CVE-2026-74456

{"dataType": "CVE_RECORD", "dataVersion": "5.2", "cveMetadata": {"cveId": "CVE-2026-74456", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2026-08-15T05:44:03.900Z", "datePublished": "2026-08-15T12:26:58.808Z", "dateUpdated": "2026-10-16T19:05:46.867Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2026-08-19T16:36:51.237Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ncan: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error\n\nIn peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc()\nand the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also\nfrees the transfer buffer.\n\nIf usb_submit_urb() fails, the error path frees the buffer explicitly with\nkfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set,\nusb_free_urb() -> urb_destroy() frees the same buffer a second time, a double\nfree of the transfer buffer.\n\n BUG: KASAN: double-free in usb_free_urb.part.0+0x91/0xb0\n Free of addr ffff8881069ccb80 by task trigger.sh/285\n\n Call Trace:\n kfree+0x113/0x3c0\n usb_free_urb.part.0+0x91/0xb0\n\nDrop the redundant kfree(buf); usb_free_urb() already releases the transfer\nbuffer. This mirrors commit 03819abbeb11 (\"net: usb: lan78xx: Fix double free\nissue with interrupt buffer allocation\")."}], "metrics": [{"cvssV3_1": {"version": "3.1", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "baseScore": 7.8, "baseSeverity": "HIGH"}, "scenarios": [{"lang": "en", "value": "AV:L - The flaw is only reached when a privileged local actor brings the PEAK CAN netdev up via rtnetlink/ioctl (peak_usb_ndo_open\u2192peak_usb_start); CAN-bus traffic and remote protocols never call this setup path, but the entry is a local syscall rather than USB packet processing.\nAC:L - Any usb_submit_urb() failure on RX setup deterministically hits the broken error path; an attacker can reliably force -ENODEV/-ENOENT by disconnecting/resetting the adapter or presenting a rogue PEAK-class gadget while repeatedly running ip link set canX up/down.\nPR:L - Bringing the CAN interface up requires CAP_NET_ADMIN on RTM_SETLINK (rtnl_setlink/netif_open), which is Low under CNA guidance; on automotive/industrial diagnostic hosts this is commonly held by technician/service accounts even though unauthenticated remote attackers cannot reach the path.\nUI:N - No separate victim interaction is needed beyond the attacker (or their malware) issuing the privileged link-up that enters peak_usb_start; they can also script repeated up/down cycles while manipulating USB state themselves.\nS:U - The double-free corrupts host kernel kmalloc slab state within the peak_usb driver scope and does not by itself cross a security boundary such as VM escape, container breakout, or IOMMU bypass.\nC:H - This is a kmalloc RX-buffer double-free with URB_FREE_BUFFER set; per CNA guidance such heap double-free/UAF-class bugs enable controlled reallocation and arbitrary kernel memory disclosure, not merely a bounded leak.\nI:H - Freeing the same 64\u20132048 byte RX slab object twice corrupts SLUB freelist/metadata and provides a standard heap corruption primitive that can be groomed into arbitrary kernel writes or control-flow hijacking.\nA:H - KASAN already reports a double-free in usb_free_urb() on this path; even without full exploitation, allocator corruption typically causes kernel BUG/oops/panic and repeated trigger cycles can deny CAN/USB service on shared diagnostic systems."}]}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/net/can/usb/peak_usb/pcan_usb_core.c"], "versions": [{"version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "lessThan": "914c3b8fa175acf8476ad31cf04e308638e3578e", "status": "affected", "versionType": "git"}, {"version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "lessThan": "5f2fa5840c34d3a558c57855781be75e03bef752", "status": "affected", "versionType": "git"}, {"version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "lessThan": "b9088d581fff971a7eb1628f8dcc30df6cfef4dc", "status": "affected", "versionType": "git"}, {"version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "lessThan": "525640b93d3e5f82f4ebea4730f4e0cf799522ba", "status": "affected", "versionType": "git"}, {"version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "lessThan": "4bb3325075138dd5346b71589a959878b564dc0b", "status": "affected", "versionType": "git"}, {"version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "lessThan": "92d0de80ca2223b9c7da78020155b6cb27824cc0", "status": "affected", "versionType": "git"}, {"version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "lessThan": "dfb17bf04a764462000f11258a7c06aa92d1f261", "status": "affected", "versionType": "git"}, {"version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "lessThan": "9b3d5a6d952c38bbcf07f903cbeadefdb56b9bc9", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/net/can/usb/peak_usb/pcan_usb_core.c"], "versions": [{"version": "3.4", "status": "affected"}, {"version": "0", "lessThan": "3.4", "status": "unaffected", "versionType": "semver"}, {"version": "5.10.265", "lessThanOrEqual": "5.10.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.15.216", "lessThanOrEqual": "5.15.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.1.183", "lessThanOrEqual": "6.1.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.6.151", "lessThanOrEqual": "6.6.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.12.103", "lessThanOrEqual": "6.12.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.18.44", "lessThanOrEqual": "6.18.*", "status": "unaffected", "versionType": "semver"}, {"version": "7.1.8", "lessThanOrEqual": "7.1.*", "status": "unaffected", "versionType": "semver"}, {"version": "7.2", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "3.4", "versionEndExcluding": "5.10.265"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "3.4", "versionEndExcluding": "5.15.216"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "3.4", "versionEndExcluding": "6.1.183"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "3.4", "versionEndExcluding": "6.6.151"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "3.4", "versionEndExcluding": "6.12.103"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "3.4", "versionEndExcluding": "6.18.44"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "3.4", "versionEndExcluding": "7.1.8"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "3.4", "versionEndExcluding": "7.2"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/914c3b8fa175acf8476ad31cf04e308638e3578e"}, {"url": "https://git.kernel.org/stable/c/5f2fa5840c34d3a558c57855781be75e03bef752"}, {"url": "https://git.kernel.org/stable/c/b9088d581fff971a7eb1628f8dcc30df6cfef4dc"}, {"url": "https://git.kernel.org/stable/c/525640b93d3e5f82f4ebea4730f4e0cf799522ba"}, {"url": "https://git.kernel.org/stable/c/4bb3325075138dd5346b71589a959878b564dc0b"}, {"url": "https://git.kernel.org/stable/c/92d0de80ca2223b9c7da78020155b6cb27824cc0"}, {"url": "https://git.kernel.org/stable/c/dfb17bf04a764462000f11258a7c06aa92d1f261"}, {"url": "https://git.kernel.org/stable/c/9b3d5a6d952c38bbcf07f903cbeadefdb56b9bc9"}], "title": "can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error", "x_generator": {"engine": "bippy-1.2.0"}}, "adp": [{"metrics": [{"other": {"type": "ssvc", "content": {"id": "CVE-2026-74456", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "total"}], "version": "2.0.3", "timestamp": "2026-10-16T18:56:58.741801Z"}}}], "title": "CISA ADP Vulnrichment", "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2026-10-16T19:05:46.867Z"}}]}}

{"dataType": "CVE_RECORD", "containers": {"adp": [{"title": "CISA ADP Vulnrichment", "metrics": [{"other": {"type": "ssvc", "content": {"id": "CVE-2026-74456", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "total"}], "version": "2.0.3", "timestamp": "2026-10-16T18:56:58.741801Z"}}}], "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2026-10-16T18:56:59.775Z"}}], "cna": {"title": "can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error", "metrics": [{"cvssV3_1": {"version": "3.1", "baseScore": 7.8, "baseSeverity": "HIGH", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"}, "scenarios": [{"lang": "en", "value": "AV:L - The flaw is only reached when a privileged local actor brings the PEAK CAN netdev up via rtnetlink/ioctl (peak_usb_ndo_open\u2192peak_usb_start); CAN-bus traffic and remote protocols never call this setup path, but the entry is a local syscall rather than USB packet processing.\nAC:L - Any usb_submit_urb() failure on RX setup deterministically hits the broken error path; an attacker can reliably force -ENODEV/-ENOENT by disconnecting/resetting the adapter or presenting a rogue PEAK-class gadget while repeatedly running ip link set canX up/down.\nPR:L - Bringing the CAN interface up requires CAP_NET_ADMIN on RTM_SETLINK (rtnl_setlink/netif_open), which is Low under CNA guidance; on automotive/industrial diagnostic hosts this is commonly held by technician/service accounts even though unauthenticated remote attackers cannot reach the path.\nUI:N - No separate victim interaction is needed beyond the attacker (or their malware) issuing the privileged link-up that enters peak_usb_start; they can also script repeated up/down cycles while manipulating USB state themselves.\nS:U - The double-free corrupts host kernel kmalloc slab state within the peak_usb driver scope and does not by itself cross a security boundary such as VM escape, container breakout, or IOMMU bypass.\nC:H - This is a kmalloc RX-buffer double-free with URB_FREE_BUFFER set; per CNA guidance such heap double-free/UAF-class bugs enable controlled reallocation and arbitrary kernel memory disclosure, not merely a bounded leak.\nI:H - Freeing the same 64\u20132048 byte RX slab object twice corrupts SLUB freelist/metadata and provides a standard heap corruption primitive that can be groomed into arbitrary kernel writes or control-flow hijacking.\nA:H - KASAN already reports a double-free in usb_free_urb() on this path; even without full exploitation, allocator corruption typically causes kernel BUG/oops/panic and repeated trigger cycles can deny CAN/USB service on shared diagnostic systems."}]}], "affected": [{"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "lessThan": "914c3b8fa175acf8476ad31cf04e308638e3578e", "versionType": "git"}, {"status": "affected", "version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "lessThan": "5f2fa5840c34d3a558c57855781be75e03bef752", "versionType": "git"}, {"status": "affected", "version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "lessThan": "b9088d581fff971a7eb1628f8dcc30df6cfef4dc", "versionType": "git"}, {"status": "affected", "version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "lessThan": "525640b93d3e5f82f4ebea4730f4e0cf799522ba", "versionType": "git"}, {"status": "affected", "version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "lessThan": "4bb3325075138dd5346b71589a959878b564dc0b", "versionType": "git"}, {"status": "affected", "version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "lessThan": "92d0de80ca2223b9c7da78020155b6cb27824cc0", "versionType": "git"}, {"status": "affected", "version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "lessThan": "dfb17bf04a764462000f11258a7c06aa92d1f261", "versionType": "git"}, {"status": "affected", "version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "lessThan": "9b3d5a6d952c38bbcf07f903cbeadefdb56b9bc9", "versionType": "git"}], "programFiles": ["drivers/net/can/usb/peak_usb/pcan_usb_core.c"], "defaultStatus": "unaffected"}, {"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "3.4"}, {"status": "unaffected", "version": "0", "lessThan": "3.4", "versionType": "semver"}, {"status": "unaffected", "version": "5.10.265", "versionType": "semver", "lessThanOrEqual": "5.10.*"}, {"status": "unaffected", "version": "5.15.216", "versionType": "semver", "lessThanOrEqual": "5.15.*"}, {"status": "unaffected", "version": "6.1.183", "versionType": "semver", "lessThanOrEqual": "6.1.*"}, {"status": "unaffected", "version": "6.6.151", "versionType": "semver", "lessThanOrEqual": "6.6.*"}, {"status": "unaffected", "version": "6.12.103", "versionType": "semver", "lessThanOrEqual": "6.12.*"}, {"status": "unaffected", "version": "6.18.44", "versionType": "semver", "lessThanOrEqual": "6.18.*"}, {"status": "unaffected", "version": "7.1.8", "versionType": "semver", "lessThanOrEqual": "7.1.*"}, {"status": "unaffected", "version": "7.2", "versionType": "original_commit_for_fix", "lessThanOrEqual": "*"}], "programFiles": ["drivers/net/can/usb/peak_usb/pcan_usb_core.c"], "defaultStatus": "affected"}], "references": [{"url": "https://git.kernel.org/stable/c/914c3b8fa175acf8476ad31cf04e308638e3578e"}, {"url": "https://git.kernel.org/stable/c/5f2fa5840c34d3a558c57855781be75e03bef752"}, {"url": "https://git.kernel.org/stable/c/b9088d581fff971a7eb1628f8dcc30df6cfef4dc"}, {"url": "https://git.kernel.org/stable/c/525640b93d3e5f82f4ebea4730f4e0cf799522ba"}, {"url": "https://git.kernel.org/stable/c/4bb3325075138dd5346b71589a959878b564dc0b"}, {"url": "https://git.kernel.org/stable/c/92d0de80ca2223b9c7da78020155b6cb27824cc0"}, {"url": "https://git.kernel.org/stable/c/dfb17bf04a764462000f11258a7c06aa92d1f261"}, {"url": "https://git.kernel.org/stable/c/9b3d5a6d952c38bbcf07f903cbeadefdb56b9bc9"}], "x_generator": {"engine": "bippy-1.2.0"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ncan: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error\n\nIn peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc()\nand the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also\nfrees the transfer buffer.\n\nIf usb_submit_urb() fails, the error path frees the buffer explicitly with\nkfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set,\nusb_free_urb() -> urb_destroy() frees the same buffer a second time, a double\nfree of the transfer buffer.\n\n BUG: KASAN: double-free in usb_free_urb.part.0+0x91/0xb0\n Free of addr ffff8881069ccb80 by task trigger.sh/285\n\n Call Trace:\n kfree+0x113/0x3c0\n usb_free_urb.part.0+0x91/0xb0\n\nDrop the redundant kfree(buf); usb_free_urb() already releases the transfer\nbuffer. This mirrors commit 03819abbeb11 (\"net: usb: lan78xx: Fix double free\nissue with interrupt buffer allocation\")."}], "cpeApplicability": [{"nodes": [{"negate": false, "cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "5.10.265", "versionStartIncluding": "3.4"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "5.15.216", "versionStartIncluding": "3.4"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.1.183", "versionStartIncluding": "3.4"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.6.151", "versionStartIncluding": "3.4"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.12.103", "versionStartIncluding": "3.4"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.18.44", "versionStartIncluding": "3.4"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "7.1.8", "versionStartIncluding": "3.4"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "7.2", "versionStartIncluding": "3.4"}], "operator": "OR"}]}], "providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2026-08-19T16:36:51.237Z"}}}, "cveMetadata": {"cveId": "CVE-2026-74456", "state": "PUBLISHED", "dateUpdated": "2026-10-16T19:05:46.867Z", "dateReserved": "2026-08-15T05:44:03.900Z", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "datePublished": "2026-08-15T12:26:58.808Z", "assignerShortName": "Linux"}, "dataVersion": "5.2"}

{"affected": [{"affectedData": [{"defaultStatus": "unaffected", "product": "Linux", "programFiles": ["drivers/net/can/usb/peak_usb/pcan_usb_core.c"], "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "versions": [{"lessThan": "914c3b8fa175acf8476ad31cf04e308638e3578e", "status": "affected", "version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "versionType": "git"}, {"lessThan": "5f2fa5840c34d3a558c57855781be75e03bef752", "status": "affected", "version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "versionType": "git"}, {"lessThan": "b9088d581fff971a7eb1628f8dcc30df6cfef4dc", "status": "affected", "version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "versionType": "git"}, {"lessThan": "525640b93d3e5f82f4ebea4730f4e0cf799522ba", "status": "affected", "version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "versionType": "git"}, {"lessThan": "4bb3325075138dd5346b71589a959878b564dc0b", "status": "affected", "version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "versionType": "git"}, {"lessThan": "92d0de80ca2223b9c7da78020155b6cb27824cc0", "status": "affected", "version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "versionType": "git"}, {"lessThan": "dfb17bf04a764462000f11258a7c06aa92d1f261", "status": "affected", "version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "versionType": "git"}, {"lessThan": "9b3d5a6d952c38bbcf07f903cbeadefdb56b9bc9", "status": "affected", "version": "bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d", "versionType": "git"}]}, {"defaultStatus": "affected", "product": "Linux", "programFiles": ["drivers/net/can/usb/peak_usb/pcan_usb_core.c"], "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "versions": [{"status": "affected", "version": "3.4"}, {"lessThan": "3.4", "status": "unaffected", "version": "0", "versionType": "semver"}, {"lessThanOrEqual": "5.10.*", "status": "unaffected", "version": "5.10.265", "versionType": "semver"}, {"lessThanOrEqual": "5.15.*", "status": "unaffected", "version": "5.15.216", "versionType": "semver"}, {"lessThanOrEqual": "6.1.*", "status": "unaffected", "version": "6.1.183", "versionType": "semver"}, {"lessThanOrEqual": "6.6.*", "status": "unaffected", "version": "6.6.151", "versionType": "semver"}, {"lessThanOrEqual": "6.12.*", "status": "unaffected", "version": "6.12.103", "versionType": "semver"}, {"lessThanOrEqual": "6.18.*", "status": "unaffected", "version": "6.18.44", "versionType": "semver"}, {"lessThanOrEqual": "7.1.*", "status": "unaffected", "version": "7.1.8", "versionType": "semver"}, {"lessThanOrEqual": "*", "status": "unaffected", "version": "7.2", "versionType": "original_commit_for_fix"}]}], "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ncan: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error\n\nIn peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc()\nand the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also\nfrees the transfer buffer.\n\nIf usb_submit_urb() fails, the error path frees the buffer explicitly with\nkfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set,\nusb_free_urb() -> urb_destroy() frees the same buffer a second time, a double\nfree of the transfer buffer.\n\n BUG: KASAN: double-free in usb_free_urb.part.0+0x91/0xb0\n Free of addr ffff8881069ccb80 by task trigger.sh/285\n\n Call Trace:\n kfree+0x113/0x3c0\n usb_free_urb.part.0+0x91/0xb0\n\nDrop the redundant kfree(buf); usb_free_urb() already releases the transfer\nbuffer. This mirrors commit 03819abbeb11 (\"net: usb: lan78xx: Fix double free\nissue with interrupt buffer allocation\")."}], "id": "CVE-2026-74456", "lastModified": "2026-10-16T20:17:29.017", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 7.8, "baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 5.9, "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "type": "Secondary"}], "ssvcV203": [{"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "ssvcData": {"id": "CVE-2026-74456", "options": [{"exploitation": "none"}, {"automatable": "no"}, {"technicalImpact": "total"}], "role": "CISA Coordinator", "timestamp": "2026-10-16T18:56:58.741801Z", "version": "2.0.3"}}]}, "published": "2026-08-15T13:17:50.227", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/4bb3325075138dd5346b71589a959878b564dc0b"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/525640b93d3e5f82f4ebea4730f4e0cf799522ba"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/5f2fa5840c34d3a558c57855781be75e03bef752"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/914c3b8fa175acf8476ad31cf04e308638e3578e"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/92d0de80ca2223b9c7da78020155b6cb27824cc0"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/9b3d5a6d952c38bbcf07f903cbeadefdb56b9bc9"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/b9088d581fff971a7eb1628f8dcc30df6cfef4dc"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/dfb17bf04a764462000f11258a7c06aa92d1f261"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Received"}

{"bugzilla": {"description": "kernel: can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error", "id": "2517090", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2517090"}, "csaw": false, "cvss3": {"cvss3_base_score": "7.0", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H", "status": "draft"}, "cwe": "CWE-1341", "details": ["A flaw was found in the Linux kernel's Controller Area Network (CAN) Universal Serial Bus (USB) driver. This vulnerability, a double free, occurs when a USB request block (URB) submission fails, causing the system to attempt to release the same memory twice. This could allow a local attacker to potentially crash the system, leading to a denial of service, or in some scenarios, execute arbitrary code with elevated privileges."], "name": "CVE-2026-74456", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:10", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 10"}, {"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2026-08-15T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2026-74456\nhttps://nvd.nist.gov/vuln/detail/CVE-2026-74456\nhttps://lore.kernel.org/linux-cve-announce/2026081531-CVE-2026-74456-eadc@gregkh/T"], "threat_severity": "Moderate"}

{"affected": [{"configurations": [{"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d,525640b93d3e5f82f4ebea4730f4e0cf799522ba)"}}, {"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d,4bb3325075138dd5346b71589a959878b564dc0b)"}}, {"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d,92d0de80ca2223b9c7da78020155b6cb27824cc0)"}}, {"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d,dfb17bf04a764462000f11258a7c06aa92d1f261)"}}, {"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[bb4785551f64e18b2c8bb15a3bd2b22f5ebf624d,9b3d5a6d952c38bbcf07f903cbeadefdb56b9bc9)"}}], "enrichment": {"confidence": 99.0, "confidence_source": "inferred", "scores": [{"score": 99.0, "source": "inferred"}, {"score": 100.0, "source": "matching"}]}, "original": {"product": "Linux", "source": "cna", "vendor": "Linux"}, "product": "linux_kernel", "vendor": "linux"}, {"configurations": [{"platform": null, "status": "affected", "versions": {"scheme": "semver", "value": "3.4"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "semver", "value": "[0,3.4)"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "generic", "value": "[6.6.151,6.6.*]"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "generic", "value": "[6.12.103,6.12.*]"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "generic", "value": "[6.18.44,6.18.*]"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "generic", "value": "[7.1.8,7.1.*]"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "generic", "value": "[7.2-rc6,*]"}}], "enrichment": {"confidence": 99.0, "confidence_source": "inferred", "scores": [{"score": 99.0, "source": "inferred"}, {"score": 100.0, "source": "matching"}]}, "original": {"product": "Linux", "source": "cna", "vendor": "Linux"}, "product": "linux_kernel", "vendor": "linux"}], "created": "2026-08-15T16:00:07.794455+00:00", "updated": "2026-08-18T04:30:06.700932+00:00", "vendors": ["linux", "linux$PRODUCT$linux_kernel"]}