net: psample: fix info leak in PSAMPLE_ATTR_DATA

In the Linux kernel, the following vulnerability has been resolved: net: psample: fix info leak in PSAMPLE_ATTR_DATA psample open codes nla_put() presumably to avoid wiping the data with 0s just to override it with packet data. This open coding is missing clearing the pad, however, each netlink attr is padded to 4B and data_len may not be divisible by 4B.

audit: fix incorrect inheritable capability in CAPSET records

In the Linux kernel, the following vulnerability has been resolved: audit: fix incorrect inheritable capability in CAPSET records __audit_log_capset() records the effective capability set into the inheritable field due to a copy-paste error. Every CAPSET audit record therefore reports cap_pi (process inheritable) with the value of cap_effective instead of cap_inheritable. This silently corrupts audit data used for compliance and forensic analysis: an attacker who modifies inheritable capabilities to prepare for a privilege-escalating exec would have the change masked in the audit trail. The bug has been present since the original introduction of CAPSET audit records in 2008.

iommu/amd: Bounds-check devid in __rlookup_amd_iommu()

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Bounds-check devid in __rlookup_amd_iommu() iommu_device_register() walks every device on the PCI bus via bus_for_each_dev() and calls amd_iommu_probe_device() for each. The inlined check_device() path computes the device's sbdf, calls rlookup_amd_iommu() to find the owning IOMMU, and only afterwards verifies devid <= pci_seg->last_bdf. __rlookup_amd_iommu() indexes rlookup_table[devid] with no bounds check of its own, so for a PCI device whose BDF is not described by the IVRS, the lookup reads past the end of the allocation before the caller's bounds check can run. This was harmless before commit e874c666b15b ("iommu/amd: Change rlookup, irq_lookup, and alias to use kvalloc()"): the table was a zeroed page-order allocation, so the over-read returned NULL and the caller's NULL check skipped the device. After that commit the table is a tight kvcalloc() and the over-read returns adjacent slab contents, which check_device() then dereferences as a struct amd_iommu *, causing a boot-time GPF. Seen on Google Compute Engine ct6e VMs, where the virtualized IVRS describes only the four TPU endpoints 00:04.0-07.0; the gVNIC at 00:08.0 (devid 0x40) indexes 56 bytes past the 456-byte allocation, into the adjacent kmalloc-512 slab object: pci 0000:00:04.0: Adding to iommu group 0 pci 0000:00:05.0: Adding to iommu group 1 pci 0000:00:06.0: Adding to iommu group 2 pci 0000:00:07.0: Adding to iommu group 3 Oops: general protection fault, probably for non-canonical address 0x3a64695f78746382: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.22 #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/06/2025 RIP: 0010:amd_iommu_probe_device+0x54/0x3a0 Call Trace: __iommu_probe_device+0x107/0x520 probe_iommu_group+0x29/0x50 bus_for_each_dev+0x7e/0xe0 iommu_device_register+0xc9/0x240 iommu_go_to_state+0x9c0/0x1c60 amd_iommu_init+0x14/0x40 pci_iommu_init+0x16/0x60 do_one_initcall+0x47/0x2f0 Guard the array access in __rlookup_amd_iommu(). With the fix applied on 6.18.22, the gVNIC at 00:08.0 is skipped cleanly and the VM boots.

Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: SQR). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows low privileged attacker with logon to the infrastructure where PeopleSoft Enterprise PeopleTools executes to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 2.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:N/A:N).

Io.netty/netty-codec-http2: io.netty/netty-codec-http3: netty: http/2 and http/3 extended connect requests are downgraded as regular connect requests

A flaw was found in Netty. A remote attacker could exploit this vulnerability by sending specially crafted HTTP/2 or HTTP/3 Extended CONNECT requests. Netty's HTTP-object conversion path incorrectly processes these requests as regular HTTP/1.1 CONNECT requests, leading to a loss of critical protocol and path information. This misinterpretation can allow attackers to bypass security policies, such as routing or authorization logic, in applications that rely on Netty for HTTP/2 or HTTP/3 communication, resulting in integrity loss.

Io.netty/netty-codec-http2: http/1 authority-form connect is translated to malformed http/2 connect with host-controlled :authority

A flaw was found in Netty's HTTP/2 codec. When converting HTTP/1 CONNECT requests to HTTP/2, the component incorrectly uses the Host header instead of the CONNECT authority-form request-target for the tunnel authority. A remote attacker can exploit this by supplying a different Host header, leading to a malformed HTTP/2 CONNECT request. This can bypass security controls such as tunnel allow-lists or egress policies, resulting in integrity loss.

Gitea OAuth2 userinfo private group disclosure to public-only tokens

The OAuth2 userinfo endpoint (`/login/oauth/userinfo`) decided whether to limit the `groups` claim to public organizations by re-parsing the `Authorization` header as an OAuth2 access token instead of using the scope of the credential that authenticated the request. When a public-only OAuth2 token was sent as a query parameter or form field, or a public-only personal access token was used, that scope came back empty and the claim listed the token owner's private organizations, teams and concealed memberships. The disclosure is limited to the owner's organization and team names and memberships; no repository content is exposed. The endpoint now uses the scope of the authenticating token.

ingress-nginx mirror-target self-DOS

A security issue was discovered in ingress-nginx where a user with permission to create an Ingress may be able to cause denial of service of the ingress-nginx data plane, or possibly redirect traffic from other Ingresses. Kubernetes clusters are only affected if they are using ingress-nginx. Due to a missing check, the mirror-target Ingress annotation can be used to target an unauthenticated configuration API within the ingress-nginx controller, allowing write commands to be submitted. Corrupting the data within that configuration API results in all traffic through ingress-nginx being dropped until an Ingress configuration change or a controller restart causes the data to be recreated correctly. In principle, this write access could also be used to redirect traffic from other Ingresses controlled by the same ingress-nginx instance. In practice, there is negligible additional risk: such redirection would require privileged information about internal ingress-nginx state, and users can already redirect traffic from other Ingresses controlled by the same ingress-nginx anyway.

Apache Camel: Camel-CoAP Information Disclosure via Unmuted Consumer Exceptions

Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel CoAP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.2. When the CoAP consumer could not build its response once the route had completed, CamelCoapResource caught the resulting exception and sent its message back to the CoAP client as the payload of a 5.00 Internal Server Error response. The typical case is a type conversion failure: the consumer converts the final message body to the byte[] payload, and the CamelCoapMaxAge and CamelCoapETag headers to their types, after the route has returned, and therefore outside the route's error handler. On the affected releases the message of such a failure names the class of the value being converted, carries the value's string form, and ends with the class name and message of the underlying cause, so a remote CoAP client could read internal detail about the deployment: class and package names, the string form of the value, such as the path of a file body, and whatever the cause carries, which in practice can include paths, host names and connection detail of a backend. The consumer had no option to suppress this, unlike the HTTP consumers, which offer a muteException option for that purpose. The exception raised by a failing route was not sent: the consumer did not check whether the exchange had failed, and answered a route failure with 2.05 Content and whatever body the message held at that point. Reaching the disclosure therefore requires a route whose completed response a remote client can make unconvertible, which depends on how the route is written. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. The upgrade is enough on its own: the new muteException consumer option defaults to true on all three fixed release lines, so the error response carries no payload without any configuration change. For deployments that cannot upgrade immediately, make sure the response can always be built once the route has completed: convert the body to byte[] or String as the last step of each route that consumes from a coap endpoint, for example with convertBodyTo, give the CamelCoapMaxAge and CamelCoapETag headers only values of their own types, and add an onException handler that marks the failure as handled and sets the response body explicitly, so that a conversion failure is raised and replaced inside the route rather than in the consumer.

In multiple functions of DevicePolicyManagerService.java, there is a possible desync from persistence due to improper input validation. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.

Desynchronization in Android DevicePolicyManagerService Enables Local Privilege Escalation

In setGlobalProxy of DevicePolicyManagerService.java, there is a possible desync in persistence due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

In multiple functions of DevicePolicyManagerService.java, there is a possible way to hide a system critical package due to improper input validation. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.

In multiple functions of ubsan_throwing_runtime.cpp, there is a possible way to cause a system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.

wifi: iwlwifi: mvm: don't send a 6E related command when not supported

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't send a 6E related command when not supported MCC_ALLOWED_AP_TYPE_CMD is related to 6E support. Do not send it if the device doesn't support 6E. Apparently, the firmware is mistakenly advertising support for this command even on AX201 which does not support 6E and then the firmware crashes.

netfilter: nfnetlink_log: initialize nfgenmsg in NLMSG_DONE terminator

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: initialize nfgenmsg in NLMSG_DONE terminator When batching multiple NFLOG messages (inst->qlen > 1), __nfulnl_send() appends an NLMSG_DONE terminator with sizeof(struct nfgenmsg) payload via nlmsg_put(), but never initializes the nfgenmsg bytes. The nlmsg_put() helper only zeroes alignment padding after the payload, not the payload itself, so four bytes of stale kernel heap data are leaked to userspace in the NLMSG_DONE message body. Use nfnl_msg_put() to build the NLMSG_DONE terminator, which initializes the nfgenmsg payload via nfnl_fill_hdr(), consistent with how __build_packet_message() already constructs NFULNL_MSG_PACKET headers.

Unauthorized Database Data Access via HTTP in Oracle Database Server

Vulnerability in the RDBMS component of Oracle Database Server. Supported versions that are affected are 23.4.0-23.26.3. Easily exploitable vulnerability allows low privileged attacker having None privilege with network access via HTTP to compromise RDBMS. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all RDBMS accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N).

PayUmoney for Drupal Commerce - Critical - Unsupported - SA-CONTRIB-2026-277

Vulnerability in Drupal PayUmoney for Drupal Commerce. This issue affects PayUmoney for Drupal Commerce versions: *.*.

Commerce Core - Moderately critical - Information disclosure - SA-CONTRIB-2026-259

Exposure of Sensitive Information Through Data Queries vulnerability in Drupal Commerce Core allows Forceful Browsing. This issue affects Commerce Core versions: from 0.0.0 to 2.41.0, from 3.0.0 to 3.3.13.

Tutor LMS 1.6.4 - 4.1.3 - Subscriber+ Quiz Answer Key Disclosure

The Tutor LMS WordPress plugin before 4.2.0 does not prevent the correct answers to quiz questions from being included in the page it serves to the student taking the quiz, and does so regardless of the setting intended to control whether answers are revealed, allowing any enrolled student to obtain them before submitting their attempt.

Symfony: ScopingHttpClient Sends the Credentials of Its Default Scope to Other Origins Through Network-Path References

The component ScopingHttpClient in Symfony HttpClient merges the options of its default scope (such as auth_bearer or auth_basic) into a request before resolving a relative URL against the base_uri, allowing a network-path reference such as "//evil.example/steal" to be sent to another origin together with the default scope’s credentials, and resulting in potential disclosure of those credentials to an attacker-controlled server. This affects Symfony in versions 5.x prior to 5.4.56, 6.x prior to 6.4.50, 7.x prior to 7.4.23, and 8.x prior to 8.1.11. The resolved URL falls outside the origin of the base URI, yet it keeps the merged options, whereas the absolute spelling "https://evil.example/steal" receives none. The same happens with a different port or user-info part on the same host. This is reachable whenever an attacker controls the beginning of a URL passed to a client built with a base_uri and credentials, including those created with HttpClient::createForBaseUri() or configured under framework.http_client.scoped_clients. To solve the issue, after resolving a relative URL against the base URI of the default scope, ScopingHttpClient now compares the scheme and authority of the result with those of the base URI, parsed the way the request is sent.