gd: gdImageScaleTwoPass function in gd_interpolation.c uses inconsistent allocate and free approaches

The gdImageScaleTwoPass function in gd_interpolation.c in the GD Graphics Library (aka libgd) before 2.2.0, as used in PHP before 5.6.12, uses inconsistent allocate and free approaches, which allows remote attackers to cause a denial of service (memory consumption) via a crafted call, as demonstrated by a call to the PHP imagescale function.

Memory leak in the gk_circuit_info_do_in_acf function in the H.323 implementation in Cisco IOS before 15.0(1)XA allows remote attackers to cause a denial of service (memory consumption) via a large number of calls over a long duration, as demonstrated by InterZone Clear Token (IZCT) test traffic, aka Bug ID CSCsz72535.

Memory leak in Cisco IOS before 15.0(1)XA5 might allow remote attackers to cause a denial of service (memory consumption) by sending a crafted SIP REGISTER message over UDP, aka Bug ID CSCtg41733.

Memory leak in the connection-manager implementation in Cisco Adaptive Security Appliance (ASA) Software 9.1(.3) and earlier allows remote attackers to cause a denial of service (multi-protocol management outage) by making multiple management session requests, aka Bug ID CSCug33233.

BIG-IP HTTP profile vulnerability

In BIG-IP versions 17.0.x before 17.0.0.2, and 16.1.x beginning in 16.1.2.2 to before 16.1.3.3, when an HTTP profile is configured on a virtual server and conditions beyond the attacker’s control exist on the target pool member, undisclosed requests sent to the BIG-IP system can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

kernel: soc: qcom: aoss: missing put_device call in qmp_get()

In the Linux kernel before 5.17.2, drivers/soc/qcom/qcom_aoss.c does not release an of_find_device_by_node reference after use, e.g., with put_device.

Apache Answer: The link for resetting user password is not Single-Use

Missing Release of Resource after Effective Lifetime vulnerability in Apache Answer. This issue affects Apache Answer: through 1.3.5. The password reset link remains valid within its expiration period even after it has been used. This could potentially lead to the link being misused or hijacked. Users are recommended to upgrade to version 1.3.6, which fixes the issue.

Apache Answer: The link to reset the user's password will remain valid after sending a new link

Missing Release of Resource after Effective Lifetime vulnerability in Apache Answer. This issue affects Apache Answer: through 1.3.5. User sends multiple password reset emails, each containing a valid link. Within the link's validity period, this could potentially lead to the link being misused or hijacked. Users are recommended to upgrade to version 1.3.6, which fixes the issue.

Junos OS Evolved: A high rate of SSH connections causes a Denial of Service

A Missing Release of Resource after Effective Lifetime vulnerability the xinetd process, responsible for spawning SSH daemon (sshd) instances, of Juniper Networks Junos OS Evolved allows an unauthenticated network-based attacker to cause a Denial of Service (DoS) by blocking SSH access for legitimate users. Continued receipt of these connections will create a sustained Denial of Service (DoS) condition. The issue is triggered when a high rate of concurrent SSH requests are received and terminated in a specific way, causing xinetd to crash, and leaving defunct sshd processes. Successful exploitation of this vulnerability blocks both SSH access as well as services which rely upon SSH, such as SFTP, and Netconf over SSH. Once the system is in this state, legitimate users will be unable to SSH to the device until service is manually restored.  See WORKAROUND section below. Administrators can monitor an increase in defunct sshd processes by utilizing the CLI command:   > show system processes | match sshd   root   25219 30901 0 Jul16 ?       00:00:00 [sshd] <defunct> This issue affects Juniper Networks Junos OS Evolved: * All versions prior to 21.4R3-S7-EVO * 22.3-EVO versions prior to 22.3R2-S2-EVO, 22.3R3-S2-EVO; * 22.4-EVO versions prior to 22.4R3-EVO; * 23.2-EVO versions prior to 23.2R2-EVO. This issue does not affect Juniper Networks Junos OS Evolved 22.1-EVO nor 22.2-EVO.

Denial of service whith ACME HTTPChallenge in Traefik

Traefik is an open source HTTP reverse proxy and load balancer. When Traefik is configured to use the `HTTPChallenge` to generate and renew the Let's Encrypt TLS certificates, the delay authorized to solve the challenge (50 seconds) can be exploited by attackers to achieve a `slowloris attack`. This vulnerability has been patch in version 2.10.6 and 3.0.0-beta5. Users are advised to upgrade. Users unable to upgrade should replace the `HTTPChallenge` with the `TLSChallenge` or the `DNSChallenge`.

WAGO: Series 750-3x/-8x prone to MODBUS server DoS

Uncontrolled resource consumption in Series WAGO 750-3x/-8x products may allow an unauthenticated remote attacker to DoS the MODBUS server with specially crafted packets.

A vulnerability in the Internet Group Management Protocol (IGMP) packet-processing functionality of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to exhaust buffers on an affected device, resulting in a denial of service (DoS) condition, aka a Memory Leak. The vulnerability is due to the affected software insufficiently processing IGMP Membership Query packets that are sent to an affected device. An attacker could exploit this vulnerability by sending a large number of IGMP Membership Query packets, which contain certain values, to an affected device. A successful exploit could allow the attacker to exhaust buffers on the affected device, resulting in a DoS condition that requires the device to be reloaded manually. This vulnerability affects: Cisco Catalyst 4500 Switches with Supervisor Engine 8-E, if they are running Cisco IOS XE Software Release 3.x.x.E and IP multicast routing is configured; Cisco devices that are running Cisco IOS XE Software Release 16.x, if IP multicast routing is configured. Cisco Bug IDs: CSCuw09295, CSCve94496.

Cisco Prime Access Registrar Denial of Service Vulnerability

A vulnerability in TCP connection management in Cisco Prime Access Registrar could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition when the application unexpectedly restarts. The vulnerability is due to incorrect handling of incoming TCP SYN packets to specific listening ports. The improper handling of the TCP SYN packets could cause a system file description to be allocated and not freed. An attacker could exploit this vulnerability by sending a crafted stream of TCP SYN packets to the application. A successful exploit could allow the attacker to cause the application to eventually restart if a file description cannot be obtained.

Cisco IOS XE Software Cisco Discovery Protocol Memory Leak Vulnerability

A vulnerability in the Cisco Discovery Protocol (CDP) module of Cisco IOS XE Software Releases 16.6.1 and 16.6.2 could allow an unauthenticated, adjacent attacker to cause a memory leak that may lead to a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain CDP packets. An attacker could exploit this vulnerability by sending certain CDP packets to an affected device. A successful exploit could cause an affected device to continuously consume memory and eventually result in a memory allocation failure that leads to a crash, triggering a reload of the affected device.

Cisco NX-OS Software Remote Management Memory Leak Denial of Service Vulnerability

A vulnerability in the Virtual Shell (VSH) session management for Cisco NX-OS Software could allow an authenticated, remote attacker to cause a VSH process to fail to delete upon termination. This can lead to a build-up of VSH processes that overtime can deplete system memory. When there is no system memory available, this can cause unexpected system behaviors and crashes. The vulnerability is due to the VSH process not being properly deleted when a remote management connection to the device is disconnected. An attacker could exploit this vulnerability by repeatedly performing a remote management connection to the device and terminating the connection in an unexpected manner. A successful exploit could allow the attacker to cause the VSH processes to fail to delete, which can lead to a system-wide denial of service (DoS) condition. The attacker must have valid user credentials to log in to the device using the remote management connection.

Waitress has a denial of service leading to high CPU usage/resource exhaustion

Waitress is a Web Server Gateway Interface server for Python 2 and 3. When a remote client closes the connection before waitress has had the opportunity to call getpeername() waitress won't correctly clean up the connection leading to the main thread attempting to write to a socket that no longer exists, but not removing it from the list of sockets to attempt to process. This leads to a busy-loop calling the write function. A remote attacker could run waitress out of available sockets with very little resources required. Waitress 3.0.1 contains fixes that remove the race condition.

Tokens cached in the AuthenticationService are susceptible to reuse in Bunkum

Bunkum is an open-source protocol-agnostic request server for custom game servers. First, a little bit of background. So, in the beginning, Bunkum's `AuthenticationService` only supported injecting `IUser`s. However, as Refresh and SoundShapesServer implemented permissions systems support for injecting `IToken`s into endpoints was added. All was well until 4.0. Bunkum 4.0 then changed to enforce relations between `IToken`s and `IUser`s. This wasn't implemented in a very good way in the `AuthenticationService`, and ended up breaking caching in such a way that cached tokens would persist after the lifetime of the request - since we tried to cache both tokens and users. From that point until now, from what I understand, Bunkum was attempting to use that cached token at the start of the next request once cached. Naturally, when that token expired, downstream projects like Refresh would remove the object from Realm - and cause the object in the cache to be in a detached state, causing an exception from invalid use of `IToken.User`. So in other words, a use-after-free since Realm can't manage the lifetime of the cached token. Security-wise, the scope is fairly limited, can only be pulled off on a couple endpoints given a few conditions, and you can't guarantee which token you're going to get. Also, the token *would* get invalidated properly if the endpoint had either a `IToken` usage or a `IUser` usage. The fix is to just wipe the token cache after the request was handled, which is now in `4.2.1`. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Touchlink authentication bypass due to packets processed after timeout or out of range in Ember ZNet

TouchLink packets processed after timeout or out of range due to Operation on a Resource after Expiration and Missing Release of Resource after Effective Lifetime may allow a device to be added outside of valid TouchLink range or pairing duration This issue affects Ember ZNet 7.1.x from 7.1.3 through 7.1.5; 7.2.x from 7.2.0 through 7.2.3; Version 7.3 and later are unaffected

Uncontrolled resource consumption in Zoom SDKs before 5.14.7 may allow an unauthenticated user to enable a denial of service via network access.

Missing Release of Resource after Effective Lifetime vulnerability in Aveva PI Server

AVEVA PI Server versions 2023 and 2018 SP3 P05 and prior contain a vulnerability that could allow an unauthenticated user to cause the PI Message Subsystem of a PI Server to consume available memory resulting in throttled processing of new PI Data Archive events and a partial denial-of-service condition.