Junos OS and Junos OS Evolved: Memory leak due to RSVP neighbor persistent error leading to kernel crash

An Improper Handling of Exceptional Conditions vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a logically adjacent downstream RSVP neighbor to cause kernel memory exhaustion, leading to a kernel crash, resulting in a Denial of Service (DoS). The kernel memory leak and eventual crash will be seen when the downstream RSVP neighbor has a persistent error which will not be corrected. System kernel memory can be monitored through the use of the 'show system kernel memory' command as shown below: user@router> show system kernel memory   Real memory total/reserved: 4130268/ 133344 Kbytes kmem map free: 18014398509110220 Kbytes This issue affects: Junos OS: * All versions before 20.4R3-S9, * All versions of 21.2, * from 21.4 before 21.4R3-S5, * from 22.1 before 22.1R3-S5, * from 22.2 before 22.2R3-S3, * from 22.3 before 22.3R3-S2, * from 22.4 before 22.4R3, * from 23.2 before 23.2R2; Junos OS Evolved: * All versions before 21.4R3-S5-EVO, * from 22.1-EVO before 22.1R3-S5-EVO, * from 22.2-EVO before 22.2R3-S3-EVO, * from 22.3-EVO before 22.3R3-S2-EVO, * from 22.4-EVO before 22.4R3-EVO, * from 23.2-EVO before 23.2R2-EVO.

RustFS gRPC GetMetrics deserialization panic enables remote DoS

RustFS is a distributed object storage system built in Rust. In versions 1.0.0-alpha.13 to 1.0.0-alpha.77, a malformed gRPC GetMetrics request causes get_metrics to unwrap() failed deserialization of metric_type/opts, panicking the handler thread and enabling remote denial of service of the metrics endpoint. This issue has been patched in version 1.0.0-alpha.78.

A vulnerability in the Bidirectional Forwarding Detection (BFD) offload implementation of Cisco Catalyst 4500 Series Switches and Cisco Catalyst 4500-X Series Switches could allow an unauthenticated, remote attacker to cause a crash of the iosd process, causing a denial of service (DoS) condition. The vulnerability is due to insufficient error handling when the BFD header in a BFD packet is incomplete. An attacker could exploit this vulnerability by sending a crafted BFD message to or across an affected switch. A successful exploit could allow the attacker to trigger a reload of the system. This vulnerability affects Catalyst 4500 Supervisor Engine 6-E (K5), Catalyst 4500 Supervisor Engine 6L-E (K10), Catalyst 4500 Supervisor Engine 7-E (K10), Catalyst 4500 Supervisor Engine 7L-E (K10), Catalyst 4500E Supervisor Engine 8-E (K10), Catalyst 4500E Supervisor Engine 8L-E (K10), Catalyst 4500E Supervisor Engine 9-E (K10), Catalyst 4500-X Series Switches (K10), Catalyst 4900M Switch (K5), Catalyst 4948E Ethernet Switch (K5). Cisco Bug IDs: CSCvc40729.

x86: Incorrect stubs exception handling for flags recovery

Certain instructions need intercepting and emulating by Xen. In some cases Xen emulates the instruction by replaying it, using an executable stub. Some instructions may raise an exception, which is supposed to be handled gracefully. Certain replayed instructions have additional logic to set up and recover the changes to the arithmetic flags. For replayed instructions where the flags recovery logic is used, the metadata for exception handling was incorrect, preventing Xen from handling the the exception gracefully, treating it as fatal instead.

Protocol Downgrade in Comarch ERP XL

Comarch ERP XL client is vulnerable to MS SQL protocol downgrade request from a server side, what could lead to an unencrypted communication vulnerable to data interception and modification. This issue affects ERP XL: from 2020.2.2 through 2023.2.

SCP-Firmware Vulnerability

Specifically crafted SCMI messages sent to an SCP running SCP-Firmware release versions up to and including 2.15.0 may lead to a Usage Fault and crash the SCP

SCP-Firmware Vulnerability

Specifically crafted SCMI messages sent to an SCP running SCP-Firmware release versions up to and including 2.15.0 may lead to a Usage Fault and crash the SCP

The transport_message_handler function in SCP-Firmware release versions 2.11.0-2.15.0 does not properly handle errors, potentially allowing an Application Processor (AP) to cause a buffer overflow in System Control Processor (SCP) firmware.

parisc: Clear stale IIR value on instruction access rights trap

In the Linux kernel, the following vulnerability has been resolved: parisc: Clear stale IIR value on instruction access rights trap When a trap 7 (Instruction access rights) occurs, this means the CPU couldn't execute an instruction due to missing execute permissions on the memory region. In this case it seems the CPU didn't even fetched the instruction from memory and thus did not store it in the cr19 (IIR) register before calling the trap handler. So, the trap handler will find some random old stale value in cr19. This patch simply overwrites the stale IIR value with a constant magic "bad food" value (0xbaadf00d), in the hope people don't start to try to understand the various random IIR values in trap 7 dumps.

busybox: invalid free or segmentation fault via malformed gzip data

decompress_gunzip.c in BusyBox through 1.32.1 mishandles the error bit on the huft_build result pointer, with a resultant invalid free or segmentation fault, via malformed gzip data.

Login fail open on JAAS misconfiguration in DataHub

DataHub is an open-source metadata platform. In the event a system is using Java Authentication and Authorization Service (JAAS) authentication and that system is given a configuration which contains an error, the authentication for the system will fail open and allow an attacker to login using any username and password. The reason for this is that while an error is thrown in the `authenticateJaasUser` method it is swallowed without propagating the error. As a result of this issue unauthenticated users may gain access to the system. Users are advised to upgrade. There are no known workarounds for this issue. This vulnerability was discovered and reported by the GitHub Security lab and is tracked as GHSL-2022-081.

Improper Handling of Exceptional Conditions in Newtonsoft.Json

Newtonsoft.Json before version 13.0.1 is affected by a mishandling of exceptional conditions vulnerability. Crafted data that is passed to the JsonConvert.DeserializeObject method may trigger a StackOverflow exception resulting in denial of service. Depending on the usage of the library, an unauthenticated and remote attacker may be able to cause the denial of service condition.

Possible denial of service vulnerability with Content-length header in Traefik

Traefik is an HTTP reverse proxy and load balancer. In affected versions sending a GET request to any Traefik endpoint with the "Content-length" request header results in an indefinite hang with the default configuration. This vulnerability can be exploited by attackers to induce a denial of service. This vulnerability has been addressed in version 2.11.2 and 3.0.0-rc5. Users are advised to upgrade. For affected versions, this vulnerability can be mitigated by configuring the readTimeout option.

Mozilla: Uninitialized memory leakage in Windows sandbox

A vulnerability exists in the Windows sandbox where an uninitialized value in memory can be leaked to a renderer from a broker when making a call to access an otherwise unavailable file. This results in the potential leaking of information stored at that memory location. *Note: this issue only occurs on Windows. Other operating systems are unaffected.*. This vulnerability affects Thunderbird < 60.7, Firefox < 67, and Firefox ESR < 60.7.

Vasion Print (formerly PrinterLogic) Insecure Windows Components Lack Modern Memory Protections and Use Outdated Runtimes

Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 25.1.102 and Application versions prior to 25.1.1413 include Windows client components (PrinterInstallerClientInterface.exe, PrinterInstallerClient.exe, PrinterInstallerClientLauncher.exe) that lack modern compile-time and runtime exploit mitigations and rely on outdated runtimes. These binaries are built as 32-bit, without Data Execution Prevention (DEP), Address Space Layout Randomization (ASLR), Control Flow Guard (CFG), or stack-protection, and they incorporate legacy technologies (Pascal/Delphi and Python 2) which are no longer commonly maintained. Several of these processes run with elevated privileges (NT AUTHORITY\SYSTEM for PrinterInstallerClient.exe and PrinterInstallerClientLauncher.exe), and the client automatically downloads and installs printer drivers. The absence of modern memory safety mitigations and the use of unmaintained runtimes substantially increase the risk that memory-corruption or other exploit primitives — for example from crafted driver content or maliciously crafted inputs — can be turned into remote or local code execution and privilege escalation to SYSTEM. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced.

smtp_mailaddr in smtp_session.c in OpenSMTPD 6.6, as used in OpenBSD 6.6 and other products, allows remote attackers to execute arbitrary commands as root via a crafted SMTP session, as demonstrated by shell metacharacters in a MAIL FROM field. This affects the "uncommented" default configuration. The issue exists because of an incorrect return value upon failure of input validation.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Netatalk. Authentication is not required to exploit this vulnerability. The specific flaw exists within the parse_entries function. The issue results from the lack of proper error handling when parsing AppleDouble entries. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-15819.

ffr: Flowspec overflow in bgpd/bgp_flowspec.c

bgpd/bgp_flowspec.c in FRRouting (FRR) before 8.4.3 mishandles an nlri length of zero, aka a "flowspec overflow."

An arbitrary file copy vulnerability in mod_copy in ProFTPD up to 1.3.5b allows for remote code execution and information disclosure without authentication, a related issue to CVE-2015-3306.

DoS vulnerability in Vilar VS-IPC1002 IP cameras

Vilar VS-IPC1002 IP cameras are vulnerable to DoS (Denial-of-Service) attacks. An unauthenticated attacker on the same local network might send a crafted request to /cgi-bin/action endpoint and render the device completely unresponsive. A manual restart of the device is required.  The vendor did not respond in any way. Only version 1.1.0.18 was tested, other versions might be vulnerable as well.