CVE-2026-18415

Out-of-bounds write in the IEEE 802.15.4 L2 transmit path for oversized non-6LoWPAN frames

Published Sep 28, 2026 CVSS 3.1 · 6.3 Medium EPSS < 1% KEV · Not listed
Description
ieee802154_send() in subsys/net/l2/ieee802154/ieee802154.c copies the outgoing packet into a single fixed 125-byte transmit buffer (tx_frame_buf_pool, sized IEEE802154_MTU). In builds with CONFIG_NET_L2_IEEE802154_FRAGMENT enabled (the default whenever CONFIG_NET_6LO is set), the branch taken when 6LoWPAN fragmentation is not required performed an unchecked net_buf_add_mem(frame_buf, pkt_buf->data, pkt_buf->len). The only guard was __ASSERT_NO_MSG() inside net_buf_simple_add(), which is compiled out without CONFIG_ASSERT, so an oversized packet silently overran the frame buffer.

The defect is not reachable from the radio: for NET_AF_INET6 packets ieee802154_6lo_encode_pkt() compares the whole packet length against IEEE802154_MTU and takes the fragmentation path when it does not fit, so every buffer copied on the unfragmented branch is within bounds. It is reachable through NET_AF_PACKET sockets bound to an 802.15.4 interface: for NET_SOCK_RAW the 6LoWPAN block is skipped entirely and for NET_SOCK_DGRAM it returns early on the address-family test, leaving no length validation anywhere on the transmit path (net_context_sendto() and net_if_tx() apply none, and pkt_buffer_length() does not clamp the allocation for this L2).

An application — or, in a CONFIG_USERSPACE build, an unprivileged application thread using the zsock_socket()/zsock_sendto() syscalls — can therefore drive a supervisor-mode out-of-bounds write of chosen bytes past the 125-byte pool buffer. With the default CONFIG_NET_BUF_FIXED_DATA_SIZE of 128 bytes the overrun is bounded to roughly ll_hdr_len + 3 bytes; with CONFIG_NET_BUF_VARIABLE_DATA_SIZE a single storage buffer can be as large as CONFIG_NET_PKT_BUF_TX_DATA_POOL_SIZE, making the overrun far larger. The consequence is corruption of memory adjacent to the pool, with a crash or further compromise of kernel state as the practical impact.

The fix validates ll_hdr_len + net_pkt_get_len(pkt) + authtag_len against IEEE802154_MTU before any copy and adds a tailroom-checking copy_pkt_to_frame() helper that returns -EMSGSIZE instead of overrunning the buffer. The same change also linearizes the whole net_buf chain into one MAC frame, so packet storage boundaries no longer become frame boundaries on the wire.

Remediation

No solution or workaround provided in the CVE record

Tracking

Sign in to view the affected projects.

Advisories

No advisories available
History
Type Values Removed Values Added
CPEs cpe:2.3:o:zephyrproject:zephyr:*:*:*:*:*:*:*:*
Type Values Removed Values Added
Metrics ssvc

{'options': {'Automatable': 'no', 'Exploitation': 'none', 'Technical Impact': 'partial'}, 'version': '2.0.3'}

Type Values Removed Values Added
First Time appeared Zephyrproject
Zephyrproject zephyr
Vendors & Products Zephyrproject
Zephyrproject zephyr
Type Values Removed Values Added
Description ieee802154_send() in subsys/net/l2/ieee802154/ieee802154.c copies the outgoing packet into a single fixed 125-byte transmit buffer (tx_frame_buf_pool, sized IEEE802154_MTU). In builds with CONFIG_NET_L2_IEEE802154_FRAGMENT enabled (the default whenever CONFIG_NET_6LO is set), the branch taken when 6LoWPAN fragmentation is not required performed an unchecked net_buf_add_mem(frame_buf, pkt_buf->data, pkt_buf->len). The only guard was __ASSERT_NO_MSG() inside net_buf_simple_add(), which is compiled out without CONFIG_ASSERT, so an oversized packet silently overran the frame buffer. The defect is not reachable from the radio: for NET_AF_INET6 packets ieee802154_6lo_encode_pkt() compares the whole packet length against IEEE802154_MTU and takes the fragmentation path when it does not fit, so every buffer copied on the unfragmented branch is within bounds. It is reachable through NET_AF_PACKET sockets bound to an 802.15.4 interface: for NET_SOCK_RAW the 6LoWPAN block is skipped entirely and for NET_SOCK_DGRAM it returns early on the address-family test, leaving no length validation anywhere on the transmit path (net_context_sendto() and net_if_tx() apply none, and pkt_buffer_length() does not clamp the allocation for this L2). An application — or, in a CONFIG_USERSPACE build, an unprivileged application thread using the zsock_socket()/zsock_sendto() syscalls — can therefore drive a supervisor-mode out-of-bounds write of chosen bytes past the 125-byte pool buffer. With the default CONFIG_NET_BUF_FIXED_DATA_SIZE of 128 bytes the overrun is bounded to roughly ll_hdr_len + 3 bytes; with CONFIG_NET_BUF_VARIABLE_DATA_SIZE a single storage buffer can be as large as CONFIG_NET_PKT_BUF_TX_DATA_POOL_SIZE, making the overrun far larger. The consequence is corruption of memory adjacent to the pool, with a crash or further compromise of kernel state as the practical impact. The fix validates ll_hdr_len + net_pkt_get_len(pkt) + authtag_len against IEEE802154_MTU before any copy and adds a tailroom-checking copy_pkt_to_frame() helper that returns -EMSGSIZE instead of overrunning the buffer. The same change also linearizes the whole net_buf chain into one MAC frame, so packet storage boundaries no longer become frame boundaries on the wire.
Title Out-of-bounds write in the IEEE 802.15.4 L2 transmit path for oversized non-6LoWPAN frames
Weaknesses CWE-787
References
Metrics cvssV3_1

{'score': 6.3, 'vector': 'CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:H'}

Weaknesses

Sources

Status
PUBLISHED
Assigner
zephyr
Published
Updated
Nov 4, 2026, 5:00 AM
Reserved
Jul 30, 2026, 5:54 PM
Status
Analyzed
Published
Sep 28, 2026, 9:17 PM
Modified
Nov 4, 2026, 5:18 AM