Search vulnerabilities

Use the Query Builder to create your own search query, or check out the documentation to learn the search syntax.

Results 1,275

Export CSV
CVE-2026-19740

Bluetooth LE Controller: retained RX node leak and reachable assertion in the PHY Update procedure

The Link Layer Control Procedure (LLCP) implementation of the Zephyr software Bluetooth LE Controller retains the receive node that carried an accepted LL_PHY_UPDATE_IND so that it can later be reused for the host notification when the update instant is reached (llcp_rx_node_retain() in subsys/bluetooth/controller/ll_sw/ull_llcp.c, and the node is deliberately not recycled while marked NODE_RX_TYPE_RETAIN). The invalid-PDU arms of llcp_lp_pu_rx() and llcp_rp_pu_rx() in subsys/bluetooth/controller/ll_sw/ull_llcp_phy.c completed the procedure via llcp_lr_complete() / llcp_rr_complete() without first releasing that retained node, so the procedure context — the only remaining reference to the node — was freed while the node was still held out of the receive pool. A peer device on an established LE connection can drive this deterministically and without pairing or encryption. Against a peripheral it sends LL_PHY_REQ, receives LL_PHY_RSP, sends a valid LL_PHY_UPDATE_IND with an instant a few connection events in the future (so the node becomes retained), and then, before the instant is reached, sends any other LL Control PDU such as LL_LENGTH_REQ; ull_cp_rx() routes it to the active remote PHY Update procedure, which takes the invalid-PDU path. The mirror case applies to a locally initiated PHY Update followed by an LL_REJECT_IND. In the default configuration (CONFIG_BT_ASSERT and CONFIG_BT_CTLR_ASSERT_DEBUG both default y) the violated invariant in llcp_lr_check_done() / llcp_rr_check_done() triggers a controller assertion, ending in k_oops() (or k_panic()) — a single crafted PDU sequence from radio range faults the device. With those assertions compiled out, each attempt silently leaks one receive PDU node and its memq link; because the controller receive pool is small (PDU_RX_CNT, driven by CONFIG_BT_CTLR_RX_BUFFERS, which defaults to 1) and each attempt costs the attacker only a reconnect, a few repetitions exhaust the pool and leave Bluetooth inoperable until reboot. On releases v3.4.0 through v3.7.x the assertion is never reached, whatever the configuration, so every attempt leaks silently. The impact is limited to availability: the orphaned node leaves no dangling pointer that is later dereferenced and is never delivered to the host, so there is no memory corruption or information disclosure. The same pull request applies the identical release to the Connection Update and CIS-create procedures, whose invalid-PDU arms had the same omission.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Zephyrproject
Products
Zephyr
CVE-2026-53394

nfsd: avoid leaking pre-allocated openowner on unconfirmed retry race

In the Linux kernel, the following vulnerability has been resolved: nfsd: avoid leaking pre-allocated openowner on unconfirmed retry race When find_or_alloc_open_stateowner() encounters an unconfirmed owner, it calls release_openowner() and sets oo = NULL. Control then falls through past the `if (oo)` guard -- which would have freed any pre-allocated `new` -- and unconditionally executes `new = alloc_stateowner(...)`. If `new` was already allocated on a prior iteration, the pointer is silently overwritten and the previous allocation (slab object + owner name buffer) is leaked. This requires a race: two NFSv4.0 OPEN threads with the same owner string, where a concurrent thread inserts a new unconfirmed owner into the hash between retry iterations. The window is narrow but repeatable under adversarial conditions. Fix by adding `goto retry` after `oo = NULL` so the already-allocated `new` is reused on the next iteration rather than overwritten.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-53005

af_unix: Drop all SCM attributes for SOCKMAP.

In the Linux kernel, the following vulnerability has been resolved: af_unix: Drop all SCM attributes for SOCKMAP. SOCKMAP can hide inflight fd from AF_UNIX GC. When a socket in SOCKMAP receives skb with inflight fd, sk_psock_verdict_data_ready() looks up the mapped socket and enqueue skb to its psock->ingress_skb. Since neither the old nor the new GC can inspect the psock queue, the hidden skb leaks the inflight sockets. Note that this cannot be detected via kmemleak because inflight sockets are linked to a global list. In addition, SOCKMAP redirect breaks the Tarjan-based GC's assumption that unix_edge.successor is always alive, which is no longer true once skb is redirected, resulting in use-after-free below. [0] Moreover, SOCKMAP does not call scm_stat_del() properly, so unix_show_fdinfo() could report an incorrect fd count. sk_msg_recvmsg() does not support any SCM attributes in the first place. Let's drop all SCM attributes before passing skb to the SOCKMAP layer. [0]: BUG: KASAN: slab-use-after-free in unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251) Read of size 8 at addr ffff888125362670 by task kworker/56:1/496 CPU: 56 UID: 0 PID: 496 Comm: kworker/56:1 Not tainted 7.0.0-rc7-00263-gb9d8b856689d #3 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 Workqueue: events sk_psock_backlog Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:379) kasan_report (mm/kasan/report.c:597) unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251) unix_destroy_fpl (net/unix/garbage.c:317) unix_destruct_scm (./include/net/scm.h:80 ./include/net/scm.h:86 net/unix/af_unix.c:1976) sk_psock_backlog (./include/linux/skbuff.h:?) process_scheduled_works (kernel/workqueue.c:?) worker_thread (kernel/workqueue.c:?) kthread (kernel/kthread.c:438) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64.S:258) </TASK> Allocated by task 955: kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78) __kasan_slab_alloc (mm/kasan/common.c:369) kmem_cache_alloc_noprof (mm/slub.c:4539) sk_prot_alloc (net/core/sock.c:2240) sk_alloc (net/core/sock.c:2301) unix_create1 (net/unix/af_unix.c:1099) unix_create (net/unix/af_unix.c:1169) __sock_create (net/socket.c:1606) __sys_socketpair (net/socket.c:1811) __x64_sys_socketpair (net/socket.c:1863 net/socket.c:1860 net/socket.c:1860) do_syscall_64 (arch/x86/entry/syscall_64.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Freed by task 496: kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:587) __kasan_slab_free (mm/kasan/common.c:287) kmem_cache_free (mm/slub.c:6165) __sk_destruct (net/core/sock.c:2282 net/core/sock.c:2384) sk_psock_destroy (./include/net/sock.h:?) process_scheduled_works (kernel/workqueue.c:?) worker_thread (kernel/workqueue.c:?) kthread (kernel/kthread.c:438) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64.S:258)

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-52981

neigh: let neigh_xmit take skb ownership

In the Linux kernel, the following vulnerability has been resolved: neigh: let neigh_xmit take skb ownership neigh_xmit always releases the skb, except when no neighbour table is found. But even the first added user of neigh_xmit (mpls) relied on neigh_xmit to release the skb (or queue it for tx). sashiko reported: If neigh_xmit() is called with an uninitialized neighbor table (for example, NEIGH_ND_TABLE when IPv6 is disabled), it returns -EAFNOSUPPORT and bypasses its internal out_kfree_skb error path. Because the return value of neigh_xmit() is ignored here, does this leak the SKB? Assume full ownership and remove the last code path that doesn't xmit or free skb.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-46102

net: strparser: fix skb_head leak in strp_abort_strp()

In the Linux kernel, the following vulnerability has been resolved: net: strparser: fix skb_head leak in strp_abort_strp() When the stream parser is aborted, for example after a message assembly timeout, it can still hold a reference to a partially assembled message in strp->skb_head. That skb is not released in strp_abort_strp(), which leaks the partially assembled message and can be triggered repeatedly to exhaust memory. Fix this by freeing strp->skb_head and resetting the parser state in the abort path. Leave strp_stop() unchanged so final cleanup still happens in strp_done() after the work and timer have been synchronized.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-19739

Bluetooth LE controller leaks a retained RX node when an unexpected LL Control PDU arrives during a Connection Update

The Bluetooth Link Layer control procedure code in subsys/bluetooth/controller/ll_sw/ull_llcp_conn_upd.c retains the received RX node while a Connection Update / Connection Parameter procedure waits for its instant, so the node can later carry the host notification (llcp_rx_node_retain(), which marks it NODE_RX_TYPE_RETAIN and thereby suppresses the normal recycling in ull.c). The default: arm of llcp_rp_cu_rx() and llcp_lp_cu_rx() — the "invalid PDU, terminate the connection" path — completed the procedure without releasing that retained node. llcp_rr_check_done() then dequeued and freed the procedure context with ctx->node_ref.rx still pointing at the retained node, dropping the last reference to it. A peer device in radio range can reach this without pairing, bonding, or encryption. Against a peripheral, the peer sends a well-formed LL_CONNECTION_UPDATE_IND with an instant a few connection events in the future (the node is retained and the procedure enters RP_CU_STATE_WAIT_INSTANT), then, before the instant is reached, sends any other LL Control PDU such as LL_LENGTH_REQ. ull_cp_rx() routes that PDU into the active remote Connection Update procedure, which takes the invalid-PDU path. The central role is reachable symmetrically after accepting an LL_CONNECTION_PARAM_REQ, and the local-procedure variant is reachable with LL_REJECT_IND. With CONFIG_BT_CTLR_ASSERT_DEBUG enabled (its default), the resulting state violates the invariant asserted in llcp_rr_check_done(), so the two-PDU sequence produces an immediate fatal error in the controller. With those asserts disabled, each occurrence permanently loses one node from the controller's small fixed RX pool (sized from CONFIG_BT_CTLR_RX_BUFFERS, which defaults to 1); repeating the sequence across reconnections exhausts the pool, after which the link-layer receive path operates on a NULL node. The impact is an unauthenticated, remotely triggerable denial of service persisting until reboot; there is no memory-disclosure or memory-corruption consequence, since the leaked node simply becomes unreachable.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Zephyrproject
Products
Zephyr
CVE-2026-31448

ext4: avoid infinite loops caused by residual data

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid infinite loops caused by residual data On the mkdir/mknod path, when mapping logical blocks to physical blocks, if inserting a new extent into the extent tree fails (in this example, because the file system disabled the huge file feature when marking the inode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to reclaim the physical block without deleting the corresponding data in the extent tree. This causes subsequent mkdir operations to reference the previously reclaimed physical block number again, even though this physical block is already being used by the xattr block. Therefore, a situation arises where both the directory and xattr are using the same buffer head block in memory simultaneously. The above causes ext4_xattr_block_set() to enter an infinite loop about "inserted" and cannot release the inode lock, ultimately leading to the 143s blocking problem mentioned in [1]. If the metadata is corrupted, then trying to remove some extent space can do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE was passed, remove space wrongly update quota information. Jan Kara suggests distinguishing between two cases: 1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully consistent and we must maintain its consistency including all the accounting. However these errors can happen only early before we've inserted the extent into the extent tree. So current code works correctly for this case. 2) Some other error - this means metadata is corrupted. We should strive to do as few modifications as possible to limit damage. So I'd just skip freeing of allocated blocks. [1] INFO: task syz.0.17:5995 blocked for more than 143 seconds. Call Trace: inode_lock_nested include/linux/fs.h:1073 [inline] __start_dirop fs/namei.c:2923 [inline] start_dirop fs/namei.c:2934 [inline]

CVSS 3.1 · 9.4 Critical EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-23185

wifi: iwlwifi: mld: cancel mlo_scan_start_wk

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: cancel mlo_scan_start_wk mlo_scan_start_wk is not canceled on disconnection. In fact, it is not canceled anywhere except in the restart cleanup, where we don't really have to. This can cause an init-after-queue issue: if, for example, the work was queued and then drv_change_interface got executed. This can also cause use-after-free: if the work is executed after the vif is freed.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-98426

wifi: mwifiex: fix IRQ leak using wrong index in MSI-X error path

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix IRQ leak using wrong index in MSI-X error path mwifiex_pcie_request_irq() registers each MSI-X vector with a per-index dev_id (&card->msix_ctx[i]). On a request_irq() failure the cleanup loop "for (j = 0; j < i; j++)" frees msix_entries[j].vector but passes the failed index's &card->msix_ctx[i] as the dev_id. free_irq() matches on (irq, dev_id), so it fails to find the action registered with &card->msix_ctx[j]: the already-requested IRQ j is not freed (leaked) and free_irq() warns about freeing a non-existent IRQ. Use &card->msix_ctx[j].

CVSS 3.1 · 7.0 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2018-19139

jasper: memory leak of data allocated in jpc_unk_getparms() after abort in jpc_dec_process_sot()

An issue has been found in JasPer 2.0.14. There is a memory leak in jas_malloc.c when called from jpc_unk_getparms in jpc_cs.c.

CVSS 3.0 · 5.5 Medium EPSS 1.7% KEV · Not listed
Vendors
Debian Jasper Project Redhat
Products
Debian Linux Jasper Fedora
CVE-2026-72370

iomap: release pages on atomic dio size mismatch

In the Linux kernel, the following vulnerability has been resolved: iomap: release pages on atomic dio size mismatch If bio_iov_iter_get_pages() or the bounce helper succeeds but builds a short bio, the REQ_ATOMIC size check rejects it before submission. The old error path only dropped the bio reference, leaving any pages already attached to the bio unreleased. Release or unbounce the pages before falling through to out_put_bio on this error path. This bug was reported by sashiko: https://sashiko.dev/#/patchset/20260608073134.95964-1-changfengnan%40bytedance.com

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64020

nvme-pci: fix dma_vecs leak on p2p memory

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix dma_vecs leak on p2p memory We don't unmap P2P memory, so we don't need to track it. The dma_vec allocation was getting leaked on the completion.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64019

nvme-pci: fix dma mapping leak on data setup error

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix dma mapping leak on data setup error We're leaking the initial DMA mapping during iteration if we fail to allocate the tracking descriptor for both PRP and SGL. Unmap the iterator directly; we can't use the existing unmap helper because it depends on the tracking descriptor being successfully allocated, so a new one for an in-use iterator is provided. The mappings were also leaking when the driver detects an invalid bio_vec when mapping PRPs, so fix that too.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64013

ACPI: button: Fix ACPI GPE handler leak during removal

In the Linux kernel, the following vulnerability has been resolved: ACPI: button: Fix ACPI GPE handler leak during removal Commit a7e23ec17fee ("ACPI: button: Install notifier for system events as well") changed the ACPI notify handler type for ACPI buttons to ACPI_ALL_NOTIFY, but it forgot to update acpi_button_remove() to reflect that change. This leads to leaking the notify handler past driver removal, which may cause a kernel crash to occur if ACPI notify on the given device is triggered after removing the driver, and causes a subsequent probe of the given device with the same driver to fail. Address this by updating the acpi_remove_notify_handler() call in acpi_button_remove() as appropriate.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-109262

ImageMagick before 6.9.13-57 and 7.x before 7.1.2-32 Memory Leak in SVG Encoder

ImageMagick before 6.9.13-57 and 7.x before 7.1.2-32 contains a memory leak in the SVG encoder (WriteSVGImage) that fails to release allocated memory when handling crafted images. Attackers can supply crafted image files that are processed by the SVG encoder to leak memory and cause a denial of service through resource consumption.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Imagemagick
Products
Imagemagick
CVE-2026-31658

net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit()

In the Linux kernel, the following vulnerability has been resolved: net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit() When dma_map_single() fails in tse_start_xmit(), the function returns NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the stack the packet was consumed, the skb is never freed, leaking memory on every DMA mapping failure. Add dev_kfree_skb_any() before returning to properly free the skb.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-23339

nfc: nci: free skb on nci_transceive early error paths

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: free skb on nci_transceive early error paths nci_transceive() takes ownership of the skb passed by the caller, but the -EPROTO, -EINVAL, and -EBUSY error paths return without freeing it. Due to issues clearing NCI_DATA_EXCHANGE fixed by subsequent changes the nci/nci_dev selftest hits the error path occasionally in NIPA, and kmemleak detects leaks: unreferenced object 0xff11000015ce6a40 (size 640): comm "nci_dev", pid 3954, jiffies 4295441246 hex dump (first 32 bytes): 6b 6b 6b 6b 00 a4 00 0c 02 e1 03 6b 6b 6b 6b 6b kkkk.......kkkkk 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace (crc 7c40cc2a): kmem_cache_alloc_node_noprof+0x492/0x630 __alloc_skb+0x11e/0x5f0 alloc_skb_with_frags+0xc6/0x8f0 sock_alloc_send_pskb+0x326/0x3f0 nfc_alloc_send_skb+0x94/0x1d0 rawsock_sendmsg+0x162/0x4c0 do_syscall_64+0x117/0xfc0

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2024-2398

HTTP/2 push headers memory-leak

When an application tells libcurl it wants to allow HTTP/2 server push, and the amount of received headers for the push surpasses the maximum allowed limit (1000), libcurl aborts the server push. When aborting, libcurl inadvertently does not free all the previously allocated headers and instead leaks the memory. Further, this error condition fails silently and is therefore not easily detected by an application.

CVSS 3.1 · 8.6 High EPSS 36.1% KEV · Not listed
Vendors
Apple Curl Fedoraproject and 3 more
Products
Macos Curl Fedora and 24 more
CVE-2026-19937

Bluetooth Mesh Access layer permanently leaks delayable-message contexts, disabling all model responses

The Bluetooth Mesh Access layer delayable-message machinery in subsys/bluetooth/mesh/delayable_msg.c manages a static pool of CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG_COUNT message contexts (default 4) threaded onto a free_ctx or busy_ctx list. release_delayable_msg_ctx() returned a context to free_ctx only when sys_slist_find_and_remove() found it on busy_ctx. The chunk-exhaustion error path in bt_mesh_delayable_msg_manage() releases a context that was already popped off free_ctx but not yet inserted on busy_ctx, so the context was appended to neither list and was permanently lost from the pool. Because bt_mesh_delayable_msg_init() runs only once from bt_mesh_init(), and node reset/suspend only drain busy_ctx, the loss survives unprovision, re-provision and suspend/resume — it is cleared only by a reboot. The error path is reached when the chunk pool (CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG_CHUNK_COUNT, default 40 chunks) is short of the chunks a new delayed message needs and the oldest pending message cannot be flushed because bt_mesh_access_send() returns -EBUSY or -ENOBUFS (all segmented-TX contexts busy, or advertising/segment buffers exhausted). A peer that is provisioned into the mesh network — holding a valid NetKey plus an AppKey or DevKey bound to a server model — can drive both conditions by flooding the victim with requests that elicit segmented responses while withholding the Segment Acknowledgment, which keeps the transmit contexts occupied while queued responses hold the chunk pool. Each further request that arrives in that window leaks one context. Once the pool is drained, bt_mesh_delayable_msg_manage() returns -ENOMEM for every subsequent send and bt_mesh_model_send() propagates that error with no fallback to an immediate transmit. Since CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG and CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG_CTX_ENABLED are both enabled by default, ctx->rnd_delay is set for every received access message, so all replies from Configuration Server, Health Server and application server models are silently dropped. The node keeps receiving and processing traffic but never answers, a persistent denial of service until the device is restarted. There is no memory corruption, information disclosure or integrity impact; releases before the fix compute the chunk count from the transmit buffer capacity rather than its payload length, making chunk-pool starvation — and therefore the leak — considerably easier to provoke.

CVSS 3.1 · 5.7 Medium EPSS < 1% KEV · Not listed
Vendors
Zephyrproject
Products
Zephyr