CVE-2026-53399

nfsd: release layout stid on setlease failure

In the Linux kernel, the following vulnerability has been resolved: nfsd: release layout stid on setlease failure nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via idr_alloc_cyclic() under cl_lock before returning to nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then fails, the error path frees the layout stateid directly with kmem_cache_free() without ever calling idr_remove(), leaving the IDR slot pointing at freed slab memory. Any subsequent IDR walker (states_show, client teardown) dereferences the dangling pointer. The correct teardown for an IDR-published stid is nfs4_put_stid(), which removes the IDR slot under cl_lock, dispatches sc_free (nfsd4_free_layout_stateid) to release ls->ls_file via nfsd4_close_layout(), and drops the nfs4_file reference in its tail. A second issue blocks that switch: nfsd4_free_layout_stateid() unconditionally inspects ls->ls_fence_work via delayed_work_pending() under ls_lock, but INIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs only after the setlease call. On the setlease-failure path the destructor would touch an uninitialized delayed_work. nfsd4_alloc_layout_stateid() nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */ nfsd4_layout_setlease() /* fails */ nfs4_put_stid() nfsd4_free_layout_stateid() delayed_work_pending(&ls->ls_fence_work) /* needs INIT */ nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */ put_nfs4_file() Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORK initialization above the nfsd4_layout_setlease() call, and replace the manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanup with a single nfs4_put_stid(stp).

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-98483

nfc: fix use-after-free in nfc_get_local_general_bytes

In the Linux kernel, the following vulnerability has been resolved: nfc: fix use-after-free in nfc_get_local_general_bytes Commit 6709d4b7bc2e ("net: nfc: Fix use-after-free caused by nfc_llcp_find_local") attempted to fix a use-after-free (UAF) issue by invoking nfc_llcp_local_put(local) after accessing local->gb. However, if the reference count drops to zero, local is freed immediately, leading to a use-after-free when callers access the returned pointer. Alternative approaches using dynamic allocation (e.g. kmemdup) introduced memory leaks because callers consistently treat the returned pointer as borrowed memory. Fix this properly by refactoring nfc_llcp_general_bytes() and nfc_get_local_general_bytes() to accept a caller-provided output buffer (out_gb) and its maximum length (gb_max_len). The general bytes are safely copied into out_gb before calling nfc_llcp_local_put(local), ensuring safe lifetime management without ownership transfer complications. Update all callers across drivers (microread, pn533, pn544, st21nfca, digital_dep, and nci) to provide their own destination buffers and pass them to nfc_get_local_general_bytes().

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-98606

drm/virtio: release the GEM object on virtio_gpu_vram_create() errors

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: release the GEM object on virtio_gpu_vram_create() errors virtio_gpu_vram_create() frees the object with a bare kfree(vram) on both error paths after drm_gem_private_object_init() has run, and on the second one after drm_gem_create_mmap_offset() has linked obj->vma_node into the device's VMA offset manager. The freed object stays in that interval tree, so a later lookup or insertion walks freed memory, and the dma_resv and gpuva lock are never destroyed. Call drm_gem_object_release() before kfree() on both paths.

CVSS 3.1 · 7.0 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-98617

eth: fbnic: use the Rx queue napi pointer to find the napi vector

In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: use the Rx queue napi pointer to find the napi vector The queue management ndos pick the napi vector for an Rx queue with: nv = fbn->napi[idx % fbn->num_napi]; The issue is this is only correct in the cases where there are no standalone Tx vectors. In those cases we were allocating the Tx vectors first and then the Rx so the queues would be pointing to Tx NAPI vectors instead of the Rx ones. The mapping the ndos want is already recorded. fbnic_set_netif_napi() publishes it with netif_queue_set_napi(), which stores the napi pointer in netdev_rx_queue.napi, and fbnic_reset_netif_napi() clears it again. Both run under the netdev instance lock that the queue management ndos also hold, so the pointer can be read directly. Use it and drop the divide. The pointer is NULL exactly while the datapath is down, so fbnic_queue_mem_alloc() can reject that case rather than reaching into freed state: netdev_rx_queue_restart() calls it before it tests netif_running(), and fbnic_pm_suspend() leaves netif_running() true across a PCIe recovery that never completes, so a queue restart can arrive after fbnic_stop() has freed the rings and the vectors. fbnic_stop() clears the association in fbnic_reset_netif_queues() before fbnic_free_napi_vectors(), so the NULL is always published first. fbnic_queue_start() and fbnic_queue_stop() need no check of their own, as netdev_rx_queue_reconfig() only reaches them once fbnic_queue_mem_alloc() has succeeded under the same instance lock.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-98625

netfilter: flowtable: publish HW_DEAD after worker is done

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: publish HW_DEAD after worker is done flow_offload_work_del() sets NF_FLOW_HW_DEAD before the work handler clears NF_FLOW_HW_PENDING. Once a flow is both HW_DYING and HW_DEAD, a concurrent garbage collection pass can remove it and schedule it for RCU freeing. The offload worker holds neither an RCU read lock nor a reference to the flow. If it is preempted after publishing HW_DEAD, the RCU callback can free the flow before the worker resumes and clears HW_PENDING, resulting in a use-after-free. Move HW_DEAD publication to the common worker epilogue after the pending bit is cleared, making it the final flow access by destroy work. Order all preceding flow accesses before publishing the bit that allows garbage collection to free the object.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-98632

Bluetooth: mgmt: Dequeue pending mesh_send_sync entries on cancel

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: Dequeue pending mesh_send_sync entries on cancel In send_cancel(), pending mesh_tx objects are removed from the hdev->mesh_pending list and freed via mesh_send_complete(). However, if a mesh transmission was already queued onto hdev->cmd_sync_work_list via mesh_next(), the queued entry retains a raw pointer to mesh_tx. When hci_cmd_sync_work later processes the entry, it attempts to execute mesh_send_sync and its destroy callback mesh_send_start_complete using the already freed mesh_tx pointer, leading to a use-after-free. Fix this by invoking hci_cmd_sync_dequeue() for mesh_send_sync on the target mesh_tx before completing it. If the entry is found and dequeued, its destroy callback will complete and free the object; otherwise, mesh_send_complete() is called directly. Additionally, ensure the transmission queue advances after cancellation or errors. In mesh_send_start_complete(), call mesh_next() on error unless err is -ECANCELED, because hci_cmd_sync_dequeue() holds hdev->cmd_sync_work_lock and calling mesh_next() synchronously would deadlock. Instead, advance the queue in send_cancel() once the lock is released and if no transmission is in progress.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-98693

thunderbolt: Hold a router reference for each allocated HopID

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Hold a router reference for each allocated HopID tb_stop() drops the reference to all DP tunnels but does not deactivate them, thus nothing cancels a dprx_work still in flight (which holds its own tunnel reference) and the tunnel can outlive tb_switch_remove(). The HopID releases in tb_path_free() then operate on freed IDAs and trigger warnings like ida_free called for id=8 which is not allocated. This can be triggered by unbinding the driver while a DP tunnel is still waiting for the DPRX capabilities read to finish. On the Apple NHI unplugging the cable runs into just that reliably because the read can never finish right now and because the unplug powers down the entire USB4 complex and removes the NHI device. Take a router reference whenever an input or output HopID is allocated and drop it again after the HopID is released. This keeps the ports and their HopID IDAs alive for as long as they are used. The KUnit tests allocate routers without ever registering their devices so initialize the embedded struct device there as well and drop its initial reference when the test is finished.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-63823

keys: Pin request_key_auth payload in instantiate paths

In the Linux kernel, the following vulnerability has been resolved: keys: Pin request_key_auth payload in instantiate paths A: request_key() B: KEYCTL_INSTANTIATE_IOV ================ ========================= create auth key store rka in auth key wait for helper get auth key load rka from auth key copy user payload sleep on #PF helper completed detach and free rka destroy auth key wake up use rka->target_key **USE-AFTER-FREE** Give request_key_auth payloads a refcount. Take a payload reference while authkey->sem stabilizes the payload and revocation state. Hold that reference across the instantiate and reject paths. Drop the auth key owning reference from revoke and destroy. [jarkko: Replaced the first two paragraphs of text with an actual concurrency scenario.]

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-98122

vxlan: mdb: Fix use-after-free in vxlan_mdb_remote_src_del()

In the Linux kernel, the following vulnerability has been resolved: vxlan: mdb: Fix use-after-free in vxlan_mdb_remote_src_del() vxlan_mdb_is_valid_source(), which validates MDBE_ATTR_SOURCE and every MDBE_ATTR_SRC_LIST member, accepts the all-zeros address. A source list is only accepted on a (*, G) entry, whose source is the all-zeros address, and for each member of the list an (S, G) entry is derived from it by substituting the source. Entries are keyed by a plain memcmp() of struct vxlan_mdb_entry_key, so if MDBE_ATTR_SOURCE is present and holds the all-zeros address and the source list holds it as well, the derived (S, G) key is byte-identical to the (*, G) key and resolves to the same entry. Omitting MDBE_ATTR_SOURCE is not equivalent, as the key is then left with a zero address family. vxlan_mdb_remote_src_del() removes the forwarding entry of a source before freeing the source entry: vxlan_mdb_remote_src_fwd_del(vxlan, group, remote, &ent->addr); vxlan_mdb_remote_src_entry_del(ent); With the keys aliased, the first call deletes the remote of the entry that owns 'ent' instead of a separate (S, G) entry, and frees 'ent'. The second call then runs on the freed entry, and its hlist_del() reads ->pprev and ->next out of it and writes through them. Adding the (*, G) entry with NLM_F_REPLACE and no source list marks the all-zeros source for deletion and reaches this from the sweep at the end of vxlan_mdb_remote_srcs_replace(). BUG: KASAN: slab-use-after-free in __vxlan_mdb_add+0x1cd/0xd70 Read of size 8 at addr ffff888102852500 by task poc/84 __vxlan_mdb_add+0x1cd/0xd70 vxlan_mdb_add+0xc0/0x140 rtnl_mdb_add+0x157/0x2a0 rtnetlink_rcv_msg+0x207/0x5a0 Allocated by task 84: __kmalloc_cache_noprof+0x153/0x360 vxlan_mdb_remote_srcs_add+0x2eb/0x440 __vxlan_mdb_add+0x803/0xd70 Freed by task 84: kfree+0x14c/0x3b0 vxlan_mdb_remote_del+0x129/0x1a0 __vxlan_mdb_del+0x4f/0xe0 vxlan_mdb_remote_src_fwd_del.isra.0+0x162/0x1b0 __vxlan_mdb_add+0x1c5/0xd70 The MDB operations are netns-scoped, so an unprivileged user can perform them in a new user and network namespace. Reject the all-zeros address in vxlan_mdb_is_valid_source(), which covers both call sites. A (*, G) entry is expressed by omitting the source, so nothing legitimate is refused. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-113081

chromium-browser: chromium-browser: Use after free in Compositing

Use after free in Compositing in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium)

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed

Vendors

Google

Products

Chrome

CVE-2026-98130

sctp: fix a TOCTOU race in SCTP_CMD_TIMER_START

In the Linux kernel, the following vulnerability has been resolved: sctp: fix a TOCTOU race in SCTP_CMD_TIMER_START The SCTP_CMD_TIMER_START handler checks timer_pending() before calling timer_reduce(). The timer can expire and detach between these operations, causing timer_reduce() to rearm the timer without taking the association reference required for the newly armed timer. The timer callback later unconditionally drops its association reference, which can leave the association reference count unbalanced and result in use-after-free during association teardown. Use the return value of timer_reduce() to determine whether the timer was actually armed. Take the association reference only when timer_reduce() successfully starts a new timer, closing the race between checking the timer state and rearming it. This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero Day Initiative.

CVSS 3.1 · 8.1 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-113161

chromium-browser: chromium-browser: Use after free in WebRTC

Use after free in WebRTC in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High)

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed

Vendors

Google

Products

Chrome

CVE-2026-63924

ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()

In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo() ipv6_hop_jumbo() calls pskb_trim_rcsum(), which can change skb pointers. Let's recompute nh pointer to make sure any change won't mess things up.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-110753

Text::CSV_XS versions from 1.46 before 1.65 for Perl have a use-after-free of bind_columns variables when skip_empty_rows skips an empty line in getline

Text::CSV_XS versions from 1.46 before 1.65 for Perl have a use-after-free of bind_columns variables when skip_empty_rows skips an empty line in getline. With bind_columns, the parser writes each field into the caller's own scalar without taking a reference to it. When skip_empty_rows skips an empty last line, the parser frees the current field scalar without checking whether it is bound, dropping one reference from the application's variable. The "eof" mode does the same on any empty line. The variable is then freed while the application still references it, so later code uses freed memory and can crash the process.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed

Vendors

Hmbrand

Products

Text::csv Xs

CVE-2026-113043

chromium-browser: chromium-browser: Use after free in iOSWeb

Use after free in iOSWeb in Google Chrome on on iOS prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium)

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed

Vendors

Apple Google

Products

Iphone Os Chrome

CVE-2026-100072

ACPI: platform: Use acpi_bus_get_primary_device()

In the Linux kernel, the following vulnerability has been resolved: ACPI: platform: Use acpi_bus_get_primary_device() The acpi_get_first_physical_node() usage in acpi_platform_fill_resource() and acpi_create_platform_device() is generally unsafe because in theory the device returned by it may be freed at any time [1]. It is also inefficient because acpi_get_first_physical_node() is called multiple times for the same argument which can be avoided. Address these issues by using acpi_bus_get_primary_device() instead of acpi_get_first_physical_node() and adjusting the code to call it just once at the beginning of and acpi_create_platform_device() and drop the device reference acquired by it upon the return from that function.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-107209

ImageMagick: Use-After-Free in RSVG decoder that is build without cairo support

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-30 and 6.9.13-55, when ImageMagick is built without Cairo support, a crafted RSVG image that reaches a resource limit can cause the RSVG decoder to free image state twice and then use freed memory, crashing the process. This issue is fixed in versions 7.1.2-30 and 6.9.13-55.

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed

Vendors

Imagemagick

Products

Imagemagick

CVE-2026-16411

Memory safety bugs fixed in Thunderbird 153

Memory safety bugs present in Thunderbird 152. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 153 and Thunderbird 153.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed

Vendors

Mozilla

Products

Firefox

CVE-2026-12317

Memory safety bug fixed in Thunderbird 152

Memory safety bug fixed in Thunderbird 152. This vulnerability was fixed in Firefox 152 and Thunderbird 152.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed

Vendors

Mozilla

Products

Firefox Thunderbird

CVE-2026-12310

Memory safety bug fixed in Thunderbird 152

Memory safety bug fixed in Thunderbird 152. This vulnerability was fixed in Firefox 152, Firefox ESR 140.12, Thunderbird 152, and Thunderbird 140.12.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed

Vendors

Mozilla

Products

Firefox Thunderbird