CVE-2025-21867

{"dataType": "CVE_RECORD", "dataVersion": "5.2", "cveMetadata": {"cveId": "CVE-2025-21867", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2024-12-29T08:45:45.781Z", "datePublished": "2025-03-27T13:38:20.673Z", "dateUpdated": "2026-11-10T12:35:22.448Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2026-08-05T11:54:59.299Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nbpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()\n\nKMSAN reported a use-after-free issue in eth_skb_pkt_type()[1]. The\ncause of the issue was that eth_skb_pkt_type() accessed skb's data\nthat didn't contain an Ethernet header. This occurs when\nbpf_prog_test_run_xdp() passes an invalid value as the user_data\nargument to bpf_test_init().\n\nFix this by returning an error when user_data is less than ETH_HLEN in\nbpf_test_init(). Additionally, remove the check for \"if (user_size >\nsize)\" as it is unnecessary.\n\n[1]\nBUG: KMSAN: use-after-free in eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]\nBUG: KMSAN: use-after-free in eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165\n eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]\n eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165\n __xdp_build_skb_from_frame+0x5a8/0xa50 net/core/xdp.c:635\n xdp_recv_frames net/bpf/test_run.c:272 [inline]\n xdp_test_run_batch net/bpf/test_run.c:361 [inline]\n bpf_test_run_xdp_live+0x2954/0x3330 net/bpf/test_run.c:390\n bpf_prog_test_run_xdp+0x148e/0x1b10 net/bpf/test_run.c:1318\n bpf_prog_test_run+0x5b7/0xa30 kernel/bpf/syscall.c:4371\n __sys_bpf+0x6a6/0xe20 kernel/bpf/syscall.c:5777\n __do_sys_bpf kernel/bpf/syscall.c:5866 [inline]\n __se_sys_bpf kernel/bpf/syscall.c:5864 [inline]\n __x64_sys_bpf+0xa4/0xf0 kernel/bpf/syscall.c:5864\n x64_sys_call+0x2ea0/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:322\n do_syscall_x64 arch/x86/entry/common.c:52 [inline]\n do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83\n entry_SYSCALL_64_after_hwframe+0x77/0x7f\n\nUninit was created at:\n free_pages_prepare mm/page_alloc.c:1056 [inline]\n free_unref_page+0x156/0x1320 mm/page_alloc.c:2657\n __free_pages+0xa3/0x1b0 mm/page_alloc.c:4838\n bpf_ringbuf_free kernel/bpf/ringbuf.c:226 [inline]\n ringbuf_map_free+0xff/0x1e0 kernel/bpf/ringbuf.c:235\n bpf_map_free kernel/bpf/syscall.c:838 [inline]\n bpf_map_free_deferred+0x17c/0x310 kernel/bpf/syscall.c:862\n process_one_work kernel/workqueue.c:3229 [inline]\n process_scheduled_works+0xa2b/0x1b60 kernel/workqueue.c:3310\n worker_thread+0xedf/0x1550 kernel/workqueue.c:3391\n kthread+0x535/0x6b0 kernel/kthread.c:389\n ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147\n ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244\n\nCPU: 1 UID: 0 PID: 17276 Comm: syz.1.16450 Not tainted 6.12.0-05490-g9bb88c659673 #8\nHardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014"}], "metrics": [{"cvssV3_1": {"version": "3.1", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "baseScore": 7.8, "baseSeverity": "HIGH"}, "scenarios": [{"lang": "en", "value": "AV:L - The vulnerability is triggered through the local `bpf(BPF_PROG_TEST_RUN)` syscall with `BPF_F_TEST_XDP_LIVE_FRAMES` and a short `data_size_in`; no network input reaches this code. Per kernel scoring guidance, BPF syscall-reachable bugs are Local.\nAC:L - The attacker fully controls `data_size_in`, `batch_size`, `repeat` and the XDP program, so the out-of-range read is triggered deterministically on every invocation with no race to win. Page-pool pages are freshly allocated non-zeroed pages, and the attacker can groom which freed pages get recycled by freeing chosen content immediately beforehand.\nPR:L - `bpf_prog_test_run()` performs no capability check whatsoever \u2014 the only gate is possession of an XDP program fd, which an unprivileged process can obtain via a delegated BPF token (`bpf_token_capable()` falls back to `ns_capable(token->userns, ...)`) or a bpffs pin, since `bpf_obj_do_get()` checks only file permissions. Loading a fresh XDP program needs CAP_BPF+CAP_NET_ADMIN, but that is a container/namespace-level privilege rather than real init-namespace root, so Low is the appropriate and higher-severity choice.\nUI:N - The attacker performs the entire sequence itself via the `bpf()` syscall; no victim action, mount, or file open is needed. The XDP frames are looped straight back into the local receive path by the test-run machinery.\nS:U - The stale-memory read, the disclosed data, and the resulting malformed skb all remain within the kernel's own security authority. No hypervisor, IOMMU, or sandbox boundary is crossed.\nC:H - `eth_skb_pkt_type()`/`eth_type_trans()` read the contents of a previously-freed page, and the derived `skb->protocol` and `skb->pkt_type` are directly readable by an `AF_PACKET` observer on loopback, giving a repeatable, unbounded oracle over recycled kernel memory that may contain pointers, keys, or user data. Per guidance, use-after-free reads of freed memory are scored High.\nI:H - Contents of freed memory \u2014 which the attacker can influence through heap grooming \u2014 become the Ethernet header that determines `skb->protocol` and `skb->pkt_type` for a frame injected into the local network stack via `netif_receive_skb_list()`, corrupting packet classification and delivery. Per guidance, use-after-free conditions are scored High for integrity.\nA:H - The kernel dereferences memory beyond the initialized frame and hands a geometrically invalid skb (`skb->len < ETH_HLEN`, `mac_header == network_header`, `mac_len == 0`) to protocol handlers that assume `eth_type_trans()` pulled the header, and on hardened/KASAN/KMSAN builds the freed-page access itself is a fatal memory-error report. Per guidance, any use-after-free is scored High for availability."}]}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["net/bpf/test_run.c"], "versions": [{"version": "be3d72a2896cb24090f268dce4aa8a304d40bc23", "lessThan": "f615fccfc689cb48977d275ac2e391297b52392b", "status": "affected", "versionType": "git"}, {"version": "be3d72a2896cb24090f268dce4aa8a304d40bc23", "lessThan": "d56d8a23d95100b65f40438639dd82db2af81c11", "status": "affected", "versionType": "git"}, {"version": "be3d72a2896cb24090f268dce4aa8a304d40bc23", "lessThan": "972bafed67ca73ad9a56448384281eb5fd5c0ba3", "status": "affected", "versionType": "git"}, {"version": "be3d72a2896cb24090f268dce4aa8a304d40bc23", "lessThan": "1a9e1284e87d59b1303b69d1808d310821d6e5f7", "status": "affected", "versionType": "git"}, {"version": "be3d72a2896cb24090f268dce4aa8a304d40bc23", "lessThan": "6b3d638ca897e099fa99bd6d02189d3176f80a47", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["net/bpf/test_run.c"], "versions": [{"version": "5.18", "status": "affected"}, {"version": "0", "lessThan": "5.18", "status": "unaffected", "versionType": "semver"}, {"version": "6.1.130", "lessThanOrEqual": "6.1.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.6.80", "lessThanOrEqual": "6.6.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.12.17", "lessThanOrEqual": "6.12.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.13.5", "lessThanOrEqual": "6.13.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.14", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.18", "versionEndExcluding": "6.1.130"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.18", "versionEndExcluding": "6.6.80"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.18", "versionEndExcluding": "6.12.17"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.18", "versionEndExcluding": "6.13.5"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.18", "versionEndExcluding": "6.14"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/f615fccfc689cb48977d275ac2e391297b52392b"}, {"url": "https://git.kernel.org/stable/c/d56d8a23d95100b65f40438639dd82db2af81c11"}, {"url": "https://git.kernel.org/stable/c/972bafed67ca73ad9a56448384281eb5fd5c0ba3"}, {"url": "https://git.kernel.org/stable/c/1a9e1284e87d59b1303b69d1808d310821d6e5f7"}, {"url": "https://git.kernel.org/stable/c/6b3d638ca897e099fa99bd6d02189d3176f80a47"}], "title": "bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()", "x_generator": {"engine": "bippy-1.2.0"}}, "adp": [{"metrics": [{"cvssV3_1": {"scope": "UNCHANGED", "version": "3.1", "baseScore": 7.8, "attackVector": "LOCAL", "baseSeverity": "HIGH", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "integrityImpact": "HIGH", "userInteraction": "NONE", "attackComplexity": "LOW", "availabilityImpact": "HIGH", "privilegesRequired": "LOW", "confidentialityImpact": "HIGH"}}, {"other": {"type": "ssvc", "content": {"id": "CVE-2025-21867", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "total"}], "version": "2.0.3", "timestamp": "2025-03-28T17:27:05.715395Z"}}}], "problemTypes": [{"descriptions": [{"lang": "en", "type": "CWE", "cweId": "CWE-416", "description": "CWE-416 Use After Free"}]}], "title": "CISA ADP Vulnrichment", "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2025-03-28T17:32:23.044Z"}}, {"title": "CVE Program Container", "references": [{"url": "https://lists.debian.org/debian-lts-announce/2025/05/msg00045.html"}], "providerMetadata": {"orgId": "af854a3a-2127-422b-91ae-364da2661108", "shortName": "CVE", "dateUpdated": "2025-11-03T19:38:24.764Z"}}, {"x_adpType": "supplier", "providerMetadata": {"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e", "shortName": "siemens-SADP", "dateUpdated": "2026-11-10T12:35:22.448Z"}, "affected": [{"vendor": "Siemens", "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)", "versions": [{"status": "affected", "version": "V3.1.6", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}, {"vendor": "Siemens", "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)", "versions": [{"status": "affected", "version": "V3.1.7", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}, {"vendor": "Siemens", "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)", "versions": [{"status": "affected", "version": "V3.1.6", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}, {"vendor": "Siemens", "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)", "versions": [{"status": "affected", "version": "V3.1.7", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}, {"vendor": "Siemens", "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)", "versions": [{"status": "affected", "version": "V3.1.6", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}, {"vendor": "Siemens", "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)", "versions": [{"status": "affected", "version": "V3.1.7", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}, {"vendor": "Siemens", "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)", "versions": [{"status": "affected", "version": "V3.1.6", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}, {"vendor": "Siemens", "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)", "versions": [{"status": "affected", "version": "V3.1.7", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}, {"vendor": "Siemens", "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)", "versions": [{"status": "affected", "version": "V3.1.6", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}, {"vendor": "Siemens", "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)", "versions": [{"status": "affected", "version": "V3.1.7", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}], "references": [{"url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"}, {"url": "https://cert-portal.siemens.com/productcert/html/ssa-457936.html"}]}]}}

{"dataType": "CVE_RECORD", "containers": {"adp": [{"title": "CVE Program Container", "references": [{"url": "https://lists.debian.org/debian-lts-announce/2025/05/msg00045.html"}], "providerMetadata": {"orgId": "af854a3a-2127-422b-91ae-364da2661108", "shortName": "CVE", "dateUpdated": "2025-11-03T19:38:24.764Z"}}, {"affected": [{"vendor": "Siemens", "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)", "versions": [{"status": "affected", "version": "V3.1.6", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}, {"vendor": "Siemens", "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)", "versions": [{"status": "affected", "version": "V3.1.7", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}, {"vendor": "Siemens", "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)", "versions": [{"status": "affected", "version": "V3.1.6", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}, {"vendor": "Siemens", "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)", "versions": [{"status": "affected", "version": "V3.1.7", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}, {"vendor": "Siemens", "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)", "versions": [{"status": "affected", "version": "V3.1.6", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}, {"vendor": "Siemens", "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)", "versions": [{"status": "affected", "version": "V3.1.7", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}, {"vendor": "Siemens", "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)", "versions": [{"status": "affected", "version": "V3.1.6", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}, {"vendor": "Siemens", "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)", "versions": [{"status": "affected", "version": "V3.1.7", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}, {"vendor": "Siemens", "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)", "versions": [{"status": "affected", "version": "V3.1.6", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}, {"vendor": "Siemens", "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)", "versions": [{"status": "affected", "version": "V3.1.7", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}], "x_adpType": "supplier", "references": [{"url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"}, {"url": "https://cert-portal.siemens.com/productcert/html/ssa-457936.html"}], "providerMetadata": {"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e", "shortName": "siemens-SADP", "dateUpdated": "2026-11-10T12:35:22.448Z"}}, {"title": "CISA ADP Vulnrichment", "metrics": [{"cvssV3_1": {"scope": "UNCHANGED", "version": "3.1", "baseScore": 7.8, "attackVector": "LOCAL", "baseSeverity": "HIGH", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "integrityImpact": "HIGH", "userInteraction": "NONE", "attackComplexity": "LOW", "availabilityImpact": "HIGH", "privilegesRequired": "LOW", "confidentialityImpact": "HIGH"}}, {"other": {"type": "ssvc", "content": {"id": "CVE-2025-21867", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "total"}], "version": "2.0.3", "timestamp": "2025-03-28T17:27:05.715395Z"}}}], "problemTypes": [{"descriptions": [{"lang": "en", "type": "CWE", "cweId": "CWE-416", "description": "CWE-416 Use After Free"}]}], "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2025-03-28T17:27:07.063Z"}}], "cna": {"title": "bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()", "metrics": [{"cvssV3_1": {"version": "3.1", "baseScore": 7.8, "baseSeverity": "HIGH", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"}, "scenarios": [{"lang": "en", "value": "AV:L - The vulnerability is triggered through the local `bpf(BPF_PROG_TEST_RUN)` syscall with `BPF_F_TEST_XDP_LIVE_FRAMES` and a short `data_size_in`; no network input reaches this code. Per kernel scoring guidance, BPF syscall-reachable bugs are Local.\nAC:L - The attacker fully controls `data_size_in`, `batch_size`, `repeat` and the XDP program, so the out-of-range read is triggered deterministically on every invocation with no race to win. Page-pool pages are freshly allocated non-zeroed pages, and the attacker can groom which freed pages get recycled by freeing chosen content immediately beforehand.\nPR:L - `bpf_prog_test_run()` performs no capability check whatsoever \u2014 the only gate is possession of an XDP program fd, which an unprivileged process can obtain via a delegated BPF token (`bpf_token_capable()` falls back to `ns_capable(token->userns, ...)`) or a bpffs pin, since `bpf_obj_do_get()` checks only file permissions. Loading a fresh XDP program needs CAP_BPF+CAP_NET_ADMIN, but that is a container/namespace-level privilege rather than real init-namespace root, so Low is the appropriate and higher-severity choice.\nUI:N - The attacker performs the entire sequence itself via the `bpf()` syscall; no victim action, mount, or file open is needed. The XDP frames are looped straight back into the local receive path by the test-run machinery.\nS:U - The stale-memory read, the disclosed data, and the resulting malformed skb all remain within the kernel's own security authority. No hypervisor, IOMMU, or sandbox boundary is crossed.\nC:H - `eth_skb_pkt_type()`/`eth_type_trans()` read the contents of a previously-freed page, and the derived `skb->protocol` and `skb->pkt_type` are directly readable by an `AF_PACKET` observer on loopback, giving a repeatable, unbounded oracle over recycled kernel memory that may contain pointers, keys, or user data. Per guidance, use-after-free reads of freed memory are scored High.\nI:H - Contents of freed memory \u2014 which the attacker can influence through heap grooming \u2014 become the Ethernet header that determines `skb->protocol` and `skb->pkt_type` for a frame injected into the local network stack via `netif_receive_skb_list()`, corrupting packet classification and delivery. Per guidance, use-after-free conditions are scored High for integrity.\nA:H - The kernel dereferences memory beyond the initialized frame and hands a geometrically invalid skb (`skb->len < ETH_HLEN`, `mac_header == network_header`, `mac_len == 0`) to protocol handlers that assume `eth_type_trans()` pulled the header, and on hardened/KASAN/KMSAN builds the freed-page access itself is a fatal memory-error report. Per guidance, any use-after-free is scored High for availability."}]}], "affected": [{"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "be3d72a2896cb24090f268dce4aa8a304d40bc23", "lessThan": "f615fccfc689cb48977d275ac2e391297b52392b", "versionType": "git"}, {"status": "affected", "version": "be3d72a2896cb24090f268dce4aa8a304d40bc23", "lessThan": "d56d8a23d95100b65f40438639dd82db2af81c11", "versionType": "git"}, {"status": "affected", "version": "be3d72a2896cb24090f268dce4aa8a304d40bc23", "lessThan": "972bafed67ca73ad9a56448384281eb5fd5c0ba3", "versionType": "git"}, {"status": "affected", "version": "be3d72a2896cb24090f268dce4aa8a304d40bc23", "lessThan": "1a9e1284e87d59b1303b69d1808d310821d6e5f7", "versionType": "git"}, {"status": "affected", "version": "be3d72a2896cb24090f268dce4aa8a304d40bc23", "lessThan": "6b3d638ca897e099fa99bd6d02189d3176f80a47", "versionType": "git"}], "programFiles": ["net/bpf/test_run.c"], "defaultStatus": "unaffected"}, {"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "5.18"}, {"status": "unaffected", "version": "0", "lessThan": "5.18", "versionType": "semver"}, {"status": "unaffected", "version": "6.1.130", "versionType": "semver", "lessThanOrEqual": "6.1.*"}, {"status": "unaffected", "version": "6.6.80", "versionType": "semver", "lessThanOrEqual": "6.6.*"}, {"status": "unaffected", "version": "6.12.17", "versionType": "semver", "lessThanOrEqual": "6.12.*"}, {"status": "unaffected", "version": "6.13.5", "versionType": "semver", "lessThanOrEqual": "6.13.*"}, {"status": "unaffected", "version": "6.14", "versionType": "original_commit_for_fix", "lessThanOrEqual": "*"}], "programFiles": ["net/bpf/test_run.c"], "defaultStatus": "affected"}], "references": [{"url": "https://git.kernel.org/stable/c/f615fccfc689cb48977d275ac2e391297b52392b"}, {"url": "https://git.kernel.org/stable/c/d56d8a23d95100b65f40438639dd82db2af81c11"}, {"url": "https://git.kernel.org/stable/c/972bafed67ca73ad9a56448384281eb5fd5c0ba3"}, {"url": "https://git.kernel.org/stable/c/1a9e1284e87d59b1303b69d1808d310821d6e5f7"}, {"url": "https://git.kernel.org/stable/c/6b3d638ca897e099fa99bd6d02189d3176f80a47"}], "x_generator": {"engine": "bippy-1.2.0"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nbpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()\n\nKMSAN reported a use-after-free issue in eth_skb_pkt_type()[1]. The\ncause of the issue was that eth_skb_pkt_type() accessed skb's data\nthat didn't contain an Ethernet header. This occurs when\nbpf_prog_test_run_xdp() passes an invalid value as the user_data\nargument to bpf_test_init().\n\nFix this by returning an error when user_data is less than ETH_HLEN in\nbpf_test_init(). Additionally, remove the check for \"if (user_size >\nsize)\" as it is unnecessary.\n\n[1]\nBUG: KMSAN: use-after-free in eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]\nBUG: KMSAN: use-after-free in eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165\n eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]\n eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165\n __xdp_build_skb_from_frame+0x5a8/0xa50 net/core/xdp.c:635\n xdp_recv_frames net/bpf/test_run.c:272 [inline]\n xdp_test_run_batch net/bpf/test_run.c:361 [inline]\n bpf_test_run_xdp_live+0x2954/0x3330 net/bpf/test_run.c:390\n bpf_prog_test_run_xdp+0x148e/0x1b10 net/bpf/test_run.c:1318\n bpf_prog_test_run+0x5b7/0xa30 kernel/bpf/syscall.c:4371\n __sys_bpf+0x6a6/0xe20 kernel/bpf/syscall.c:5777\n __do_sys_bpf kernel/bpf/syscall.c:5866 [inline]\n __se_sys_bpf kernel/bpf/syscall.c:5864 [inline]\n __x64_sys_bpf+0xa4/0xf0 kernel/bpf/syscall.c:5864\n x64_sys_call+0x2ea0/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:322\n do_syscall_x64 arch/x86/entry/common.c:52 [inline]\n do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83\n entry_SYSCALL_64_after_hwframe+0x77/0x7f\n\nUninit was created at:\n free_pages_prepare mm/page_alloc.c:1056 [inline]\n free_unref_page+0x156/0x1320 mm/page_alloc.c:2657\n __free_pages+0xa3/0x1b0 mm/page_alloc.c:4838\n bpf_ringbuf_free kernel/bpf/ringbuf.c:226 [inline]\n ringbuf_map_free+0xff/0x1e0 kernel/bpf/ringbuf.c:235\n bpf_map_free kernel/bpf/syscall.c:838 [inline]\n bpf_map_free_deferred+0x17c/0x310 kernel/bpf/syscall.c:862\n process_one_work kernel/workqueue.c:3229 [inline]\n process_scheduled_works+0xa2b/0x1b60 kernel/workqueue.c:3310\n worker_thread+0xedf/0x1550 kernel/workqueue.c:3391\n kthread+0x535/0x6b0 kernel/kthread.c:389\n ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147\n ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244\n\nCPU: 1 UID: 0 PID: 17276 Comm: syz.1.16450 Not tainted 6.12.0-05490-g9bb88c659673 #8\nHardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014"}], "cpeApplicability": [{"nodes": [{"negate": false, "cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.1.130", "versionStartIncluding": "5.18"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.6.80", "versionStartIncluding": "5.18"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.12.17", "versionStartIncluding": "5.18"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.13.5", "versionStartIncluding": "5.18"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.14", "versionStartIncluding": "5.18"}], "operator": "OR"}]}], "providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2026-08-05T11:54:59.299Z"}}}, "cveMetadata": {"cveId": "CVE-2025-21867", "state": "PUBLISHED", "dateUpdated": "2026-11-10T12:35:22.448Z", "dateReserved": "2024-12-29T08:45:45.781Z", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "datePublished": "2025-03-27T13:38:20.673Z", "assignerShortName": "Linux"}, "dataVersion": "5.2"}

{"affected": [{"affectedData": [{"defaultStatus": "unaffected", "product": "Linux", "programFiles": ["net/bpf/test_run.c"], "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "versions": [{"lessThan": "f615fccfc689cb48977d275ac2e391297b52392b", "status": "affected", "version": "be3d72a2896cb24090f268dce4aa8a304d40bc23", "versionType": "git"}, {"lessThan": "d56d8a23d95100b65f40438639dd82db2af81c11", "status": "affected", "version": "be3d72a2896cb24090f268dce4aa8a304d40bc23", "versionType": "git"}, {"lessThan": "972bafed67ca73ad9a56448384281eb5fd5c0ba3", "status": "affected", "version": "be3d72a2896cb24090f268dce4aa8a304d40bc23", "versionType": "git"}, {"lessThan": "1a9e1284e87d59b1303b69d1808d310821d6e5f7", "status": "affected", "version": "be3d72a2896cb24090f268dce4aa8a304d40bc23", "versionType": "git"}, {"lessThan": "6b3d638ca897e099fa99bd6d02189d3176f80a47", "status": "affected", "version": "be3d72a2896cb24090f268dce4aa8a304d40bc23", "versionType": "git"}]}, {"defaultStatus": "affected", "product": "Linux", "programFiles": ["net/bpf/test_run.c"], "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "versions": [{"status": "affected", "version": "5.18"}, {"lessThan": "5.18", "status": "unaffected", "version": "0", "versionType": "semver"}, {"lessThanOrEqual": "6.1.*", "status": "unaffected", "version": "6.1.130", "versionType": "semver"}, {"lessThanOrEqual": "6.6.*", "status": "unaffected", "version": "6.6.80", "versionType": "semver"}, {"lessThanOrEqual": "6.12.*", "status": "unaffected", "version": "6.12.17", "versionType": "semver"}, {"lessThanOrEqual": "6.13.*", "status": "unaffected", "version": "6.13.5", "versionType": "semver"}, {"lessThanOrEqual": "*", "status": "unaffected", "version": "6.14", "versionType": "original_commit_for_fix"}]}], "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"}, {"affectedData": [{"defaultStatus": "unknown", "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)", "vendor": "Siemens", "versions": [{"lessThan": "*", "status": "affected", "version": "V3.1.6", "versionType": "custom"}]}, {"defaultStatus": "unknown", "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)", "vendor": "Siemens", "versions": [{"lessThan": "*", "status": "affected", "version": "V3.1.7", "versionType": "custom"}]}, {"defaultStatus": "unknown", "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)", "vendor": "Siemens", "versions": [{"lessThan": "*", "status": "affected", "version": "V3.1.6", "versionType": "custom"}]}, {"defaultStatus": "unknown", "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)", "vendor": "Siemens", "versions": [{"lessThan": "*", "status": "affected", "version": "V3.1.7", "versionType": "custom"}]}, {"defaultStatus": "unknown", "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)", "vendor": "Siemens", "versions": [{"lessThan": "*", "status": "affected", "version": "V3.1.6", "versionType": "custom"}]}, {"defaultStatus": "unknown", "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)", "vendor": "Siemens", "versions": [{"lessThan": "*", "status": "affected", "version": "V3.1.7", "versionType": "custom"}]}, {"defaultStatus": "unknown", "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)", "vendor": "Siemens", "versions": [{"lessThan": "*", "status": "affected", "version": "V3.1.6", "versionType": "custom"}]}, {"defaultStatus": "unknown", "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)", "vendor": "Siemens", "versions": [{"lessThan": "*", "status": "affected", "version": "V3.1.7", "versionType": "custom"}]}, {"defaultStatus": "unknown", "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)", "vendor": "Siemens", "versions": [{"lessThan": "*", "status": "affected", "version": "V3.1.6", "versionType": "custom"}]}, {"defaultStatus": "unknown", "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)", "vendor": "Siemens", "versions": [{"lessThan": "*", "status": "affected", "version": "V3.1.7", "versionType": "custom"}]}], "source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e"}], "configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "0CBE8AE0-BB0A-4BC3-85D8-ED647510B2CD", "versionEndExcluding": "6.1.130", "versionStartIncluding": "5.18", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "A93F3655-6FAF-43B0-8541-A212998F05B8", "versionEndExcluding": "6.6.80", "versionStartIncluding": "6.2", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "15370AEE-6D1C-49C3-8CB7-E889D5F92B6F", "versionEndExcluding": "6.12.17", "versionStartIncluding": "6.7", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "72E69ABB-9015-43A6-87E1-5150383CFFD9", "versionEndExcluding": "6.13.5", "versionStartIncluding": "6.13", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.14:rc1:*:*:*:*:*:*", "matchCriteriaId": "186716B6-2B66-4BD0-852E-D48E71C0C85F", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.14:rc2:*:*:*:*:*:*", "matchCriteriaId": "0D3E781C-403A-498F-9DA9-ECEE50F41E75", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.14:rc3:*:*:*:*:*:*", "matchCriteriaId": "66619FB8-0AAF-4166-B2CF-67B24143261D", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nbpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()\n\nKMSAN reported a use-after-free issue in eth_skb_pkt_type()[1]. The\ncause of the issue was that eth_skb_pkt_type() accessed skb's data\nthat didn't contain an Ethernet header. This occurs when\nbpf_prog_test_run_xdp() passes an invalid value as the user_data\nargument to bpf_test_init().\n\nFix this by returning an error when user_data is less than ETH_HLEN in\nbpf_test_init(). Additionally, remove the check for \"if (user_size >\nsize)\" as it is unnecessary.\n\n[1]\nBUG: KMSAN: use-after-free in eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]\nBUG: KMSAN: use-after-free in eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165\n eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]\n eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165\n __xdp_build_skb_from_frame+0x5a8/0xa50 net/core/xdp.c:635\n xdp_recv_frames net/bpf/test_run.c:272 [inline]\n xdp_test_run_batch net/bpf/test_run.c:361 [inline]\n bpf_test_run_xdp_live+0x2954/0x3330 net/bpf/test_run.c:390\n bpf_prog_test_run_xdp+0x148e/0x1b10 net/bpf/test_run.c:1318\n bpf_prog_test_run+0x5b7/0xa30 kernel/bpf/syscall.c:4371\n __sys_bpf+0x6a6/0xe20 kernel/bpf/syscall.c:5777\n __do_sys_bpf kernel/bpf/syscall.c:5866 [inline]\n __se_sys_bpf kernel/bpf/syscall.c:5864 [inline]\n __x64_sys_bpf+0xa4/0xf0 kernel/bpf/syscall.c:5864\n x64_sys_call+0x2ea0/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:322\n do_syscall_x64 arch/x86/entry/common.c:52 [inline]\n do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83\n entry_SYSCALL_64_after_hwframe+0x77/0x7f\n\nUninit was created at:\n free_pages_prepare mm/page_alloc.c:1056 [inline]\n free_unref_page+0x156/0x1320 mm/page_alloc.c:2657\n __free_pages+0xa3/0x1b0 mm/page_alloc.c:4838\n bpf_ringbuf_free kernel/bpf/ringbuf.c:226 [inline]\n ringbuf_map_free+0xff/0x1e0 kernel/bpf/ringbuf.c:235\n bpf_map_free kernel/bpf/syscall.c:838 [inline]\n bpf_map_free_deferred+0x17c/0x310 kernel/bpf/syscall.c:862\n process_one_work kernel/workqueue.c:3229 [inline]\n process_scheduled_works+0xa2b/0x1b60 kernel/workqueue.c:3310\n worker_thread+0xedf/0x1550 kernel/workqueue.c:3391\n kthread+0x535/0x6b0 kernel/kthread.c:389\n ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147\n ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244\n\nCPU: 1 UID: 0 PID: 17276 Comm: syz.1.16450 Not tainted 6.12.0-05490-g9bb88c659673 #8\nHardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014"}, {"lang": "es", "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: bpf, test_run: Se solucion\u00f3 el problema de use-after-free en eth_skb_pkt_type(). KMSAN report\u00f3 un problema de use-after-free en eth_skb_pkt_type()[1]. La causa del problema era que eth_skb_pkt_type() acced\u00eda a datos de skb que no conten\u00edan un encabezado Ethernet. Esto ocurre cuando bpf_prog_test_run_xdp() pasa un valor no v\u00e1lido como argumento user_data a bpf_test_init(). Se soluciona devolviendo un error cuando user_data sea menor que ETH_HLEN en bpf_test_init(). Adem\u00e1s, se ha eliminado la comprobaci\u00f3n de \"if (user_size &gt; size)\", ya que no es necesaria. [1] ERROR: KMSAN: use-after-free en eth_skb_pkt_type include/linux/etherdevice.h:627 [en l\u00ednea] ERROR: KMSAN: use-after-free en eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165 eth_skb_pkt_type include/linux/etherdevice.h:627 [en l\u00ednea] eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165 __xdp_build_skb_from_frame+0x5a8/0xa50 net/core/xdp.c:635 xdp_recv_frames net/bpf/test_run.c:272 [en l\u00ednea] xdp_test_run_batch net/bpf/test_run.c:361 [en l\u00ednea] bpf_test_run_xdp_live+0x2954/0x3330 net/bpf/test_run.c:390 bpf_prog_test_run_xdp+0x148e/0x1b10 net/bpf/test_run.c:1318 bpf_prog_test_run+0x5b7/0xa30 kernel/bpf/syscall.c:4371 __sys_bpf+0x6a6/0xe20 kernel/bpf/syscall.c:5777 __do_sys_bpf kernel/bpf/syscall.c:5866 [en l\u00ednea] __se_sys_bpf kernel/bpf/syscall.c:5864 [en l\u00ednea] __x64_sys_bpf+0xa4/0xf0 kernel/bpf/syscall.c:5864 x64_sys_call+0x2ea0/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [en l\u00ednea] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit se cre\u00f3 en: free_pages_prepare mm/page_alloc.c:1056 [en l\u00ednea] free_unref_page+0x156/0x1320 mm/page_alloc.c:2657 __free_pages+0xa3/0x1b0 mm/page_alloc.c:4838 bpf_ringbuf_free kernel/bpf/ringbuf.c:226 [en l\u00ednea] ringbuf_map_free+0xff/0x1e0 kernel/bpf/ringbuf.c:235 bpf_map_free kernel/bpf/syscall.c:838 [en l\u00ednea] bpf_map_free_deferred+0x17c/0x310 kernel/bpf/syscall.c:862 proceso_un_trabajo kernel/workqueue.c:3229 [en l\u00ednea] proceso_scheduled_works+0xa2b/0x1b60 kernel/workqueue.c:3310 subproceso_trabajador+0xedf/0x1550 kernel/workqueue.c:3391 kthread+0x535/0x6b0 kernel/kthread.c:389 ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 CPU: 1 UID: 0 PID: 17276 Comm: syz.1.16450 No contaminado 6.12.0-05490-g9bb88c659673 #8 Nombre del hardware: PC est\u00e1ndar QEMU (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 01/04/2014"}], "id": "CVE-2025-21867", "lastModified": "2026-11-10T13:17:38.043", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 7.8, "baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 5.9, "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "type": "Secondary"}, {"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 7.8, "baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 5.9, "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "type": "Secondary"}], "ssvcV203": [{"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "ssvcData": {"id": "CVE-2025-21867", "options": [{"exploitation": "none"}, {"automatable": "no"}, {"technicalImpact": "total"}], "role": "CISA Coordinator", "timestamp": "2025-03-28T17:27:05.715395Z", "version": "2.0.3"}}]}, "published": "2025-03-27T14:15:47.750", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/1a9e1284e87d59b1303b69d1808d310821d6e5f7"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/6b3d638ca897e099fa99bd6d02189d3176f80a47"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/972bafed67ca73ad9a56448384281eb5fd5c0ba3"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/d56d8a23d95100b65f40438639dd82db2af81c11"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/f615fccfc689cb48977d275ac2e391297b52392b"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://lists.debian.org/debian-lts-announce/2025/05/msg00045.html"}, {"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e", "url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"}, {"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e", "url": "https://cert-portal.siemens.com/productcert/html/ssa-457936.html"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Modified", "weaknesses": [{"description": [{"lang": "en", "value": "CWE-416"}], "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "type": "Secondary"}]}

{"affected_release": [{"advisory": "RHSA-2023:2458", "cpe": "cpe:/a:redhat:enterprise_linux:9", "package": "kernel-0:5.14.0-284.11.1.el9_2", "product_name": "Red Hat Enterprise Linux 9", "release_date": "2023-05-09T00:00:00Z"}, {"advisory": "RHSA-2023:2458", "cpe": "cpe:/o:redhat:enterprise_linux:9", "package": "kernel-0:5.14.0-284.11.1.el9_2", "product_name": "Red Hat Enterprise Linux 9", "release_date": "2023-05-09T00:00:00Z"}], "bugzilla": {"description": "kernel: bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()", "id": "2355334", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2355334"}, "csaw": false, "cvss3": {"cvss3_base_score": "7.0", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H", "status": "verified"}, "cwe": "CWE-416", "details": ["In the Linux kernel, the following vulnerability has been resolved:\nbpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()\nKMSAN reported a use-after-free issue in eth_skb_pkt_type()[1]. The\ncause of the issue was that eth_skb_pkt_type() accessed skb's data\nthat didn't contain an Ethernet header. This occurs when\nbpf_prog_test_run_xdp() passes an invalid value as the user_data\nargument to bpf_test_init().\nFix this by returning an error when user_data is less than ETH_HLEN in\nbpf_test_init(). Additionally, remove the check for \"if (user_size >\nsize)\" as it is unnecessary.\n[1]\nBUG: KMSAN: use-after-free in eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]\nBUG: KMSAN: use-after-free in eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165\neth_skb_pkt_type include/linux/etherdevice.h:627 [inline]\neth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165\n__xdp_build_skb_from_frame+0x5a8/0xa50 net/core/xdp.c:635\nxdp_recv_frames net/bpf/test_run.c:272 [inline]\nxdp_test_run_batch net/bpf/test_run.c:361 [inline]\nbpf_test_run_xdp_live+0x2954/0x3330 net/bpf/test_run.c:390\nbpf_prog_test_run_xdp+0x148e/0x1b10 net/bpf/test_run.c:1318\nbpf_prog_test_run+0x5b7/0xa30 kernel/bpf/syscall.c:4371\n__sys_bpf+0x6a6/0xe20 kernel/bpf/syscall.c:5777\n__do_sys_bpf kernel/bpf/syscall.c:5866 [inline]\n__se_sys_bpf kernel/bpf/syscall.c:5864 [inline]\n__x64_sys_bpf+0xa4/0xf0 kernel/bpf/syscall.c:5864\nx64_sys_call+0x2ea0/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:322\ndo_syscall_x64 arch/x86/entry/common.c:52 [inline]\ndo_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83\nentry_SYSCALL_64_after_hwframe+0x77/0x7f\nUninit was created at:\nfree_pages_prepare mm/page_alloc.c:1056 [inline]\nfree_unref_page+0x156/0x1320 mm/page_alloc.c:2657\n__free_pages+0xa3/0x1b0 mm/page_alloc.c:4838\nbpf_ringbuf_free kernel/bpf/ringbuf.c:226 [inline]\nringbuf_map_free+0xff/0x1e0 kernel/bpf/ringbuf.c:235\nbpf_map_free kernel/bpf/syscall.c:838 [inline]\nbpf_map_free_deferred+0x17c/0x310 kernel/bpf/syscall.c:862\nprocess_one_work kernel/workqueue.c:3229 [inline]\nprocess_scheduled_works+0xa2b/0x1b60 kernel/workqueue.c:3310\nworker_thread+0xedf/0x1550 kernel/workqueue.c:3391\nkthread+0x535/0x6b0 kernel/kthread.c:389\nret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147\nret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244\nCPU: 1 UID: 0 PID: 17276 Comm: syz.1.16450 Not tainted 6.12.0-05490-g9bb88c659673 #8\nHardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014"], "name": "CVE-2025-21867", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:10", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 10"}, {"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2025-03-27T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2025-21867\nhttps://nvd.nist.gov/vuln/detail/CVE-2025-21867\nhttps://lore.kernel.org/linux-cve-announce/2025032732-CVE-2025-21867-3138@gregkh/T"], "threat_severity": "Moderate"}

{}