Export limit exceeded: 29325 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 29,325

Export CSV
CVE-2026-85218

bluez: bluez: AVRCP ListPlayerAttributes double stack overflow in avrcp_list_player_attributes_rsp/avrcp_get_current_player_value

A double stack-based buffer overflow was found in the BlueZ AVRCP controller implementation. A nearby BR/EDR peripheral can send a crafted AVRCP player-settings response that supplies an attacker-controlled attribute count, causing avrcp_list_player_attributes_rsp() and avrcp_get_current_player_value() in profiles/audio/avrcp.c to write attacker-controlled data past fixed-size stack buffers, potentially leading to a crash or code execution in the bluetoothd daemon.

CVSS 3.1 · 7.1 High EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-85393

node-forge through 1.4.0 RSA PKCS#1 v1.5 Signature Forgery via Nested DigestAlgorithm Padding

node-forge through 1.4.0 fails to validate element count in nested DigestAlgorithm sequences during RSA PKCS#1 v1.5 signature verification. Attackers can embed garbage bytes inside the DigestAlgorithm sequence to forge valid signatures for arbitrary messages using low-exponent RSA keys. This is an incomplete fix for CVE-2026-33894.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-15431

HP Support Assistant – Potential Escalation of Privilege

A potential security vulnerability has been identified in the HP Support Assistant for versions prior to 9.53.2.0. The vulnerability could potentially allow a local attacker to escalate privileges due to insufficient access controls.

CVSS 4.0 · 7.3 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-84640

One byte overflow read in mail parser

A maliciously constructed mail header could lead to a one byte read past the end of a buffer. This vulnerability was fixed in Thunderbird 155, Thunderbird 140.15, and Thunderbird 153.2.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-84351

chromium-browser: chromium-browser: Buffer overflow in GPU

Buffer overflow in GPU in Google Chrome on on Windows prior to 152.0.7977.75 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High)

CVSS 3.1 · 8.3 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-51934

Remote Buffer Overflow in Tenda A18 Router Firmware Allows Arbitrary Code Execution

Buffer Overflow vulnerability in Shenzhen Jixiang Tengda Technology Co., Ltd. Tenda A18 v.15.13.07.09 allows a remote attacker to execute arbitrary code via the fromSetCmdlineRun function

CVSS 3.1 · 9.8 Critical EPSS 1.2% KEV · Not listed
Vendors
Products
A18
CVE-2026-12661

FactoryTalk® Historian Machine Edition - Out-of-Bounds Write Vulnerability

A denial-of-service security issue exists within FactoryTalk® Historian Machine Edition.  A network adjacent attacker who is authenticated could send crafted requests to the web interface, resulting in buffer overflow conditions that may cause the device to crash and become unresponsive.

CVE-2025-9189

Out Of Bounds Write when parsing a DSB file with Digilent DASYLab

There is an out of bounds write vulnerability due to improper bounds checking resulting in a large destination address when parsing a DSB file with Digilent DASYLab. This vulnerability may result in arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted DSB file. The vulnerability affects all versions of DASYLab.

CVSS 4.0 · 8.5 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-64087

hwmon: (pmbus/adm1266) reject implausible blackbox record_count

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/adm1266) reject implausible blackbox record_count adm1266_nvmem_read_blackbox() loops over a record_count that comes straight from byte 3 of the BLACKBOX_INFO response. The destination buffer is data->dev_mem, sized for the nvmem cell's declared 2048 bytes (ADM1266_BLACKBOX_MAX_RECORDS * ADM1266_BLACKBOX_SIZE = 32 * 64). A device that reports a record_count greater than 32 -- whether due to firmware bugs, bus corruption, or a non-responsive slave returning 0xff -- would walk read_buff past the end of the dev_mem allocation on the trailing iterations. Cap record_count at ADM1266_BLACKBOX_MAX_RECORDS (introduced here) before entering the loop and return -EIO on any larger value, so a malformed BLACKBOX_INFO response cannot drive the loop out of bounds.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64339

usb: misc: usbio: bound bulk IN response length to the received transfer

In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: bound bulk IN response length to the received transfer usbio_bulk_msg() copies bpkt_len = le16_to_cpu(bpkt->len) bytes out of the bulk IN buffer (usbio->rxbuf, allocated with size usbio->rxbuf_len) into the caller's buffer. bpkt_len is fully controlled by the device and is only checked against ibuf_len; ibuf_len in turn is checked against usbio->txbuf_len, not against rxbuf_len: if ((obuf_len > (usbio->txbuf_len - sizeof(*bpkt))) || (ibuf_len > (usbio->txbuf_len - sizeof(*bpkt)))) return -EMSGSIZE; txbuf_len and rxbuf_len are taken independently from the bulk OUT and bulk IN endpoint wMaxPacketSize in usbio_probe(). A malicious or malfunctioning device that advertises a large bulk OUT endpoint and a small bulk IN endpoint (e.g. by claiming one of the quirk-free IDs such as the Lattice NX33U, 0x2ac1:0x20cb) therefore makes ibuf_len, and hence the device-supplied bpkt_len, exceed rxbuf_len. memcpy() then reads up to txbuf_len - rxbuf_len bytes past the end of the rxbuf slab object. The over-read bytes are handed back to the i2c layer and on to user space through i2c-dev, disclosing adjacent slab memory; with KASAN this is reported as a slab-out-of-bounds read. The number of bytes actually received is already known: act equals the URB actual_length and is bounded by rxbuf_len. Reject any response that claims more payload than was received, mirroring the existing "act < sizeof(*bpkt)" check just above. The control path (usbio_ctrl_msg()) is not affected: it uses a single buffer (ctrlbuf) for both directions, so its analogous copy can never leave the allocation. Found by code review. The out-of-bounds read was confirmed under AddressSanitizer with a faithful userspace model of usbio_bulk_msg()'s receive path (an rxbuf_len-sized buffer, the same act/ibuf_len/bpkt_len checks and the memcpy). A USB raw-gadget + dummy_hcd reproducer is also available.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64318

partitions: aix: bound the pp_count scan to the ppe array

In the Linux kernel, the following vulnerability has been resolved: partitions: aix: bound the pp_count scan to the ppe array aix_partition() reads the physical volume descriptor into a fixed-size struct pvd and then scans its physical-partition-extent array: int numpps = be16_to_cpu(pvd->pp_count); ... for (i = 0; i < numpps; i += 1) { struct ppe *p = pvd->ppe + i; ... lp_ix = be16_to_cpu(p->lp_ix); pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the on-disk pp_count. pp_count is an unvalidated __be16 read straight from the descriptor, so a crafted AIX image with pp_count larger than 1016 drives the loop to read pvd->ppe[i] past the end of the allocation (up to 65535 entries, ~2 MB out of bounds). The partition scan runs without mounting anything, when a block device with a crafted AIX/IBM partition table appears (an attacker-supplied image attached with losetup -P, or a device auto-scanned by udev), via msdos_partition() -> aix_partition(). Clamp the scan to the number of entries the ppe[] array can hold.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64066

netfs: Fix netfs_read_to_pagecache() to pause on subreq failure

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_read_to_pagecache() to pause on subreq failure Fix netfs_read_to_pagecache() so that it pauses the generation of new subrequests if an already-issued subrequest fails.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-85084

Out-of-bounds write in TizenFX MediaBufferBase indexer setter due to missing bounds check

Out-of-bounds Write and Improper Validation of Array Index vulnerability in Samsung Open Source TizenFX Samsung/TizenFX allows Overflow Buffers.

CVSS 3.1 · 6.3 Medium EPSS < 1% KEV · Not listed
Products
CVE-2021-43614

VariableEditSmm: Error checking of UEFI variables could cause buffer overflow, leading to code execution

Error in handling the PlatformLangCodes UEFI variable could cause a buffer overflow, leading to resource exhaustion and failure.

CVSS 3.1 · 6.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-80253

Bootloader Execution via Physical Access in ShizenBox2

An improper physical access control issue exists in ShizenBox2 (dev-conf). If exploited, an attacker with physical access to the product may execute bootloader commands without authentication.

CVSS 4.0 · 7 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-64069

netfs: Fix cancellation of a DIO and single read subrequests

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix cancellation of a DIO and single read subrequests When the preparation of a new subrequest for a read fails, if the subrequest has already been added to the stream->subrequests list, it can't simply be put and abandoned as the collector may see it. Also, if it hasn't been queued yet, it has two outstanding refs that both need to be put. Both DIO read and single-read dispatch fail at this; further, both differ in the order they do things to the way buffered read works. Fix cancellation of both DIO-read and single-read subrequests that failed preparation by the following steps: (1) Harmonise all three reads (buffered, dio, single) to queue the subreq before prepping it. (2) Make all three call netfs_queue_read() to do the queuing. (3) Set NETFS_RREQ_ALL_QUEUED independently of the queuing as we don't know the length of the subreq at this point. (4) In all cases, set the error and NETFS_SREQ_FAILED flag on the subreq and then call netfs_read_subreq_terminated() to deal with it. This will pass responsibility off to the collector for dealing with it.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-85110

Tenda HG10 Boa Web Server formWlanSetup buffer overflow

A vulnerability was identified in Tenda HG10 300001138. Impacted is the function formWlanSetup of the file /boaform/formWlanSetup of the component Boa Web Server. The manipulation of the argument ssid leads to buffer overflow. Remote exploitation of the attack is possible. The exploit is publicly available and might be used.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-85109

Tenda HG10 Boa Web Server formLogin buffer overflow

A vulnerability was determined in Tenda HG10 300001138. This issue affects the function formLogin of the file /boaform/formLogin of the component Boa Web Server. Executing a manipulation of the argument Username can lead to buffer overflow. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized.

CVSS 4.0 · 9.3 Critical EPSS 1.1% KEV · Not listed
Vendors
Products
CVE-2026-64201

Out-of-Bounds Read Vulnerability in NI LabVIEW when loading VI

There is a memory corruption vulnerability recently discovered in NI LabVIEW that may result in information disclosure or arbitrary code execution.  Successful exploitation requires an attacker to get a user to open a specially crafted VI.  This vulnerability affects NI LabVIEW 2026 Q3 (26.3.0) and prior versions.

CVSS 4.0 · 8.5 High EPSS < 1% KEV · Not listed
Vendors
Ni
Products
CVE-2026-64202

Out-of-Bounds Read Vulnerability in NI LabVIEW when loading VI

There is a memory corruption vulnerability recently discovered in NI LabVIEW that may result in information disclosure or arbitrary code execution.  Successful exploitation requires an attacker to get a user to open a specially crafted VI.  This vulnerability affects NI LabVIEW 2026 Q3 (26.3.0) and prior versions.

CVSS 4.0 · 8.5 High EPSS < 1% KEV · Not listed
Vendors
Ni
Products