CVE-2026-19577
Out-of-bounds read in IPv6 route forwarding when the nexthop neighbor has no link-layer address
Published Oct 11, 2026
CVSS 3.1 · 7.1 High
EPSS < 1%
KEV · Not listed
Description
net_route_ipv6_packet() in subsys/net/ip/route_ipv6.c resolved the nexthop's link-layer address with net_nbr_get_lladdr(nbr->idx) without first checking whether the neighbor cache entry actually had a linked link-layer address. An unresolved neighbor carries idx == NET_NBR_LLADDR_UNKNOWN (0xff), and net_nbr_get_lladdr() in subsys/net/ip/nbr.c performs no runtime bounds check beyond a NET_ASSERT, returning &net_neighbor_lladdr[255] — roughly 2.5 KB past the end of an array whose default size is CONFIG_NET_IPV6_MAX_NEIGHBORS (8). Because the returned pointer is never NULL, the following lladdr == NULL guard does not catch it.
The function is reached from ipv6_route_packet() in subsys/net/ip/ipv6.c for every received unicast IPv6 packet whose destination is not a local address on the receiving interface; CONFIG_NET_IPV6_ROUTE is enabled by default whenever the IPv6 neighbor cache is, so no router or forwarding configuration is needed. net_route_ipv6_get_info() returns the packet's destination itself as the nexthop when a neighbor cache entry for it exists, and the cache lookup does not skip INCOMPLETE entries. An unauthenticated attacker on the same link can therefore force the unresolved state — for example by eliciting traffic to a spoofed, non-existent neighbor address so that net_ipv6_send_ns() creates an INCOMPLETE entry, or by sending a Router Advertisement with no source link-layer address option, which creates a persistently unresolved router neighbor — and then send a packet addressed to that neighbor.
The result is an out-of-bounds read at a fixed index past the neighbor link-layer address array. On builds with CONFIG_ASSERT enabled the assertion fires and the device panics, giving a repeatable remote denial of service. With assertions disabled, the stale out-of-bounds struct net_linkaddr drives a memcmp() over an attacker-uninfluenced length and, when its len byte passes the NET_LINK_ADDR_MAX_LENGTH check, up to 8 bytes of unrelated static RAM are copied into the outgoing frame's destination link-layer address and transmitted on the link, disclosing them to any listener. There is no out-of-bounds write and the offset is not attacker-controlled, which bounds the impact.
The function is reached from ipv6_route_packet() in subsys/net/ip/ipv6.c for every received unicast IPv6 packet whose destination is not a local address on the receiving interface; CONFIG_NET_IPV6_ROUTE is enabled by default whenever the IPv6 neighbor cache is, so no router or forwarding configuration is needed. net_route_ipv6_get_info() returns the packet's destination itself as the nexthop when a neighbor cache entry for it exists, and the cache lookup does not skip INCOMPLETE entries. An unauthenticated attacker on the same link can therefore force the unresolved state — for example by eliciting traffic to a spoofed, non-existent neighbor address so that net_ipv6_send_ns() creates an INCOMPLETE entry, or by sending a Router Advertisement with no source link-layer address option, which creates a persistently unresolved router neighbor — and then send a packet addressed to that neighbor.
The result is an out-of-bounds read at a fixed index past the neighbor link-layer address array. On builds with CONFIG_ASSERT enabled the assertion fires and the device panics, giving a repeatable remote denial of service. With assertions disabled, the stale out-of-bounds struct net_linkaddr drives a memcmp() over an attacker-uninfluenced length and, when its len byte passes the NET_LINK_ADDR_MAX_LENGTH check, up to 8 bytes of unrelated static RAM are copied into the outgoing frame's destination link-layer address and transmitted on the link, disclosing them to any listener. There is no out-of-bounds write and the offset is not attacker-controlled, which bounds the impact.
Affected Products
-
CVE record
-
NVD configurations
No data
-
Red Hat packages
No data
-
OpenCVE enrichment
Default status is the baseline for the product, each version can override it (e.g. patched versions marked unaffected).
| Vendor | Product | Default status | Versions | ||||||
|---|---|---|---|---|---|---|---|---|---|
| zephyrproject | zephyr | unaffected |
|
No data.
No data.
| Vendor | Product | Versions | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Zephyrproject | Zephyr |
|
Remediation
Tracking
Advisories
Metrics
No CVSS v4.0
Attack Vector Adjacent Network
Attack Complexity Low
Privileges Required None
Scope Unchanged
Confidentiality Impact Low
Integrity Impact None
Availability Impact High
User Interaction None
No CVSS v3.0
No CVSS v2
This CVE is not in the KEV list.
Exploit prediction score: < 1% (0.217% probability within 30 days)
Exploitation none
Automatable no
Technical Impact partial
References
History
Oct 15, 2026 7:30 PM
Scoring metrics updated
View changes
| Type | Values Removed | Values Added |
|---|---|---|
| Metrics |
ssvc
|
Oct 11, 2026 6:45 PM
First appearance in the feed. Affected vendors updated
View changes
| Type | Values Removed | Values Added |
|---|---|---|
| First Time appeared |
Zephyrproject
Zephyrproject zephyr |
|
| Vendors & Products |
Zephyrproject
Zephyrproject zephyr |
Oct 11, 2026 5:30 PM
Description updated. Title updated. Weaknesses updated. Added references. Scoring metrics updated
View changes
| Type | Values Removed | Values Added |
|---|---|---|
| Description | net_route_ipv6_packet() in subsys/net/ip/route_ipv6.c resolved the nexthop's link-layer address with net_nbr_get_lladdr(nbr->idx) without first checking whether the neighbor cache entry actually had a linked link-layer address. An unresolved neighbor carries idx == NET_NBR_LLADDR_UNKNOWN (0xff), and net_nbr_get_lladdr() in subsys/net/ip/nbr.c performs no runtime bounds check beyond a NET_ASSERT, returning &net_neighbor_lladdr[255] — roughly 2.5 KB past the end of an array whose default size is CONFIG_NET_IPV6_MAX_NEIGHBORS (8). Because the returned pointer is never NULL, the following lladdr == NULL guard does not catch it. The function is reached from ipv6_route_packet() in subsys/net/ip/ipv6.c for every received unicast IPv6 packet whose destination is not a local address on the receiving interface; CONFIG_NET_IPV6_ROUTE is enabled by default whenever the IPv6 neighbor cache is, so no router or forwarding configuration is needed. net_route_ipv6_get_info() returns the packet's destination itself as the nexthop when a neighbor cache entry for it exists, and the cache lookup does not skip INCOMPLETE entries. An unauthenticated attacker on the same link can therefore force the unresolved state — for example by eliciting traffic to a spoofed, non-existent neighbor address so that net_ipv6_send_ns() creates an INCOMPLETE entry, or by sending a Router Advertisement with no source link-layer address option, which creates a persistently unresolved router neighbor — and then send a packet addressed to that neighbor. The result is an out-of-bounds read at a fixed index past the neighbor link-layer address array. On builds with CONFIG_ASSERT enabled the assertion fires and the device panics, giving a repeatable remote denial of service. With assertions disabled, the stale out-of-bounds struct net_linkaddr drives a memcmp() over an attacker-uninfluenced length and, when its len byte passes the NET_LINK_ADDR_MAX_LENGTH check, up to 8 bytes of unrelated static RAM are copied into the outgoing frame's destination link-layer address and transmitted on the link, disclosing them to any listener. There is no out-of-bounds write and the offset is not attacker-controlled, which bounds the impact. | |
| Title | Out-of-bounds read in IPv6 route forwarding when the nexthop neighbor has no link-layer address | |
| Weaknesses | CWE-125 | |
| References |
| |
| Metrics |
cvssV3_1
|
Subscriptions
Weaknesses
