Search vulnerabilities

Results 130

Export CSV
CVE-2023-26048

OutOfMemoryError for large multipart without filename in Eclipse Jetty

Jetty is a java based web server and servlet engine. In affected versions servlets with multipart support (e.g. annotated with `@MultipartConfig`) that call `HttpServletRequest.getParameter()` or `HttpServletRequest.getParts()` may cause `OutOfMemoryError` when the client sends a multipart request with a part that has a name but no filename and very large content. This happens even with the default settings of `fileSizeThreshold=0` which should stream the whole part content to disk. An attacker client may send a large multipart request and cause the server to throw `OutOfMemoryError`. However, the server may be able to recover after the `OutOfMemoryError` and continue its service -- although it may take some time. This issue has been patched in versions 9.4.51, 10.0.14, and 11.0.14. Users are advised to upgrade. Users unable to upgrade may set the multipart parameter `maxRequestSize` which must be set to a non-negative value, so the whole multipart content is limited (although still read into memory).

CVSS 3.1 · 5.3 Medium EPSS 3.4% KEV · Not listed
Vendors
Products
CVE-2024-47554

Apache Commons IO: Possible denial of service attack on untrusted input to XmlStreamReader

Uncontrolled Resource Consumption vulnerability in Apache Commons IO. The org.apache.commons.io.input.XmlStreamReader class may excessively consume CPU resources when processing maliciously crafted input. This issue affects Apache Commons IO: from 2.0 before 2.14.0. Users are recommended to upgrade to version 2.14.0 or later, which fixes the issue.

CVSS 3.1 · 4.3 Medium EPSS 1.3% KEV · Not listed
Vendors
CVE-2023-34454

snappy-java's Integer Overflow vulnerability in compress leads to DoS

snappy-java is a fast compressor/decompressor for Java. Due to unchecked multiplications, an integer overflow may occur in versions prior to 1.1.10.1, causing an unrecoverable fatal error. The function `compress(char[] input)` in the file `Snappy.java` receives an array of characters and compresses it. It does so by multiplying the length by 2 and passing it to the rawCompress` function. Since the length is not tested, the multiplication by two can cause an integer overflow and become negative. The rawCompress function then uses the received length and passes it to the natively compiled maxCompressedLength function, using the returned value to allocate a byte array. Since the maxCompressedLength function treats the length as an unsigned integer, it doesn’t care that it is negative, and it returns a valid value, which is casted to a signed integer by the Java engine. If the result is negative, a `java.lang.NegativeArraySizeException` exception will be raised while trying to allocate the array `buf`. On the other side, if the result is positive, the `buf` array will successfully be allocated, but its size might be too small to use for the compression, causing a fatal Access Violation error. The same issue exists also when using the `compress` functions that receive double, float, int, long and short, each using a different multiplier that may cause the same issue. The issue most likely won’t occur when using a byte array, since creating a byte array of size 0x80000000 (or any other negative value) is impossible in the first place. Version 1.1.10.1 contains a patch for this issue.

CVSS 3.1 · 5.9 Medium EPSS 1.5% KEV · Not listed
Vendors
CVE-2023-34453

snappy-java's Integer Overflow vulnerability in shuffle leads to DoS

snappy-java is a fast compressor/decompressor for Java. Due to unchecked multiplications, an integer overflow may occur in versions prior to 1.1.10.1, causing a fatal error. The function `shuffle(int[] input)` in the file `BitShuffle.java` receives an array of integers and applies a bit shuffle on it. It does so by multiplying the length by 4 and passing it to the natively compiled shuffle function. Since the length is not tested, the multiplication by four can cause an integer overflow and become a smaller value than the true size, or even zero or negative. In the case of a negative value, a `java.lang.NegativeArraySizeException` exception will raise, which can crash the program. In a case of a value that is zero or too small, the code that afterwards references the shuffled array will assume a bigger size of the array, which might cause exceptions such as `java.lang.ArrayIndexOutOfBoundsException`. The same issue exists also when using the `shuffle` functions that receive a double, float, long and short, each using a different multiplier that may cause the same issue. Version 1.1.10.1 contains a patch for this vulnerability.

CVSS 3.1 · 5.9 Medium EPSS 1.7% KEV · Not listed
Vendors
CVE-2023-33201

bouncycastle: potential blind LDAP injection attack using a self-signed certificate

Bouncy Castle For Java before 1.74 is affected by an LDAP injection vulnerability. The vulnerability only affects applications that use an LDAP CertStore from Bouncy Castle to validate X.509 certificates. During the certificate validation process, Bouncy Castle inserts the certificate's Subject Name into an LDAP search filter without any escaping, which leads to an LDAP injection vulnerability.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Products
CVE-2023-52428

nimbus-jose-jwt: large JWE p2c header value causes Denial of Service

In Connect2id Nimbus JOSE+JWT before 9.37.2, an attacker can cause a denial of service (resource consumption) via a large JWE p2c header value (aka iteration count) for the PasswordBasedDecrypter (PBKDF2) component.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
CVE-2023-43642

Missing upper bound check on chunk length in snappy-java

snappy-java is a Java port of the snappy, a fast C++ compresser/decompresser developed by Google. The SnappyInputStream was found to be vulnerable to Denial of Service (DoS) attacks when decompressing data with a too large chunk size. Due to missing upper bound check on chunk length, an unrecoverable fatal error can occur. All versions of snappy-java including the latest released version 1.1.10.3 are vulnerable to this issue. A fix has been introduced in commit `9f8c3cf74` which will be included in the 1.1.10.4 release. Users are advised to upgrade. Users unable to upgrade should only accept compressed data from trusted sources.

CVSS 3.1 · 7.5 High EPSS 1.2% KEV · Not listed
Vendors
CVE-2023-3635

Okio GzipSource unhandled exception Denial of Service

GzipSource does not handle an exception that might be raised when parsing a malformed gzip buffer. This may lead to denial of service of the Okio client when handling a crafted GZIP archive, by using the GzipSource class.

CVSS 3.1 · 5.9 Medium EPSS 1.3% KEV · Not listed
Vendors
CVE-2023-3089

Ocp & fips mode

A compliance problem was found in the Red Hat OpenShift Container Platform. Red Hat discovered that, when FIPS mode was enabled, not all of the cryptographic modules in use were FIPS-validated.

CVSS 3.1 · 7 High EPSS < 1% KEV · Not listed
Vendors
CVE-2022-42920

Apache Commons BCEL prior to 6.6.0 allows producing arbitrary bytecode via out-of-bounds writing

Apache Commons BCEL has a number of APIs that would normally only allow changing specific class characteristics. However, due to an out-of-bounds writing issue, these APIs can be used to produce arbitrary bytecode. This could be abused in applications that pass attacker-controllable data to those APIs, giving the attacker more control over the resulting bytecode than otherwise expected. Update to Apache Commons BCEL 6.6.0.

CVSS 3.1 · 9.8 Critical EPSS 3.5% KEV · Not listed
Products
CVE-2022-42889

Apache Commons Text prior to 1.10.0 allows RCE when applied to untrusted input due to insecure interpolation defaults

Apache Commons Text performs variable interpolation, allowing properties to be dynamically evaluated and expanded. The standard format for interpolation is "${prefix:name}", where "prefix" is used to locate an instance of org.apache.commons.text.lookup.StringLookup that performs the interpolation. Starting with version 1.5 and continuing through 1.9, the set of default Lookup instances included interpolators that could result in arbitrary code execution or contact with remote servers. These lookups are: - "script" - execute expressions using the JVM script execution engine (javax.script) - "dns" - resolve dns records - "url" - load values from urls, including from remote servers Applications using the interpolation defaults in the affected versions may be vulnerable to remote code execution or unintentional contact with remote servers if untrusted configuration values are used. Users are recommended to upgrade to Apache Commons Text 1.10.0, which disables the problematic interpolators by default.

CVSS 3.1 · 9.8 Critical EPSS 99.9% KEV · Not listed
Vendors
Apache Juniper Netapp and 1 more
Products
CVE-2022-2191

jetty-server: Improper release of ByteBuffers in SslConnections

In Eclipse Jetty versions 10.0.0 thru 10.0.9, and 11.0.0 thru 11.0.9 versions, SslConnection does not release ByteBuffers from configured ByteBufferPool in case of error code paths.

CVSS 3.1 · 7.5 High EPSS 2.2% KEV · Not listed
Vendors
Products
CVE-2022-2048

http2-server: Invalid HTTP/2 requests cause DoS

In Eclipse Jetty HTTP/2 server implementation, when encountering an invalid HTTP/2 request, the error handling has a bug that can wind up not properly cleaning up the active connections and associated resources. This can lead to a Denial of Service scenario where there are no enough resources left to process good requests.

CVSS 3.1 · 7.5 High EPSS 2.6% KEV · Not listed
Vendors
Debian Eclipse Jenkins and 2 more
Products
CVE-2022-2047

jetty-http: improver hostname input handling

In Eclipse Jetty versions 9.4.0 thru 9.4.46, and 10.0.0 thru 10.0.9, and 11.0.0 thru 11.0.9 versions, the parsing of the authority segment of an http scheme URI, the Jetty HttpURI class improperly detects an invalid input as a hostname. This can lead to failures in a Proxy scenario.

CVSS 3.1 · 2.7 Low EPSS 1.3% KEV · Not listed
Vendors
Debian Eclipse Netapp and 1 more
CVE-2021-4178

kubernetes-client: Insecure deserialization in unmarshalYaml method

A arbitrary code execution flaw was found in the Fabric 8 Kubernetes client affecting versions 5.0.0-beta-1 and above. Due to an improperly configured YAML parsing, this will allow a local and privileged attacker to supply malicious YAML.

CVSS 3.1 · 6.7 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2021-38153

Timing Attack Vulnerability for Apache Kafka Connect and Clients

Some components in Apache Kafka use `Arrays.equals` to validate a password or key, which is vulnerable to timing attacks that make brute force attacks for such credentials more likely to be successful. Users should upgrade to 2.8.1 or higher, or 3.0.0 or higher where this vulnerability has been fixed. The affected versions include Apache Kafka 2.0.0, 2.0.1, 2.1.0, 2.1.1, 2.2.0, 2.2.1, 2.2.2, 2.3.0, 2.3.1, 2.4.0, 2.4.1, 2.5.0, 2.5.1, 2.6.0, 2.6.1, 2.6.2, 2.7.0, 2.7.1, and 2.8.0.

CVSS 3.1 · 5.9 Medium EPSS 6.2% KEV · Not listed
Vendors
Apache Oracle Quarkus and 1 more
CVE-2021-34429

jetty: crafted URIs allow bypassing security constraints

For Eclipse Jetty versions 9.4.37-9.4.42, 10.0.1-10.0.5 & 11.0.1-11.0.5, URIs can be crafted using some encoded characters to access the content of the WEB-INF directory and/or bypass some security constraints. This is a variation of the vulnerability reported in CVE-2021-28164/GHSA-v7ff-8wcx-gmc5.

CVSS 3.1 · 5.3 Medium EPSS 99.3% KEV · Not listed
Vendors
Eclipse Netapp Oracle and 1 more
CVE-2021-34428

jetty: SessionListener can prevent a session from being invalidated breaking logout

For Eclipse Jetty versions <= 9.4.40, <= 10.0.2, <= 11.0.2, if an exception is thrown from the SessionListener#sessionDestroyed() method, then the session ID is not invalidated in the session ID manager. On deployments with clustered sessions and multiple contexts this can result in a session not being invalidated. This can result in an application used on a shared computer being left logged in.

CVSS 3.1 · 2.9 Low EPSS < 1% KEV · Not listed
Vendors
Debian Eclipse Netapp and 2 more