Export limit exceeded: 55573 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 55,573

Export CSV
CVE-2026-68159

libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE

In the Linux kernel, the following vulnerability has been resolved: libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE __decode_pg_temp() decodes an user-controlled length but only rejects values large enough to overflow the allocation; it does not bound it to CEPH_PG_MAX_SIZE. The helper backs both pg_temp and pg_upmap decoding, and apply_upmap()/get_temp_osds() later copy the decoded list into the fixed-size on-stack array struct ceph_osds.osds[CEPH_PG_MAX_SIZE]. A monitor that sends an OSDMap with a pg_temp/pg_upmap entry longer than 32 thus causes a stack out-of-bounds write. An OSD set for a single PG can never exceed CEPH_PG_MAX_SIZE, so reject longer entries at decode time. The bound is well below the old overflow threshold, so it also covers the allocation-size overflow the previous check guarded against. BUG: KASAN: stack-out-of-bounds in ceph_pg_to_up_acting_osds Write of size 4 ... by task exploit kasan_report (mm/kasan/report.c:595) ceph_pg_to_up_acting_osds (net/ceph/osdmap.c:2617 net/ceph/osdmap.c:2833) calc_target (net/ceph/osd_client.c:1638) __submit_request (net/ceph/osd_client.c:2394) ceph_osdc_start_request (net/ceph/osd_client.c:2490) ceph_osdc_call (net/ceph/osd_client.c:5164) rbd_dev_image_probe (drivers/block/rbd.c:6899) do_rbd_add (drivers/block/rbd.c:7138) ... kernel BUG at net/ceph/osdmap.c:2670! [ idryomov: do the same in __decode_pg_upmap_items() ]

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68158

libceph: Fix multiplication overflow in decode_new_up_state_weight()

In the Linux kernel, the following vulnerability has been resolved: libceph: Fix multiplication overflow in decode_new_up_state_weight() If a message of type CEPH_MSG_OSD_MAP contains a (maliciously) corrupted osdmap, out-of-bounds memory accesses may occur in decode_new_up_state_weight(). This happens because the bounds check for the new_state part is based on calculating its length depending on a len value read from the incoming message. This calculation may overflow leading to an incorrect bounds check. Subsequently, out-of-bounds reads may occur when decoding this part. This patch switches the multiplication to use check_mul_overflow() to abort processing the osdmap if an overflow occurred. Therefore, osdmaps/messages containing large values for len that result in a multiplication overflow are treated as invalid. [ idryomov: rename new_state_len -> new_state_item_size, formatting ]

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68154

libceph: reject zero bucket types in crush_decode

In the Linux kernel, the following vulnerability has been resolved: libceph: reject zero bucket types in crush_decode CRUSH bucket type 0 is reserved for devices. The mapper relies on that invariant and uses type 0 to identify leaf devices. If crush_decode() accepts a bucket with type 0, a malformed CRUSH map can make the mapper treat a negative bucket ID as a device and pass it to is_out(), which then indexes the OSD weight array with a negative value. Reject zero bucket types while decoding the CRUSH map so the invalid state never reaches the mapper.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68145

iomap: fix out-of-bounds bitmap_set() with zero-length range

In the Linux kernel, the following vulnerability has been resolved: iomap: fix out-of-bounds bitmap_set() with zero-length range ifs_set_range_dirty() and ifs_set_range_uptodate() compute last_blk as (off + len - 1) >> i_blkbits. When off is 0 and len is 0, the unsigned subtraction underflows to SIZE_MAX, producing a huge last_blk and nr_blks value that causes bitmap_set() to write far beyond the ifs->state allocation. Regarding ifs_set_range_uptodate(), it is temporarily safe because len cannot be passed in as 0. However, for ifs_set_range_dirty() this is reachable from __iomap_write_end(): when copy_folio_from_iter_atomic() returns 0 (e.g. user buffer fault) and the folio is already uptodate, the guard at the top of __iomap_write_end() does not trigger because !folio_test_uptodate() is false, and iomap_set_range_dirty() is called with copied == 0. Add a !len guard to both functions before the computation, so that a zero-length range is a no-op.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68125

mac802154: llsec: reject frames shorter than the authentication tag

In the Linux kernel, the following vulnerability has been resolved: mac802154: llsec: reject frames shorter than the authentication tag llsec_do_decrypt_auth() computes the associated-data length for the AEAD request as assoclen += datalen - authlen; where datalen is the number of bytes after the MAC header and authlen (4, 8 or 16) is the length of the authentication tag. Nothing verifies that the frame actually carries at least authlen payload bytes. A secured frame whose payload is shorter than the tag makes datalen - authlen negative; assoclen is then passed to aead_request_set_ad() as an unsigned value close to 4 GiB, so crypto_aead_decrypt() walks far off the end of the scatterlist that only spans the real frame. The frame is fully attacker-controlled and reaches this path from any IEEE 802.15.4 peer in radio range. Reject frames whose payload is shorter than the authentication tag before the subtraction. Dynamically reproduced on a KASAN kernel as a general-protection-fault in the AEAD scatterwalk, and the fix confirmed.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68123

openvswitch: fix GSO userspace truncation underflow

In the Linux kernel, the following vulnerability has been resolved: openvswitch: fix GSO userspace truncation underflow OVS_ACTION_ATTR_TRUNC currently stores a delta from the original skb length in OVS_CB(skb)->cutlen. When a later userspace action segments a GSO skb, queue_gso_packets() reuses that delta for each smaller segment. A segment can then reach queue_userspace_packet() with cutlen greater than skb->len, underflowing the length passed to skb_zerocopy(). Store the maximum preserved length instead and bound each consumer against the current skb length. Use U32_MAX as the no-truncation sentinel so the value remains valid if skb geometry changes before a consumer handles it.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68108

drm/amdgpu/vce: fix integer overflow in image size

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vce: fix integer overflow in image size Fix a security vulnerability where malicious VCE command streams with oversized dimensions (e.g. 65536×65536) cause 32-bit integer overflow, wrapping the calculated buffer size to 0. This bypasses validation and allows GPU firmware to perform out-of-bound memory access. The fix uses 64-bit arithmetic to detect overflow and rejects invalid dimensions before they reach the hardware. V2: remove redundant check V3: modify max height value V4: remove size64 (cherry picked from commit cbe408dba581755ad1279a487ec786d8927d778d)

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68100

ksmbd: validate num_subauth when copying ACE in set_ntacl_dacl

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate num_subauth when copying ACE in set_ntacl_dacl set_ntacl_dacl() copies each ACE from the attacker-controlled stored security descriptor verbatim into the response DACL without checking sid.num_subauth. The ACE bytes (including an unchecked num_subauth) originate from an authenticated SMB2_SET_INFO(SecInfo=DACL) that is stored raw via ksmbd_vfs_set_sd_xattr(); parse_dacl() rejects a bad ACE with `break` rather than an error, so parse_sec_desc() still returns success and the malformed SD reaches the xattr intact. On a subsequent SMB2_QUERY_INFO(SecInfo=DACL) for an inode carrying a POSIX access ACL, build_sec_desc() -> set_ntacl_dacl() -> set_posix_acl_entries_dacl() walks the copied ACEs and reads ntace->sid.sub_auth[ntace->sid.num_subauth - 1] with num_subauth taken straight from the stored SD. Since sub_auth[] is fixed at SID_MAX_SUB_AUTHORITIES (15), a crafted num_subauth (e.g. 255) drives an out-of-bounds heap read of ~1 KB with an offset fully controlled by an authenticated client. The sibling functions already gate this field: parse_dacl() -- num_subauth == 0 || > SID_MAX_SUB_AUTHORITIES parse_sid() -- num_subauth > SID_MAX_SUB_AUTHORITIES smb_copy_sid() -- min_t(u8, num_subauth, SID_MAX_SUB_AUTHORITIES) set_ntacl_dacl() is the lone inconsistent path that omits the check. Add the same num_subauth validation in set_ntacl_dacl() before copying the ACE, matching the gate already enforced by parse_dacl().

CVSS 3.1 · 8.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64559

s390/pkey: Check length in PKEY_VERIFYPROTK ioctl

In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Check length in PKEY_VERIFYPROTK ioctl Explicitly check the buffer length request structure provided by user-space and fail, if it exceeds the buffer size.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64558

s390/pkey: Check length in pkey_pckmo handler implementation

In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Check length in pkey_pckmo handler implementation Explicitly check the length of the target buffer in the pkey_pckmo implementation of the key_to_protkey() handler function. The handler function fails, if the generated output data exceeds the length of the provided target buffer.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64548

bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data()

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data() When the scatterlist ring is full or nearly full, bpf_msg_push_data() enters a copy fallback path and computes copy + len for the page allocation size. Since len comes from BPF with arg3_type = ARG_ANYTHING and both are u32, a crafted len can wrap the sum to a small value, causing an undersized allocation followed by an out-of-bounds memcpy. BUG: unable to handle page fault for address: ffffed104089a402 Oops: Oops: 0000 [#1] SMP KASAN NOPTI Call Trace: __asan_memcpy (mm/kasan/shadow.c:105) bpf_msg_push_data (net/core/filter.c:2852 net/core/filter.c:2788) bpf_prog_9ed8b5711920a7d7+0x2e/0x36 sk_psock_msg_verdict (net/core/skmsg.c:934) tcp_bpf_sendmsg (net/ipv4/tcp_bpf.c:421 net/ipv4/tcp_bpf.c:584) __sys_sendto (net/socket.c:2206) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Add an overflow check before the allocation.

CVSS 3.1 · 8.4 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64546

drm/edid: fix OOB read in drm_parse_tiled_block()

In the Linux kernel, the following vulnerability has been resolved: drm/edid: fix OOB read in drm_parse_tiled_block() drm_parse_tiled_block() casts the DisplayID block to a struct displayid_tiled_block and reads the full fixed layout up to tile->topology_id[7] without checking block->num_bytes. The DisplayID iterator only validates the declared payload length, so a crafted EDID can advertise a tiled-display block (tag DATA_BLOCK_TILED_DISPLAY, or DATA_BLOCK_2_TILED_DISPLAY_TOPOLOGY for v2.0) with a small num_bytes at the end of a DisplayID extension. The read then runs past the end of the exact-sized kmemdup()'d EDID allocation, a heap out-of-bounds read. Reject blocks shorter than the spec's 22-byte tiled payload before reading the fixed struct, as drm_parse_vesa_mso_data() already does. BUG: KASAN: slab-out-of-bounds in drm_edid_connector_update Read of size 2 at addr ffff888010077700 by task exploit/147 dump_stack_lvl (lib/dump_stack.c:94 ...) print_report (mm/kasan/report.c:378 ...) kasan_report (mm/kasan/report.c:595) drm_edid_connector_update (drivers/gpu/drm/drm_edid.c:7581) bochs_connector_helper_get_modes (drivers/gpu/drm/tiny/bochs.c:574) drm_helper_probe_single_connector_modes (drivers/gpu/drm/drm_probe_helper.c:426) status_store (drivers/gpu/drm/drm_sysfs.c:219) ... vfs_write (fs/read_write.c:595 fs/read_write.c:688) ksys_write (fs/read_write.c:740)

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64532

fs/ntfs3: bound NTFS_DE view.data_off in UpdateRecordData{Root,Allocation}

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: bound NTFS_DE view.data_off in UpdateRecordData{Root,Allocation} In do_action()'s UpdateRecordDataRoot (fslog.c:3489) and UpdateRecordDataAllocation (fslog.c:3697) cases, the memmove destination is `Add2Ptr(e, le16_to_cpu(e->view.data_off))`, where e->view.data_off comes from an on-disk NTFS_DE inside an INDEX_ROOT or INDEX_BUFFER. Neither case validates view.data_off + dlen against e->size; the existing check_if_index_root / check_if_alloc_index helpers walk the entry chain and validate the entry's offset, but not its internal view fields. The neighbouring read sites (e.g., fs/ntfs3/index.c when iterating view entries) check view.data_off + view.data_size <= e->size. Apply the same bound at the two memmove sites. Reproduced under UML+KASAN on mainline 8d90b09e6741 via pr_warn-only probe instrumentation: with view.data_off forced to 0xFFFC, the memmove writes 32 bytes past the end of the NTFS_DE. This is similar in shape to Pavitra Jha's 2026-05-02 patch "fs/ntfs3: prevent oob in case UpdateRecordDataRoot" (<20260502105008.21827-1-jhapavitra98@gmail.com>) which proposes calling ntfs3_bad_de_range(); that helper does not exist in mainline. This patch uses inline checks.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64490

ALSA: virtio: Validate control metadata from the device

In the Linux kernel, the following vulnerability has been resolved: ALSA: virtio: Validate control metadata from the device virtio-snd control handling trusts the device-provided control type and value count returned by the device. That metadata is then used directly to index g_v2a_type_map[] in virtsnd_kctl_info(), and to size loops and memcpy() operations in virtsnd_kctl_get() and virtsnd_kctl_put() against fixed-size virtio_snd_ctl_value and snd_ctl_elem_value arrays. A buggy or malicious device can therefore trigger out-of-bounds access by advertising an invalid control type or an oversized value count. Validate control type and count once in virtsnd_kctl_parse_cfg(), before querying enumerated items or exposing the control to ALSA.

CVSS 3.1 · 8.4 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64436

net: af_key: initialize alg_key_len for IPComp states

In the Linux kernel, the following vulnerability has been resolved: net: af_key: initialize alg_key_len for IPComp states pfkey_msg2xfrm_state() handles the IPComp (SADB_X_SATYPE_IPCOMP) case by allocating x->calg and copying only the algorithm name: x->calg = kmalloc_obj(*x->calg); if (!x->calg) { err = -ENOMEM; goto out; } strcpy(x->calg->alg_name, a->name); x->props.calgo = sa->sadb_sa_encrypt; Unlike the authentication (x->aalg) and encryption (x->ealg) branches of the same function, the compression branch never initializes calg->alg_key_len. IPComp carries no key and the allocation only reserves sizeof(struct xfrm_algo) (i.e. no room for a key), so the field is left containing uninitialized slab data. calg->alg_key_len is later used as a length by xfrm_algo_clone() when an IPComp state is cloned during XFRM_MSG_MIGRATE: xfrm_state_migrate() xfrm_state_clone_and_setup() x->calg = xfrm_algo_clone(orig->calg); kmemdup(orig, xfrm_alg_len(orig)); where xfrm_alg_len() returns sizeof(*alg) + (alg_key_len + 7) / 8. With a non-zero garbage alg_key_len, kmemdup() reads past the end of the 68-byte calg object. Adding an IPComp SA via PF_KEY and then migrating it triggers (net-next, KASAN, init_on_alloc=0): BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x44/0x60 Read of size 4164 at addr ff11000025a74980 by task diag2/9287 CPU: 3 UID: 0 PID: 9287 Comm: diag2 7.1.0-rc6-g903db046d557 #1 Call Trace: <TASK> dump_stack_lvl+0x10e/0x1f0 print_report+0xf7/0x600 kasan_report+0xe4/0x120 kasan_check_range+0x105/0x1b0 __asan_memcpy+0x23/0x60 kmemdup_noprof+0x44/0x60 xfrm_state_migrate+0x70a/0x1da0 xfrm_migrate+0x753/0x18a0 xfrm_do_migrate+0xb47/0xf10 xfrm_user_rcv_msg+0x411/0xb50 netlink_rcv_skb+0x158/0x420 xfrm_netlink_rcv+0x71/0x90 netlink_unicast+0x584/0x850 netlink_sendmsg+0x8b0/0xdc0 ____sys_sendmsg+0x9f7/0xb90 ___sys_sendmsg+0x134/0x1d0 __sys_sendmsg+0x16d/0x220 do_syscall_64+0x116/0x7d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 9287: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 pfkey_add+0x2652/0x2ea0 pfkey_process+0x6d0/0x830 pfkey_sendmsg+0x42c/0x850 __sys_sendto+0x461/0x4b0 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x116/0x7d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The buggy address belongs to the object at ff11000025a74980 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 0 bytes inside of allocated 68-byte region [ff11000025a74980, ff11000025a749c4) Depending on the uninitialized value the same field can instead request an oversized kmemdup() allocation and make the migration clone fail. The XFRM netlink path is not affected: verify_one_alg() rejects an XFRMA_ALG_COMP attribute shorter than xfrm_alg_len(), so a calg added via XFRM_MSG_NEWSA is always self-consistent. Initialize calg->alg_key_len to 0, matching the aalg/ealg branches.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64403

Bluetooth: L2CAP: validate option length before reading conf opt value

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: validate option length before reading conf opt value l2cap_get_conf_opt() derives the option length from the attacker-controlled opt->len field and immediately dereferences opt->val (as u8, get_unaligned_le16() or get_unaligned_le32(), or a raw pointer for the default case) before any caller has confirmed that opt->len bytes are present in the buffer. The callers (l2cap_parse_conf_req(), l2cap_parse_conf_rsp() and l2cap_conf_rfc_get()) only detect a malformed option afterwards, once the running length has gone negative, by which point the out-of-bounds read has already executed. An existing post-hoc length check keeps the garbage value from being consumed, so this is not a data leak in the current control flow. It is still a validate-after-use ordering bug: up to 4 bytes are read past the end of the buffer before it is known to contain them, and it is fragile to future changes in the callers. Fix it at the source. Pass the end of the buffer into l2cap_get_conf_opt() and refuse to touch opt->val unless the full option (header + value) fits. Each caller computes an end pointer once before the loop and checks the return value directly instead of inferring the error from a negative length.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64364

HID: multitouch: fix out-of-bounds bit access on mt_io_flags

In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: fix out-of-bounds bit access on mt_io_flags mt_io_flags is a single unsigned long, but mt_process_slot(), mt_release_pending_palms() and mt_release_contacts() use it as a per-slot bitmap indexed by the slot number. That slot number is only bounded by td->maxcontacts, which is taken from the device's ContactCountMaximum feature report and can be up to 255, not by BITS_PER_LONG. As a result, a multitouch device that advertises a large contact count makes set_bit()/clear_bit() operate past the mt_io_flags word and corrupt the adjacent members of struct mt_device. The sticky-fingers release timer is the easiest way to reach this. mt_release_contacts() runs for (i = 0; i < mt->num_slots; i++) clear_bit(i, &td->mt_io_flags); with num_slots == maxcontacts. For maxcontacts around 250 the loop clears the bits that overlap td->applications.next, zeroing that list head, and the list_for_each_entry() that immediately follows then dereferences NULL. The kernel panics from timer (softirq) context. On a KASAN build this shows up as a general protection fault in mt_release_contacts() with a null-ptr-deref at offset 0x58, which is offsetof(struct mt_application, num_received). The state is reachable from an untrusted USB or Bluetooth HID multitouch device; no local privileges are required. Store the per-slot active state in a separately allocated bitmap sized for maxcontacts, the same pattern already used for pending_palm_slots, and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two "mt_io_flags & MT_IO_SLOTS_MASK" arming checks become bitmap_empty(td->active_slots, td->maxcontacts). Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the same commit to leave the low byte for the slot bits; with the slot bits gone it fits in bit 0 again, which also keeps it within the unsigned long on 32-bit.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64355

bpf: Reject fragmented frames in devmap

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject fragmented frames in devmap Devmap broadcast redirects clone the packet for all but the last destination. For native XDP, that clone path copies only the linear xdp_frame data, while fragmented frames keep skb_shared_info in tailroom outside the linear area. Cloning such a frame leaves XDP_FLAGS_HAS_FRAGS set but without valid frag metadata, and the later free path can interpret uninitialized tail data as skb_shared_info, leading to an out-of-bounds access during frame return. Reject fragmented native XDP frames in dev_map_enqueue_clone(). Add the same restriction to the generic XDP clone path in dev_map_redirect_clone(). Generic XDP represents fragmented packets as nonlinear skbs, and rejecting them here keeps clone-based broadcast support aligned between native and generic XDP.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64354

bpf: Validate BTF repeated field counts before expansion

In the Linux kernel, the following vulnerability has been resolved: bpf: Validate BTF repeated field counts before expansion btf_parse_struct_metas() walks user-supplied BTF during BPF_BTF_LOAD, and btf_repeat_fields() expands repeatable fields from array elements into the fixed BTF_FIELDS_MAX scratch array used by btf_parse_fields(). The remaining-capacity check performs the expanded field count calculation in u32. A malformed BTF can wrap that calculation, causing the check to pass even when the expanded field count exceeds the scratch array capacity. The following memcpy() can then write past the end of the array. Use checked addition and multiplication before copying repeated fields and reject impossible counts.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64324

udf: validate free block extents against the partition length

In the Linux kernel, the following vulnerability has been resolved: udf: validate free block extents against the partition length udf_free_blocks() checks the logical block number and count against the partition length, but drops the extent offset from that final bound. A crafted extent can pass the guard while logicalBlockNum + offset + count points past the partition, which later indexes past the space bitmap array. A single ftruncate(2) on a file backed by such an extent reliably panics the kernel. This is a local availability issue. On desktop systems where UDisks/polkit allows the active user to mount removable UDF media without CAP_SYS_ADMIN, an unprivileged local user can supply the crafted filesystem and trigger the panic by truncating a writable file on it. Systems that require root or CAP_SYS_ADMIN to mount the image have a higher prerequisite. No confidentiality or integrity impact is claimed: the reproduced primitive is an out-of-bounds read of a bitmap pointer slot followed by a kernel panic. Use the already computed logicalBlockNum + offset + count value for the partition length check. Also make load_block_bitmap() reject an out-of-range block group before indexing s_block_bitmap[], so corrupted callers cannot walk past the flexible array.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products