Out-of-bounds write in the Bluetooth GATT client: oversized notification and indication values delivered to subscribers

The Bluetooth host's GATT client passed the value of a received Handle Value Notification, Handle Value Indication or Multiple Handle Value Notification to bt_gatt_subscribe_params::notify callbacks using only the length derived from the received ATT PDU. bt_att_recv() in subsys/bluetooth/host/att.c validates only a minimum PDU length and does not enforce the negotiated ATT MTU, and the fixed ATT L2CAP channel in subsys/bluetooth/host/l2cap.c applies no rx.mtu check either, so the only ceiling was the ACL reassembly buffer CONFIG_BT_BUF_ACL_RX_SIZE. Values longer than the 512-octet maximum attribute length defined by the Bluetooth Core Specification (Vol 3, Part F, Section 3.2.9) could therefore be handed to subscribers that size their buffers to that documented limit. A remote peer that a device has connected and subscribed to — a malicious, spoofed or compromised GATT server within radio range — triggers the flaw by sending a notification or indication whose value exceeds 512 octets on a subscribed handle. In the LE Audio unicast client this reaches a concrete out-of-bounds write: unicast_client_ep_notify() in subsys/bluetooth/audio/bap_unicast_client.c copies the notification into the 512-byte att_buf of struct unicast_client with net_buf_simple_add_mem() and no tailroom check whenever length equals bt_audio_get_max_ntf_size(), i.e. the negotiated ATT MTU minus three. notify_handler() in subsys/bluetooth/audio/bap_broadcast_assistant.c has the same shape. Reaching the overflow requires a build whose ATT MTU exceeds 515 octets (CONFIG_BT_L2CAP_TX_MTU and CONFIG_BT_BUF_ACL_RX_SIZE set for full-length attribute support); the shipped defaults are far smaller. The overflow writes peer-controlled bytes past att_buf directly over the adjacent struct net_buf_simple net_buf — its data, __buf, len and size fields — which the subsequent long-read accumulation then uses as its destination, turning a small linear overflow into a controlled write. net_buf_simple_add() only asserts on insufficient tailroom unless CONFIG_NET_BUF_HARDENING is enabled, and that option is disabled by default, so ordinary production builds perform the copy. Beyond the in-tree LE Audio clients, any application subscriber that sized its receive buffer to the specification's 512-octet limit was exposed to the same overflow. The fix rejects notification, indication and multiple-notification values longer than BT_ATT_MAX_ATTRIBUTE_LEN in call_notify_cb_and_maybe_unsubscribe() in subsys/bluetooth/host/gatt.c before any subscriber callback is invoked, so no subscriber can be handed more than the specified maximum. Remaining tuples of a multiple handle value notification are still delivered and oversized indications are still confirmed.

This issue was addressed by removing the vulnerable code. This issue is fixed in iOS 27.2 and iPadOS 27.2, tvOS 27.2. An attacker on the local network may be able to cause unexpected system termination or corrupt process memory.

nnn through 5.3 OS Command Injection via togglex Plugin

Jarun nnn through 5.3 contains an OS command injection vulnerability in plugins/togglex that allows attackers to execute commands via crafted filenames. Attackers can place files whose names contain a double quote and shell syntax, which xargs -I splices into an sh -c script, running commands as the user invoking togglex.

AzuraCast through 0.23.8 Command Injection via StereoTool Liquidsoap pipe()

AzuraCast through 0.23.8 contains a command injection vulnerability that allows station users with Profile permission to execute OS commands via StereoTool settings. Attackers can inject shell metacharacters into stereo_tool_configuration_path or stereo_tool_license_key, which are executed via /bin/sh on station restart, compromising the container.

Nx: OS command injection via nx.json plugin options in @nx/maven and @nx/gradle

Nx is a monorepo solution for TypeScript and polyglot codebases. From 22.0.2 until 22.7.9 and 23.1.2 for @nx/maven, and from 21.0.0 until 22.7.9 and 23.1.2 for @nx/gradle, the plugins' project-graph analyzers launch through a shell and interpolate plugin options from nx.json into command arguments. The @nx/maven targetNamePrefix value and arbitrary @nx/gradle option names or values can therefore be interpreted as shell syntax whenever an nx command constructs the project graph. A user who runs Nx in an attacker-controlled repository or pull request can execute injected commands with the user's privileges, while workspaces that register neither affected plugin are not exposed to this path. Remediation requires upgrading both nx and each affected plugin to matching releases because the plugin fix depends on code in the nx package. This issue is fixed in versions 22.7.9 and 23.1.2.

KeePassXC: Out-of-bounds write in browser integration response encryption with oversized database responses

KeePassXC is a cross-platform community-driven port of the Windows application KeePass Password Safe. From 2.3.0 until 2.8.0, KeePassXC browser integration encrypts authorized responses in src/browser/BrowserMessageBuilder.cpp using a fixed 1 MiB output vector even though Botan::Sodium::crypto_box_easy() writes the plaintext length plus crypto_box_MACBYTES. A browser-protocol client that can access the per-user IPC endpoint, has a valid database association, and causes an unlocked database to generate and encrypt a sufficiently large authorized response can trigger a sequential out-of-bounds write before any response is delivered. This issue is fixed in version 2.8.0.

Out-of-bounds Write in NTPsec

An out-of-bounds read and write in NTS client extension field parsing (extens_client_recv) in NTPsec before 1.2.5 allows a remote attacker who can send NTP server-mode replies to an NTS client to corrupt heap memory and crash ntpd, and, combined with the NTS-KE client out-of-bounds read fixed in 1.2.4, to bypass NTS authentication and set the client's time, via an NTS Authenticator and Encrypted Extension Fields field whose nonce length exceeds the field.

Control Web Panel (CWP) < 1.29 OS Command Injection via restoredatabase API

Control Web Panel (CWP) before webpanel_version 1.29 contains an OS command injection vulnerability in the loopback API database restore route /v1/restoredatabase/, where the restoreDBBackup() handler passes an attacker-controlled file path from the POST body into a shell command without proper escaping. An attacker able to reach the route can inject arbitrary OS commands that execute as root.

HTTP::Server::PSGI versions before 1.0056 for Perl allow a single request to crash the server by declaring a large Content-Length

HTTP::Server::PSGI versions before 1.0056 for Perl allow a single request to crash the server by declaring a large Content-Length. The request body is read with sysread() calls sized by the remaining Content-Length. Perl grows the read buffer to the requested length before any data arrives, so the server tries to allocate as much memory as the client declares. A remote attacker can send one request with a large Content-Length and a few body bytes, and perl exits with an out-of-memory error before the application is called. HTTP::Server::PSGI runs as a single process, so the server stays down until restarted.

Buffer Overflow in CoE SDO Upload Multi-Segment Data Transfers

SOEM version 2.0.0 and earlier contains a vulnerability in multi-segment data transfers where a malicious device can overflow memory buffers. The software checks the total size only once at the beginning, but doesn't track the cumulative size as multiple segments arrive. An attacker can declare a small initial size to pass validation, then send additional segments that exceed the allocated buffer. This allows the attacker to write controlled data beyond buffer boundaries, potentially enabling code execution.

Memory Corruption via FMMU Configuration Table Overflow

SOEM version 2.0.0 and earlier contains a vulnerability during device configuration where a malicious device can cause memory corruption. The software writes configuration data to a fixed-size array without checking if the array index exceeds its maximum size of EC_MAXFMMU entries. A device presenting more than EC_MAXFMMU configuration blocks can force writes beyond the array boundary, corrupting adjacent memory structures and potentially disrupting subsequent operations.

Multiple Out-of-Bounds Reads in Frame Processing

SOEM version 2.0.0 and earlier contains multiple vulnerabilities in frame processing where a malicious device can cause the master to read data outside allocated buffers. The software uses length and offset values from device messages without validating them against buffer sizes. This can cause the master to access invalid memory locations, potentially disclosing sensitive information or causing crashes.

Out-of-bounds Write in µD3TN

Remote Unauthenticated Heap Out-of-Bounds Write in µD3TN BPv6 Administrative Record Parser allows Unauthenticated Remote Attacker to Reliably Cause DoS

Out-of-bounds Write in µD3TN

Off-by-one Heap Overflow in µD3TN v0.15.1 SPP Parser allows Unauthenticated Remote Attacker to Reliably Cause DoS

imagecodecs 2023.1.23 through 2026.10.10 Stack Buffer Overflow via jpegsof3_decode()

imagecodecs 2023.1.23 through 2026.10.10 contains a stack-based buffer overflow vulnerability in the lossless JPEG Define Huffman Table parser in decode_jpegsof3(). Attackers can supply a crafted lossless JPEG whose DHT symbol counts wrap an 8-bit sum, overflowing the 32-entry HufVal and HufSz stack arrays and crashing the calling process.

Amlogic pppoe_wrapper Command Injection via AF_UNIX Socket

The pppoe_wrapper vendor daemon from the Amlogic Android SDK, as shipped on Nexbox A95X (Amlogic S905/S905X) TV boxes, contains a command injection vulnerability that allows local attackers to execute arbitrary commands as root by sending crafted messages to a world-writable AF_UNIX datagram socket at /dev/socket/pppoe_wrapper. Attackers can send a message beginning with 'pppd pty' followed by shell metacharacters and arbitrary commands, which are passed unfiltered to system(3) and executed by /system/bin/sh -c as root, resulting in full privilege escalation.

Nagios XI < 2026R2 OS Command Injection via mibs.php

Nagios XI before 2026R2 contains an OS command injection vulnerability in the MIB upload feature where the install_mib() function in mibs.php sanitizes uploaded filenames with an incomplete character-substitution filter that omits semicolons, pipes, and non-space IFS whitespace characters before passing them to a grep command run via exec(). An authenticated administrator can upload a MIB file with a crafted filename using tab characters to bypass the deny-list and pipe to sh via a multipart POST request to mibs.php, resulting in arbitrary OS command execution as the web server user.

Sunhillo SureLine OS Command Injection via networkDiag.cgi

Sunhillo SureLine before 9.1.5 contains an OS command injection vulnerability in the networkDiag.cgi endpoint that allows an authenticated remote attacker with any web account to execute arbitrary commands as root by injecting shell metacharacters into the ipAddr or dnsAddr parameters. Attackers can bypass the incomplete character denylist from the prior CVE-2021-36380 fix using URL-encoded newline (%0a) or ampersand (%26) sequences that act as command separators after decoding in the ping, nslookup, or traceroute diagnostic modes, leading to full system compromise.

Command injection vulnerability

ZohoCorp ManageEngine Key Manager Plus versions before 7151 allow authenticated users to enter malicious input when configuring a Microsoft CA

ImageMagick before 7.1.2-34 Heap Buffer Overflow via -morph Option

ImageMagick before 7.1.2-34 contains a heap-based buffer overflow in its -morph processing, where crafted images cause writes beyond the bounds of a heap buffer. An attacker can supply a crafted image that, when processed by a user with the -morph option, corrupts heap memory and crashes the application.