bpf: Fix ld_{abs,ind} failure path analysis in subprogs

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix ld_{abs,ind} failure path analysis in subprogs Usage of ld_{abs,ind} instructions got extended into subprogs some time ago via commit 09b28d76eac4 ("bpf: Add abnormal return checks."). These are only allowed in subprograms when the latter are BTF annotated and have scalar return types. The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 + exit) from legacy cBPF times. While the enforcement is on scalar return types, the verifier must also simulate the path of abnormal exit if the packet data load via ld_{abs,ind} failed. This is currently not the case. Fix it by having the verifier simulate both success and failure paths, and extend it in similar ways as we do for tail calls. The success path (r0=unknown, continue to next insn) is pushed onto stack for later validation and the r0=0 and return to the caller is done on the fall-through side.

xfrm6: fix uninitialized saddr in xfrm6_get_saddr()

In the Linux kernel, the following vulnerability has been resolved: xfrm6: fix uninitialized saddr in xfrm6_get_saddr() xfrm6_get_saddr() does not check the return value of ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable source address (returns -EADDRNOTAVAIL), saddr->in6 is left uninitialized, but xfrm6_get_saddr() still returns 0 (success). This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized address in xfrm_state_find(), triggering KMSAN warning: ===================================================== BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940 xfrm_state_find+0x2424/0xa940 xfrm_resolve_and_create_bundle+0x906/0x5a20 xfrm_lookup_with_ifid+0xcc0/0x3770 xfrm_lookup_route+0x63/0x2b0 ip_route_output_flow+0x1ce/0x270 udp_sendmsg+0x2ce1/0x3400 inet_sendmsg+0x1ef/0x2a0 __sock_sendmsg+0x278/0x3d0 __sys_sendto+0x593/0x720 __x64_sys_sendto+0x130/0x200 x64_sys_call+0x332b/0x3e70 do_syscall_64+0xd3/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable tmp.i.i created at: xfrm_resolve_and_create_bundle+0x3e3/0x5a20 xfrm_lookup_with_ifid+0xcc0/0x3770 ===================================================== Fix by checking the return value of ipv6_dev_get_saddr() and propagating the error.

rxrpc: reject undecryptable rxkad response tickets

In the Linux kernel, the following vulnerability has been resolved: rxrpc: reject undecryptable rxkad response tickets rxkad_decrypt_ticket() decrypts the RXKAD response ticket and then parses the buffer as plaintext without checking whether crypto_skcipher_decrypt() succeeded. A malformed RESPONSE can therefore use a non-block-aligned ticket length, make the decrypt operation fail, and still drive the ticket parser with attacker-controlled bytes. Check the decrypt result and abort the connection with RXKADBADTICKET when ticket decryption fails.

D-Link E15/M32/R15/R32 MQTT Broker passwd hard-coded credentials

A vulnerability was detected in D-Link E15, M32, R15 and R32. This issue affects some unknown processing of the file /etc/emDaemon/passwd of the component MQTT Broker. The manipulation results in hard-coded credentials. It is possible to launch the attack remotely. The exploit is now public and may be used.

An unchecked return value in Ivanti Connect Secure before 22.7R2.9 or 22.8R2, Ivanti Policy Secure before 22.7R1.6, Ivanti ZTA Gateway before 2.8R2.3-723 and Ivanti Neurons for Secure Access before 22.8R1.4 (Fix deployed on 02-Aug-2025) allows a remote authenticated attacker with admin privileges to trigger a denial of service.

openssh: openssh: post-authentication process retains root without file-descriptor passing

A flaw was found in OpenSSH. On platforms that cannot pass file descriptors and that need root to allocate a terminal, the post-authentication session process keeps root privilege. An authenticated user can then perform actions as root, including privileged socket connections and binding forwards to low-numbered ports.

vxlan: do not arm the ageing timer on a device that is down

In the Linux kernel, the following vulnerability has been resolved: vxlan: do not arm the ageing timer on a device that is down vxlan_changelink() arms vxlan->age_timer whenever the requested ageing interval differs from the configured one: if (conf.age_interval != vxlan->cfg.age_interval) mod_timer(&vxlan->age_timer, jiffies); There is no netif_running() test, so the timer is armed even on a device that was never brought up. The only synchronous cancel in the driver is the timer_delete_sync() in vxlan_stop(), which is .ndo_stop. netif_close_many() drops devices without IFF_UP before __dev_close_many() runs, so that cancel is skipped for such a device. vxlan_setup() sets dev->needs_free_netdev = true and age_timer is a member of struct vxlan_dev, so free_netdev() releases the allocation the timer lives in while it is still queued on a timer_base. expire_timers() unlinks the entry before it loads timer->function, so the timer core writes through the freed object's list pointers: BUG: KASAN: slab-use-after-free in __run_timers+0x208/0x654 Write of size 8 at addr ffff00001adace68 by task true/192 __asan_store8+0x84/0xac __run_timers+0x208/0x654 run_timer_softirq+0x154/0x18c Allocated by task 189: alloc_netdev_mqs+0x64/0x720 rtnl_create_link+0x4ac/0x520 rtnl_newlink+0x758/0xd00 Freed by task 191: netdev_release+0x40/0x58 netdev_run_todo+0x4a4/0x8c0 rtnl_dellink+0x200/0x4e8 The rtnl operations involved are netns-scoped, so an unprivileged user can perform them in a new user and network namespace. Arming the timer on a down device never had an effect: vxlan_cleanup() returns early on !netif_running(), and vxlan_open() arms the timer for any non-zero interval once the device is brought up. Add the missing test. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>

RDMA/bnxt_re: Proper rollback if the ioremap fails

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Proper rollback if the ioremap fails bnxt_qplib_alloc_dpi returns success even if ioremap fails. Add the proper rollback when the ioremap fails and return -ENOMEM status.

block: don't revert iter for -EIOCBQUEUED

In the Linux kernel, the following vulnerability has been resolved: block: don't revert iter for -EIOCBQUEUED blkdev_read_iter() has a few odd checks, like gating the position and count adjustment on whether or not the result is bigger-than-or-equal to zero (where bigger than makes more sense), and not checking the return value of blkdev_direct_IO() before doing an iov_iter_revert(). The latter can lead to attempting to revert with a negative value, which when passed to iov_iter_revert() as an unsigned value will lead to throwing a WARN_ON() because unroll is bigger than MAX_RW_COUNT. Be sane and don't revert for -EIOCBQUEUED, like what is done in other spots.

crypto: bcm - add error check in the ahash_hmac_init function

In the Linux kernel, the following vulnerability has been resolved: crypto: bcm - add error check in the ahash_hmac_init function The ahash_init functions may return fails. The ahash_hmac_init should not return ok when ahash_init returns error. For an example, ahash_init will return -ENOMEM when allocation memory is error.

agno-agi agno Delegation Feature _default_tools.py member_agent.run unnecessary privileges

A weakness has been identified in agno-agi agno up to 3.0.6/3.1.1. This issue affects the function member_agent.run in the library libs/agno/agno/team/_default_tools.py of the component Delegation Feature. Executing a manipulation can lead to execution with unnecessary privileges. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks. The pull request to fix this issue awaits acceptance.

FunnyWolf Viper config hard-coded credentials

A security flaw has been discovered in FunnyWolf Viper up to 3.1.11. The affected element is an unknown function of the file /root/viper/.git/config. Performing a manipulation results in hard-coded credentials. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks.

org.eclipse.jetty/jetty-security: Eclipse Jetty: Plaintext password disclosure via session persistence

Eclipse Jetty's `SessionAuthentication` retains authentication credentials in a serializable object. When the credentials contain a plaintext password and the authenticated session is persisted to a session data store, the password may consequently be written to persistent storage in plaintext. An attacker with sufficient privileges to read the persisted session data may obtain the plaintext passwords of authenticated users.

Plaintext storage of a password in WebCTI

WebCTI service for Slican IPx telephone exchanges stores temporary subscriber password in plaintext. An attacker with access to the database can obtain the user's password and log in to the subscriber's account. This issue was fixed in IPx series version 6.62.0100.

cachefiles: Fix error return when vfs_mkdir() fails

In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix error return when vfs_mkdir() fails When vfs_mkdir() fails, the error code is not extracted from the returned error pointer. This causes mkdir_error to be reached with ret=0, which leads to returning ERR_PTR(0) (NULL) instead of a proper error pointer. Fix this by extracting the error code from the error pointer when vfs_mkdir() fails.

wifi: cfg80211: undo netns switch if renaming the wiphy fails

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: undo netns switch if renaming the wiphy fails Once all the interfaces have been moved, cfg80211_switch_netns() moves the wiphy itself by setting its network namespace and then renaming it, which makes sysfs move it. The rename can fail (but only on allocation failures), leaving things mixed up and hitting the warning there. Ignoring it isn't great, undo the move and let the change fail in this case. If undo fails then WARN, then things would again be stuck in two different network namespaces.

ipv4: icmp: fix null-ptr-deref in icmp_build_probe()

In the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: fix null-ptr-deref in icmp_build_probe() ipv6_stub->ipv6_dev_find() may return ERR_PTR(-EAFNOSUPPORT) when the IPv6 stack is not active (CONFIG_IPV6=m and not loaded), and passing this error pointer to dev_hold() will cause a kernel crash with null-ptr-deref. Instead, silently discard the request. RFC 8335 does not appear to define a specific response for the case where an IPv6 interface identifier is syntactically valid but the implementation cannot perform the lookup at runtime, and silently dropping the request may safer than misreporting "No Such Interface".

cemtan sar2html sar2html.py hard-coded credentials

A security flaw has been discovered in cemtan sar2html 4.0.0. Affected by this vulnerability is an unknown functionality of the file sar2html.py. The manipulation of the argument SECRET_KEY results in hard-coded credentials. The attack can be executed remotely. The project was informed of the problem early through an issue report but has not responded yet.

chromium-browser: Privilege elevation in Installer

Privilege elevation in Installer in Google Chrome on on Windows prior to 155.0.8059.79 allowed a local attacker to obtain sensitive information via a local program. (Chromium security severity: High)

meetecho janus-gateway Admin API admin.js hard-coded credentials

A security vulnerability has been detected in meetecho janus-gateway up to 1.4.2. This vulnerability affects unknown code of the file html/demos/admin.js of the component Admin API. Such manipulation leads to hard-coded credentials. The attack can be executed remotely. The exploit has been disclosed publicly and may be used.