Export limit exceeded: 24537 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Use the Query Builder to create your own search query, or check out the documentation to learn the search syntax.

Results 24,537

Export CSV
CVE-2026-53137

drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size [Why & How] During HDCP 2.x repeater authentication over HDMI, the driver reads the sink's RxStatus register and extracts a 10-bit message size field (max value 1023). This value is used as the read length for the ReceiverID list without being clamped to the size of the destination buffer rx_id_list[177]. A malicious HDMI repeater could advertise a message size larger than the buffer, causing an out-of-bounds write during the I2C read. Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the rx_id_list buffer, matching the approach already used in the DP branch. (cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09)

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-53136

drm/amd/display: Clamp VBIOS HDMI retimer register count to array size

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Clamp VBIOS HDMI retimer register count to array size [Why & How] The VBIOS integrated info tables (v1_11 and v2_1) contain HdmiRegNum and Hdmi6GRegNum fields that are used as loop bounds when copying retimer I2C register settings into fixed-size arrays (dp*_ext_hdmi_reg_settings[9] and dp*_ext_hdmi_6g_reg_settings[3]). These u8 fields are not validated before use, so a malformed VBIOS can specify values up to 255, causing an out-of-bounds heap write during driver probe. Clamp each register count to the destination array size using min_t() before the copy loops, in both get_integrated_info_v11() and get_integrated_info_v2_1(). (cherry picked from commit 5a7f0ef90195940c54b0f5bb85b87da55f038c69)

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-53135

drm/amd/display: Fix NULL deref and buffer over-read in SDP debugfs

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL deref and buffer over-read in SDP debugfs [Why & How] dp_sdp_message_debugfs_write() dereferences connector->base.state->crtc without checking for NULL. A connector can be connected but not bound to any CRTC (e.g. after hot-plug before the next atomic commit), causing a kernel crash when writing to the sdp_message debugfs node. The function also ignores the user-provided size argument and always passes 36 bytes to copy_from_user(), reading past the user buffer when size < 36. Fix both issues by: - Returning -ENODEV when connector->base.state or state->crtc is NULL - Clamping write_size to min(size, sizeof(data)) (cherry picked from commit 6ab4c36a522842ff70474a1c0af2e40e50fc8300)

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-53059

dm log: fix out-of-bounds write due to region_count overflow

In the Linux kernel, the following vulnerability has been resolved: dm log: fix out-of-bounds write due to region_count overflow The local variable region_count in create_log_context() is declared as unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit). When a device-mapper target has a sufficiently large ti->len with a small region_size, the division result can exceed UINT_MAX. The truncated value is then used to calculate bitset_size, causing clean_bits, sync_bits, and recovering_bits to be allocated far smaller than needed for the actual number of regions. Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use region indices derived from the full untruncated region space, causing out-of-bounds writes to kernel heap memory allocated by vmalloc. This can be reproduced by creating a mirror target whose region_count overflows 32 bits: dmsetup create bigzero --table '0 8589934594 zero' dmsetup create mymirror --table '0 8589934594 mirror \ core 2 2 nosync 2 /dev/mapper/bigzero 0 \ /dev/mapper/bigzero 0' The status output confirms the truncation (sync_count=1 instead of 4294967297, because 0x100000001 was truncated to 1): $ dmsetup status mymirror 0 8589934594 mirror 2 254:1 254:1 1/4294967297 ... This leads to a kernel crash in core_in_sync: BUG: scheduling while atomic: (udev-worker)/9150/0x00000000 RIP: 0010:core_in_sync+0x14/0x30 [dm_log] CR2: 0000000000000008 Fixing recursive fault but reboot is needed! Fix by widening the local region_count to sector_t and adding an explicit overflow check before the value is assigned to lc->region_count.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-53004

sctp: fix OOB write to userspace in sctp_getsockopt_peer_auth_chunks

In the Linux kernel, the following vulnerability has been resolved: sctp: fix OOB write to userspace in sctp_getsockopt_peer_auth_chunks sctp_getsockopt_peer_auth_chunks() checks that the caller's optval buffer is large enough for the peer AUTH chunk list with if (len < num_chunks) return -EINVAL; but then writes num_chunks bytes to p->gauth_chunks, which lives at offset offsetof(struct sctp_authchunks, gauth_chunks) == 8 inside optval. The check is missing the sizeof(struct sctp_authchunks) = 8-byte header. When the caller supplies len == num_chunks (for any num_chunks > 0) the test passes but copy_to_user() writes sizeof(struct sctp_authchunks) = 8 bytes past the declared buffer. The sibling function sctp_getsockopt_local_auth_chunks() at the next line already has the correct check: if (len < sizeof(struct sctp_authchunks) + num_chunks) return -EINVAL; Align the peer variant with its sibling. Reproducer confirms on v7.0-13-generic: an unprivileged userspace caller that opens a loopback SCTP association with AUTH enabled, queries num_chunks with a short optval, then issues the real getsockopt with len == num_chunks and sentinel bytes painted past the buffer observes those sentinel bytes overwritten with the peer's AUTH chunk type. The bytes written are under the peer's control but land in the caller's own userspace; this is not a kernel memory corruption, but it is a kernel-side contract violation that can silently corrupt adjacent userspace data.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-52962

ceph: fix a buffer leak in __ceph_setxattr()

In the Linux kernel, the following vulnerability has been resolved: ceph: fix a buffer leak in __ceph_setxattr() The old_blob in __ceph_setxattr() can store ci->i_xattrs.prealloc_blob value during the retry. However, it is never called the ceph_buffer_put() for the old_blob object. This patch fixes the issue of the buffer leak.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-46294

dm: fix a buffer overflow in ioctl processing

In the Linux kernel, the following vulnerability has been resolved: dm: fix a buffer overflow in ioctl processing Tony Asleson (using Claude) found a buffer overflow in dm-ioctl in the function retrieve_status: 1. The code in retrieve_status checks that the output string fits into the output buffer and writes the output string there 2. Then, the code aligns the "outptr" variable to the next 8-byte boundary: outptr = align_ptr(outptr); 3. The alignment doesn't check overflow, so outptr could point past the buffer end 4. The "for" loop is iterated again, it executes: remaining = len - (outptr - outbuf); 5. If "outptr" points past "outbuf + len", the arithmetics wraps around and the variable "remaining" contains unusually high number 6. With "remaining" being high, the code writes more data past the end of the buffer Luckily, this bug has no security implications because: 1. Only root can issue device mapper ioctls 2. The commonly used libraries that communicate with device mapper (libdevmapper and devicemapper-rs) use buffer size that is aligned to 8 bytes - thus, "outptr = align_ptr(outptr)" can't overshoot the input buffer and the bug can't happen accidentally

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-46234

vsock: fix buffer size clamping order

In the Linux kernel, the following vulnerability has been resolved: vsock: fix buffer size clamping order In vsock_update_buffer_size(), the buffer size was being clamped to the maximum first, and then to the minimum. If a user sets a minimum buffer size larger than the maximum, the minimum check overrides the maximum check, inverting the constraint. This breaks the intended socket memory boundaries by allowing the vsk->buffer_size to grow beyond the configured vsk->buffer_max_size. Fix this by checking the minimum first, and then the maximum. This ensures the buffer size never exceeds the buffer_max_size.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-46191

fbcon: Avoid OOB font access if console rotation fails

In the Linux kernel, the following vulnerability has been resolved: fbcon: Avoid OOB font access if console rotation fails Clear the font buffer if the reallocation during console rotation fails in fbcon_rotate_font(). The putcs implementations for the rotated buffer will return early in this case. See [1] for an example. Currently, fbcon_rotate_font() keeps the old buffer, which is too small for the rotated font. Printing to the rotated console with a high-enough character code will overflow the font buffer. v2: - fix typos in commit message

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-46136

wifi: mt76: mt7921: fix a potential clc buffer length underflow

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix a potential clc buffer length underflow The buf_len is used to limit the iterations for retrieving the country power setting and may underflow under certain conditions due to changes in the power table in CLC. This underflow leads to an almost infinite loop or an invalid power setting resulting in driver initialization failure.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-46068

crypto: nx - fix bounce buffer leaks in nx842_crypto_{alloc,free}_ctx

In the Linux kernel, the following vulnerability has been resolved: crypto: nx - fix bounce buffer leaks in nx842_crypto_{alloc,free}_ctx The bounce buffers are allocated with __get_free_pages() using BOUNCE_BUFFER_ORDER (order 2 = 4 pages), but both the allocation error path and nx842_crypto_free_ctx() release the buffers with free_page(). Use free_pages() with the matching order instead.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-46045

md/md-llbitmap: skip reading rdevs that are not in_sync

In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: skip reading rdevs that are not in_sync When reading bitmap pages from member disks, the code iterates through all rdevs and attempts to read from the first available one. However, it only checks for raid_disk assignment and Faulty flag, missing the In_sync flag check. This can cause bitmap data to be read from spare disks that are still being rebuilt and don't have valid bitmap information yet. Reading stale or uninitialized bitmap data from such disks can lead to incorrect dirty bit tracking, potentially causing data corruption during recovery or normal operation. Add the In_sync flag check to ensure bitmap pages are only read from fully synchronized member disks that have valid bitmap data.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-45968

cpuidle: Skip governor when only one idle state is available

In the Linux kernel, the following vulnerability has been resolved: cpuidle: Skip governor when only one idle state is available On certain platforms (PowerNV systems without a power-mgt DT node), cpuidle may register only a single idle state. In cases where that single state is a polling state (state 0), the ladder governor may incorrectly treat state 1 as the first usable state and pass an out-of-bounds index. This can lead to a NULL enter callback being invoked, ultimately resulting in a system crash. [ 13.342636] cpuidle-powernv : Only Snooze is available [ 13.351854] Faulting instruction address: 0x00000000 [ 13.376489] NIP [0000000000000000] 0x0 [ 13.378351] LR [c000000001e01974] cpuidle_enter_state+0x2c4/0x668 Fix this by adding a bail-out in cpuidle_select() that returns state 0 directly when state_count <= 1, bypassing the governor and keeping the tick running.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-116241

pgAdmin 4: Import/Export Data query export runs a command through a backslash in a double-quoted identifier

pgAdmin 4's Import/Export Data tool wraps a user's query export in a psql \copy (...) TO command and checks that the query's parentheses are balanced so that nothing can escape the wrapper. The check rejected a backslash inside a single-quoted string, but not inside a double-quoted identifier, where it treated the next double quote as closing the identifier. psql's \copy parser applies the connection's escape character to whichever quote opened a token, so with standard_conforming_strings off a backslash-escaped double quote does not close the identifier. pgAdmin's and psql's view of the quoting then diverged, a closing parenthesis hidden from the check ended the \copy (...) wrapper, and a following TO PROGRAM clause was executed by psql on the pgAdmin host, as the operating-system account running pgAdmin, before the server rejected the statement. An ordinary database role can turn standard_conforming_strings off for itself, and the Import/Export Data permission is granted to non-administrators by default. This is a bypass of the fix for CVE-2026-17566. The fix rejects any backslash inside a double-quoted identifier, as was already done for single-quoted strings, since its meaning depends on a server setting that cannot be known reliably when the query is validated. This issue affects pgAdmin 4: before 9.19.

CVSS 4.0 · 9.4 Critical EPSS < 1% KEV · Not listed
Vendors
Pgadmin
Products
Pgadmin 4
CVE-2026-115865

Starlet versions before 0.33 for Perl allow a request declaring a large Content-Length to kill a worker by exhausting memory

Starlet versions before 0.33 for Perl allow a request declaring a large Content-Length to kill a worker by exhausting memory. The request body is read in a loop that asks sysread for all of the remaining declared length at once. Perl grows the read buffer to that size before any data arrives, so a length larger than available memory makes the worker exit with an uncatchable out of memory error before the application is called. A remote attacker can force a worker restart with each request of a few bytes.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Kazuho
Products
Starlet
CVE-2026-75614

ASN1SCC: Out-of-bounds write in BitStream_DecodeConstraintWholeNumber (uPER/ACN)

ASN1SCC is an open source ASN.1 compiler for embedded systems. Prior to 4.7.0.1, BitStream_DecodeConstraintWholeNumber in asn1crt/asn1crt_encoding.c reads enough bits for a constrained integer but does not reject values above the declared range when the encoded range is not a power of two. Generated uPER and ACN decoders for variable-size SEQUENCE OF, OCTET STRING, BIT STRING, and string values use the invalid result as a loop or copy length, so a crafted over-range size field can write beyond a destination buffer. Decoding untrusted affected data can corrupt heap or stack memory, cause a crash, or potentially permit code execution. This issue is fixed in version 4.7.0.1.

CVSS 3.1 · 8.1 High EPSS < 1% KEV · Not listed
Vendors
Esa
Products
Asn1scc
CVE-2026-54912

WAMR fast interpreter loader heap buffer overflow via constant deduplication mismatch

WebAssembly Micro Runtime (WAMR) is a lightweight standalone WebAssembly (Wasm) runtime. Prior to 2.4.5, the two-pass fast interpreter loader in core/iwasm/interpreter/wasm_loader.c can make inconsistent constant-table decisions between the sizing pass and the emitting pass. After duplicate constants inflate the first pass beyond the constant-slot limit, wasm_loader_get_const_offset emits later constants inline, but the between-pass sort and deduplication reduces the table so the second pass can choose table references and cause reserve_block_ret to emit additional copy operands that were not included in code_compiled_peak_size. A crafted module can therefore make the second pass write partially attacker-controlled compiled-code data beyond the heap buffer allocated from the first pass's size calculation during wasm_runtime_load, before guest code executes. This can corrupt host heap metadata and deterministically crash the process, causing denial of service; further consequences depend on the host application's heap layout. Builds using WAMR_BUILD_FAST_INTERP=1 are affected; disabling the fast interpreter avoids the vulnerable loader. This issue is fixed in version 2.4.5.

CVSS 4.0 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Bytecodealliance
Products
Wasm-micro-runtime
CVE-2026-123202

libnxml before 0.18.6 Stack-based Buffer Overflow via long multi-byte XML name

libnxml before 0.18.6 contains a stack-based buffer overflow vulnerability in src/nxml_parser.c that allows remote attackers to write past a 1024-byte stack buffer via long XML names. Attackers can supply XML or RSS feeds with a 1022-character element, attribute, DOCTYPE or entity name ending in a multi-byte UTF-8 character to crash parsing applications.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Bakulf
Products
Libnxml
CVE-2026-100407

Git for Windows: git-credential-wincred OAuth Store Heap Overflow

Git for Windows is the Windows port of Git. From 2.44.0.windows.1 until 2.55.0.windows.3, the git-credential-wincred store operation in contrib/credential/wincred/git-credential-wincred.c uses _scwprintf() to size a formatted wide-character credential buffer without space for the terminating NUL when both password and oauth_refresh_token are present. The operation also passes a byte count to _snwprintf_s() where a wide-character count is required, allowing the terminator to be written one WCHAR past the heap allocation before CredWriteW() persists the credential. The resulting fixed two-byte NUL overwrite can terminate the helper with Windows heap-corruption status and can cause git credential approve to report success even though the OAuth credential was not stored. This issue is fixed in version 2.55.0.windows.3.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Gitforwindows
Products
Git
CVE-2026-112109

Local privilege escalation in SafeNet Authentication Client SACSrv

A local privilege escalation vulnerability in Thales SafeNet Authentication Client (SAC) SACSrv can allow an authenticated, non-administrator local user to trigger a heap-based buffer overflow through the service interface. Successful exploitation may allow arbitrary code execution with Local System privileges.This issue affects SAC releases up to and including 10.9 R3 GA (build 10.9.7449).

CVSS 4.0 · 7.3 High EPSS < 1% KEV · Not listed
Vendors
Thalesgroup
Products
Safenet Authentication Client Service Safenet Authentication Service