Arbitrary OS Command Execution via Crafted Parameters in ASUS Routers

Improper Neutralization of Special Elements used in an OS Command in certain ASUS routers allows remote user to execute arbitrary commands with root privileges via crafted parameters sent to the router while the device is in its factory-default state.Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.

Wildfly: wildfly-iiop: wildfly-jacorb: wildfly: pre-auth denial of service on the iiop listener

A flaw was found in Wildfly. A remote unauthenticated attacker can trigger OutOfMemoryError as CSIv2Util's GSS token decoder reads an attacker-controlled length field without bounds checking and attempts to allocate a byte array of that size.

spi: imx: fix slab corruption from undersized DMA bounce buffers

In the Linux kernel, the following vulnerability has been resolved: spi: imx: fix slab corruption from undersized DMA bounce buffers Since commit faa8e404ad8e ("spi: imx: support dynamic burst length for ECSPI DMA mode"), the driver allocates its private DMA TX/RX buffers with kzalloc(dma_len), where dma_len is only rounded up to 4 bytes, but maps, syncs and unmaps them with DMA_CACHE_ALIGNED_LEN(dma_len), i.e. rounded up to the cache line size. As a result, the DMA API operates on memory beyond the end of the allocation. This was observed on a custom i.MX8MP platform with an mcp251xfd CAN controller under heavy RPMSG load, as a series of refcount_t warnings triggered from rpmsg_recv_done() in virtio_rpmsg_bus: refcount_t: addition on 0; use-after-free. refcount_t: underflow; use-after-free. refcount_t: saturated; leaking memory. Leading finally to an "Unable to handle kernel paging request" oops. Reproducing this problem took between 30 minutes and roughly 30 hours under the same workload. Hardware watchpoints on the refcount of a struct rpmsg_endpoint showed it was overwritten from 2 to 1 by __pi_memcpy_generic() in the irq/155-spi2.0 thread. Additionally it was found that a "normal" rpmsg_recv_done() took 11µs +/-2µs from its kref_get to kref_put. In the error case the same sequence took about 215µs +/-10µs. Based on this, an LLM was used to identify the size mismatch fixed here. Allocate the buffers with DMA_CACHE_ALIGNED_LEN(dma_len) so they cover the full mapped length, and use the same length for dma_sync_single_for_cpu() to stay consistent with map and unmap. With this patch applied, the same workload ran for more than 200 hours without the problem reproducing.

OS Command Injection in Dell OpenManage Enterprise Prior to 4.8.0

Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution.

tracing: Keep the predicate limit separate from program capacity

In the Linux kernel, the following vulnerability has been resolved: tracing: Keep the predicate limit separate from program capacity predicate_parse() adds two to nr_preds to reserve the terminal TRUE and FALSE entries. It also uses that increased value as the limit for parsed predicates. If the initial count is smaller than the number actually parsed, the program can fill the allocation and subsequent accesses can go past its end. Keep nr_preds as the predicate limit and use a separate value for the allocation size. This leaves space for both terminal entries and a zeroed entry when parsing stops at the limit.

smb: client: fix heap overflow in cifs_do_set_acl()

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in cifs_do_set_acl() cifs_set_acl() validates ACL size using posix_acl_xattr_size(): 4 + (count * 8) // 4-byte header + 8 bytes per ACE cifs_do_set_acl() then calls posix_acl_to_cifs() to write the CIFS wire format into the same buffer: 6 + (count * 10) // 6-byte header + 10 bytes per ACE An ACL that passes the xattr-based check in cifs_set_acl() can overflow the heap when posix_acl_to_cifs() writes the larger CIFS format. Validate the CIFS format size against the remaining buffer space and USHRT_MAX before converting--data_count is __u16, so sizes above USHRT_MAX truncate the on-wire packet length, causing the server to apply a partial ACL. Replace MaxDataCount = 1000 with min(CIFSMaxBufSize, USHRT_MAX).

tracing: Check operator stack capacity before pushing

In the Linux kernel, the following vulnerability has been resolved: tracing: Check operator stack capacity before pushing predicate_parse() uses the first operator stack entry before processing any opening parentheses. A push then increments top before writing. The existing check still permits that write when top already points to the last allocated entry, which can access beyond the operator stack. Reject the push when top reaches the last allocated entry.

ntfs: fix incorrect MFT record pointer passed to ntfs_attr_record_resize

In the Linux kernel, the following vulnerability has been resolved: ntfs: fix incorrect MFT record pointer passed to ntfs_attr_record_resize ntfs_new_attr_flags() passes the wrong MFT record to ntfs_attr_record_resize(). When the attribute is in an extent record, ctx->mrec points to the extent but the function receives the base record pointer m, causing incorrect size calculations in memmove. Fix by passing ctx->mrec (the actual MFT record containing the attribute) instead of m (the base MFT record) to ntfs_attr_record_resize().

OPNsense before 26.7.8 Root Command Injection via Firmware Mirror Setting

OPNsense before 26.7.8 contains a command injection vulnerability that allows authenticated users with the System: Firmware privilege to execute commands as root by storing a malicious firmware mirror URL. Attackers can submit shell metacharacters through POST /api/core/firmware/set that opnsense-update evaluates with eval, and can also disable package signature verification through sed injection.

DevilutionX 1.4.0 through 1.5.5 Heap Buffer Overflow via libmpq__archive_dup

DevilutionX 1.4.0 through 1.5.5 contains a heap buffer overflow vulnerability in the bundled libmpq libmpq__archive_dup routine when opening crafted MPQ archives. Attackers can supply an MPQ archive whose block table count exceeds its hash table count, causing memcpy to overflow the heap during startup and crash the game.

FLTK through 1.4.5 Heap Buffer Overflow via Fl_BMP_Image Integer Overflow

FLTK through 1.4.5 contains an integer overflow vulnerability in Fl_BMP_Image::load_bmp_() that causes undersized pixel buffer allocation from file-supplied width and height. Attackers can supply a crafted BMP or ICO file with large dimensions so row decoding writes file-derived data past the heap buffer, corrupting the application heap.

Sunwood-ai-labs github-kanban-mcp-server issue-handlers.ts handleListIssues os command injection

A vulnerability was identified in Sunwood-ai-labs github-kanban-mcp-server up to 0.4.0. Impacted is the function handleListIssues of the file src/handlers/issue-handlers.ts. Such manipulation of the argument state/labels leads to os command injection. The attack can be launched remotely. Upgrading to version 0.4.1 is recommended to address this issue. The name of the patch is 253d93bbdf7ee9fe42bd8fdf15feea93ae59cbae. It is suggested to upgrade the affected component.

Dolibarr ERP CRM before 24.0.0 OS Command Injection via mysqldump Parameter

Dolibarr ERP CRM before 24.0.0 contains an OS command injection vulnerability in htdocs/admin/tools/export.php that lets authenticated administrators bypass the restrict_os_commands allowlist. Attackers can submit a mysqldump value chaining commands with & characters around an allowlisted basename to execute operating system commands as the web server user.

Crass: Large numeric exponents cause CPU and memory denial of service

Crass is a Ruby CSS parser that's fully compliant with the CSS Syntax Level 3 specification. Prior to 1.0.7, Crass converts `CSS scientific notation` number values with unbounded exponentiation before clamping the result to `Float::MAX`. Applications that use Crass to parse attacker-controlled CSS strings can be forced to spend disproportionate CPU and memory parsing a tiny input, potentially resulting in a crash. This issue is fixed in version 1.0.7.

Yamaha wireless LAN router NWR100 provided by Yamaha Corporation contains an OS command injection vulnerability. Arbitrary OS commands may be executed by sending a specially crafted request to the affected product.

Paperclip 2026.403.0 before 2026.416.0 RCE via Execution Workspace Cleanup Commands

Paperclip 2026.403.0 before 2026.416.0 contains a remote code execution vulnerability that allows agent API key holders to set cleanupCommand and teardownCommand via PATCH /api/execution-workspaces/:id. When the workspace is archived, cleanupExecutionWorkspaceArtifacts runs these commands through a shell as the Paperclip server process, executing attacker-chosen OS commands on the server host.

Dahua Intelligent Connection Center command injection

A vulnerability has been found in the Dahua Intelligent Connection Center. A remote attacker could send a specially crafted request to the affected system, allowing the attacker to execute arbitrary commands, resulting in remote code execution.

CallBackery versions before 0.62.0 for Perl allow OS command execution via sqlite3 shell commands in a restored configuration backup

CallBackery versions before 0.62.0 for Perl allow OS command execution via sqlite3 shell commands in a restored configuration backup. restoreConfigBlob() feeds the database dump in a backup to the sqlite3 command-line shell. The shell runs lines starting with a dot as its own commands, so .shell or .system in the dump runs an OS command and .load loads native code. Anyone who can supply a backup to be restored can run arbitrary commands as the application user.

libass: Out-of-bounds read and write in wrap_lines_measure

libass is a portable subtitle renderer for the `ASS`/SSA (Advanced Substation Alpha/Substation Alpha) subtitle format. Prior to 0.17.5, libass can overread and overwrite the glyph array in `wrap_lines_measure` while rendering malicious `ASS` content. In `wrap modes other than two`, a final line ending with a literal backslash-n sequence and otherwise consisting only of such sequences or spaces can remain after early trimming and make the line-measurement loops overshoot by one glyph. When the total text size exactly matches the allocated glyph-array capacity, the first loop reads an uninitialized 32-bit fixed-point `pos.x` value, although that value is not subsequently used. The second loop writes `pos.x` and `pos.y` beyond the array, zeroing the first and adding an attacker-controllable offset to the second. No actual exploitation beyond possible denial of service is known; broader exploitation is theoretical and constrained by the addresses, limited writes, and ASLR. This issue is fixed in version 0.17.5.

Zuke: Argument injection on Windows: batch shims are launched through cmd.exe, which re-parses the command line

Zuke is a code-first, strongly typed build automation system for Deno. Prior to 1.51.0, @zuke/core launches resolved Windows .cmd and .bat shims by prepending cmd /c, causing cmd.exe to reparse a command line assembled with C-runtime quoting rules. A build running on Windows that resolves a tool from node_modules/.bin and passes attacker-influenced text containing an unquoted &, |, or ^ metacharacter can execute an additional attacker-chosen command in the build's context with access to its credentials. POSIX platforms are not affected. This issue is fixed in version 1.51.0.