Search vulnerabilities

Use the Query Builder to create your own search query, or check out the documentation to learn the search syntax.

Results 6,843

Export CSV
CVE-2026-74741

net: ngbe: fix NULL pointer dereference in non-MSI-X interrupt enabling

In the Linux kernel, the following vulnerability has been resolved: net: ngbe: fix NULL pointer dereference in non-MSI-X interrupt enabling In non-MSI-X mode (such as legacy INTx or single MSI), wx->msix_entry is not allocated or initialized. Calling NGBE_INTR_MISC(wx) dereferences wx->msix_entry->entry, leading to a NULL pointer dereference crash. This issue was introduced by fixing the IRQ vector when the number of VFs is 7. Fix the issue by explicitly checking `pdev->msix_enabled` to determine the correct vector index. Additionally, as a side fix, set the interrupt mask to BIT(0) for the non-MSI-X fallback. In MSI/INTx mode, the MISC and queue interrupts share vector 0, and the WX_PX_MISC_IVAR register is only valid in the MSI-X case. Thus, BIT(0) is the correct mask for the miscellaneous cause when MSI-X is disabled.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-80577

drm/panthor: skip zero-sized firmware sections

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: skip zero-sized firmware sections panthor_fw_load_section_entry() skips BO creation when the firmware section VA range is empty. If such a section is added to the firmware section list, section->mem is left as NULL. Later reload and unplug paths iterate over all firmware sections and dereference section->mem, which can lead to a NULL pointer dereference. Zero-sized firmware sections are valid, so accept them as no-op entries but skip adding them to the section list.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-48754

Incus: Nil-pointer dereference in createDependentVolumesFromBackup on disk.{Volume,VolumeSnapshots,Pool}

Incus is a system container and virtual machine manager. Prior to version 7.1.0, `(*backend).createDependentVolumesFromBackup` in `internal/server/storage/backend.go` contains a cluster of unguarded pointer derefs on every dependent-volume entry's `VolumeSnapshots[i]`, `Volume`, and `Pool` sub-fields. An authenticated user with `can_create_instances` permission on any project can crash the `incusd` daemon by uploading an instance backup tarball whose `dependent_volumes[*]` block contains a nil snapshot pointer (or omits `volume:` / `pool:`). This is a sibling-field variant of the 2026-05-04 batch fix `d768f81c0a1d985f35ae56219519822b080bf5e3` ("Properly check dependent volumes on import"). That commit added `if disk == nil` at the top of the outer loop, but did not guard the four sub-pointer fields the loop body dereferences naked. Version 7.1.0 contains an updated patch.

CVSS 4.0 · 2.1 Low EPSS < 1% KEV · Not listed
Vendors
Lxc
Products
Incus
CVE-2026-21901

Junos OS and Junos OS Evolved: Configuration of a specific SSH option results in mgd crash

A NULL Pointer Dereference vulnerability in the management daemon (mgd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, high-privileged attacker setting or deactivating a specific SSH configuration parameter to create a Denial of Service (DoS). A local high-privileged user configuring or deactivating a specific 'system services ssh' configuration parameter can exploit a null pointer dereference in one of the functions used by SSH. The function attempts to dereference a null pointer when accessing certain configuration data, resulting in an mgd process crash and restart. Continued execution of these configuration commands will create a sustained Denial of Service (DoS) condition. This issue affects: Junos OS: * from 22.3 before 22.3R3-S5; * from 22.4 before 22.4R3-S10; * from 23.2 before 23.2R2-S7; * from 23.4 before 23.4R2-S8. This issue does not affect Junos OS before 22.3R1. Junos OS Evolved: * from 22.3R1-EVO before 23.2R2-S7-EVO; * from 23.4 before 23.4R2-S8-EVO. This issue does not affect Junos OS Evolved before 22.3R1-EVO.

CVSS 4.0 · 6.7 Medium EPSS < 1% KEV · Not listed
Vendors
Juniper Juniper Networks
Products
Junos Junos Os Evolved Junos Os and 1 more
CVE-2026-80533

xfs: don't walk off the end of a null sc->sa.agi_bp in AGI repair

In the Linux kernel, the following vulnerability has been resolved: xfs: don't walk off the end of a null sc->sa.agi_bp in AGI repair LOLLM noticed a longstanding bug where xrep_iunlink_walk_ondisk_bucket tries to walk ragi->sc->sa.agi_bp to rebuild the unlinked inode lists. Unfortunately, it's possible for agi_bp to be null if the buffer verifier fails, so we have to use ragi->agi_bp (which skips verifier checks) instead.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-74738

regmap: sdw-mbq: don't call an unset readable_reg callback

In the Linux kernel, the following vulnerability has been resolved: regmap: sdw-mbq: don't call an unset readable_reg callback regmap_sdw_mbq_poll_busy() decides whether to poll the Function Busy bit by calling ctx->readable_reg(), which is a straight copy of config->readable_reg. That callback is optional: regmap_readable() treats a NULL ->readable_reg as "every register is readable", and drivers rely on that. es9356 and tac5xx2-sdw both build an MBQ regmap without one. Since commit ca1b11b36d82 ("regmap: sdw-mbq: Allow defers on undeferrable controls") the poll runs on every -ENODATA, not only for Controls the driver marked deferrable, so any of those devices answering COMMAND_IGNORED takes the kernel through a NULL function pointer. Treat a missing callback the way the rest of regmap does and poll.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-80564

gve: fix NULL dereference due to missing ptp adjfine

In the Linux kernel, the following vulnerability has been resolved: gve: fix NULL dereference due to missing ptp adjfine Fix NULL dereference due to missing implementation of adjfine, which can be triggered from usermode as follows: sudo ./testptp -d /dev/ptp0 -f 0 [ 551.943697] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] [ 552.061946] Call Trace: [ 552.064487] <TASK> [ 552.066681] ptp_clock_adjtime+0x1c0/0x2c0 [ 552.070874] ? get_clock_desc+0x6b/0xb0 [ 552.074825] pc_clock_adjtime+0x78/0xc0 [ 552.078755] __do_sys_clock_adjtime+0x85/0x110 [ 552.083293] do_syscall_64+0xea/0x610

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-80542

drm/amd/display: Fix NULL pointer dereference in amdgpu_dm_crtc_set_vblank()

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference in amdgpu_dm_crtc_set_vblank() amdgpu_dm_crtc_set_vblank() dereferences acrtc_state->stream when vblank is enabled/queried from DRM_IOCTL_MODE_CRTC_GET_SEQUENCE before a stream is attached to it. BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: amdgpu_dm_crtc_set_vblank+0x6b/0x4d0 [amdgpu] Call Trace: drm_vblank_enable drm_vblank_get drm_crtc_get_sequence_ioctl drm_ioctl_kernel drm_ioctl Reproduced by running VKCTS with WSI tests enabled on RADV. Guard the enable path on acrtc_state->stream being non-NULL, matching the existing checks in this function. (cherry picked from commit 7b1b31bf6942e6f43509b48da23f8e27269aac39)

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-55371

OpenEXR: OpenEXRCore exr_attr_set_bytes() accepts NULL type_hint with positive hint_length

OpenEXR is the reference implementation and specification for the EXR high-dynamic-range image file format, widely used in the motion picture industry. Versions 3.4.0 through 3.4.12 contain a NULL pointer dereference in the OpenEXRCore function exr_attr_set_bytes(). The public setter validates the top-level exr_attr_bytes_t value pointer but does not verify that the nested type_hint pointer is non-NULL when hint_length is greater than zero. When a caller supplies a positive hint_length together with a NULL type_hint, exr_attr_bytes_create() allocates a destination type-hint buffer and then copies from the NULL source pointer, causing a deterministic crash. The flaw is reachable through the public OpenEXRCore C API and results in a denial of service. The issue is fixed in version 3.4.13.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2026-79778

rclone before v1.75.0 Denial of Service via TUS nil-response panic

rclone before v1.75.0 contains a denial of service vulnerability in the WebDAV TUS creation handler that dereferences a nil response before checking for transport errors. A malicious or compromised configured endpoint can reset connections during TUS uploads to trigger a panic that terminates unrecovered goroutines and halts unrelated work in long-lived processes.

CVSS 4.0 · 6 Medium EPSS < 1% KEV · Not listed
Vendors
Rclone
Products
Rclone
CVE-2026-63380

Libevent: Null Pointer Dereference in `evws_new_session`

Libevent is an event notification library. Prior to 2.2.2-alpha, libevent can dereference invalid list pointers in ws.c when evws_new_session enters its error path after evhttp_start_ws_ succeeds but bufferevent_enable_locking_ fails. evws_connection_free sees a non-null http_server and unconditionally calls TAILQ_REMOVE even though the session was never inserted into http_server->ws_sessions. A local caller able to induce this allocation or locking failure can crash the process. This issue is fixed in version 2.2.2-alpha.

CVSS 4.0 · 5.7 Medium EPSS < 1% KEV · Not listed
Vendors
Libevent Project
Products
Libevent
CVE-2026-76905

kin-openapi openai3filter: nil-pointer panic in ConvertErrors on malformed multipart/form-data body enables unauthenticated DoS

kin-openapi is a Go project for handling OpenAPI files. From 0.10.0 until 0.141.0, openapi3filter.convertParseError in openapi3filter/validation_error_encoder.go dereferences e.Parameter.In without checking whether e.Parameter is nil. A malformed non-string scalar field in a multipart/form-data request body produces a nested ParseError with a nil RequestError.Parameter, and applications that render the validation error through openapi3filter.ConvertErrors or ValidationErrorEncoder panic. An unauthenticated client can repeatedly send such requests to deny service when the application lacks a recovery boundary. JSON request bodies and applications that do not use these error-rendering helpers are not affected. This issue is fixed in version 0.141.0.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Getkin
Products
Kin-openapi
CVE-2026-17009

Vulnerabilities in IBM AIX and PowerVM VIOS

IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to cause a denial of service due to a NULL pointer dereference.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Ibm
Products
Aix Powervm Vios Vios
CVE-2026-17165

Vulnerabilities in IBM AIX and PowerVM VIOS

IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to a NULL pointer dereference.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Ibm
Products
Aix Powervm Vios Vios
CVE-2026-74702

vhost-scsi: reject feature changes after endpoint

In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: reject feature changes after endpoint vhost_scsi_setup_vq_cmds() runs from VHOST_SCSI_SET_ENDPOINT and allocates each command's protection scatterlist array (prot_sgl) according to the acknowledged VIRTIO_SCSI_F_T10_PI bit. The command pools are not rebuilt when VHOST_SET_FEATURES changes that bit later. Although virtio feature bits must not change after feature negotiation, vhost_scsi_set_features() currently accepts such a request after the endpoint is active and updates acked_features. Enabling T10-PI after endpoint setup therefore leaves prot_sgl NULL while the I/O path follows the new feature bit. For a 129-page protection payload, vhost_scsi_mapal() passes the missing first chunk to sg_alloc_table_chained(): sg_alloc_table_chained(table, 129, first_chunk=NULL, nents_first_chunk=inline_sg_cnt) sg_pool_index() then hits: BUG_ON(nents > SG_CHUNK_SIZE); /* 129 > 128 */ The kernel reported the following call trace and register state: Call Trace: <TASK> ? __sg_alloc_table+0x1d8/0x250 ? __pfx_vhost_run_work_list+0x10/0x10 [vhost] sg_alloc_table_chained+0x59/0xf0 ? __pfx_sg_pool_alloc+0x10/0x10 ? vhost_scsi_calc_sgls.constprop.0+0x43/0x60 [vhost_scsi] vhost_scsi_handle_vq+0xf02/0x1700 [vhost_scsi] ? __pfx_vhost_scsi_handle_vq+0x10/0x10 [vhost_scsi] vhost_scsi_handle_kick+0x37/0x50 [vhost_scsi] vhost_run_work_list+0x8e/0xd0 [vhost] vhost_task_fn+0xe1/0x210 ret_from_fork+0x348/0x540 </TASK> RIP: 0010:0x4 CR2 = 0x4 RSP: 0018:ffffc90000dbf940 EFLAGS: 00010202 RAX: ffffffff82396810 RBX: ffff88811dc28b80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000081 VHOST_F_LOG_ALL is a vhost-specific runtime feature and remains the only exception. Reject changes to any feature other than VHOST_F_LOG_ALL while the endpoint is active. This preserves the existing runtime log toggle while preventing feature-dependent command resources and data-path state from becoming inconsistent. Userspace must clear the endpoint before changing any other negotiated feature and set the endpoint up again afterward.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-76014

BusyBox FEATURE_WGET_TIMEOUT wget.c null pointer dereference

A vulnerability has been found in BusyBox up to 1.30.1. This vulnerability affects unknown code of the file networking/wget.c of the component FEATURE_WGET_TIMEOUT Handler. Such manipulation of the argument -T leads to null pointer dereference. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The name of the patch is 83a40bf7a93c8ac093d33ab452222dd5b9eb57ff. A patch should be applied to remediate this issue.

CVSS 4.0 · 4.8 Medium EPSS < 1% KEV · Not listed
Vendors
Busybox
Products
Busybox
CVE-2026-13213

Bluetooth HAS: NULL-pointer dereference DoS when a bonded peer reconnects before bt_has_register

The Hearing Access Service (HAS) GATT server in subsys/bluetooth/audio/has.c installs a connection-callback set unconditionally via BT_CONN_CB_DEFINE, so security_changed() runs for every connection that establishes security even before the application has called bt_has_register(). The service attribute pointers hearing_aid_features_attr, preset_control_point_attr, and active_preset_index_attr remain NULL until bt_has_register() resolves them and sets has.registered. With CONFIG_BT_SETTINGS, settings_set_cb() restores each bonded client's persisted context at boot and unconditionally sets context->flags to BONDED_CLIENT_INIT_FLAGS (non-zero). When a previously bonded peer reconnects and re-establishes security during the startup window before bt_has_register() has been called, security_changed() sees the non-zero flags and schedules notify_work_handler, which calls bt_gatt_is_subscribed() with a still-NULL attribute pointer. That triggers an assertion (__ASSERT(attr, ...) in bt_gatt_is_subscribed()), or a NULL dereference of attr->uuid when assertions are compiled out. The result is a remotely triggerable (Bluetooth, adjacent) crash of the HAS peripheral. Exploitation requires the peer to have previously bonded with the device and to reconnect within the boot-time race window before the application registers the service; a peer that reconnects persistently can prolong the outage. Impact is denial of service only, with no memory corruption or information disclosure. The fix adds an early if (!has.registered) { return; } guard in security_changed(), so no notification work is scheduled until the GATT service is registered and its attribute pointers are valid.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Zephyrproject
Products
Zephyr
CVE-2026-71922

DrayTek VigorSwitch Multiple Models Pre-Authentication NULL Pointer Dereference via setget.cgi

Multiple DrayTek VigorSwitch models contain a pre-authentication null pointer dereference vulnerability in the setget.cgi interface. The vulnerability is caused by missing validation when the pass field is absent. A remote attacker can trigger this vulnerability via a crafted request to crash the service and cause a denial of service.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Draytek
Products
Vigorswitch Fx2120 Firmware Vigorswitch G1282 Firmware Vigorswitch G2100 Firmware and 11 more
CVE-2026-71920

DrayTek VigorSwitch Multiple Models NULL Pointer Dereference via formlogout

Multiple DrayTek VigorSwitch models contain a null pointer dereference vulnerability in the formlogout function. The vulnerability is caused by missing checks for an empty or absent Cookie header before string handling. A remote attacker can trigger this vulnerability via a crafted request to crash the service and cause a denial of service. Exploitation requires valid administrative credentials for the device's web management interface.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Draytek
Products
Vigorswitch Fx2120 Firmware Vigorswitch G1282 Firmware Vigorswitch G2100 Firmware and 11 more
CVE-2026-78148

ggml-org llama.cpp ggml-RPC Server ggml-rpc.cpp graph_compute null pointer dereference

A vulnerability was determined in ggml-org llama.cpp bec4772f6. This affects the function rpc_server::graph_compute of the file ggml/src/ggml-rpc/ggml-rpc.cpp of the component ggml-RPC Server. Executing a manipulation can lead to null pointer dereference. The attack may be launched remotely. The pull request to fix this issue awaits acceptance.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Ggml-org
Products
Llama.cpp