Apache Kylin: JobController allows unauthorized cross-project manipulation

Exposure of unauthorized cross-project job manipulation vulnerability in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted. This issue affects Apache Kylin: from 4 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue.

ovpn: replace bind when clearing stale local source

In the Linux kernel, the following vulnerability has been resolved: ovpn: replace bind when clearing stale local source The UDP output fallback clears bind->local in place when the remembered source address is no longer usable. The bind is RCU-published and read locklessly by concurrent TX, so an IPv6 reader can observe a torn address. Retry the route lookup with source address autoselection without modifying the bind. After a successful lookup, revalidate the bind and route key under peer->lock, reset the dst cache, and best-effort publish a replacement bind with a wildcard local address. Do not cache the resolved dst when clearing the local source. Replacing the source invalidates all per-CPU cache entries, while dst_cache_set_ip4 and dst_cache_set_ip6 update only the current CPU slot. The current packet can still use the resolved route; if bind allocation fails, a later cache miss retries the repair.

ColdFusion | Improper Input Validation (CWE-20)

ColdFusion is affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. An attacker with high privileges could exploit this vulnerability to execute arbitrary code. The vulnerable component is restricted to an administrative network zone by default. Exploitation of this issue does not require user interaction. Scope is changed.

Apache Kylin: Unauthorized SQL execution to Spark SQL env

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Kylin. This issue affects Apache Kylin: from 4 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue.

Apache Kylin: Unauthorized cross-project job discard

Exposure of Job Discard to an Unauthorized Actor vulnerability in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted. This issue affects Apache Kylin: from 4 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue.

SolarWinds Patch Manager Sensitive Information Exposure Vulnerability

SolarWinds Patch Manager exposes sensitive information accessible to local users, which could be used to gain elevated privileges.

Authenticated Path Traversal Vulnerability Enabling Arbitrary File Read on Advantech ADAM-3600

A path traversal vulnerability could allow an authenticated attacker to read arbitrary files on the system.

Heap Memory Read Allows Sensitive Data Exfiltration in Advantech ADAM-3600

A heap memory read vulnerability could allow an attacker to exfiltrate sensitive data.

Grav 2.0.0 before 2.2.2 Information Disclosure via Form config-*@ Directives

Grav from 2.0.0 before 2.2.2 contains an information disclosure vulnerability that allows page editors to read protected configuration by adding config-*@ directives to page frontmatter forms. Attackers with page-edit permission can bypass the Twig sandbox config_denied_paths redaction to expose security.salt, plugin credentials, and Redis passwords to all visitors.

Craft CMS before 4.18.8 and 5.11.0 Twig Sandbox Allowlist Bypass via Array Filters

Craft CMS 4.0.0 before 4.18.8 and 5.0.0 before 5.11.0 contains a Twig sandbox allowlist bypass because the column, contains, filterByValue, index, where, and multisort filters resolve caller-supplied keys via ArrayHelper::getValue() without consulting the sandbox security policy. Authenticated Control Panel users can supply dot-path keys to traverse the craft global and disclose the securityKey, database credentials, and auth tokens.

0xJacky/nginx-ui /api/nodes Leaks Cluster Node Tokens and Allows Cross-Node Impersonation as initUser

Nginx UI is a web user interface for the Nginx web server. From 2.0.0 until 2.5.0, ordinary authenticated users can access /api/nodes and /api/nodes/:id, whose responses serialize the node token field. The same token is accepted as X-Node-Secret by AuthRequired and maps the request to initUser, allowing the user to impersonate a trusted node against a reachable cluster member. This cross-node authentication bypass can expose sensitive management operations, including configuration synchronization and service restart. This issue is fixed in version 2.5.0.

NFSv4/flexfiles: reject zero filehandle version count

In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: reject zero filehandle version count ff_layout_alloc_lseg() decodes the filehandle-version array count from the flexfiles layout body. The value is used as the count for kzalloc_objs(), and the current code only rejects NULL. A zero count yields ZERO_SIZE_PTR, which can be stored in dss_info->fh_versions even though later flexfiles paths assume that at least one filehandle version exists. Reject fh_count == 0 before the allocation, matching the existing zero version_count validation in the flexfiles GETDEVICEINFO parser. A QEMU/KASAN run with a malformed flexfiles layout hit: KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:ff_layout_encode_ff_layoutupdate.isra.0+0x15f/0x750 ff_layout_encode_layoutreturn+0x683/0x970 nfs4_xdr_enc_layoutreturn+0x278/0x3a0 Kernel panic - not syncing: Fatal exception The patched kernel rejects the malformed layout without KASAN/oops/panic, and a valid fh_count=1 regression still opens, reads, and unmounts cleanly.

RabbitMQ: Non-RFC-conformant cookie name when clearing the auth-mechanism preference

RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.8 and 4.3.2, get_auth_mechanism/1 used term_to_binary/1 on the strict_auth_mechanism or preferred_auth_mechanism atom when clearing the corresponding cookie, producing a non-ASCII cookie name that violates RFC 6265 and can prevent the browser from deleting the preference. The issue is not directly exploitable for code execution or data exfiltration; its security relevance is limited to stale authentication-mechanism preferences persisting across logout and login cycles. This issue is fixed in versions 4.2.8 and 4.3.2.

net: arp: terminate device name before lookup

In the Linux kernel, the following vulnerability has been resolved: net: arp: terminate device name before lookup The ARP ioctl copies a user-provided struct arpreq into a stack object. Its arp_dev field may contain IFNAMSIZ bytes without a NUL terminator. Such input is passed to dev_get_by_name_rcu() or __dev_get_by_name(), where strcmp() can read past the end of the stack object when a matching alternative interface name exists. Terminate the field before the lookup to prevent the out-of-bounds read.

A denial-of-service issue was addressed with improved input validation. This issue is fixed in iOS 27 and iPadOS 27. A remote attacker may be able to cause a denial-of-service.

WordPress Traveler Option Tree plugin <= 2.8 - Sensitive Data Exposure vulnerability

Insertion of Sensitive Information Into Sent Data vulnerability in Shinetheme Traveler Option Tree custom-option-tree allows Retrieve Embedded Sensitive Data.This issue affects Traveler Option Tree: from n/a through 2.8.

Gitea private profile information disclosure through POST request

The visibility check of Gitea user profiles was applied to GET requests only, while `POST /{username}` (follow and unfollow) required only a signed-in user. Any authenticated user could therefore obtain the full name, location, website and description of a user with a private profile from the response. The issue was fixed in 28.1.0 and disclosed with 28.2.0.

s390/cmf: Fix virtual vs physical address confusion

In the Linux kernel, the following vulnerability has been resolved: s390/cmf: Fix virtual vs physical address confusion The measurement block address is an absolute address. Define the associated schib_config and schib fields as dma64_t to enable automatic detection of incorrect assignments. Also add the missing virt_to_dma64() translation. Without this fix, a wrong address will be used by firmware when storing extended format channel measurement data on kernels built with CONFIG_RANDOMIZE_IDENTITY_BASE=y.

nfc: nfcmrvl: validate helper command length before pull

In the Linux kernel, the following vulnerability has been resolved: nfc: nfcmrvl: validate helper command length before pull The firmware download receive path removes the NCI data header and reads the helper command before validating the remaining packet length. A short frame can therefore reach the data access before the malformed packet is rejected. Validate the complete helper command length before stripping the NCI data header.

Online Scheduling and Appointment Booking System <= 28.4 - Unauthenticated Sensitive Information Exposure in 'phone' Parameter to bookly_render_details

The Bookly – Online Scheduling and Appointment Booking System plugin for WordPress is vulnerable to Sensitive Information Exposure in versions up to, and including, 28.4 via the classic booking form's Details step. The endpoint bookly_render_details is registered for both wp_ajax and wp_ajax_nopriv, the module overrides csrfTokenValid() to always return true, and Bookly\Frontend\Components\Booking\InfoText::getCodes() calls UserBookingData::getCustomer() to load the persisted Customer entity keyed solely by the attacker-supplied phone (or email) with no invocation of the plugin's own customerIdentityConfirmed() predicate. When a site owner has placed the supported {client_name}, {client_email}, {client_phone}, or {client_note} placeholders into the Details step's Appearance information text, the matched customer's stored name, email, phone and internal notes are substituted into the returned HTML. This makes it possible for unauthenticated attackers who know only a registered customer's primary phone (or email) to read that customer's stored personal data.