Socket.IO: Zero-attachment Memory Exhaustion

Socket.IO enables bidirectional and low-latency communication for every platform. Prior to 4.2.7, 3.4.5, and 3.3.6, a specially crafted Socket.IO packet can make the server wait for a large number of binary attachments and buffer them, which can be exploited to make the server run out of memory. This vulnerability is fixed in 4.2.7, 3.4.5, and 3.3.6.

CWE-754: Improper Check for Unusual or Exceptional Conditions vulnerability that could cause arbitrary code execution, denial of service and loss of confidentiality & integrity when communicating over the Modbus TCP protocol.

ksmbd: Fix the missing xa_store error check

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix the missing xa_store error check xa_store() can fail, it return xa_err(-EINVAL) if the entry cannot be stored in an XArray, or xa_err(-ENOMEM) if memory allocation failed, so check error for xa_store() to fix it.

posix-clock: Fix missing timespec64 check in pc_clock_settime()

In the Linux kernel, the following vulnerability has been resolved: posix-clock: Fix missing timespec64 check in pc_clock_settime() As Andrew pointed out, it will make sense that the PTP core checked timespec64 struct's tv_sec and tv_nsec range before calling ptp->info->settime64(). As the man manual of clock_settime() said, if tp.tv_sec is negative or tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL, which include dynamic clocks which handles PTP clock, and the condition is consistent with timespec64_valid(). As Thomas suggested, timespec64_valid() only check the timespec is valid, but not ensure that the time is in a valid range, so check it ahead using timespec64_valid_strict() in pc_clock_settime() and return -EINVAL if not valid. There are some drivers that use tp->tv_sec and tp->tv_nsec directly to write registers without validity checks and assume that the higher layer has checked it, which is dangerous and will benefit from this, such as hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(), and some drivers can remove the checks of itself.

cifs: fix warning when destroy 'cifs_io_request_pool'

In the Linux kernel, the following vulnerability has been resolved: cifs: fix warning when destroy 'cifs_io_request_pool' There's a issue as follows: WARNING: CPU: 1 PID: 27826 at mm/slub.c:4698 free_large_kmalloc+0xac/0xe0 RIP: 0010:free_large_kmalloc+0xac/0xe0 Call Trace: <TASK> ? __warn+0xea/0x330 mempool_destroy+0x13f/0x1d0 init_cifs+0xa50/0xff0 [cifs] do_one_initcall+0xdc/0x550 do_init_module+0x22d/0x6b0 load_module+0x4e96/0x5ff0 init_module_from_file+0xcd/0x130 idempotent_init_module+0x330/0x620 __x64_sys_finit_module+0xb3/0x110 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Obviously, 'cifs_io_request_pool' is not created by mempool_create(). So just use mempool_exit() to revert 'cifs_io_request_pool'.

nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error

In the Linux kernel, the following vulnerability has been resolved: nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error The `nouveau_dmem_copy_one` function ensures that the copy push command is sent to the device firmware but does not track whether it was executed successfully. In the case of a copy error (e.g., firmware or hardware failure), the copy push command will be sent via the firmware channel, and `nouveau_dmem_copy_one` will likely report success, leading to the `migrate_to_ram` function returning a dirty HIGH_USER page to the user. This can result in a security vulnerability, as a HIGH_USER page that may contain sensitive or corrupted data could be returned to the user. To prevent this vulnerability, we allocate a zero page. Thus, in case of an error, a non-dirty (zero) page will be returned to the user.

tipc: Return non-zero value from tipc_udp_addr2str() on error

In the Linux kernel, the following vulnerability has been resolved: tipc: Return non-zero value from tipc_udp_addr2str() on error tipc_udp_addr2str() should return non-zero value if the UDP media address is invalid. Otherwise, a buffer overflow access can occur in tipc_media_addr_printf(). Fix this by returning 1 on an invalid UDP media address.

net: dsa: mv88e6xxx: Correct check for empty list

In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: Correct check for empty list Since commit a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses") mv88e6xxx_default_mdio_bus() has checked that the return value of list_first_entry() is non-NULL. This appears to be intended to guard against the list chip->mdios being empty. However, it is not the correct check as the implementation of list_first_entry is not designed to return NULL for empty lists. Instead, use list_first_entry_or_null() which does return NULL if the list is empty. Flagged by Smatch. Compile tested only.

tee: optee: Fix kernel panic caused by incorrect error handling

In the Linux kernel, the following vulnerability has been resolved: tee: optee: Fix kernel panic caused by incorrect error handling The error path while failing to register devices on the TEE bus has a bug leading to kernel panic as follows: [ 15.398930] Unable to handle kernel paging request at virtual address ffff07ed00626d7c [ 15.406913] Mem abort info: [ 15.409722] ESR = 0x0000000096000005 [ 15.413490] EC = 0x25: DABT (current EL), IL = 32 bits [ 15.418814] SET = 0, FnV = 0 [ 15.421878] EA = 0, S1PTW = 0 [ 15.425031] FSC = 0x05: level 1 translation fault [ 15.429922] Data abort info: [ 15.432813] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 15.438310] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 15.443372] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 15.448697] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000d9e3e000 [ 15.455413] [ffff07ed00626d7c] pgd=1800000bffdf9003, p4d=1800000bffdf9003, pud=0000000000000000 [ 15.464146] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Commit 7269cba53d90 ("tee: optee: Fix supplicant based device enumeration") lead to the introduction of this bug. So fix it appropriately.

drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c Before using list_first_entry, make sure to check that list is not empty, if list is empty return -ENODATA. Fixes the below: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1347 kfd_create_indirect_link_prop() warn: can 'gpu_link' even be NULL? drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1428 kfd_add_peer_prop() warn: can 'iolink1' even be NULL? drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1433 kfd_add_peer_prop() warn: can 'iolink2' even be NULL?

btrfs: fix abort logic in btrfs_replace_file_extents

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix abort logic in btrfs_replace_file_extents Error injection testing uncovered a case where we'd end up with a corrupt file system with a missing extent in the middle of a file. This occurs because the if statement to decide if we should abort is wrong. The only way we would abort in this case is if we got a ret != -EOPNOTSUPP and we called from the file clone code. However the prealloc code uses this path too. Instead we need to abort if there is an error, and the only error we _don't_ abort on is -EOPNOTSUPP and only if we came from the clone file code.

SurrealDB before 3.1.0 Denial of Service via LIVE Query

SurrealDB versions before 3.1.0 contain a denial of service vulnerability where malicious LIVE queries with WHERE clauses that evaluate to errors cause all CREATE, UPDATE, and DELETE operations on the watched table to fail. An authenticated user with only select permission can prevent write operations on a table for any user, including root, by registering a LIVE query that triggers evaluation errors until the query is killed or the session ends.

Libunbound applications configured with 'unwanted-reply-threshold' could eventually be abruptly terminated

With NLnet Labs Unbound up to and including version 1.25.1, applications using libunbound and configured with 'unwanted-reply-threshold', could eventually be abruptly terminated if the threshold is reached and libunbound needs to call 'libworker_alloc_cleanup' since the function is absent from the function call allow list. When an application using libunbound sets 'unwanted-reply-threshold' to any non-zero value and the iterator queries an authoritative that replies with enough wrong-transaction-ID UDP datagrams to cross the threshold, the 'libworker_alloc_cleanup' will eventually be called. Since the function is absent from the function call allow list, this leads to a fatal exit of libunbound and eventual termination of the embedding application.Unbound itself is not affected since its relevant function 'worker_alloc_cleanup' is registed in the allow list and proceeds to perform the documented cache flush.

DOMPurify through 3.3.3 Cross-Site Scripting via IN_PLACE mode

DOMPurify through 3.3.3 fails to sanitize DOM elements passed via IN_PLACE mode when the element originates from a different window/realm (e.g., an iframe's contentDocument). A cross-realm instanceof check in the private _isNode() function returns false for foreign-realm nodes, causing DOMPurify to stringify the element (yielding '[object HTMLDivElement]'), silently reset IN_PLACE to false, and return the unsanitized element unchanged with any XSS payloads intact.

Nimiq network-libp2p: DHT query poisoning via first-record verification failure

Nimiq is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. Prior to version 1.4.0, iIn handle_dht_get(), the DhtResults accumulator is only initialized when the first DHT record passes verification. If the first record fails (from a malicious DHT node), DhtResults is never created, and all subsequent valid records are discarded with "DHT inconsistent state" errors. This issue has been patched in version 1.4.0.

Posting a malicious markdown image crashes the Mattermost Desktop App

Mattermost Desktop App versions <=6.2 5.5.13 6.0.2.0 fail to properly null check when checking for headers in the Mattermost Desktop App which allows any user to crash another channel members Desktop App via posting a malicious link with an embedded image that misses one of those headers. Mattermost Advisory ID: MMSA-2026-00668

Junos OS: MX Series with SPC3, SRX Series: Specific packet in response to a TCP connection establishment by the affected device can crash the PFE

An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on MX with SPC3 and SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). When an affected device initiates a TCP connection to an attacker-controlled system that responds with a specific packet, this causes a PFE crash and restart, which affects all services until the system has automatically recovered. This issue can happen among others in the following scenarios: ALG, SSL proxy, UTM, RTLOG, AppQoE probing, AAMW, ICAP, URL filtering. This issue affects Junos OS on MX Series with SPC3, SRX5k Series with SPC3, SRX1600 Series, SRX2300 Series, SRX4000 Series, and vSRX Series: * all versions before 23.2R2-S4, * 23.4 versions before 23.4R2-S5, * 24.2 versions before 24.2R2.

Junos OS Evolved: PTX Series: Receipt of repeated ECMP routing updates results in PFE crash

An Improper Check for Unusual or Exceptional Conditions vulnerability in the advanced forwarding toolkit (evo-aftmand) of Juniper Networks Junos OS Evolved on PTX Series allows an unauthenticated network-based attacker generating continuous routing updates, resulting in unilist ECMP routes, to crash the evo-aftmand process on the PFE, leading to a Denial-of-Service (DoS). The conditions required for successful exploitation are based on a sequence of events that are outside an attacker's direct control. Unified list (unilist) ECMP routes are a specific ECMP behavior where multiple equal-cost routes share a single logical next-hop list entry. The router treats them as one route with multiple next hops and load balances traffic across that unified list. Due to an issue processing unilist ECMP routing updates, internal state corruption may occur, especially in large-scale ECMP unilist deployments, leading to the evo-aftmand process crashing, resulting in an evo-aftmand-bx core. Manual intervention is required to recover by rebooting the system or restarting the FPC. This issue affects Junos OS Evolved on PTX : * from 24.4R2-EVO before 24.4R2-S3-EVO; * from 25.2 before 25.2R2-EVO.

Junos OS and Junos OS Evolved: When a specifically malformed BGP route update is received RPD crashes

An Improper Check for Unusual or Exceptional Conditions vulnerability in the routing protocol daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent, unauthenticated attacker sending a specific BGP update over an established BGP session to cause a Denial-of-Service (DoS). Upon receipt of a specifically malformed non-inet/inet6 unicast BGP update, an RPD crash and restart is triggered, which will cause a complete service outage until routing has reconverged. The rpd crash occurs before the update can be readvertised, so there is no downstream propagation. This issue affects: * Junos OS versions 25.2 before 25.2R2; * Junos OS Evolved versions 25.2 before 25.2R2-EVO. This issue doesn't affect Junos OS versions before 25.2R1 nor Junos OS Evolved versions before 25.2R1-EVO.

Junos OS: QFX10000 Series: IPv6 multicast traffic received on non-IRB interfaces causes a multicast flood

An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on QFX10000 Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS). On all QFX10000 platforms in an EVPN-VxLAN scenario, if an attacker sends IPv6 multicast traffic and these packets reach the non-IRB interface of a spine switch it floods the packet to other spines and all Ethernet Segment Identifier (ESI) leaf switches. This flooding causes the packet to be forwarded in a endless loop, which can lead to saturation of the involved links and in turn impact to legitimate traffic. This issue affects Junos OS on QFX10000 Series: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S4. This issue does not affect Junos version after 24.4 as the QFX10000 Series devices are not supported on newer versions anymore.