet.c that allows a malicious SSH server to cause a client CPU exhaustion loop by sending a crafted extension count value. A malicious server can set nr_extensions to 0xFFFFFFFF during key exchange, causing the client to spin in a tight CPU loop for over 60 seconds because return values from _libssh2_get_string() are unchecked and the session timeout does not apply to CPU-bound loops.

CVSS 4.0 · 8.2 High EPSS < 1% KEV · Not listed

Vendors

Libssh2

Products

Libssh2

CVE-2026-46041

greybus: gb-beagleplay: fix sleep in atomic context in hdlc_tx_frames()

In the Linux kernel, the following vulnerability has been resolved: greybus: gb-beagleplay: fix sleep in atomic context in hdlc_tx_frames() hdlc_append() calls usleep_range() to wait for circular buffer space, but it is called with tx_producer_lock (a spinlock) held via hdlc_tx_frames() -> hdlc_append_tx_frame()/hdlc_append_tx_u8()/etc. Sleeping while holding a spinlock is illegal and can trigger "BUG: scheduling while atomic". Fix this by moving the buffer-space wait out of hdlc_append() and into hdlc_tx_frames(), before the spinlock is acquired. The new flow: 1. Pre-calculate the worst-case encoded frame length. 2. Wait (with sleep) outside the lock until enough space is available, kicking the TX consumer work to drain the buffer. 3. Acquire the spinlock, re-verify space, and write the entire frame atomically. This ensures that sleeping only happens without any lock held, and that frames are either fully enqueued or not written at all. This bug is found by CodeQL static analysis tool (interprocedural sleep-in-atomic query) and my code review.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel