netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can lead to the use of wrong `CIDR_POS(c)` for calculating array offsets, which can lead to integer underflow. As a result, it leads to slab out-of-bound access. This patch adds back the IP_SET_HASH_WITH_NET0 macro to ip_set_hash_netportnet to address the issue.

perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output syzkaller reportes a KASAN issue with stack-out-of-bounds. The call trace is as follows: dump_stack+0x9c/0xd3 print_address_description.constprop.0+0x19/0x170 __kasan_report.cold+0x6c/0x84 kasan_report+0x3a/0x50 __perf_event_header__init_id+0x34/0x290 perf_event_header__init_id+0x48/0x60 perf_output_begin+0x4a4/0x560 perf_event_bpf_output+0x161/0x1e0 perf_iterate_sb_cpu+0x29e/0x340 perf_iterate_sb+0x4c/0xc0 perf_event_bpf_event+0x194/0x2c0 __bpf_prog_put.constprop.0+0x55/0xf0 __cls_bpf_delete_prog+0xea/0x120 [cls_bpf] cls_bpf_delete_prog_work+0x1c/0x30 [cls_bpf] process_one_work+0x3c2/0x730 worker_thread+0x93/0x650 kthread+0x1b8/0x210 ret_from_fork+0x1f/0x30 commit 267fb27352b6 ("perf: Reduce stack usage of perf_output_begin()") use on-stack struct perf_sample_data of the caller function. However, perf_event_bpf_output uses incorrect parameter to convert small-sized data (struct perf_bpf_event) into large-sized data (struct perf_sample_data), which causes memory overwriting occurs in __perf_event_header__init_id.

be2net: Fix buffer overflow in be_get_module_eeprom

In the Linux kernel, the following vulnerability has been resolved: be2net: Fix buffer overflow in be_get_module_eeprom be_cmd_read_port_transceiver_data assumes that it is given a buffer that is at least PAGE_DATA_LEN long, or twice that if the module supports SFF 8472. However, this is not always the case. Fix this by passing the desired offset and length to be_cmd_read_port_transceiver_data so that we only copy the bytes once.

DevIL through 1.8.0 Heap Buffer Overflow via GIF iGetPalette

DevIL through 1.8.0 contains a heap-based buffer overflow in iGetPalette() in il_gif.cpp that allows attackers to write beyond a 768-byte palette buffer when loading GIF images. Attackers can supply a crafted two-frame GIF whose second frame uses disposal method 1 with a local colour table, writing up to 384 controlled bytes past the heap allocation and possibly executing code.

Out-of-bounds write in Progress MarkLogic Server

Progress MarkLogic Server 12.x releases before 12.1.0 and 11.x releases before 11.3.7 contain an out-of-bounds write vulnerability in certain language-processing functionality. A remote authenticated attacker could exploit this vulnerability to cause server instability or limited modification of data.

Uncontrolled Out‑of‑Bounds Write in NVIDIA DALI Leading to Denial of Service, Information Disclosure, and Data Tampering

NVIDIA DALI contains a vulnerability where an attacker could cause an uncontrolled out-of-bounds write. A successful exploit of this vulnerability might lead to denial of service, information disclosure, and data tampering.

FluidSynth through 2.6.1 Out-of-Bounds Write via SoundFont Modulator Destination

FluidSynth through 2.6.1 contains an out-of-bounds write vulnerability that allows attackers to corrupt heap and stack memory by supplying unvalidated SoundFont modulator destination values. Attackers can craft an SF2 file with PMOD/IMOD destinations of 63 to 255 that, when loaded and played, write past the voice generator array and updated_gen_bit, causing memory corruption and crashes.

MuJS 1.3.6 before 1.3.9 Heap Out-of-Bounds Read/Write via Array.prototype.sort

MuJS 1.3.6 before 1.3.9 contains a heap out-of-bounds read and write vulnerability in Array.prototype.sort that allows attackers to corrupt memory by inflating a simple array's length. Attackers can supply JavaScript that enlarges a dense array's length and calls sort, causing Ap_sort_cmp and Ap_sort_swap to access slots past the buffer and crash the process.

Memory Corruption in FFmpeg RTP Encoding Leading to Potential Remote Code Execution

A memory corruption vulnerability exists in FFmpeg before 8.1. The RTP encoding process. In the nal_send function in libavformat/rtpenc_h264_hevc.c, a negative size parameter (size=-3) is passed to memcpy when transmitting H.264/HEVC streams via RTP using a crafted input file. This was detected using AddressSanitizer.

Out-of-bounds write in LR11xx Transceiver

An out-of-bounds write vulnerability in the SPI host command interface of Semtech's LR11xx transceiver firmware where a crafted SPI host command with an oversized length field can cause the firmware to write up to 254 arbitrary bytes past the bounds of an internal, non-persistent memory buffer. Exploitation requires physical access to the device and logical access to the SPI bus.

Out-of-bounds write in the NXP MCUX TRNG entropy driver for non-word-multiple request lengths

The NXP MCUX TRNG entropy driver in drivers/entropy/entropy_mcux_trng.c passed the caller's byte count straight to the vendor SDK routine TRNG_GetRandomData(). On i.MX RT5xx and RT6xx parts the SDK compiles its TRNG_SW_HEALTH_TESTS variant, which always copies whole 32-bit words and draws entropy rounded up to a multiple of 128 bytes. Its "caller buffer is full" guard tests dataSize == 0, so a request whose length is not a multiple of four makes dataSize underflow past zero and the SDK keeps writing into the caller's buffer for the entire extraction: a 1-byte request results in 128 bytes written, and any non-word-multiple length overflows by up to 127 bytes. entropy_get_entropy() is a syscall, and its verifier in drivers/entropy/entropy_handlers.c validates only the requested length via K_SYSCALL_MEMORY_WRITE(). With CONFIG_USERSPACE enabled, an unprivileged user-mode thread that has merely been granted the entropy device can therefore choose both the destination address and a length such as 1, and cause the kernel to write up to 127 bytes beyond the region it proved it owns. On these Cortex-M33 targets there is no MMU, so user partitions and kernel data share one SRAM and the overflow can land in adjacent kernel state. The same defect is reached from kernel mode by any caller requesting a non-word-multiple length, including getentropy() and, in builds where sys_csrand_get()/sys_rand_get() resolve to the hardware generator, sys_rand8_get() and sys_rand16_get(). Impact is memory corruption of up to 127 bytes immediately following the supplied buffer — typically the caller's stack in kernel-mode use, or memory outside the caller's partition when driven through the syscall. The overflow offset is fully determined by the requested length and is therefore deterministic, while the written content is uncontrolled TRNG output; the practical consequences range from crashes and unpredictable state corruption to opportunistic escalation when kernel bookkeeping such as object permission bitmaps is overwritten. The affected devices are those where the MCUX SDK enables TRNG_SW_HEALTH_TESTS (MIMXRT595S, MIMXRT555S, MIMXRT533S, MIMXRT685S, MIMXRT633S), on which the TRNG is the zephyr,entropy chosen node; other SoCs using this driver take the SDK path that clamps the copy size and are unaffected. The fix routes any unaligned prefix and any sub-word tail through a local bounce word and hands the SDK only word-multiple sizes, so the SDK's word-granular writes can no longer pass the end of the caller's buffer.

Unbounded variable-length array in fuel gauge syscall verifiers allows kernel stack overflow from user mode

The user-mode syscall verifiers z_vrfy_fuel_gauge_get_props() and z_vrfy_fuel_gauge_set_props() in drivers/fuel_gauge/fuel_gauge_syscall_handlers.c declared two variable-length arrays, union fuel_gauge_prop_val k_vals[len] and fuel_gauge_prop_t k_props[len], sized directly by the caller-supplied len argument. len is an unvalidated size_t taken straight from the syscall ABI, and the VLAs were allocated before any check at all — including before the K_SYSCALL_DRIVER_FUEL_GAUGE() object-permission check. The subsequent k_usermode_from_copy() calls validated only that the user source buffer was readable; the kernel destination was never bounds-checked, since it was sized by the same attacker-chosen len. Any thread running in user mode with CONFIG_USERSPACE enabled can invoke fuel_gauge_get_props() or fuel_gauge_set_props() with a large len. This first displaces the supervisor stack pointer by an arbitrary attacker-chosen amount — Zephyr does not build with stack-clash probing, so the displacement itself does not fault, and the nested calls made by the verifier then write frames below the privileged stack. If the caller has been granted access to a fuel-gauge device object, the memcpy inside k_usermode_from_copy() additionally writes len * sizeof(union fuel_gauge_prop_val) bytes of fully attacker-controlled data starting well below the stack base. CONFIG_PRIVILEGED_STACK_SIZE defaults to 1024 bytes, so a len of roughly 170 already exhausts it. The result is an out-of-bounds write in supervisor mode with attacker-controlled length and, on the permitted path, attacker-controlled content — a break out of the user-mode sandbox into kernel memory, leading to kernel code execution or a system crash. A stack guard region does not contain it, because the copy begins below the guard and walks upward, corrupting unprotected memory before the guard is reached. The fix removes the kernel-side copies entirely and validates the caller's arrays in place with K_SYSCALL_MEMORY_ARRAY_READ() / K_SYSCALL_MEMORY_ARRAY_WRITE(), which also handle the len * size multiplication overflow; this is safe because neither fuel_gauge_prop_t nor union fuel_gauge_prop_val contains embedded pointers.

Stack out-of-bounds write in the Goodix GT911 touch controller driver from an unvalidated device-reported touch point count

The Goodix GT9xx input driver in drivers/input/input_gt911.c reads the touch point count from the controller's status register and masks it with GT911_TOUCH_POINTS_MSK (0x0F), yielding a value of 0..15. In gt911_process() that value is used directly as the loop bound for filling point_reg[], a stack array sized to CONFIG_INPUT_GT911_MAX_TOUCH_POINTS, whose Kconfig range is 1..5 with a default of 1. No other check constrains the count; the driver relied only on a comment asserting that the controller had been programmed at init to report no more points than configured. Each loop iteration issues an I2C read of eight bytes straight into point_reg[i], so a controller that reports more points than the array holds causes up to 112 bytes of peer-supplied data to be written past the end of the array, over the stack frame of gt911_process() in the system workqueue thread. Two further loops then read out of bounds from the same array. Triggering it requires control of, or the ability to substitute, the I2C touch controller — plausible on the many supported boards where the GT9xx panel is a pluggable display module or shield rather than an on-PCB part; a spoofed device need only answer the init probes with a supported product ID and a checksum-valid config blob. The same overflow can also occur non-adversarially, with a GT9271-class panel that ignores the driver's touch-count programming and reports up to ten points, or with bus corruption of the single status byte. The impact is an out-of-bounds stack write with fully attacker-chosen content executing at kernel privilege, i.e. potential control-flow hijack on the host MCU, in addition to out-of-bounds reads and crashes. The attack vector is physical/local hardware access only; there is no network, USB, or syscall path to the defect. The fix clamps the reported count with min() against CONFIG_INPUT_GT911_MAX_TOUCH_POINTS before any array indexing.

MQX Classic UDP recvfrom Buffer Overflow

NXP MQX Classic before 5.0 contains an out-of-bounds write vulnerability in the RTCS UDP recvfrom() implementation. Improper enforcement of the application-supplied receive buffer length may allow a crafted UDP packet to overflow the destination buffer, resulting in memory corruption, or denial of service.

Substance3D - Designer | Out-of-bounds Write (CWE-787)

Substance3D - Designer is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

jasper: heap-based buffer overflow of size 1 in jas_icctxtdesc_input in libjasper/base/jas_icc.c

An issue was discovered in JasPer 1.900.8, 1.900.9, 1.900.10, 1.900.11, 1.900.12, 1.900.13, 1.900.14, 1.900.15, 1.900.16, 1.900.17, 1.900.18, 1.900.19, 1.900.20, 1.900.21, 1.900.22, 1.900.23, 1.900.24, 1.900.25, 1.900.26, 1.900.27, 1.900.28, 1.900.29, 1.900.30, 1.900.31, 2.0.0, 2.0.1, 2.0.2, 2.0.3, 2.0.4, 2.0.5, 2.0.6, 2.0.7, 2.0.8, 2.0.9, 2.0.10, 2.0.11, 2.0.12, 2.0.13, 2.0.14, 2.0.15, 2.0.16. There is a heap-based buffer overflow of size 1 in the function jas_icctxtdesc_input in libjasper/base/jas_icc.c.

nodejs: Out of bounds (OOB) write via UCS-2 encoding

In all versions of Node.js prior to 6.14.4, 8.11.4 and 10.9.0 when used with UCS-2 encoding (recognized by Node.js under the names `'ucs2'`, `'ucs-2'`, `'utf16le'` and `'utf-16le'`), `Buffer#write()` can be abused to write outside of the bounds of a single `Buffer`. Writes that start from the second-to-last position of a buffer cause a miscalculation of the maximum length of the input bytes to be written.

Microsoft Office 2007 SP2, Microsoft Office Word Viewer, Microsoft Office 2010 SP2, Microsoft Office 2013 SP1 and RT SP1, Microsoft Office 2016, and Microsoft Office 2016 Click-to-Run (C2R) allow a remote code execution vulnerability, due to how Office handles objects in memory, aka "Microsoft Office Memory Corruption Vulnerability". This CVE is unique from CVE-2018-0852.

FreeRDP 3.3.0 before 3.32.0 Heap Out-of-Bounds Write via Grayscale JPEG Clipboard Data

FreeRDP 3.3.0 before 3.32.0, when built with WINPR_UTILS_IMAGE_JPEG=ON, has a heap-based out-of-bounds write in winpr_convert_from_jpeg because grayscale JPEG buffers are sized from one input component rather than three BGR output components. A malicious RDP server can offer a grayscale JPEG via clipboard redirection, corrupting client memory and crashing it when the item is pasted as CF_DIB bitmap data.

GPAC AIT Parser ait.c gf_m2ts_decode_ait out-of-bounds write

A vulnerability has been found in GPAC up to 26.07.0. This vulnerability affects the function gf_m2ts_decode_ait of the file src/media_tools/ait.c of the component AIT Parser. Such manipulation leads to out-of-bounds write. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The name of the patch is 6d2c21a1a688abb20d0111b608db3b6f44d348f4. Applying a patch is advised to resolve this issue.