Search vulnerabilities

Results 30,259

Export CSV
CVE-2026-90058

net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup

In the Linux kernel, the following vulnerability has been resolved: net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup qdisc_get_stab() accepts a user-supplied size table, and __qdisc_calculate_pkt_len() amplifies qdisc_pkt_len() through the overhead, the size-table data (u16), and size_log (up to STAB_SIZE_LOG_MAX). A crafted stab can therefore set qdisc_pkt_len() to ~1 GiB for an ordinary skb. Per-flow deficit schedulers such as DRR and ETS replenish one quantum per loop iteration; with a tiny quantum (1) they spin billions of times under the qdisc lock, producing a soft lockup / RCU stall as illustrated by vega@nebusec.ai. Cap the final qdisc_pkt_len() to QDISC_PKT_LEN_MAX so the size-table amplification cannot drive deficit schedulers into an unbounded loop. A legitimate size table (e.g. qfq's overhead 999999999, which is handled by dropping) is still accepted. Introduce cap QDISC_PKT_LEN_MAX (1 << 20) = 1 MiB which is well above any legitimate single-skb wire length: the largest current skb->len is GSO_MAX_SIZE (524280), and an ATM-style size table (53/48 cell tax) amplifies that to ~578 KB, both comfortably below 1 MiB. At the same time, 1 MiB bounds the deficit refill loop to ~1M iterations per packet with quantum=1, which completes in a few milliseconds well under the demonstrated softlockup threshold (~10^9 iterations). Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_NET_SCH_DRR=y (or CONFIG_NET_SCH_ETS=y). - Attach a DRR (or ETS) root qdisc with a crafted TCA_STAB that amplifies qdisc_pkt_len to ~1 GiB (e.g. size_log=15, data=[32768]). - Add a class with a tiny quantum of 1 and send one small packet; the deficit loop spins billions of times under the qdisc lock and trips the softlockup detector (panic with kernel.softlockup_panic=1). - Reachable as root or from an unprivileged user in a fresh user+net namespace (unshare -Urn) with namespace-local CAP_NET_ADMIN.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90067

libceph: validate banner payload length

In the Linux kernel, the following vulnerability has been resolved: libceph: validate banner payload length When parsing the Ceph messenger v2 protocol banner, the `payload_len` field is decoded from the banner prefix. If a client sends a banner with a `payload_len` of 0, the kernel sets up a 0-length socket read. This violates an invariant in the state machine, triggering a warning in `populate_in_iter()`: ------------[ cut here ]------------ !iov_iter_count(&con->v2.in_iter) WARNING: net/ceph/messenger_v2.c:3129 at populate_in_iter net/ceph/messenger_v2.c:3129 [inline], CPU#1: kworker/1:3/5070 WARNING: net/ceph/messenger_v2.c:3129 at ceph_con_v2_try_read+0x6634/0x6810 net/ceph/messenger_v2.c:3159, CPU#1: kworker/1:3/5070 ... Call Trace: <TASK> ceph_con_workfn+0x1f5/0x14a0 net/ceph/messenger.c:1575 process_one_work kernel/workqueue.c:3322 [inline] process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405 worker_thread+0xa47/0xfb0 kernel/workqueue.c:3486 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> According to the msgr2 protocol specification, the banner payload is expected to contain at least two 64-bit integers (`server_feat` and `server_req_feat`). Therefore, `payload_len` must be at least 16 bytes. Fix this by adding a check in `process_banner_prefix()` to reject a `payload_len` smaller than 16 bytes. This prevents the 0-length read and correctly aborts the connection with a protocol error.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90094

arm64: process: Fix context switching MTE store-only tag check

In the Linux kernel, the following vulnerability has been resolved: arm64: process: Fix context switching MTE store-only tag check SCTLR_EL1.TCSO0 is set when user opt-in for MTE store-only tag check mode. However, it is not part of SCTLR_USER_MASK which imply that on context switch we never clear SCTLR_EL1.TCSO0, so we are leaking that setting into another task. Fix that by including SCTLR_EL1_TCSO0_MASK into SCTLR_USER_MASK

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90088

Bluetooth: RFCOMM: Validate MTU in rfcomm_apply_pn() to prevent infinite loop

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Validate MTU in rfcomm_apply_pn() to prevent infinite loop rfcomm_apply_pn() accepts the MTU value from a remote PN (Parameter Negotiation) frame without checking for zero. When the remote peer sends an MTU of zero, d->mtu is set to 0. This causes the sendmsg path to enter an infinite loop when fragmenting data, as each fragment has size == min_t(size_t, len, 0) == 0, so the remaining length never decreases. The infinite allocation of zero-length skbs exhausts all system memory. Fix by clamping d->mtu to RFCOMM_DEFAULT_MTU when the negotiated value is zero, consistent with the initial value assigned in rfcomm_dlc_alloc().

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90089

Bluetooth: btnxpuart: Validate the FW dump header length

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Validate the FW dump header length nxp_process_fw_dump() pulls the ACL header off the frame and then reads seq_num and buf_len from a struct nxp_fw_dump_hdr placed at skb->data, without checking that the ACL payload is long enough to contain it. h4_recv_buf() collects HCI_ACL_HDR_SIZE bytes of header followed by the number of payload bytes named in that header, so skb->len is 4 + dlen with dlen supplied by the controller and possibly smaller than the 8 byte dump header, or zero. A short frame with connection handle 0xfff therefore reads both fields from beyond the received data. Beyond the read itself, buf_len is what terminates a dump: a value of zero makes the driver call hci_devcd_complete() and reset the controller, so a truncated frame can end a dump early. Use skb_pull_data() to validate and pull the FW dump header before accessing its fields. Warn and reject the chunk if the header is truncated.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90110

inetpeer: randomize RB-tree node comparison using SipHash

In the Linux kernel, the following vulnerability has been resolved: inetpeer: randomize RB-tree node comparison using SipHash The inetpeer rate limiting system stores peer entries in a Red-Black tree keyed deterministically on the remote IP address. Because tree lookups walk the RB-tree using standard lexicographical comparisons (inetpeer_addr_cmp), an off-path adversary can predict the exact topology of the tree and the sequence of nodes traversed during lookups (the gc_stack candidate list). By combining deterministic tree traversal with aggressive garbage collection (triggered when tree size exceeds inet_peer_threshold), an attacker can selectively force the eviction of targeted inet_peer nodes. When an evicted node is subsequently re-created upon receiving a new packet, its rate-limiting token bucket (rate_tokens, rate_last) is reset to full capacity. This creates a side-channel primitive allowing off-path attackers to bypass IP-keyed ICMP rate limits and infer open UDP ports (similar to SAD DNS style attacks). Mitigate this by randomizing the RB-tree node comparison logic using SipHash with a secret key (inetpeer_hash_key) initialized via net_get_random_once(). Nodes are ordered in the tree by SipHash(addr, key) rather than raw IP addresses. Because the secret key is unknown to external entities, the tree layout and lookup traversal paths are unpredictable to off-path adversaries, breaking the deterministic eviction gadget. Cache the computed 64-bit SipHash (hash) in struct inet_peer and compute the target hash (dhash) once at the beginning of inet_getpeer() to avoid recomputing SipHash at every step of the RB-tree walk.

CVSS 3.1 · 9.4 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90379

wifi: mt76: mt7921: Add PCIe AER handler support to prevent system crash

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: Add PCIe AER handler support to prevent system crash When an AER error occurs and the bus is hung, the register reads return 0xFFFFFFFF, causing the DMA queue state to be corrupted and resulting in an invalid memory access when accessing q->desc[] or q->entry[]. Unable to handle kernel paging request at virtual address ffffffc01099eac0 pc : mt76_dma_add_buf+0x124/0x188 [mt76] lr : mt76_dma_rx_fill+0x11c/0x1d8 [mt76] sp : ffffffc016d9bbf0 x29: ffffffc016d9bc10 x28: 0000000000000000 x27: 0000000000000000 x26: ffffffb7855e50b8 x25: ffffffb80d04f000 x24: 0000000000000000 x23: 0000000000000ec0 x22: ffffffb796803648 x21: ffffffb796801f80 x20: ffffffb7968035f8 x19: 0000000000000ec0 x18: 0000000000000000 x17: 000000004ec00000 x16: 000000000ec00000 x15: ffffffc01099eac0 x14: 000000004ec00000 x13: 00000000ffc5a000 x12: ffffffc016d9bc32 x11: 00000000ffffffff x10: 0000000000000002 x9 : 0000000000000000 x8 : 000000000000b4ac x7 : 0000000000000a20 x6 : ffffffb6c1806400 x5 : 0000000000000000 x4 : ffffffb80d04f000 x3 : 0000000000000000 x2 : 0000000000000001 x1 : 000000000ec04000 x0 : ffffffb7968035f8 Call trace: mt76_dma_add_buf+0x124/0x188 [mt76 (HASH:1029 4)] mt76_dma_rx_reset+0xe8/0xfc [mt76 (HASH:1029 4)] mt7921_wpdma_reset+0x188/0x1b0 [mt7921e (HASH:ee48 5)] mt7921e_mac_reset+0x128/0x418 [mt7921e (HASH:ee48 5)] mt7921_mac_reset_work+0xac/0x1a8 [mt7921_common (HASH:f721 6)] process_one_work+0x188/0x514 worker_thread+0x12c/0x300 kthread+0x140/0x1fc ret_from_fork+0x10/0x30 Fix the invalid memory access by validating the DMA index read from the hardware before it is used as a queue index. An out-of-range value, such as the 0xFFFFFFFF returned while the bus is hung, is now clamped so it can no longer corrupt q->head or q->tail. In addition, check the bus_hung flag in mt7921_mac_reset_work() before attempting the reset sequence, reject MCU messages while the bus is hung, and install no-op bus operations when an unrecoverable AER error is detected, preventing further invalid hardware accesses. Due to hardware limitations - such as the lack of a connected hardware reset pin or the absence of host re-probe functionality - affected Wi-Fi devices may not fully recover to a normal operational state after certain errors, even with AER enabled.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90175

smb: server: fix leak of ksmbd_ipc_login_request_ext() returned buffer

In the Linux kernel, the following vulnerability has been resolved: smb: server: fix leak of ksmbd_ipc_login_request_ext() returned buffer Free it unconditionally after ksmbd_alloc_user() calls. kmemleak splat: unreferenced object 0xffff888103b83540 (size 192): comm "pool-0", pid 16970, jiffies 4377290937 hex dump (first 32 bytes): 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 408ccc66): __kvmalloc_node_noprof+0x730/0x920 handle_generic_event+0xec/0x1a0 [ksmbd] genl_family_rcv_msg_doit+0xe0/0x130 genl_rcv_msg+0x181/0x290 netlink_rcv_skb+0x4f/0x100 genl_rcv+0x28/0x40 netlink_unicast+0x1e6/0x2c0 netlink_sendmsg+0x20a/0x450 ____sys_sendmsg+0x2e8/0x310 ___sys_sendmsg+0x78/0xc0 __sys_sendmsg+0x63/0xc0 do_syscall_64+0xa1/0x670 entry_SYSCALL_64_after_hwframe+0x76/0x7e

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90191

mailbox: riscv-sbi-mpxy: validate RPMI notification lengths

In the Linux kernel, the following vulnerability has been resolved: mailbox: riscv-sbi-mpxy: validate RPMI notification lengths The SBI return value controls how many bytes are copied from shared memory into the RPMI notification buffer. It is not validated against the negotiated shared-memory size before that copy. The event walker also uses a reversed loop condition and can inspect a short event record. Validate the complete notification length before copying it, iterate only while a full event header remains, and stop when a declared event payload extends beyond the copied notification data.

CVSS 3.1 · 8.4 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90157

bpf: Reject negative optlen in cgroup getsockopt hook

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative optlen in cgroup getsockopt hook A cgroup getsockopt BPF program can shrink ctx->optlen after the kernel getsockopt handler has run. The kernel-buffer variant, used by TCP_ZEROCOPY_RECEIVE, only rejects values larger than the original length. If BPF writes a negative optlen, that value is accepted and propagated back to the TCP getsockopt code. It can then be passed to copy_to_sockptr() as a size_t and trigger the hardened usercopy bytes > INT_MAX warning. Reject negative ctx.optlen in __cgroup_bpf_run_filter_getsockopt_kern(), matching the lower-bound validation already present in the sockptr-based getsockopt hook.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90160

lwt_bpf: Restore reserved headroom after xmit program

In the Linux kernel, the following vulnerability has been resolved: lwt_bpf: Restore reserved headroom after xmit program ip_finish_output2() expands an skb to LL_RESERVED_SPACE(dev) before LWT xmit. An LWT_XMIT BPF program can then modify the skb head and still return BPF_OK, so bpf_xmit() rechecks the remaining headroom before the skb continues to neighbour output. That recheck uses dst->dev->hard_header_len. This is not enough for the neighbour cached-header path: neigh_hh_output() copies the cached hardware header using the aligned hh_cache size, HH_DATA_MOD for short headers or HH_DATA_ALIGN(hh_len) otherwise. On Ethernet, hard_header_len is 14 but the cached copy needs 16 bytes. If an LWT_XMIT BPF program calls bpf_skb_change_head(skb, 1, 0), the skb can still have 15 bytes of headroom after the program. The existing check accepts that, after which neigh_hh_output() hits its headroom warning and drops the skb. Use LL_RESERVED_SPACE(dst->dev) in the post-BPF headroom check to match the reservation made before LWT xmit.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90199

fs/ntfs3: reject out-of-range evcn in mi_enum_attr()

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: reject out-of-range evcn in mi_enum_attr() In mi_enum_attr(), the start/end VCN validation for non-resident attributes is: if (svcn > evcn + 1) goto out; When evcn is U64_MAX the "evcn + 1" expression wraps to 0 and any svcn passes the check. For evcn values close to U64_MAX (but not equal to it) the right-hand side is still a meaningless near-wrap upper bound, so a malformed on-disk attribute with svcn == 0 and evcn near U64_MAX can pass mi_enum_attr() unrejected. VCN (virtual cluster number) is a cluster index, so any valid evcn is bounded by the volume's total cluster count, which ntfs3 holds in sbi->used.bitmap.nbits (set up in ntfs_init_from_boot() before any caller of mi_enum_attr() runs). Reject evcn values that fall outside this range. However, an empty non-resident attribute (no allocated clusters) is legitimately encoded with svcn == 0 and evcn == -1 (U64_MAX), e.g. via attr->nres.evcn = cpu_to_le64((u64)vcn - 1) with vcn == 0. That sentinel must keep passing, so exclude evcn == U64_MAX from the range check. The existing "svcn > evcn + 1" test still tolerates the sentinel ("0 > 0" is false) and continues to require svcn == 0 for it, while the range check rejects every other out-of-range evcn and thereby also defuses the "evcn + 1" wraparound. svcn does not need its own bound: once evcn < nbits, "svcn > evcn + 1" implies svcn <= nbits. [almaz.alexandrovich@paragon-software.com: fixed evcn check]

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90425

iommu/tegra241-cmdqv: Require exactly one Stream ID for a vSID

In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Require exactly one Stream ID for a vSID tegra241_vintf_init_vsid() maps a guest vSID to a single physical Stream ID taken from master->streams[0], and only warns when the device does not have exactly one stream. A device with several streams gets only its first one mapped, so a guest vSID invalidation cannot reach the others' ATC and IOTLB entries; a device with none makes master->streams a ZERO_SIZE_PTR, read out of bounds. Reject the mapping with -EOPNOTSUPP if master->num_streams is not one.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90257

Bluetooth: virtio_bt: avoid OOB read of build info string

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: virtio_bt: avoid OOB read of build info string The virtbt_setup_zephyr() sends the Zephyr vendor command 0xfc08 (Read Build Information) and hands the response to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at skb->data + 1, without checking the length. A backend that answers with status only leaves that pointer past the end of the received data, so the walk reads adjacent slab memory until it meets a NUL. Those bytes reach the kernel log and the firmware-info debugfs file. To fix this, print the string with a bounded "%.*s" limited to skb->len - 1. A short or unterminated response then prints as much as arrived instead of failing setup. This mirrors commit dd068ef04412 ("Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()"), which fixed the identical pattern.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90272

perf: arm_pmuv3: Zero initialize hw_id branch stack field

In the Linux kernel, the following vulnerability has been resolved: perf: arm_pmuv3: Zero initialize hw_id branch stack field PERF_SAMPLE_BRANCH_HW_INDEX is supported by BRBE so hw_id is passed to userspace, but it's never set by the BRBE driver. Zero initialize it as it should be according to the docs: * For the architectures whose raw branch records are * already stored in age order, the hw_idx should be 0. It's probably too risky to remove PERF_SAMPLE_BRANCH_HW_INDEX from BRBE now in case anyone is setting it and reading the value, but zero initializing the whole struct also protects against the same issue with new fields that are added in the future.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-81875

HAPI FHIR: SHCParser unbounded DEFLATE decompression causes denial of service

HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to version 6.9.12, SHCParser in org.hl7.fhir.r5/src/main/java/org/hl7/fhir/r5/elementmodel/SHCParser.java can consume attacker-controlled Smart Health Card JWT content whose header contains zip: "DEF" and whose small raw-DEFLATE payload expands to a very large value. SHCParser.decodeJWT() passes the decoded payload to SHCParser.inflate(), which accumulates all decompressed bytes in a ByteArrayOutputStream without an output-size limit before JSON parsing, and SHCParser.decompress() contains the same unbounded pattern. An application or validator service that accepts attacker-supplied SHC content can therefore suffer excessive heap allocation, severe garbage-collection pressure, request failure, process instability, or process termination. This issue is fixed in version 6.9.12.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-81876

HAPI FHIR: SHCParser DEFLATE infinite loop causes denial of service

HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to version 6.9.12, SHCParser in org.hl7.fhir.r5/src/main/java/org/hl7/fhir/r5/elementmodel/SHCParser.java can enter an infinite loop while processing attacker-controlled Smart Health Card JWT content whose header contains zip: "DEF" and whose raw-DEFLATE payload is empty or truncated. SHCParser.decodeJWT() reaches SHCParser.inflate(), where Inflater.inflate() can return zero while Inflater.finished() remains false and Inflater.needsInput() is true. The loop also lacks an Inflater.needsDictionary() termination check, SHCParser.decompress() contains the same zero-progress pattern, and ResourceChecker.java can reach SHC parsing during file-format detection. A malformed validation request can pin a JVM worker thread indefinitely, and concurrent requests can exhaust all validation workers. This issue is fixed in version 6.9.12.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-20237

Cisco Identity Services Engine Hardening Release - Input Validation Vulnerabilities

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC), engineering teams have conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20237 are related to improper input validation issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-20.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-20360

Cisco Nexus Dashboard Software Security Hardening Release September 2026 - Information Exposure & Insecure Handling

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Nexus Dashboard engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20360 are related to information exposure and insecure handling issues that are grouped under the Common Weakness Enumeration (CWE) CWE-200.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-89278

GPTranslate <= 2.34.6 - Unauthenticated Sensitive Information Exposure in Public Frontend Inline Script

The GPTranslate – Multilingual AI Translation Agent for WordPress: Translate Your Site with AI plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.34.6 via the enqueue_frontend_scripts. This makes it possible for unauthenticated attackers to extract the plaintext third-party AI provider API key (OpenAI, DeepL, xAI/Grok, Gemini, Claude, or Google Cloud Translation) — a credential granting billed account access — by fetching any public page and applying the inverse transformation bundled in the plugin's own public JavaScript asset. This exposure affects the default configuration (gpt-3.5-turbo in client mode) and all supported non-DeepSeek providers; only deepseek-* models and gpt-* models configured in server-proxy mode correctly suppress key emission.