CVE-2026-43180

net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode

In the Linux kernel, the following vulnerability has been resolved: net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls netif_stop_queue() and netif_wake_queue(). These are TX queue flow control functions unrelated to RX multicast configuration. The premature netif_wake_queue() can re-enable TX while tx_urb is still in-flight, leading to a double usb_submit_urb() on the same URB: kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); } kaweth_set_rx_mode() { netif_stop_queue(); netif_wake_queue(); // wakes TX queue before URB is done } kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); // URB submitted while active } This triggers the WARN in usb_submit_urb(): "URB submitted while active" This is a similar class of bug fixed in rtl8150 by - commit 958baf5eaee3 ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast"). Also kaweth_set_rx_mode() is already functionally broken, the real set_rx_mode action is performed by kaweth_async_set_rx_mode(), which in turn is not a no-op only at ndo_open() time.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-43158

xfs: fix freemap adjustments when adding xattrs to leaf blocks

In the Linux kernel, the following vulnerability has been resolved: xfs: fix freemap adjustments when adding xattrs to leaf blocks xfs/592 and xfs/794 both trip this assertion in the leaf block freemap adjustment code after ~20 minutes of running on my test VMs: ASSERT(ichdr->firstused >= ichdr->count * sizeof(xfs_attr_leaf_entry_t) + xfs_attr3_leaf_hdr_size(leaf)); Upon enabling quite a lot more debugging code, I narrowed this down to fsstress trying to set a local extended attribute with namelen=3 and valuelen=71. This results in an entry size of 80 bytes. At the start of xfs_attr3_leaf_add_work, the freemap looks like this: i 0 base 448 size 0 rhs 448 count 46 i 1 base 388 size 132 rhs 448 count 46 i 2 base 2120 size 4 rhs 448 count 46 firstused = 520 where "rhs" is the first byte past the end of the leaf entry array. This is inconsistent -- the entries array ends at byte 448, but freemap[1] says there's free space starting at byte 388! By the end of the function, the freemap is in worse shape: i 0 base 456 size 0 rhs 456 count 47 i 1 base 388 size 52 rhs 456 count 47 i 2 base 2120 size 4 rhs 456 count 47 firstused = 440 Important note: 388 is not aligned with the entries array element size of 8 bytes. Based on the incorrect freemap, the name area starts at byte 440, which is below the end of the entries array! That's why the assertion triggers and the filesystem shuts down. How did we end up here? First, recall from the previous patch that the freemap array in an xattr leaf block is not intended to be a comprehensive map of all free space in the leaf block. In other words, it's perfectly legal to have a leaf block with: * 376 bytes in use by the entries array * freemap[0] has [base = 376, size = 8] * freemap[1] has [base = 388, size = 1500] * the space between 376 and 388 is free, but the freemap stopped tracking that some time ago If we add one xattr, the entries array grows to 384 bytes, and freemap[0] becomes [base = 384, size = 0]. So far, so good. But if we add a second xattr, the entries array grows to 392 bytes, and freemap[0] gets pushed up to [base = 392, size = 0]. This is bad, because freemap[1] hasn't been updated, and now the entries array and the free space claim the same space. The fix here is to adjust all freemap entries so that none of them collide with the entries array. Note that this fix relies on commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow") and the previous patch that resets zero length freemap entries to have base = 0.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-43133

KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state") made KVM always use vmcb01 for the fields controlled by VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code to always use vmcb01. As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01 instead of the current VMCB.

CVSS 3.1 · 7.9 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-43033

crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption

In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption When decrypting data that is not in-place (src != dst), there is no need to save the high-order sequence bits in dst as it could simply be re-copied from the source. However, the data to be hashed need to be rearranged accordingly. Thanks,

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-43030

bpf: Fix regsafe() for pointers to packet

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix regsafe() for pointers to packet In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N regsafe() may return true which may lead to current state with valid packet range not being explored. Fix the bug.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-31774

io_uring/net: fix slab-out-of-bounds read in io_bundle_nbufs()

In the Linux kernel, the following vulnerability has been resolved: io_uring/net: fix slab-out-of-bounds read in io_bundle_nbufs() sqe->len is __u32 but gets stored into sr->len which is int. When userspace passes sqe->len values exceeding INT_MAX (e.g. 0xFFFFFFFF), sr->len overflows to a negative value. This negative value propagates through the bundle recv/send path: 1. io_recv(): sel.val = sr->len (ssize_t gets -1) 2. io_recv_buf_select(): arg.max_len = sel->val (size_t gets 0xFFFFFFFFFFFFFFFF) 3. io_ring_buffers_peek(): buf->len is not clamped because max_len is astronomically large 4. iov[].iov_len = 0xFFFFFFFF flows into io_bundle_nbufs() 5. io_bundle_nbufs(): min_t(int, 0xFFFFFFFF, ret) yields -1, causing ret to increase instead of decrease, creating an infinite loop that reads past the allocated iov[] array This results in a slab-out-of-bounds read in io_bundle_nbufs() from the kmalloc-64 slab, as nbufs increments past the allocated iovec entries. BUG: KASAN: slab-out-of-bounds in io_bundle_nbufs+0x128/0x160 Read of size 8 at addr ffff888100ae05c8 by task exp/145 Call Trace: io_bundle_nbufs+0x128/0x160 io_recv_finish+0x117/0xe20 io_recv+0x2db/0x1160 Fix this by rejecting negative sr->len values early in both io_sendmsg_prep() and io_recvmsg_prep(). Since sqe->len is __u32, any value > INT_MAX indicates overflow and is not a valid length.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-31739

crypto: tegra - Add missing CRYPTO_ALG_ASYNC

In the Linux kernel, the following vulnerability has been resolved: crypto: tegra - Add missing CRYPTO_ALG_ASYNC The tegra crypto driver failed to set the CRYPTO_ALG_ASYNC on its asynchronous algorithms, causing the crypto API to select them for users that request only synchronous algorithms. This causes crashes (at least). Fix this by adding the flag like what the other drivers do. Also remove the unnecessary CRYPTO_ALG_TYPE_* flags, since those just get ignored and overridden by the registration function anyway.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-110450

Privilege Escalation via Repair Operation in Nix and Lix

Nix before 2.35.3 and Lix before 2.95.4 allow privilege escalation via a repair operation because it could destroy and then replace a store path before content verification.

CVSS 3.1 · 8 High EPSS < 1% KEV · Not listed

Vendors

Nixos

Products

Nix

CVE-2026-112251

antoinersx clawhost Reverse Proxy reverseProxy.ts handleRequest redirect

A vulnerability was detected in antoinersx clawhost up to 0.0.45. This affects the function handleRequest of the file apps/clawhostgo/src/main/services/reverseProxy.ts of the component Reverse Proxy. Performing a manipulation of the argument token results in open redirect. The attack can be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

CVSS 4.0 · 5.3 Medium EPSS < 1% KEV · Not listed

Vendors

Antoinersx

Products

Clawhost

CVE-2026-111939

Frappe Helpdesk before 1.26.0 Authorization Bypass via raised_by in Ticket Creation

Frappe Helpdesk before 1.26.0 contains an authorization bypass vulnerability that allows authenticated portal users to create tickets impersonating other customers by supplying a raised_by value. Attackers can call the hd_ticket.api.new endpoint with a victim's email to plant phishing tickets in their portal and read their replies via get_ticket_activities.

CVSS 4.0 · 5.1 Medium EPSS < 1% KEV · Not listed

Vendors

Frappe

Products

Helpdesk

CVE-2026-31693

cifs: some missing initializations on replay

In the Linux kernel, the following vulnerability has been resolved: cifs: some missing initializations on replay In several places in the code, we have a label to signify the start of the code where a request can be replayed if necessary. However, some of these places were missing the necessary reinitializations of certain local variables before replay. This change makes sure that these variables get initialized after the label.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-31667

Input: uinput - fix circular locking dependency with ff-core

In the Linux kernel, the following vulnerability has been resolved: Input: uinput - fix circular locking dependency with ff-core A lockdep circular locking dependency warning can be triggered reproducibly when using a force-feedback gamepad with uinput (for example, playing ELDEN RING under Wine with a Flydigi Vader 5 controller): ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex The cycle is caused by four lock acquisition paths: 1. ff upload: input_ff_upload() holds ff->mutex and calls uinput_dev_upload_effect() -> uinput_request_submit() -> uinput_request_send(), which acquires udev->mutex. 2. device create: uinput_ioctl_handler() holds udev->mutex and calls uinput_create_device() -> input_register_device(), which acquires input_mutex. 3. device register: input_register_device() holds input_mutex and calls kbd_connect() -> input_register_handle(), which acquires dev->mutex. 4. evdev release: evdev_release() calls input_flush_device() under dev->mutex, which calls input_ff_flush() acquiring ff->mutex. Fix this by introducing a new state_lock spinlock to protect udev->state and udev->dev access in uinput_request_send() instead of acquiring udev->mutex. The function only needs to atomically check device state and queue an input event into the ring buffer via uinput_dev_event() -- both operations are safe under a spinlock (ktime_get_ts64() and wake_up_interruptible() do not sleep). This breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in the lock ordering and cannot form cycles with mutexes. To keep state transitions visible to uinput_request_send(), protect writes to udev->state in uinput_create_device() and uinput_destroy_device() with the same state_lock spinlock. Additionally, move init_completion(&request->done) from uinput_request_send() to uinput_request_submit() before uinput_request_reserve_slot(). Once the slot is allocated, uinput_flush_requests() may call complete() on it at any time from the destroy path, so the completion must be initialised before the request becomes visible. Lock ordering after the fix: ff->mutex -> state_lock (spinlock, leaf) udev->mutex -> state_lock (spinlock, leaf) udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge)

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-31598

ocfs2: fix possible deadlock between unlink and dio_end_io_write

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix possible deadlock between unlink and dio_end_io_write ocfs2_unlink takes orphan dir inode_lock first and then ip_alloc_sem, while in ocfs2_dio_end_io_write, it acquires these locks in reverse order. This creates an ABBA lock ordering violation on lock classes ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE] and ocfs2_file_ip_alloc_sem_key. Lock Chain #0 (orphan dir inode_lock -> ip_alloc_sem): ocfs2_unlink ocfs2_prepare_orphan_dir ocfs2_lookup_lock_orphan_dir inode_lock(orphan_dir_inode) <- lock A __ocfs2_prepare_orphan_dir ocfs2_prepare_dir_for_insert ocfs2_extend_dir ocfs2_expand_inline_dir down_write(&oi->ip_alloc_sem) <- Lock B Lock Chain #1 (ip_alloc_sem -> orphan dir inode_lock): ocfs2_dio_end_io_write down_write(&oi->ip_alloc_sem) <- Lock B ocfs2_del_inode_from_orphan() inode_lock(orphan_dir_inode) <- Lock A Deadlock Scenario: CPU0 (unlink) CPU1 (dio_end_io_write) ------ ------ inode_lock(orphan_dir_inode) down_write(ip_alloc_sem) down_write(ip_alloc_sem) inode_lock(orphan_dir_inode) Since ip_alloc_sem is to protect allocation changes, which is unrelated with operations in ocfs2_del_inode_from_orphan. So move ocfs2_del_inode_from_orphan out of ip_alloc_sem to fix the deadlock.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-31479

drm/xe: always keep track of remap prev/next

In the Linux kernel, the following vulnerability has been resolved: drm/xe: always keep track of remap prev/next During 3D workload, user is reporting hitting: [ 413.361679] WARNING: drivers/gpu/drm/xe/xe_vm.c:1217 at vm_bind_ioctl_ops_unwind+0x1e2/0x2e0 [xe], CPU#7: vkd3d_queue/9925 [ 413.361944] CPU: 7 UID: 1000 PID: 9925 Comm: vkd3d_queue Kdump: loaded Not tainted 7.0.0-070000rc3-generic #202603090038 PREEMPT(lazy) [ 413.361949] RIP: 0010:vm_bind_ioctl_ops_unwind+0x1e2/0x2e0 [xe] [ 413.362074] RSP: 0018:ffffd4c25c3df930 EFLAGS: 00010282 [ 413.362077] RAX: 0000000000000000 RBX: ffff8f3ee817ed10 RCX: 0000000000000000 [ 413.362078] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 413.362079] RBP: ffffd4c25c3df980 R08: 0000000000000000 R09: 0000000000000000 [ 413.362081] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8f41fbf99380 [ 413.362082] R13: ffff8f3ee817e968 R14: 00000000ffffffef R15: ffff8f43d00bd380 [ 413.362083] FS: 00000001040ff6c0(0000) GS:ffff8f4696d89000(0000) knlGS:00000000330b0000 [ 413.362085] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 413.362086] CR2: 00007ddfc4747000 CR3: 00000002e6262005 CR4: 0000000000f72ef0 [ 413.362088] PKRU: 55555554 [ 413.362089] Call Trace: [ 413.362092] <TASK> [ 413.362096] xe_vm_bind_ioctl+0xa9a/0xc60 [xe] Which seems to hint that the vma we are re-inserting for the ops unwind is either invalid or overlapping with something already inserted in the vm. It shouldn't be invalid since this is a re-insertion, so must have worked before. Leaving the likely culprit as something already placed where we want to insert the vma. Following from that, for the case where we do something like a rebind in the middle of a vma, and one or both mapped ends are already compatible, we skip doing the rebind of those vma and set next/prev to NULL. As well as then adjust the original unmap va range, to avoid unmapping the ends. However, if we trigger the unwind path, we end up with three va, with the two ends never being removed and the original va range in the middle still being the shrunken size. If this occurs, one failure mode is when another unwind op needs to interact with that range, which can happen with a vector of binds. For example, if we need to re-insert something in place of the original va. In this case the va is still the shrunken version, so when removing it and then doing a re-insert it can overlap with the ends, which were never removed, triggering a warning like above, plus leaving the vm in a bad state. With that, we need two things here: 1) Stop nuking the prev/next tracking for the skip cases. Instead relying on checking for skip prev/next, where needed. That way on the unwind path, we now correctly remove both ends. 2) Undo the unmap va shrinkage, on the unwind path. With the two ends now removed the unmap va should expand back to the original size again, before re-insertion. v2: - Update the explanation in the commit message, based on an actual IGT of triggering this issue, rather than conjecture. - Also undo the unmap shrinkage, for the skip case. With the two ends now removed, the original unmap va range should expand back to the original range. v3: - Track the old start/range separately. vma_size/start() uses the va info directly. (cherry picked from commit aec6969f75afbf4e01fd5fb5850ed3e9c27043ac)

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-23457

netfilter: nf_conntrack_sip: fix Content-Length u32 truncation in sip_help_tcp()

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: fix Content-Length u32 truncation in sip_help_tcp() sip_help_tcp() parses the SIP Content-Length header with simple_strtoul(), which returns unsigned long, but stores the result in unsigned int clen. On 64-bit systems, values exceeding UINT_MAX are silently truncated before computing the SIP message boundary. For example, Content-Length 4294967328 (2^32 + 32) is truncated to 32, causing the parser to miscalculate where the current message ends. The loop then treats trailing data in the TCP segment as a second SIP message and processes it through the SDP parser. Fix this by changing clen to unsigned long to match the return type of simple_strtoul(), and reject Content-Length values that exceed the remaining TCP payload length.

CVSS 3.1 · 8.6 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-23437

net: shaper: protect late read accesses to the hierarchy

In the Linux kernel, the following vulnerability has been resolved: net: shaper: protect late read accesses to the hierarchy We look up a netdev during prep of Netlink ops (pre- callbacks) and take a ref to it. Then later in the body of the callback we take its lock or RCU which are the actual protections. This is not proper, a conversion from a ref to a locked netdev must include a liveness check (a check if the netdev hasn't been unregistered already). Fix the read cases (those under RCU). Writes needs a separate change to protect from creating the hierarchy after flush has already run.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-23136

libceph: reset sparse-read state in osd_fault()

In the Linux kernel, the following vulnerability has been resolved: libceph: reset sparse-read state in osd_fault() When a fault occurs, the connection is abandoned, reestablished, and any pending operations are retried. The OSD client tracks the progress of a sparse-read reply using a separate state machine, largely independent of the messenger's state. If a connection is lost mid-payload or the sparse-read state machine returns an error, the sparse-read state is not reset. The OSD client will then interpret the beginning of a new reply as the continuation of the old one. If this makes the sparse-read machinery enter a failure state, it may never recover, producing loops like: libceph: [0] got 0 extents libceph: data len 142248331 != extent len 0 libceph: osd0 (1)...:6801 socket error on read libceph: data len 142248331 != extent len 0 libceph: osd0 (1)...:6801 socket error on read Therefore, reset the sparse-read state in osd_fault(), ensuring retries start from a clean state.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-23103

ipvlan: Make the addrs_lock be per port

In the Linux kernel, the following vulnerability has been resolved: ipvlan: Make the addrs_lock be per port Make the addrs_lock be per port, not per ipvlan dev. Initial code seems to be written in the assumption, that any address change must occur under RTNL. But it is not so for the case of IPv6. So 1) Introduce per-port addrs_lock. 2) It was needed to fix places where it was forgotten to take lock (ipvlan_open/ipvlan_close) This appears to be a very minor problem though. Since it's highly unlikely that ipvlan_add_addr() will be called on 2 CPU simultaneously. But nevertheless, this could cause: 1) False-negative of ipvlan_addr_busy(): one interface iterated through all port->ipvlans + ipvlan->addrs under some ipvlan spinlock, and another added IP under its own lock. Though this is only possible for IPv6, since looks like only ipvlan_addr6_event() can be called without rtnl_lock. 2) Race since ipvlan_ht_addr_add(port) is called under different ipvlan->addrs_lock locks This should not affect performance, since add/remove IP is a rare situation and spinlock is not taken on fast paths.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-23066

rxrpc: Fix recvmsg() unconditional requeue

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix recvmsg() unconditional requeue If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call at the front of the recvmsg queue already has its mutex locked, it requeues the call - whether or not the call is already queued. The call may be on the queue because MSG_PEEK was also passed and so the call was not dequeued or because the I/O thread requeued it. The unconditional requeue may then corrupt the recvmsg queue, leading to things like UAFs or refcount underruns. Fix this by only requeuing the call if it isn't already on the queue - and moving it to the front if it is already queued. If we don't queue it, we have to put the ref we obtained by dequeuing it. Also, MSG_PEEK doesn't dequeue the call so shouldn't call rxrpc_notify_socket() for the call if we didn't use up all the data on the queue, so fix that also.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-22990

libceph: replace overzealous BUG_ON in osdmap_apply_incremental()

In the Linux kernel, the following vulnerability has been resolved: libceph: replace overzealous BUG_ON in osdmap_apply_incremental() If the osdmap is (maliciously) corrupted such that the incremental osdmap epoch is different from what is expected, there is no need to BUG. Instead, just declare the incremental osdmap to be invalid.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel