CVE-2026-89486

ipmi: Fix use-after-free of cmd_rcvr in _ipmi_destroy_user()

In the Linux kernel, the following vulnerability has been resolved: ipmi: Fix use-after-free of cmd_rcvr in _ipmi_destroy_user() Commit 9e91f8a6c868 ("ipmi:msghandler: Remove srcu for the ipmi_interfaces list") dropped the synchronize_rcu() between unlinking the command receivers from intf->cmd_rcvrs and freeing them, updating only the comment that explains why the barrier is needed. The cmd_rcvrs list is still traversed under plain RCU: find_cmd_rcvr() walks it inside rcu_read_lock(), and handle_ipmb_get_msg_cmd() borrows rcvr->user from that lookup within the same read-side section. Without the grace period, _ipmi_destroy_user() can kfree() a cmd_rcvr while a reader still holds a pointer to it, causing a use-after-free. The rework only made srcu unnecessary for the interfaces list; the cmd_rcvrs list still relies on plain RCU. Restore the synchronize_rcu() before freeing the receivers.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-81006

ipmi: Remove all sysfs files on registration failure

In the Linux kernel, the following vulnerability has been resolved: ipmi: Remove all sysfs files on registration failure ipmi_add_smi() creates the nr_users and nr_msgs files before trying to create the maintenance_mode file. If that last creation fails, the error path removes only nr_users before dropping the final reference to the interface. Remove nr_msgs as well so no sysfs attribute embedded in the freed interface remains registered.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-80995

net: mctp: hold a reference to the route device in mctp_route_lookup()

In the Linux kernel, the following vulnerability has been resolved: net: mctp: hold a reference to the route device in mctp_route_lookup() mctp_route_lookup() uses rt->dev without holding a reference on it. mctp_route_lookup_single() returns the route under RCU only, so the route's device can be torn down concurrently: mctp_dev_put() drops the last reference and synchronously kfree()s mdev->addrs. mctp_dev_saddr() then reads rt->dev->addrs[0], giving a use-after-free reachable by an unprivileged local AF_MCTP user on the receive/forwarding path (no CAP_NET_RAW required): BUG: KASAN: slab-use-after-free in mctp_route_lookup Read of size 1 at addr ... by task mctp_uaf/... mctp_route_lookup mctp_pkttype_receive Freed by task ...: kfree mctp_dev_put mctp_dev_notify In the same window mctp_dst_from_route() -> mctp_dev_hold() also increments a refcount that has already reached zero ("refcount_t: addition on 0 ... mctp_dev_hold"). This reintroduces the use-after-free class of CVE-2023-3439: the source address lookup was moved ahead of the point where the destination takes its device reference. Take a reference with refcount_inc_not_zero() before touching rt->dev, skip a device that is already dead, and drop the reference once the destination has taken its own.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-80981

net/smc: fix use-after-free of the LLC qentry in smc_llc_srv_add_link()

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix use-after-free of the LLC qentry in smc_llc_srv_add_link() smc_llc_srv_add_link() keeps add_llc pointing into the queue entry: add_llc = &qentry->msg.add_link; smc_llc.c:1482 ... smc_llc_save_add_link_info(link_new, add_llc); smc_llc.c:1494 smc_llc_flow_qentry_del(&lgr->llc_flow_lcl); smc_llc.c:1495 ... u8 *llc_msg = smc_link_shared_v2_rxbuf(link) ? (u8 *)lgr->wr_rx_buf_v2 : (u8 *)add_llc; smc_llc.c:1504 smc_llc_save_add_link_rkeys(link, link_new, llc_msg); smc_llc.c:1506 smc_llc_flow_qentry_del() kfree()s the entry, so on a link without a shared v2 receive buffer the pointer handed to smc_llc_save_add_link_rkeys() is already freed. Before the Fixes: commit that branch always used lgr->wr_rx_buf_v2 and add_llc was not used after the free. Reproduced on an unpatched tree over rxe, with KASAN, kasan_multi_shot and a link forced to max_recv_sge == 1: the entry is freed and read by the same call, and the freeing frame is smc_llc_srv_add_link() itself. [ 2.523161] BUG: KASAN: slab-use-after-free in smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.523499] Read of size 2 at addr ffff8880052194de by task kworker/0:1/11 [ 2.523789] [ 2.523862] CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0-rc5-p0-g2c9dd296545d #35 PREEMPT(lazy) [ 2.523865] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 2.523866] Workqueue: smc_hs_wq smc_listen_work [ 2.523869] Call Trace: [ 2.523870] <TASK> [ 2.523871] dump_stack_lvl+0x53/0x70 [ 2.523872] print_report+0xd0/0x630 [ 2.523874] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 2.523876] ? smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.523878] kasan_report+0xce/0x100 [ 2.523879] ? smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.523881] smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.523883] ? smcr_buf_reg_lgr+0x2a4/0x660 [ 2.523885] smc_llc_srv_add_link+0xaa2/0x1e50 [ 2.523888] ? _printk+0xba/0xf0 [ 2.523897] ? __pfx_smc_llc_srv_add_link+0x10/0x10 [ 2.523899] ? down_write+0xb0/0x130 [ 2.523903] ? __pfx_down_write+0x10/0x10 [ 2.523905] smc_listen_work+0x489e/0x4d00 [ 2.523907] ? kmem_cache_free+0x1c6/0x3a0 [ 2.523911] ? __pfx_smc_listen_work+0x10/0x10 [ 2.523913] ? release_sock+0x148/0x1d0 [ 2.523915] ? smc_tcp_listen_work+0xb4f/0xfc0 [ 2.523917] ? _raw_spin_lock_irq+0x80/0xe0 [ 2.523918] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 2.523920] process_one_work+0x633/0x1030 [ 2.523922] ? assign_work+0x11d/0x370 [ 2.523924] worker_thread+0x45b/0xd10 [ 2.523926] ? __pfx_worker_thread+0x10/0x10 [ 2.523928] ? __pfx_worker_thread+0x10/0x10 [ 2.523929] kthread+0x2c6/0x3b0 [ 2.523931] ? recalc_sigpending+0x15c/0x1e0 [ 2.523934] ? __pfx_kthread+0x10/0x10 [ 2.523935] ret_from_fork+0x36e/0x5a0 [ 2.523937] ? __pfx_ret_from_fork+0x10/0x10 [ 2.523938] ? __switch_to+0x572/0xdd0 [ 2.523943] ? __pfx_kthread+0x10/0x10 [ 2.523944] ret_from_fork_asm+0x1a/0x30 [ 2.523947] </TASK> [ 2.523948] [ 2.531253] Allocated by task 48: [ 2.531399] kasan_save_stack+0x33/0x60 [ 2.531570] kasan_save_track+0x14/0x30 [ 2.531737] __kasan_kmalloc+0x8f/0xa0 [ 2.531905] __kmalloc_cache_noprof+0x158/0x370 [ 2.532100] smc_llc_enqueue+0x72/0x560 [ 2.532268] smc_wr_rx_tasklet_fn+0x474/0xa80 [ 2.532491] tasklet_action_common+0x20f/0x8a0 [ 2.532714] handle_softirqs+0x18e/0x590 [ 2.532886] do_softirq+0x3b/0x60 [ 2.533036] __local_bh_enable_ip+0x61/0x70 [ 2.533221] __alloc_skb+0x732/0x890 [ 2.533384] rxe_init_packet+0x16b/0x4f0 [ 2.533567] prepare_ack_packet+0xb8/0x830 [ 2.533760] rxe_receiver+0x495/0x96e0 [ 2.533933] do_work+0x144/0x470 [ 2 ---truncated---

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-80955

dm-pcache: fix use-after-free and invalid seg operations in kset_replay()

In the Linux kernel, the following vulnerability has been resolved: dm-pcache: fix use-after-free and invalid seg operations in kset_replay() In kset_replay, when key->seg_gen is stale (key->seg_gen < key->cache_pos.cache_seg->gen), cache_key_put(key) is called but then key->cache_pos.cache_seg is accessed as the argument to cache_seg_get(). This is a use-after-free on the freed key memory. Although mempool recycled memory is not immediately reclaimed or overwritten in practice, this is still a potential UAF bug. Additionally, for expired invalid keys, setting the cache->seg_map bit and calling cache_seg_get() is unreasonable since the corresponding segment data is no longer valid. Fix both issues by moving cache_seg_get() and __set_bit() after the gen check, so they only execute for valid keys, and using continue to skip invalid keys.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-80950

i3c: renesas: Check that the transfer is valid before accessing it

In the Linux kernel, the following vulnerability has been resolved: i3c: renesas: Check that the transfer is valid before accessing it The Renesas I3C driver uses an asynchronous model to transfer data. It prepares a struct renesas_i3c_xfer, enqueues it, and waits for completion. The interrupt handler dequeues the transfer, updates/uses it, and signals the waiting thread. If the completion times out, the waiting thread dequeues the transfer and free it. If an interrupt fires after that, the handler may access freed memory, leading to crashes. Check that the transfer is still valid before accessing it in the interrupt handler. With it clear any status flags and disable all the interrupts to avoid triggering the same interrupts again.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-89737

usb: typec: thunderbolt: Disable work before freeing tbt on remove

In the Linux kernel, the following vulnerability has been resolved: usb: typec: thunderbolt: Disable work before freeing tbt on remove tbt_altmode_remove() drops the plug and cable references without draining tbt->work. The work function dereferences those references, and can also requeue itself in its error path. The VDM callbacks can queue the same work item. Disable and drain tbt->work before dropping the references. This waits for an existing invocation and prevents subsequent schedule_work() calls from queueing it during teardown. This issue was found by an in-house static analysis tool and confirmed by manual code review.

CVSS 3.1 · 7.0 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-89661

NFSD: Prevent post-shutdown use-after-free in unlock_filesystem

In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent post-shutdown use-after-free in unlock_filesystem Writing a filesystem path to /proc/fs/nfsd/unlock_filesystem runs nfsd4_cancel_copy_by_sb() before nfsd_mutex is held and before the handler confirms that nn->nfsd_serv is set. Once nfsd has shut down, nfs4_state_destroy_net() has freed nn->conf_id_hashtbl but left the pointer intact, so the cancel helper iterates freed slab memory as an array of struct list_head and then dereferences a bogus nfs4_client when it takes clp->async_lock. A local administrator holding CAP_SYS_ADMIN can reach this use-after-free by stopping the server and then writing to unlock_filesystem; KASAN reports a slab-use-after-free read in nfsd4_cancel_copy_by_sb(). nfsd4_revoke_states() walks the same state tables and for that reason already runs only under nfsd_mutex with nn->nfsd_serv confirmed present. Move the async COPY cancel into that protected section so every NFSv4 state-table walker on this path observes a running server. Async copies exist only while the server runs, so gating the cancel on nn->nfsd_serv loses nothing.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-89516

sched_ext: Don't BUG_ON a destroyed DSQ in process_deferred_reenq_users

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't BUG_ON a destroyed DSQ in process_deferred_reenq_users scx_bpf_dsq_reenq() queues a deferred reenq (dru) that runs from run_deferred(), not ops.dispatch(). If the DSQ is destroyed before the dru runs, process_deferred_reenq_users() sees dsq->id == SCX_DSQ_INVALID and hits the BUG_ON. destroy_dsq() doesn't flush pending drus, so just skip. tj: Read dsq->id once with READ_ONCE(). Reading it separately in the INVALID check and the BUG_ON would leave a window where destroy_dsq() can invalidate the id between the two reads and still trigger the BUG_ON.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-89455

PCI: plda: Fix use-after-free of event IRQs during teardown

In the Linux kernel, the following vulnerability has been resolved: PCI: plda: Fix use-after-free of event IRQs during teardown plda_pcie_irq_domain_deinit() removes pcie->event_domain via irq_domain_remove(), but the per-event IRQs mapped from that domain are requested with devm_request_irq() in plda_init_interrupts(). The actual free_irq() for a devm-managed IRQ is deferred by devres until after the calling probe()/remove() function returns. This means irq_domain_remove() can free the domain's internal data before the deferred free_irq() for IRQs still mapped into it has run. When devres later processes that deferred cleanup, it can end up dereferencing the already-freed domain. Free each event IRQ explicitly with devm_free_irq() before removing the domain. This triggers the free immediately and removes the IRQ from the devres tracking list, so devres will not attempt to free it a second time later. Also dispose of the event, INTx, and MSI IRQ mappings with irq_dispose_mapping() before their owning domains are removed. Finally, guard the calls to irq_set_chained_handler_and_data() for pcie->irq, pcie->msi_irq, and pcie->intx_irq so they only run when those fields hold a valid (>0) IRQ number. This is a pre-existing issue, flagged by automated review during work on an earlier, unrelated patch to this driver. Build-tested and boot-tested on StarFive VisionFive v1.2A board

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-58592

Ladybird - Web-Reachable Code Execution via Dangling FunctionType Reference in WebAssembly ESM Integration

Ladybird before commit 2f9dc7e contains a dangling-reference memory-safety flaw in its WebAssembly ESM-integration module loader. When a JavaScript function is imported into a WebAssembly module via the ESM path, WebAssemblyModule.cpp passes a stack-local Wasm::FunctionType by reference to create_host_function, whose host callback captures and later reads that reference; once the ESM link-loop iteration ends the FunctionType is destroyed, leaving the callback with a dangling reference (the normal instantiate path uses a long-lived reference and is not affected). Stale result-type data lets the host callback return an empty result vector for a statically non-empty result, so the destination register retains an attacker-influenced value that is then consumed by the WASM-GC array.set handler, which bit-casts the reference low bits to an ArrayInstance pointer after only a null check, yielding an arbitrary write. A web page can chain this into code execution in the WebContent process. Verified reachable from HTML content without any instrumentation or source modification.

CVSS 4.0 · 8.9 High EPSS < 1% KEV · Not listed

Vendors

Ladybirdbrowser

Products

Ladybird

CVE-2026-45447

Heap Use-After-Free in the PKCS7_verify() Function

Issue summary: A specially crafted PKCS#7 or S/MIME signed message could trigger a use-after-free during PKCS#7 signature verification. Impact summary: A use-after-free may result in process crashes, heap corruption, or potentially remote code execution. When processing a PKCS#7 or S/MIME signed message, if the SignedData digestAlgorithms field is present as an empty ASN.1 SET, OpenSSL may incorrectly free a caller-owned BIO during PKCS7_verify(). A subsequent use of the BIO by the calling application results in a use-after-free condition. In the common case this occurs when the application later calls BIO_free() on the BIO originally passed to PKCS7_verify(). Depending on allocator behavior and application-specific BIO usage patterns, this may result in a crash or other memory corruption. In some application contexts this may potentially be exploitable for remote code execution. Applications that process PKCS#7 or S/MIME signed messages using OpenSSL PKCS#7 APIs may be affected. Applications using the CMS APIs for this processing are not affected. The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary.

CVSS 3.1 · 8.8 High EPSS 4.0% KEV · Not listed

Vendors

Openssl

Products

Openssl

CVE-2026-87933

DaveGamble cJSON cJSON_Utils.c cJSONUtils_MergePatch use after free

A vulnerability was found in DaveGamble cJSON up to 1.7.19. The affected element is the function cJSONUtils_MergePatch of the file cJSON_Utils.c. The manipulation results in use after free. The attack may be launched remotely. The exploit has been made public and could be used. The pull request to fix this issue awaits acceptance.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed

Vendors

Davegamble

Products

Cjson

CVE-2026-87460

chromium-browser: chromium-browser: Use after free in Platform

Use after free in Platform in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High)

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed

Vendors

Google

Products

Chrome

CVE-2026-87588

chromium-browser: chromium-browser: Use after free in Chromecast

Use after free in Chromecast in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium)

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed

Vendors

Google

Products

Chrome

CVE-2026-86425

ImageMagick before 7.1.2-30 Heap-use-after-free via Layer

ImageMagick before 7.1.2-30 and 6.9.x before 6.9.13-55 contains a heap-use-after-free vulnerability in the Layer method of PerlMagick. An attacker who supplies a crafted list of images can trigger memory access after deallocation, resulting in a crash (denial of service).

CVSS 4.0 · 4.8 Medium EPSS < 1% KEV · Not listed

Vendors

Imagemagick

Products

Imagemagick

CVE-2026-85049

chromium-browser: skia: chromium-browser: Use after free in Skia

Use after free in Skia in Google Chrome prior to 152.0.7977.82 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High)

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed

Vendors

Google

Products

Chrome

CVE-2026-86423

ImageMagick before 7.1.2-30 Heap-use-after-free via GetList

ImageMagick before 7.1.2-30 and 6.9.x before 6.9.13-55 contains a heap-use-after-free vulnerability in the GetList method of PerlMagick. A crafted call to the GetList method can trigger the use-after-free, resulting in a crash (denial of service).

CVSS 4.0 · 4.8 Medium EPSS < 1% KEV · Not listed

Vendors

Imagemagick

Products

Imagemagick

CVE-2026-64421

media: nxp: imx8-isi: Fix use-after-free on remove

In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Fix use-after-free on remove KASAN reports a slab-use-after-free in __media_entity_remove_link() during rmmod of imx8_isi: BUG: KASAN: slab-use-after-free in __media_entity_remove_link+0x608/0x650 Read of size 2 at addr ffff0000d47cb02a by task rmmod/724 Call trace: __media_entity_remove_link+0x608/0x650 __media_entity_remove_links+0x78/0x144 __media_device_unregister_entity+0x150/0x280 media_device_unregister_entity+0x48/0x68 v4l2_device_unregister_subdev+0x158/0x300 v4l2_async_unbind_subdev_one+0x22c/0x358 v4l2_async_nf_unbind_all_subdevs+0xfc/0x1c0 v4l2_async_nf_unregister+0x5c/0x14c mxc_isi_remove+0x124/0x2a0 [imx8_isi] Allocated by task 249: __kmalloc_noprof+0x27c/0x690 mxc_isi_crossbar_init+0x22c/0x560 [imx8_isi] Freed by task 724: kfree+0x1e4/0x5b0 mxc_isi_crossbar_cleanup+0x34/0x80 [imx8_isi] mxc_isi_remove+0x11c/0x2a0 [imx8_isi] The problem is that mxc_isi_remove() calls mxc_isi_crossbar_cleanup() before mxc_isi_v4l2_cleanup(). The crossbar cleanup frees the media entity pads, but the subsequent v4l2 cleanup still tries to remove media links that reference those pads. Fix this by calling mxc_isi_v4l2_cleanup() before mxc_isi_crossbar_cleanup() to ensure all media entities are properly unregistered while the pads are still valid.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-64396

ksmbd: fix UAF of struct file_lock in SMB2_LOCK deferred-lock cancellation

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix UAF of struct file_lock in SMB2_LOCK deferred-lock cancellation When a blocking byte-range lock request is deferred in the FILE_LOCK_DEFERRED path, ksmbd registers the asynchronous work into the connection's async_requests list via setup_async_work(). The cancel callback smb2_remove_blocked_lock() holds a reference to the flock. If the lock waiter is subsequently woken up but the work state is no longer KSMBD_WORK_ACTIVE (e.g., due to a concurrent cancellation), the cleanup path calls locks_free_lock(flock) without dequeuing the work from the async_requests list. Concurrently, smb2_cancel() walks the list under conn->request_lock and invokes the cancel callback, which then dereferences the already freed 'flock'. This leads to a slab-use-after-free inside __wake_up_common. Fix this by restructuring the cleanup logic after the worker returns from ksmbd_vfs_posix_lock_wait(). Move list_del(&smb_lock->llist) and release_async_work(work) to the top of the cleanup block. This guarantees that the async work is completely dequeued and serialized under conn->request_lock before locks_free_lock(flock) is called, rendering the flock unreachable for any concurrent smb2_cancel().

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel