pyasn1: Uncontrolled resource consumption when converting decoded REAL values

pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.4, the univ.Real type converted its mantissa, base, and exponent value to a Python float using exact big-integer exponentiation. A BER, CER, or DER encoded REAL value only a few bytes long can carry a very large exponent, causing float conversion through prettyPrint(), str(), comparison, arithmetic, int(), or an explicit float() call to consume excessive CPU and memory and hang applications that decode untrusted ASN.1 data and then print, log, or compare decoded objects. This issue is fixed in version 0.6.4.

Pillow: Decompression Bomb DoS via PdfParser.PdfStream.decode()

Pillow is a Python imaging library. From 5.1.0 until 12.3.0, PdfParser.PdfStream.decode() in PIL/PdfParser.py calls zlib.decompress() with bufsize set to the PDF stream Length field without bounding the decompressed output size, allowing a crafted FlateDecode PDF stream to exhaust memory from a small file. This issue is fixed in version 12.3.0.

HedgeDoc: Denial-of-service via YAML alias expansion in note frontmatter

HedgeDoc is an open source, real-time, collaborative, markdown notes application. Prior to version 1.11.0, HedgeDoc was vulnerable to a YAML alias bomb due to unsafe processing of the note frontmatter. HedgeDoc parsed frontmatter with js-yaml.load (js-yaml v3) via @hedgedoc/meta-marked, which resolved YAML anchor aliases. A compact malicious payload could therefore expand into a huge object structure, consuming excessive CPU. This expansion ran on every request to the publish view (/s/<shortid>) and, when placed under the opengraph key, the editor view (/<noteId>). A ten-level alias bomb could block the single Node.js event loop for roughly 235 seconds per request, causing concurrent requests to hang or drop and rendering the instance unavailable (DoS). Because the note was stored in the database, the impact survived process restarts until the note was removed. toobusy-js did not reliably mitigate the worst cases, as the event loop was saturated before the middleware could respond. This issue was fixed in version 1.11.0.

NanaZip: Unbounded memory allocation (DoS) in NanaZip WebAssembly parser via attacker-controlled section/name length fields

NanaZip is the 7-Zip derivative intended for the modern Windows experience. Prior to 6.5.1749.0, NanaZip's WebAssembly archive handler in NanaZip.Codecs.Archive.WebAssembly.cpp allocates buffers from attacker-controlled 32-bit section and custom-name length fields without validating them against the data present in the file. A tiny crafted module can force multi-gigabyte allocations during listing or extraction through NameSize, Information.Size, and std::string or vector allocation paths, causing memory exhaustion or process termination. This issue is fixed in version 6.5.1749.0.

Excelize: Streaming GetRows row-bound bypass causes attacker-controlled allocation

Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. Prior to 2.11.0, the streaming worksheet reader used by Rows and GetRows does not enforce the TotalRows limit on the row r attribute, allowing a small XLSX file with a row number above 1048576 and no cell coordinate to make GetRows append empty rows up to the attacker-controlled index and consume excessive memory and CPU. This issue is fixed in version 2.11.0.

NanaZip: Uncaught exception / unbounded allocation in NanaZip .NET single-file Extract() via unvalidated entry Size

NanaZip is the 7-Zip derivative intended for the modern Windows experience. Prior to 6.5.1749.0, NanaZip's .NET single-file bundle handler in NanaZip.Codecs.Archive.DotNetSingleFile.cpp sizes its extraction buffer from the bundle entry Size field, which is only checked for sign and is not validated against the real file size. A crafted bundle can cause an attacker-chosen allocation inside Extract, where std::bad_alloc or std::length_error can escape across the COM STDMETHODCALLTYPE boundary and crash the process. This issue is fixed in version 6.5.1749.0.

Host-triggerable control-endpoint wedge (DoS) in Nuvoton NuMaker HSUSBD UDC driver

The Nuvoton NuMaker HSUSBD USB device-controller driver (drivers/usb/udc/udc_numaker.c) armed the control Data IN stage unconditionally (base->CEPTXCNT = len in numaker_hsusbd_ep_trigger). Because the HSUSBD hardware cannot disarm a control Data IN already armed for a previous transfer, a USB host that cancels an in-flight control transfer (timeout) and then issues a new SETUP packet can drive the driver out of sync: stale data may be transmitted in the new transfer and the control endpoint can become permanently stuck NAK'ing every subsequent control transfer. A malicious or buggy host (physical/adjacent attacker driving the bus) can repeatedly cancel-and-re-SETUP to wedge the device's USB control endpoint, denying service to the device's USB function (the device stops enumerating/responding on the control pipe) until a USB reset or re-plug. The flaw is an availability-only denial of service; the FIFO copy loops (bounded by net_buf length and the hardware BUFFULL flag) and the net_buf lifecycle are independent of the arming desync, so there is no out-of-bounds access, use-after-free, or information leak. The fix monitors the IN-token and new-SETUP events (k_event) and only arms control Data IN when an IN token is present and no new SETUP has arrived, cancelling the current transfer on a new SETUP. Affects boards using the Nuvoton NuMaker HSUSBD controller (CONFIG_UDC_NUMAKER with DT_HAS_NUVOTON_NUMAKER_HSUSBD_ENABLED); shipped in v4.4.0.

Tempo query limit results in unbounded memory allocation

Tempo queries with large limits can cause large memory allocations which can impact the availability of the service, depending on its deployment strategy. Mitigation can be done by setting max_result_limit in the search config, e.g. to 262144 (2^18). Alternatively, automatically restart the service.

NanaZip: Unbounded memory allocation (DoS) in NanaZip UFS parser via unvalidated fs_bsize/fs_fsize superblock fields

NanaZip is the 7-Zip derivative intended for the modern Windows experience. Prior to 6.5.1749.0, NanaZip's UFS and FFS image handler in NanaZip.Codecs.Archive.Ufs.cpp validates the superblock block size only against the MINBSIZE lower bound and does not validate the fs_fsize fragment size, allowing attacker-controlled 32-bit fields to flow into indirect-block, directory, and extraction buffer allocations. A tiny crafted UFS image can force multi-gigabyte allocations during open or extraction, causing memory exhaustion or process termination. This issue is fixed in version 6.5.1749.0.

Pre-authentication denial of service in the public dashboard query endpoint

The public dashboard query endpoint does not limit request body size before processing, allowing unauthenticated attackers to trigger excessive memory allocation by sending arbitrarily large JSON payloads. This can lead to denial of service through memory exhaustion. No valid dashboard access token or authentication is required to exploit this vulnerability.

Apache IoTDB: Unauthenticated unbounded recursion in IoTDB AirGap receiver's E-language prefix parser causes per-connection StackOverflowError

Uncontrolled Recursion, Uncontrolled Resource Consumption vulnerability in Apache IoTDB. When pipe_air_gap_receiver_enabled=true, the IoTDB AirGap receiver's readLength method calls itself recursively each time it recognises the E-language prefix in socket data, with no depth limit. An unauthenticated attacker can send a stream of repeated E-language prefixes that drives the recursion arbitrarily deep, exhausting the receiver thread's JVM stack and raising StackOverflowError. This issue affects Apache IoTDB: from 1.0.0 before 2.0.10. Users are recommended to upgrade to version 2.0.10, which fixes the issue.

NATS Server: MQTT partial CONNECT packets can exhaust pre-auth memory

NATS Server is a high-performance server for NATS.io, the cloud and edge native messaging system. Prior to 2.14.3 and 2.12.12, an unauthenticated MQTT client could cause the server to retain large incomplete MQTT CONNECT packets before authentication completed, consuming server memory while the parser waited for the advertised MQTT packet length. This issue is fixed in versions 2.14.3 and 2.12.12.

Micronaut Framework: Unbounded formattersCache in TimeConverterRegistrar Allows Memory Exhaustion via Accept-Language Header

Micronaut Framework is a JVM-based full stack Java framework designed for building modular, easily testable JVM applications. From 4.3.0 to before 4.10.22, 3.10.6, and 3.8.14, TimeConverterRegistrar caches DateTimeFormatter instances in an unbounded ConcurrentHashMap<String, DateTimeFormatter> whose key is derived from the @Format annotation pattern concatenated with the locale from the HTTP Accept-Language header. Because Locale.forLanguageTag() accepts arbitrary BCP 47 private-use extensions (en-x-a001, en-x-a002, …), an unauthenticated attacker can generate an unlimited number of unique cache keys by sending requests with novel locale tags, growing the cache until heap memory is exhausted and the JVM crashes. This vulnerability is fixed in 4.10.22, 3.10.6, and 3.8.14.

CoreWCF: Pre-authentication infinite-loop CPU exhaustion in CoreWCF net.tcp / net.pipe / net.uds framing handshake

CoreWCF is a port of the service side of Windows Communication Foundation (WCF) to .NET Core. Prior to 1.8.1 and 1.9.1, an unauthenticated remote attacker that can reach a NetTcpBinding, NetNamedPipeBinding, or UnixDomainSocketBinding endpoint can trigger premature EOF handling in the CoreWCF net.tcp, net.pipe, or net.uds framing handshake and pin one server thread-pool worker at full CPU per connection. This issue is fixed in versions 1.8.1 and 1.9.1.

Gitea git grep search lacks a timeout

Gitea versions before 1.25.5 do not enforce a timeout on git grep searches, allowing expensive searches to consume server resources.

In HotelDruid 3.0.0 and 3.0.7, the unauthenticated database-setup endpoint creadb.php can be reached before setup is completed and performs database creation without locking. By sending many concurrent requests, an attacker can trigger a race condition during which verbose SQL error messages disclose the administrator username, password hash, and salt. The same race leaves the setup partially initialized, so the administrator can no longer log in with the credentials set during installation, resulting in a denial of service that requires reinstallation to recover. Remote exploitation additionally requires the installation to allow non-localhost access. The vulnerability was fixed in version 3.0.8.

NestedSecretsSettingsSource follows symlinks outside secrets_dir, enabling local file read and bypassing secrets_dir_max_size

pydantic-settings provides settings management using Pydantic. From 2.12.0 until 2.14.2, NestedSecretsSettingsSource reads secret values from files in a configured secrets_dir. When secrets_nested_subdir=True, a directory entry inside secrets_dir that is a symbolic link pointing outside secrets_dir is followed, so files outside the configured directory are read into settings values. The same code path bypasses the documented secrets_dir_max_size protection. An attacker or lower-privileged component able to influence entries in the configured secrets directory (for example, a writable or shared secrets mount) can turn this into an unintended local file read into settings and can defeat the advertised loading-size cap. This vulnerability is fixed in 2.14.2.

Immutable.js `List` 32-bit trie overflow → unrecoverable DoS

Immutable.js provides many Persistent Immutable data structures. Prior to 4.3.9 and 5.1.8, List#set, List#setSize, List#setIn, List#updateIn, and the functional set, setIn, and updateIn mishandle an index or size in the range 2 ** 30 to 2 ** 31 in setListBounds in src/List.js, causing an empty List to enter an uncatchable infinite loop, a populated List to allocate without bound until process abort, or setSize to silently wrap large values. This issue is fixed in versions 4.3.9 and 5.1.8.

vLLM speech-to-text endpoints allocate full upload before enforcing the audio file-size limit

vLLM is an inference and serving engine for large language models. From 0.22.0 to 0.23.0, the /v1/audio/transcriptions and /v1/audio/translations routes call request.file.read() to fully materialize an uploaded audio file into memory before vLLM checks the documented VLLM_MAX_AUDIO_CLIP_FILESIZE_MB compressed upload size limit (default 25 MB) later in the speech-to-text preprocessing step, so an API caller who can reach those routes can submit an oversized multipart upload and cause vLLM to allocate memory proportional to the uploaded file size before the request is rejected as too large, creating memory pressure or terminating the process depending on deployment resource limits. This issue is fixed in version 0.24.0.

Wasmtime: Leak in WASIp1 `fd_renumber` implementation

Wasmtime is a runtime for WebAssembly. All versions prior to 24.0.10; versions 25.0.0 through those before 36.0.11; versions 37.0.0 through those before 44.0.3; and versions 45.0.0 and 45.0.1 contain a native implementation of WASIp1 which suffers from a leak in the fd_renumber function where the file descriptor being renumbered to is not properly closed. Wasmtime's implementation erroneously only updated the table of descriptors for WASIp1 and didn't update the underlying table of descriptors used by the host. This behavior means that while fd_renumber works correctly from a guest's perspective it ends up leaking resources in the host that aren't cleaned up until the corresponding Store is destroyed. In a loop, guests can use fd_renumber to cause hosts to exhaust both resources and file descriptors. This bug only affects the native implementation of WASIp1, meaning that only runtimes which load core wasm modules and expose fd_renumber are affected. Runtimes are additionally only affected if they expose the ability to acquire a file descriptor, such as opening a file. For runtimes that deny access to files they are unaffected. This issue has been fixed in versions 24.0.10, 36.0.11, 44.0.3, and 45.0.2.