CVE-2026-98563

{"dataType": "CVE_RECORD", "dataVersion": "5.2", "cveMetadata": {"cveId": "CVE-2026-98563", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2026-09-25T10:25:14.357Z", "datePublished": "2026-10-18T15:18:30.158Z", "dateUpdated": "2026-10-19T09:21:47.748Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2026-10-19T09:21:47.748Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet: phylink: record the PHY only once bringup cannot fail\n\nphylink_bringup_phy() stores the PHY in pl->phydev before its last\nfallible step: on a MAC whose phylink ops implement LPI,\nphy_eee_rx_clock_stop() can fail with a real MDIO error. The callers\nunwind with phy_detach(), which knows nothing about pl->phydev, so a\npointer to a PHY that is no longer attached outlives the failed\nconnect.\n\nWhat that costs depends on how the caller got here.\nphylink_connect_phy() goes through phylink_attach_phy(), which refuses\nto attach while pl->phydev is set, turning a transient MDIO error into\na permanent -EBUSY. The SFP path is worse than that: sfp_sm_probe_phy()\nanswers the failure with phy_device_remove() and phy_device_free(), and\nit assigns sfp->mod_phy only past that error return, so nothing clears\npl->phydev and it is left pointing at a freed phy_device that\nphylink_resolve() and the ethtool helpers go on reading.\nphylink_fwnode_phy_connect() has no such check, so a later connect\noverwrites the stale pointer and hides the problem. A disconnect does\nnot: phylink_disconnect_phy() hands that pointer to phy_disconnect(),\nand the second phy_detach() on the same PHY drops references the first\none already released.\n\nFound while making a DSA port survive a PHY whose driver arrives after\nthe switch probes: keeping the port across a failed connect and\nretrying is what makes this window reachable.\n\nPublish the pointer after the last call that can fail instead of\nunwinding it afterwards. Nothing between the two points reads\npl->phydev, and the registration that follows cannot fail:\nphy_request_interrupt() falls back to polling on its own. The PHY-side\nstate keeps the order it had, so no MDIO operation moves relative to\nanother."}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/net/phy/phylink.c"], "versions": [{"version": "03abf2a7c65451e663b078b0ed1bfa648cd9380f", "lessThan": "4e7a4af364c2048bafb213bf0ef4a89dcbe1bfd4", "status": "affected", "versionType": "git"}, {"version": "03abf2a7c65451e663b078b0ed1bfa648cd9380f", "lessThan": "671a68654a9d319d7f0d53a6321db3d9b391bdef", "status": "affected", "versionType": "git"}, {"version": "03abf2a7c65451e663b078b0ed1bfa648cd9380f", "lessThan": "a940003f44e7e441c228151dd212642152700ec8", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/net/phy/phylink.c"], "versions": [{"version": "6.14", "status": "affected"}, {"version": "0", "lessThan": "6.14", "status": "unaffected", "versionType": "semver"}, {"version": "6.18.55", "lessThanOrEqual": "6.18.*", "status": "unaffected", "versionType": "semver"}, {"version": "7.2.9", "lessThanOrEqual": "7.2.*", "status": "unaffected", "versionType": "semver"}, {"version": "7.3", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.14", "versionEndExcluding": "6.18.55"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.14", "versionEndExcluding": "7.2.9"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.14", "versionEndExcluding": "7.3"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/4e7a4af364c2048bafb213bf0ef4a89dcbe1bfd4"}, {"url": "https://git.kernel.org/stable/c/671a68654a9d319d7f0d53a6321db3d9b391bdef"}, {"url": "https://git.kernel.org/stable/c/a940003f44e7e441c228151dd212642152700ec8"}], "title": "net: phylink: record the PHY only once bringup cannot fail", "x_generator": {"engine": "bippy-1.2.0"}}}}

{}

{"affected": [{"affectedData": [{"defaultStatus": "unaffected", "product": "Linux", "programFiles": ["drivers/net/phy/phylink.c"], "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "versions": [{"lessThan": "4e7a4af364c2048bafb213bf0ef4a89dcbe1bfd4", "status": "affected", "version": "03abf2a7c65451e663b078b0ed1bfa648cd9380f", "versionType": "git"}, {"lessThan": "671a68654a9d319d7f0d53a6321db3d9b391bdef", "status": "affected", "version": "03abf2a7c65451e663b078b0ed1bfa648cd9380f", "versionType": "git"}, {"lessThan": "a940003f44e7e441c228151dd212642152700ec8", "status": "affected", "version": "03abf2a7c65451e663b078b0ed1bfa648cd9380f", "versionType": "git"}]}, {"defaultStatus": "affected", "product": "Linux", "programFiles": ["drivers/net/phy/phylink.c"], "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "versions": [{"status": "affected", "version": "6.14"}, {"lessThan": "6.14", "status": "unaffected", "version": "0", "versionType": "semver"}, {"lessThanOrEqual": "6.18.*", "status": "unaffected", "version": "6.18.55", "versionType": "semver"}, {"lessThanOrEqual": "7.2.*", "status": "unaffected", "version": "7.2.9", "versionType": "semver"}, {"lessThanOrEqual": "*", "status": "unaffected", "version": "7.3", "versionType": "original_commit_for_fix"}]}], "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet: phylink: record the PHY only once bringup cannot fail\n\nphylink_bringup_phy() stores the PHY in pl->phydev before its last\nfallible step: on a MAC whose phylink ops implement LPI,\nphy_eee_rx_clock_stop() can fail with a real MDIO error. The callers\nunwind with phy_detach(), which knows nothing about pl->phydev, so a\npointer to a PHY that is no longer attached outlives the failed\nconnect.\n\nWhat that costs depends on how the caller got here.\nphylink_connect_phy() goes through phylink_attach_phy(), which refuses\nto attach while pl->phydev is set, turning a transient MDIO error into\na permanent -EBUSY. The SFP path is worse than that: sfp_sm_probe_phy()\nanswers the failure with phy_device_remove() and phy_device_free(), and\nit assigns sfp->mod_phy only past that error return, so nothing clears\npl->phydev and it is left pointing at a freed phy_device that\nphylink_resolve() and the ethtool helpers go on reading.\nphylink_fwnode_phy_connect() has no such check, so a later connect\noverwrites the stale pointer and hides the problem. A disconnect does\nnot: phylink_disconnect_phy() hands that pointer to phy_disconnect(),\nand the second phy_detach() on the same PHY drops references the first\none already released.\n\nFound while making a DSA port survive a PHY whose driver arrives after\nthe switch probes: keeping the port across a failed connect and\nretrying is what makes this window reachable.\n\nPublish the pointer after the last call that can fail instead of\nunwinding it afterwards. Nothing between the two points reads\npl->phydev, and the registration that follows cannot fail:\nphy_request_interrupt() falls back to polling on its own. The PHY-side\nstate keeps the order it had, so no MDIO operation moves relative to\nanother."}], "id": "CVE-2026-98563", "lastModified": "2026-10-19T10:19:12.930", "metrics": {}, "published": "2026-10-18T16:17:08.443", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/4e7a4af364c2048bafb213bf0ef4a89dcbe1bfd4"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/671a68654a9d319d7f0d53a6321db3d9b391bdef"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/a940003f44e7e441c228151dd212642152700ec8"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Received"}

{"bugzilla": {"description": "kernel: net: phylink: record the PHY only once bringup cannot fail", "id": "2555015", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2555015"}, "csaw": false, "cvss3": {"cvss3_base_score": "4.1", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H", "status": "draft"}, "cwe": "CWE-825", "details": ["In the Linux kernel, the following vulnerability has been resolved:\nnet: phylink: record the PHY only once bringup cannot fail\nphylink_bringup_phy() stores the PHY in pl->phydev before its last\nfallible step: on a MAC whose phylink ops implement LPI,\nphy_eee_rx_clock_stop() can fail with a real MDIO error. The callers\nunwind with phy_detach(), which knows nothing about pl->phydev, so a\npointer to a PHY that is no longer attached outlives the failed\nconnect.\nWhat that costs depends on how the caller got here.\nphylink_connect_phy() goes through phylink_attach_phy(), which refuses\nto attach while pl->phydev is set, turning a transient MDIO error into\na permanent -EBUSY. The SFP path is worse than that: sfp_sm_probe_phy()\nanswers the failure with phy_device_remove() and phy_device_free(), and\nit assigns sfp->mod_phy only past that error return, so nothing clears\npl->phydev and it is left pointing at a freed phy_device that\nphylink_resolve() and the ethtool helpers go on reading.\nphylink_fwnode_phy_connect() has no such check, so a later connect\noverwrites the stale pointer and hides the problem. A disconnect does\nnot: phylink_disconnect_phy() hands that pointer to phy_disconnect(),\nand the second phy_detach() on the same PHY drops references the first\none already released.\nFound while making a DSA port survive a PHY whose driver arrives after\nthe switch probes: keeping the port across a failed connect and\nretrying is what makes this window reachable.\nPublish the pointer after the last call that can fail instead of\nunwinding it afterwards. Nothing between the two points reads\npl->phydev, and the registration that follows cannot fail:\nphy_request_interrupt() falls back to polling on its own. The PHY-side\nstate keeps the order it had, so no MDIO operation moves relative to\nanother.", "A flaw was found in the Linux kernel's phylink component. When an error occurs during Ethernet physical layer (PHY) device initialization, the kernel prematurely stores a reference to the device before setup finishes. If the bringup operation fails, the device is detached and freed, but the kernel retains a stale pointer. A local user with administrative privileges or network hardware events triggering connection retries can cause the kernel to access this freed memory, leading to memory corruption or a Denial of Service (DoS) via a system crash."], "name": "CVE-2026-98563", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:10", "fix_state": "Fix deferred", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 10"}, {"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Fix deferred", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/a:redhat:openshift:4", "fix_state": "Not affected", "package_name": "openshift/ose-rhel-coreos-8", "product_name": "Red Hat OpenShift Container Platform 4"}, {"cpe": "cpe:/a:redhat:openshift:4", "fix_state": "Fix deferred", "package_name": "openshift/ose-rhel-coreos-9", "product_name": "Red Hat OpenShift Container Platform 4"}], "public_date": "2026-10-18T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2026-98563\nhttps://nvd.nist.gov/vuln/detail/CVE-2026-98563\nhttps://git.kernel.org/pub/scm/linux/security/vulns.git/plain/cve/published/2026/CVE-2026-98563.mbox"], "threat_severity": "Moderate"}

{"affected": [{"configurations": [{"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[03abf2a7c65451e663b078b0ed1bfa648cd9380f,4e7a4af364c2048bafb213bf0ef4a89dcbe1bfd4)"}}, {"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[03abf2a7c65451e663b078b0ed1bfa648cd9380f,671a68654a9d319d7f0d53a6321db3d9b391bdef)"}}, {"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[03abf2a7c65451e663b078b0ed1bfa648cd9380f,a940003f44e7e441c228151dd212642152700ec8)"}}], "enrichment": {"confidence": 99.0, "confidence_source": "inferred", "scores": [{"score": 99.0, "source": "inferred"}, {"score": 100.0, "source": "matching"}]}, "original": {"product": "Linux", "source": "cna", "vendor": "Linux"}, "product": "linux_kernel", "vendor": "linux"}, {"configurations": [{"platform": null, "status": "affected", "versions": {"scheme": "semver", "value": "6.14"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "semver", "value": "[0,6.14)"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "semver", "value": "[6.18.55,6.19.0)"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "semver", "value": "[7.2.9,7.3.0)"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "generic", "value": "[7.3,*]"}}], "enrichment": {"confidence": 99.0, "confidence_source": "inferred", "scores": [{"score": 99.0, "source": "inferred"}, {"score": 100.0, "source": "matching"}]}, "original": {"product": "Linux", "source": "cna", "vendor": "Linux"}, "product": "linux_kernel", "vendor": "linux"}], "created": "2026-10-18T23:15:14.330838+00:00", "updated": "2026-10-20T20:15:07.189063+00:00", "vendors": ["linux", "linux$PRODUCT$linux_kernel"], "weaknesses": ["CWE-416", "CWE-825"]}