Search vulnerabilities

Results 29,312

Export CSV
CVE-2026-64456

hwrng: virtio: clamp device-reported used.len at copy_data()

In the Linux kernel, the following vulnerability has been resolved: hwrng: virtio: clamp device-reported used.len at copy_data() random_recv_done() stores the device-reported used.len directly into vi->data_avail. copy_data() then indexes vi->data[] using vi->data_idx (advanced by previous copy_data() calls) and issues a memcpy() without re-validating either value against the posted buffer size sizeof(vi->data) (SMP_CACHE_BYTES bytes, typically 32 or 64). A malicious or buggy virtio-rng backend can set used.len beyond sizeof(vi->data), steering the memcpy() past the end of the inline array into adjacent kmalloc-1k slab bytes. hwrng_fillfn() mixes those bytes into the guest RNG, and guest root can also observe them directly via /dev/hwrng. Concrete impact is inside the guest: - Memory-safety / hardening: any virtio-rng backend that over-reports used.len causes the driver to read past vi->data into unrelated slab contents. hwrng_fillfn() is a kernel thread that runs as soon as the device is probed; no guest userspace interaction is required to first-trigger the OOB. - Cross-boundary leak (confidential-compute threat model): a malicious hypervisor cooperating with a malicious or compromised guest root userspace can use /dev/hwrng as a leak channel for guest-kernel heap data. The host sets a large used.len, guest root reads /dev/hwrng, and the returned bytes contain guest kernel slab contents that were adjacent to vi->data. In practice, confidential-compute guests (SEV-SNP, TDX) usually disable virtio-rng entirely, so this path is narrow, but the fix is still worth carrying because the underlying memory-safety bug contaminates the guest RNG on any host. KASAN confirms the OOB on a 7.1-rc4 guest whose virtio-rng backend has been patched to report used.len = 0x10000: BUG: KASAN: slab-out-of-bounds in virtio_read+0x394/0x5d0 Read of size 64 at addr ffff88800ae0ba20 by task hwrng/52 Call Trace: __asan_memcpy+0x23/0x60 virtio_read+0x394/0x5d0 hwrng_fillfn+0xb2/0x470 kthread+0x2cc/0x3a0 Allocated by task 1: probe_common+0xa5/0x660 virtio_dev_probe+0x549/0xbc0 The buggy address belongs to the object at ffff88800ae0b800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes to the right of allocated 544-byte region [ffff88800ae0b800, ffff88800ae0ba20) Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer overflow in USB transport layer"), which hardened usb9pfs_rx_complete() against unchecked device-reported length in the USB 9p transport. With the clamp at point of use and array_index_nospec() in place, the same harness boots cleanly: copy_data() returns zero for the bogus report, the device-supplied bytes after data_idx are discarded, and the driver issues a fresh request.

CVSS 3.1 · 7.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-21963

An out-of-bounds read vulnerability in the IOMMU could allow a malicious guest to corrupt hypervisor (HV) pages and potentially cause a host crash leading to loss of availability.

CVSS 4.0 · 6 Medium EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2026-125393

MailEnable Enterprise Premium before 10.62 Heap Overflow via IMAP X-FB-FETCH

MailEnable Enterprise Premium before 10.62 contains a heap overflow vulnerability in the IMAP X-FB-FETCH command that allows authenticated users to overflow a fixed 0x400-byte heap buffer. Attackers can supply an X-FB-USER address longer than about 1016 bytes, which is formatted without a length check, to crash the IMAP service and cause denial of service.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-76964

Memory Corruption Vulnerability in SAP NetWeaver AS ABAP (Internet Communication Manager)

SAP NetWeaver Application Server ABAP does not sufficiently validate certain network input processed by an internal component. An unauthenticated attacker could send specially crafted network traffic to trigger a memory corruption condition in the affected functionality. Successful exploitation could allow the attacker to execute arbitrary code and fully compromise the system, resulting in a high impact on confidentiality, integrity and availability of the system.

CVSS 3.1 · 10 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-63883

serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ

In the Linux kernel, the following vulnerability has been resolved: serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ When uart_flush_buffer() runs before the DMA completion IRQ is delivered, the following race can occur (all steps serialized by uart_port_lock): 1. DMA starts: tx_remaining = N, kfifo contains N bytes 2. DMA completes in hardware; IRQ is pending but not yet delivered 3. uart_flush_buffer() acquires the port lock and calls kfifo_reset(), making kfifo_len() = 0 while tx_remaining remains N 4. uart_flush_buffer() releases the port lock 5. DMA IRQ fires; handle_tx_dma() acquires the port lock and calls uart_xmit_advance(uport, tx_remaining) on an empty kfifo uart_xmit_advance() increments kfifo->out by tx_remaining. Since kfifo_reset() already set both in and out to 0, out wraps past in, causing kfifo_len() to return UART_XMIT_SIZE - tx_remaining. The next start_tx_dma() call then submits a DMA transfer of stale buffer data. Fix this by snapshotting kfifo_len() at the start of handle_tx_dma() and skipping uart_xmit_advance() when fifo_len < tx_remaining, which indicates the kfifo was reset by a preceding flush.

CVSS 3.1 · 7.3 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-58696

In multiple locations, there is a possible out-of-bounds write due to a heap buffer overflow. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.

CVSS 3.1 · 6.7 Medium EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2026-64567

btrfs: reject free space cache with more entries than pages

In the Linux kernel, the following vulnerability has been resolved: btrfs: reject free space cache with more entries than pages When loading a v1 free space cache, __load_free_space_cache() takes num_entries and num_bitmaps straight from the on-disk btrfs_free_space_header. That header is stored in the tree_root under a key with type 0, which the tree-checker has no case for, so neither count is validated before the load trusts it. The load loops num_entries times and maps the next page whenever the current one runs out, going through io_ctl_check_crc() -> io_ctl_map_page(), which does io_ctl->pages[io_ctl->index++]. But pages[] is allocated in io_ctl_init() from the cache inode's i_size, not from num_entries: num_pages = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE); io_ctl->pages = kcalloc(num_pages, sizeof(struct page *), GFP_NOFS); So if num_entries claims more records than the pages can hold, io_ctl->index runs off the end of pages[]. The write side never hits this because io_ctl_add_entry() and io_ctl_add_bitmap() both stop once io_ctl->index >= io_ctl->num_pages; the read side just never had the same check. To trigger it, take a clean cache (num_entries = <N> here), set num_entries in the header to 0x10000, and fix up the leaf checksum so it still passes the tree-checker. The cache inode has i_size = 65536, so num_pages is 16 and pages[] is a 16-pointer (kmalloc-128) array. The load now tries to read 65536 entries, io_ctl->index walks up to 16, and pages[16] is read past the array: BUG: KASAN: slab-out-of-bounds in io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565) Read of size 8 at addr ffff88800c833a80 by task kworker/u8:3/58 io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565) __load_free_space_cache (fs/btrfs/free-space-cache.c:655 fs/btrfs/free-space-cache.c:820) load_free_space_cache (fs/btrfs/free-space-cache.c:1017) caching_thread (fs/btrfs/block-group.c:880) btrfs_work_helper (fs/btrfs/async-thread.c:312) process_one_work worker_thread kthread ret_from_fork free-space-cache.c:420 is io_ctl_map_page(), inlined into io_ctl_check_crc() at line 565, which is why that is the frame KASAN names. The out-of-bounds slot is then treated as a struct page and handed to crc32c(), so the bad read turns into a GP fault. Add the missing check to io_ctl_check_crc(), which is where both the entry loop and the bitmap loop end up. When num_entries is too large the load now fails like any corrupt cache: __load_free_space_cache() drops it and rebuilds the free space from the extent tree, so a valid cache is never rejected.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64460

PCI/IOV: Skip VF Resizable BAR restore on read error

In the Linux kernel, the following vulnerability has been resolved: PCI/IOV: Skip VF Resizable BAR restore on read error sriov_restore_vf_rebar_state() uses the VF Resizable BAR Control register to decide how many VF BARs to restore (nbars) and which VF BAR each iteration addresses (bar_idx). bar_idx indexes into dev->sriov->barsz[], which has only PCI_SRIOV_NUM_BARS (6) entries. When a device does not respond, config reads typically return PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx both evaluate to 7. The barsz[] access then goes out of bounds. UBSAN reports this as: UBSAN: array-index-out-of-bounds in drivers/pci/iov.c:948:51 index 7 is out of range for type 'resource_size_t [6]' Observed on an NVIDIA RTX PRO 1000 GPU (GB207GLM) that stopped responding during a failed GC6 power state exit. The subsequent pci_restore_state() invoked sriov_restore_vf_rebar_state() while config reads returned 0xffffffff, triggering the splat. Bail out if any VF Resizable BAR Control read returns PCI_ERROR_RESPONSE. No further VF BARs are touched, which is safe because a config read that returns PCI_ERROR_RESPONSE indicates the device is unreachable and restoration is pointless. This mirrors the guard in pci_restore_rebar_state().

CVSS 3.1 · 7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-123263

After Effects | Heap-based Buffer Overflow (CWE-122)

After Effects is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-50735

pglogical's apply worker does not sufficiently validate the length of certain fields in incoming replication protocol messages before copying them, resulting in an out-of-bounds read. A party acting as the publisher for a subscription, for example a non-PostgreSQL endpoint that speaks the pglogical replication protocol, can return crafted messages that cause the subscriber's apply worker to read beyond the bounds of an allocated buffer, disclosing adjacent process memory or crashing the worker. To exploit the issue an attacker must be able to direct a subscription at an endpoint they control. In default installations this requires privileges normally reserved for a superuser, so the issue is most relevant to managed deployments where the ability to create subscriptions has been delegated to non-superuser roles.

CVSS 4.0 · 6.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-123668

GetPaid 2.8.63 - 2.8.64 - Unauthenticated Payment Bypass via Fractional Item Quantity

The GetPaid WordPress plugin from 2.8.63 to 2.8.64 does not ensure item quantities on its payment forms are whole numbers, allowing unauthenticated users to have an invoice for a priced item marked as paid without being charged.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Products
CVE-2026-125343

chromium-browser: Buffer overflow in Compositing

Buffer overflow in Compositing in Google Chrome prior to 157.0.8103.50 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High)

CVSS 3.1 · 8.3 High EPSS < 1% KEV · Not listed
Vendors
Products