bpf: use kvfree() for replaced sysctl write buffer

In the Linux kernel, the following vulnerability has been resolved: bpf: use kvfree() for replaced sysctl write buffer proc_sys_call_handler() allocates its temporary sysctl buffer with kvzalloc() and passes it to __cgroup_bpf_run_filter_sysctl(). Since kvzalloc() may fall back to vmalloc() for large allocations, freeing that buffer with kfree() is wrong and can corrupt memory. Use kvfree() to safely handle both kmalloc and kvzalloc()/vmalloc allocations. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc5. Reproduced the bug based on v7.1-rc4 in a QEMU x86_64 guest booted with KASAN and CONFIG_FAILSLAB enabled. To exercise the replacement path, the test tree also included the accompanying fix for the stale ret == 1 check in __cgroup_bpf_run_filter_sysctl(). The reproducer confines failslab injections to the proc_sys_call_handler() range, uses stacktrace-depth=32, and injects fail-nth=1 while writing 8191 bytes to /proc/sys/kernel/domainname from a task in the target cgroup. Under that setup, fail-nth=1 triggered the fault: BUG: unable to handle page fault for address: ffffeb0200024d48 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 SMP KASAN NOPTI CPU: 2 UID: 0 PID: 209 Comm: repro_proc_sys_ Not tainted 7.1.0-rc4-00686-g97625979a5d4 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:kfree+0x6e/0x510 ... Call Trace: <TASK> ? __cgroup_bpf_run_filter_sysctl+0x626/0xc30 __cgroup_bpf_run_filter_sysctl+0x74d/0xc30 ? __pfx___cgroup_bpf_run_filter_sysctl+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? __kvmalloc_node_noprof+0x345/0x870 ? proc_sys_call_handler+0x250/0x480 ? srso_return_thunk+0x5/0x5f proc_sys_call_handler+0x3a2/0x480 ? __pfx_proc_sys_call_handler+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? selinux_file_permission+0x39f/0x500 ? srso_return_thunk+0x5/0x5f ? lock_is_held_type+0x9e/0x120 vfs_write+0x98e/0x1000 ... </TASK> With this fix applied on top of the same test setup, rerunning the reproducer with fail-nth=1 yields no corresponding Oops reports.

Photoshop Desktop | Out-of-bounds Write (CWE-787)

Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Photoshop Desktop | Out-of-bounds Write (CWE-787)

Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Sharp before 0.35.4 RCE via bundled libheif AVIF decoding

Sharp before 0.35.4 bundles a vulnerable libheif dependency that allows attackers to achieve possible remote code execution on glibc-based Linux by supplying crafted images. Attackers can submit malicious AVIF/HEIF input to applications processing untrusted images with sharp, triggering libheif decoding flaws to execute code.

UEFI OOB Write and Buffer Overflow Vulnerabilities

AMI APTIOV contains vulnerabilities in BIOS where users may cause  "Out-of-bounds Write” by local access. Successful exploitation of this vulnerability could lead to buffer overflows, memory corruption, and arbitrary code execution, and also impact Confidentiality, Integrity, and Availability.

scsi: target: iscsi: Validate CHAP_R length before base64 decode

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Validate CHAP_R length before base64 decode chap_server_compute_hash() allocates client_digest as kzalloc(chap->digest_size) and then, for BASE64-encoded responses, passes chap_r directly to chap_base64_decode() without checking whether the input length could produce more than digest_size bytes of output. chap_base64_decode() writes to the destination unconditionally as long as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and the "0b" prefix stripped by extract_param(), up to 127 base64 characters can reach the decoder. 127 characters decode to 95 bytes. For SHA-256 (digest_size=32) this overflows client_digest by 63 bytes; for MD5 (digest_size=16) the overflow is 79 bytes. The length check at line 344 fires after the write has already happened. The HEX branch in the same switch statement already validates the length up front. Apply the same approach to the BASE64 branch: strip trailing base64 padding characters, then reject any input whose data length exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder. Stripping trailing '=' before the comparison handles both padded and unpadded encodings. chap_base64_decode() already returns early on '=', so the full original string is still passed to the decoder unchanged. The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1 base64 characters reach the decoder. The maximum decoded size, DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is added at the call site to document this.

A stack-based buffer overflow vulnerability in Fortinet FortiOS 7.4.0 through 7.4.3, FortiOS 7.2.0 through 7.2.7, FortiOS 7.0.0 through 7.0.14, FortiOS 6.4 all versions, FortiOS 6.2 all versions, FortiOS 6.0 all versions, FortiPAM 1.2 all versions, FortiPAM 1.1 all versions, FortiPAM 1.0 all versions, FortiProxy 7.4.0 through 7.4.3, FortiProxy 7.2.0 through 7.2.9, FortiProxy 7.0.0 through 7.0.16, FortiProxy 2.0 all versions, FortiProxy 01.02 all versions, FortiProxy 1.2 all versions, FortiProxy 01.01 all versions, FortiProxy 1.1 all versions, FortiProxy 01.00 all versions, FortiSwitchManager 7.2.0 through 7.2.3, FortiSwitchManager 7.0.1 through 7.0.3 allows attacker to execute unauthorized code or commands via specially crafted packets.

A out-of-bounds write vulnerability in Fortinet FortiOS 7.4.0 through 7.4.2, FortiOS 7.2.0 through 7.2.6, FortiOS 7.0.0 through 7.0.13, FortiOS 6.4.0 through 6.4.14, FortiOS 6.2.0 through 6.2.15, FortiOS 6.0 all versions, FortiProxy 7.4.0 through 7.4.2, FortiProxy 7.2.0 through 7.2.8, FortiProxy 7.0.0 through 7.0.14, FortiProxy 2.0.0 through 2.0.13, FortiProxy 01.02 all versions, FortiProxy 1.2 all versions, FortiProxy 01.01 all versions, FortiProxy 1.1 all versions, FortiProxy 01.00 all versions allows attacker to execute unauthorized code or commands via specifically crafted requests

A out-of-bounds write vulnerability in Fortinet FortiOS 7.2.0 through 7.2.3, FortiOS 7.0.0 through 7.0.10, FortiOS 6.4.0 through 6.4.11, FortiOS 6.2.0 through 6.2.13, FortiOS 6.0.0 through 6.0.16, FortiProxy 7.2.0 through 7.2.1, FortiProxy 7.0.0 through 7.0.7, FortiProxy 2.0 all versions, FortiProxy 01.02 all versions, FortiProxy 1.2 all versions, FortiProxy 01.01 all versions, FortiProxy 1.1 all versions, FortiProxy 01.00 all versions allows an authenticated attacker to execute unauthorized code or commands via specifically crafted requests.

Ghidra 10.2 through 12.1.4 Denial of Service via ELF Loader Extended Header Counts

Ghidra 10.2 through 12.1.4 contains a denial of service vulnerability in the ELF loader's ElfHeader class that allocates arrays sized by unvalidated extended section and program header counts. Attackers can supply a crafted 128-byte ELF file that triggers an OutOfMemoryError during load-spec discovery at import or in headless analysis pipelines.

virtualenv bash activate runs commands from an environment name with a backslash before $

virtualenv is a tool for creating isolated virtual python environments. Prior to 21.14.7, the bash activate script escapes the environment name for only one of the two passes bash makes over PS1, so a backslash in the name undoes the escaping and a name containing \$(...) runs as commands in the user's shell each time bash draws the prompt. This issue is fixed in version 21.14.7.

ImageMagick: Heap Buffer Over-Write in EXR decoder

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-32, a crafted EXR image can cause the EXR decoder to write beyond a heap buffer, causing the process to crash. This issue is fixed in version 7.1.2-32.

libbluray through 1.5.1 Uncontrolled Memory Allocation via _parse_extent_start_points

VideoLAN libbluray through 1.5.1 contains an uncontrolled memory allocation vulnerability in _parse_extent_start_points() in clpi_parse.c that trusts the num_point field without bounds checking. Attackers can supply a crafted .clpi file on a disc, image, or directory with a huge num_point to exhaust memory and CPU, causing denial of service.

Television 0.15.0 through 0.15.9 OS Command Injection via External Action Formatting

Television (tv) 0.15.0 through 0.15.9 contains an OS command injection vulnerability that allows attackers to run shell commands through improperly escaped single quotes in format_command. Attackers can plant a file with a crafted name containing an apostrophe so that triggering an action like the default edit action executes commands with victim privileges.

libLAS through 1.8.1 Heap Out-of-Bounds Write via LASSchema VLR

libLAS through 1.8.1 contains a heap out-of-bounds write vulnerability in the point record reader caused by truncating the schema byte size to 16 bits when sizing the point buffer. Attackers can craft a .las file with a LASSchema variable length record whose schema exceeds 65535 bytes, so tools like lasinfo, las2las, or las2txt write attacker-controlled bytes past the heap buffer, causing memory corruption and crashes.

Claude Agent SDK: Argument Injection via resume Option Allows Arbitrary Command Execution

Claude Agent SDK is a Python SDK for Claude Code. Prior to 0.2.121, the resume option is passed to the Claude CLI as a separate token without validation, so a dash-leading value is parsed as an independent CLI flag. An attacker can inject the --mcp-config flag to define a stdio MCP server, causing arbitrary command execution at CLI startup outside the SDK permission controls. The issue is exploitable when an application passes untrusted input as the session ID to resume. This issue is fixed in version 0.2.121.

odt2spip < 4.4.0 OS Command Injection via Document Filename

odt2spip plugin for SPIP before 4.4.0 contains an OS command injection vulnerability that allows authenticated authors to execute arbitrary commands by uploading a document with a maliciously crafted filename through the document import form. Attackers can embed shell metacharacters such as $(id) in a non-.odt filename, which survives insufficient sanitization in odt2spip_deplacer_fichier_upload() and LibreOffice::createCommand(), to achieve remote code execution as the web-server user during the LibreOffice conversion process.

Adobe Framemaker | Out-of-bounds Write (CWE-787)

Adobe Framemaker is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

rovr through 0.10.3 OS Command Injection via Unquoted Path to cmd.exe

Rovr through 0.10.3 on Windows contains an OS command injection vulnerability that allows attackers to execute commands by crafting malicious file names. Attackers can deliver a file named with shell metacharacters like & alongside a payload, which runs with user privileges when the file is opened through open_file.

@mborne/extract before 0.2.1 OS Command Injection via archivePath and targetDir

@mborne/extract before 0.2.1 contains an OS command injection vulnerability that allows attackers to execute commands by supplying shell metacharacters in archivePath or targetDir options. Attackers controlling these values passed to extract() can inject commands into unquoted shelljs exec() strings in the unzip, 7z, tar-bz2 and gz extractors, running them with Node.js process privileges.