BACnet Stack: malicious ReadPropertyMultiple-ACK with excessive properties causes global-buffer-overflow in ProcessRPMData()

BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, in the official apps/epics client tool on v1.6.0-rc1 (not in the generic BACnet RPM ACK decoder alone) a malicious BACnet/IP endpoint can reply to the EPICS tool’s legitimate ReadPropertyMultiple request with a syntactically valid ReadPropertyMultiple-ACK that contains more heading properties than the tool’s fixed local storage can hold. The response is decoded successfully and later consumed by ProcessRPMData(), which writes property values into a fixed global array using an unbounded linear index. This results in a reproducible global-buffer-overflow in apps/epics/main.c. This is a network-reachable memory corruption in the official epics tool’s response-processing path. The root cause is that apps/epics treats a remotely supplied variable-length RPM property list as if it were a trusted, fixed-size local heading-property set. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

BACnet Stack: Stack-based buffer overflow in Notification Class AddListElement recipient-list decoding

BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, a stack-based out-of-bounds write exists in the Notification Class object implementation when handling AddListElement for the recipient-list property. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.

Unchecked serial-recovery image index causes out-of-bounds slot-table read in MCUboot Zephyr port

MCUboot's Zephyr serial-recovery upload handler bs_upload() in boot/boot_serial/src/boot_serial.c decodes the host-supplied image field of an MCUmgr image-upload request into img_num (a full 32-bit value) and latches it on the off == 0 packet without any range check. It then passes img_num straight to flash_area_id_from_multi_image_slot(img_num, 0), which on the Zephyr port resolves to __flash_area_ids_for_slot() in boot/zephyr/include/sysflash/sysflash.h and indexes the static const int all_slots[] table as all_slots[img_num 2]. That table holds only MCUBOOT_IMAGE_NUMBER 2 entries, so any img_num >= MCUBOOT_IMAGE_NUMBER is an out-of-bounds read. The path is reachable by anyone with access to the serial / SMP recovery console, which is unauthenticated by design, and the bad value is supplied before any image signature is verified. The defect is specific to the default non-direct upload path (MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD disabled) on the Zephyr port with the array-backed slot layout (not CONFIG_SINGLE_APPLICATION_SLOT). It is not gated on a multi-image configuration: MCUBOOT_IMAGE_NUMBER defaults to 1, so even a default single-image build is affected for any image >= 1. The MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD path is safe (its flash_area_id_from_direct_image() switch returns -EINVAL for unknown indices). flash_area_id_from_multi_image_slot() takes a signed int image_index while img_num is uint32_t, so the attacker controls the sign of the index as well as its magnitude: an image of 0xFFFFFFFF converts to -1 and reads all_slots[-2], off the front of the table, while large positive values read off the end (CWE-192). Either way the index multiply img * 2 is performed in int, so a wild offset yields a bus/hard fault, giving a reliable denial of service of the bootloader during recovery. For moderately out-of-range indices the read returns adjacent .rodata as a garbage flash-area id that is handed to flash_area_open(); this normally fails with MGMT_ERR_EINVAL, but if the garbage id happens to match a valid non-image partition, the subsequent erase/write can target a partition outside the image set (CWE-787). The attacker-supplied value is never echoed back, so there is no information disclosure. The fix is to reject img_num >= BOOT_IMAGE_NUMBER on the off == 0 packet, before the slot lookup. The comparison must be made on the unsigned img_num: an equivalent guard applied after the conversion to int would not reject the negative case above. __flash_area_ids_for_slot() should bounds-check its own arguments as defence in depth. This vulnerability was reported independently twice: by NVIDIA Project Vanessa on 2026-06-22, and by Kai Phan (@kaimandalic) on 2026-07-19 as GHSA-8v33-88p6-jffj, which is closed as a duplicate of this advisory. Both original reports are reproduced in full below.

PCI/IOV: Skip VF Resizable BAR restore on read error

In the Linux kernel, the following vulnerability has been resolved: PCI/IOV: Skip VF Resizable BAR restore on read error sriov_restore_vf_rebar_state() uses the VF Resizable BAR Control register to decide how many VF BARs to restore (nbars) and which VF BAR each iteration addresses (bar_idx). bar_idx indexes into dev->sriov->barsz[], which has only PCI_SRIOV_NUM_BARS (6) entries. When a device does not respond, config reads typically return PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx both evaluate to 7. The barsz[] access then goes out of bounds. UBSAN reports this as: UBSAN: array-index-out-of-bounds in drivers/pci/iov.c:948:51 index 7 is out of range for type 'resource_size_t [6]' Observed on an NVIDIA RTX PRO 1000 GPU (GB207GLM) that stopped responding during a failed GC6 power state exit. The subsequent pci_restore_state() invoked sriov_restore_vf_rebar_state() while config reads returned 0xffffffff, triggering the splat. Bail out if any VF Resizable BAR Control read returns PCI_ERROR_RESPONSE. No further VF BARs are touched, which is safe because a config read that returns PCI_ERROR_RESPONSE indicates the device is unreachable and restoration is pointless. This mirrors the guard in pci_restore_rebar_state().

Fraunhofer HHI VVdeC before 3.2.1 Out-of-Bounds Read via Slice::getRefPic

Fraunhofer HHI VVdeC before 3.2.1 contains an out-of-bounds read vulnerability that allows attackers to crash the decoder by supplying bitstreams with overlapping slice CTU coverage. Attackers can code a CTU in a second slice so a bi-predicted BDOF coding unit carries a negative reference index, causing Slice::getRefPic to read outside m_apcRefPicList and crash decoding.

Incorrect handling of unauthenticated downlink RRC Setup messages can cause the baseband to crash

FreeSWITCH mod_spandsp: out-of-bounds write parsing UDPTL error-recovery data

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, udptl_rx_packet() used a peer-controlled FEC entry count directly to fill five-entry FEC arrays in a mod_spandsp T.38 session. A larger count wrote sender-controlled error-recovery data beyond those arrays and persisted the oversized count for a later reconstruction pass. Any peer able to deliver UDPTL to an established T.38 fax session can reach the parser, including deployments using fax applications or a T.38 gateway. The memory corruption can crash FreeSWITCH and end every active call, although remote code execution has not been demonstrated. This issue is fixed in version 1.11.2.

Improper validation of array index in the MigTD's virtio-serial driver for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow a denial of service. System software adversary with a privileged user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

ASN1SCC: Out-of-bounds read via unvalidated character index in ASN.1 string decoders

ASN1SCC is an open source ASN.1 compiler for embedded systems. Prior to 4.7.0.1, the ACN runtime function Acn_Dec_String_CharIndex_private in asn1crt/asn1crt_encoding_acn.c and the generated uPER decoder InternalItem_string_with_alpha_decode in StgC/uper_c.stg do not validate a decoded character index before reading allowedCharSet. For string alphabets whose size is not a power of two, a crafted message can select an unused encoded index, read a small bounded window of adjacent static program constants, and return the byte as a successfully decoded character. The full 128-character IA5String alphabet is not affected. This issue is fixed in version 4.7.0.1.

VRPN through 07.36 Out-of-bounds Write via SENDER_DESCRIPTION/TYPE_DESCRIPTION length index

VRPN through 07.36 contains an out-of-bounds stack write vulnerability in vrpn_Endpoint::handle_sender_message() and handle_type_message() that allows unauthenticated remote peers to write outside a stack buffer via an unchecked length index. Attackers can connect, complete the version-cookie exchange, and send a SENDER_DESCRIPTION or TYPE_DESCRIPTION message with an out-of-range or negative index to crash the process.

Unauthorized Node Access via Manipulated Nodelist in NVIDIA Slurm

NVIDIA Slurm contains a vulnerability where a user could deliberately alter the provided nodelist alongside the --distribution=arbitrary option to gain access to compute nodes outside of the current job allocation.

Netrek-client-cow through 3.3.3 Out-of-Bounds Read via SP_S_MESSAGE Packets

Netrek-client-cow through 3.3.3 contains an out-of-bounds read vulnerability in short.c handleSMessage() that allows malicious servers to crash clients via an unchecked m_recpt index. Attackers controlling a Netrek server or intercepting the plaintext TCP connection can send SP_S_MESSAGE packets with m_recpt of 36 or more, reading past players[] and shipnos to deny service.

usb: typec: tcpm: Validate SVID index in svdm_consume_modes()

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Validate SVID index in svdm_consume_modes() In svdm_consume_modes(), the SVID value is read from pmdata->svids using pmdata->svid_index as an array index without bounds validation: paltmode->svid = pmdata->svids[pmdata->svid_index]; If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it results in an out-of-bounds read of the pmdata->svids array. Because pd_mode_data is embedded inside struct tcpm_port, indexing past svids reads into adjacent fields. In particular: - At index 16, it reads the altmodes count. - At index 18 and beyond, it reads into altmode_desc[], which contains partner-supplied SVDM Discovery Modes VDOs. By injecting a chosen SVID into altmode_desc[0].vdo and driving svid_index to 20, the partner can force paltmode->svid to be loaded with an arbitrary, partner- chosen SVID, which is then registered via typec_partner_register_altmode(). Fix this by validating that pmdata->svid_index is non-negative and strictly less than pmdata->nsvids before accessing the pmdata->svids array inside svdm_consume_modes().

Input: mms114 - fix touch indexing for MMS134S and MMS136

In the Linux kernel, the following vulnerability has been resolved: Input: mms114 - fix touch indexing for MMS134S and MMS136 The MMS134S and MMS136 touch controllers have an event size of 6 bytes rather than 8 bytes. When __mms114_read_reg() reads the touch data packet from the device into the touch buffer, the events are packed tightly at 6-byte intervals. However, the driver iterates through the events using standard C array indexing (touch[index]), where each element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any touch events beyond the first one are read from incorrect offsets and parsed improperly. Fix this by explicitly calculating the byte offset for each touch event based on the device's specific event size.

Input: touchwin - reset the packet index on every complete packet

In the Linux kernel, the following vulnerability has been resolved: Input: touchwin - reset the packet index on every complete packet tw_interrupt() accumulates each non-zero serial byte into a fixed three-byte buffer with a running index that is only reset once a full packet has been received *and* the device's two Y bytes agree: tw->data[tw->idx++] = data; if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) { ... tw->idx = 0; } The reset is gated on tw->data[1] == tw->data[2], a value the device controls. A malicious, malfunctioning or counterfeit Touchwindow peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the index reaches TW_LENGTH without the equality holding, is never reset, and keeps growing, so tw->data[tw->idx++] walks off the end of the three-byte array and the rest of the heap-allocated struct tw, one attacker-chosen byte at a time -- an unbounded, device-driven heap out-of-bounds write. Reset the index on every completed packet and report an event only when the two Y bytes match, like the other serio touchscreen drivers do.

octeontx2-af: CGX: add bounds check to cgx_speed_mbps index

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: CGX: add bounds check to cgx_speed_mbps index cgx_speed_mbps has 13 elements but RESP_LINKSTAT_SPEED can yield values 0-15. If it returns a value >= 13, this causes an out-of-bounds array access. Add a bounds check and default to speed 0 if the index is out of range.

netlabel: validate unlabeled address and mask attribute lengths

In the Linux kernel, the following vulnerability has been resolved: netlabel: validate unlabeled address and mask attribute lengths netlbl_unlabel_addrinfo_get() used the address attribute length to determine whether the attribute data could be read as an IPv4 or IPv6 address, but did not independently validate the corresponding mask attribute length. A crafted Generic Netlink request could therefore provide a valid IPv4/IPv6 address attribute with a shorter mask attribute, which would later be read as a full struct in_addr or struct in6_addr. NLA_BINARY policy lengths are maximum lengths by default, so use NLA_POLICY_EXACT_LEN() for the unlabeled IPv4/IPv6 address and mask attributes. This rejects short attributes during policy validation and also exposes the exact length requirements through policy introspection.

ASN1SCC: Out-of-bounds write in BitStream_DecodeConstraintWholeNumber (uPER/ACN)

ASN1SCC is an open source ASN.1 compiler for embedded systems. Prior to 4.7.0.1, BitStream_DecodeConstraintWholeNumber in asn1crt/asn1crt_encoding.c reads enough bits for a constrained integer but does not reject values above the declared range when the encoded range is not a power of two. Generated uPER and ACN decoders for variable-size SEQUENCE OF, OCTET STRING, BIT STRING, and string values use the invalid result as a loop or copy length, so a crafted over-range size field can write beyond a destination buffer. Decoding untrusted affected data can corrupt heap or stack memory, cause a crash, or potentially permit code execution. This issue is fixed in version 4.7.0.1.

ALSA: ctxfi: Fix missing SPDIFI1 index handling

In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Fix missing SPDIFI1 index handling SPDIF1 DAIO type isn't properly handled in daio_device_index() for hw20k2, and it returned -EINVAL, which ended up with the out-of-bounds array access. Follow the hw20k1 pattern and return the proper index for this type, too.

usb: typec: ucsi: validate connector number in ucsi_notify_common()

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: validate connector number in ucsi_notify_common() The connector number extracted from CCI via UCSI_CCI_CONNECTOR() is a 7-bit field (0-127) that is used to index into the connector array in ucsi_connector_change(). However, the array is only allocated for the number of connectors reported by the device (typically 2-4 entries). A malicious or malfunctioning device could report an out-of-range connector number in the CCI, causing an out-of-bounds array access in ucsi_connector_change(). Add a bounds check in ucsi_notify_common(), the central point where CCI is parsed after arriving from hardware, so that bogus connector numbers are rejected before they propagate further.