mptcp: options: reset DSS fields in case of unexpected size

In the Linux kernel, the following vulnerability has been resolved: mptcp: options: reset DSS fields in case of unexpected size A remote peer could send a malformed DSS with a wrong size, followed by another DSS or MPC + Data. In this case, the first suboption will be ignored, but leaving some fields written, which could lead to inconsistency or access uninitialized data. Explicitly reset the fields that could have been modified in case of unexpected size.

audit: fix potential use-after-free in audit_del_rule()

In the Linux kernel, the following vulnerability has been resolved: audit: fix potential use-after-free in audit_del_rule() `audit_del_rule()` destroys `e->rule.exe` via `audit_remove_mark_rule()` before unlinking the rule from RCU-visible filter lists and waiting for a grace period. Concurrent readers in `audit_filter()` and `audit_filter_rules()` still dereference `e->rule.exe`, while the fsnotify mark can be freed on an independent lifetime path. This creates a use-after-free window during rule deletion. Fix this by unlinking the rule from the RCU-visible lists and invoking `synchronize_rcu()` before calling `audit_remove_mark_rule()` (and other rule removal helpers). This ensures that all existing RCU readers have exited the critical section before any underlying resources are destroyed.

iommu/vt-d: Fix RB-tree corruption in probe error path

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix RB-tree corruption in probe error path The info->node RB-tree member is zero-initialized via kzalloc. If a device does not support ATS, the device_rbtree_insert() call is skipped. If a subsequent probe step fails, the error path jumps to device_rbtree_remove(), which misinterprets the zeroed node as a tree root and corrupts the device RB-tree. Fix this by explicitly initializing the RB-node as empty using RB_CLEAR_NODE() during initialization and guarding the removal with RB_EMPTY_NODE().

wifi: iwlwifi: mvm: clean up ROC on failure

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: clean up ROC on failure If the firmware fails to start the session protection, then we do call iwl_mvm_roc_finished() here, but that won't do anything at all because IWL_MVM_STATUS_ROC_P2P_RUNNING was never set. Set IWL_MVM_STATUS_ROC_P2P_RUNNING in the failure/stop path. If it started successfully before, it's already set, so that doesn't matter, and if it didn't start it needs to be set to clean up. Not doing so will lead to a WARN_ON() later on a fresh remain- on-channel, since the link is already active when activated as it was never deactivated.

KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop Move the conditional loading of hardware DR6 with the guest's DR6 value out of the core .vcpu_run() loop to fix a bug where KVM can load hardware with a stale vcpu->arch.dr6. When the guest accesses a DR and host userspace isn't debugging the guest, KVM disables DR interception and loads the guest's values into hardware on VM-Enter and saves them on VM-Exit. This allows the guest to access DRs at will, e.g. so that a sequence of DR accesses to configure a breakpoint only generates one VM-Exit. For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest) and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop. But for DR6, the guest's value doesn't need to be loaded into hardware for KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas VMX requires software to manually load the guest value, and so loading the guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done _inside_ the core run loop. Unfortunately, saving the guest values on VM-Exit is initiated by common x86, again outside of the core run loop. If the guest modifies DR6 (in hardware, when DR interception is disabled), and then the next VM-Exit is a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and clobber the guest's actual value. The bug shows up primarily with nested VMX because KVM handles the VMX preemption timer in the fastpath, and the window between hardware DR6 being modified (in guest context) and DR6 being read by guest software is orders of magnitude larger in a nested setup. E.g. in non-nested, the VMX preemption timer would need to fire precisely between #DB injection and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the window where hardware DR6 is "dirty" extends all the way from L1 writing DR6 to VMRESUME (in L1). L1's view: ========== <L1 disables DR interception> CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0 A: L1 Writes DR6 CPU 0/KVM-7289 [023] d.... 2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1 B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec D: L1 reads DR6, arch.dr6 = 0 CPU 0/KVM-7289 [023] d.... 2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0 CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0 L2 reads DR6, L1 disables DR interception CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216 CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0 CPU 0/KVM-7289 [023] d.... 2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0 L2 detects failure CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 reason HLT L1 reads DR6 (confirms failure) CPU 0/KVM-7289 [023] d.... 2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0 L0's view: ========== L2 reads DR6, arch.dr6 = 0 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 L2 => L1 nested VM-Exit CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_exit: vcpu 23 reason VMREAD CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410. ---truncated---

wifi: ath11k: Ignore frags from uninitialized peer in dp.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: Ignore frags from uninitialized peer in dp. When max virtual ap interfaces are configured in all the bands with ACS and hostapd restart is done every 60s, a crash is observed at random times. In this certain scenario, a fragmented packet is received for self peer, for which rx_tid and rx_frags are not initialized in datapath. While handling this fragment, crash is observed as the rx_frag list is uninitialised and when we walk in ath11k_dp_rx_h_sort_frags, skb null leads to exception. To address this, before processing received fragments we check dp_setup_done flag is set to ensure that peer has completed its dp peer setup for fragment queue, else ignore processing the fragments. Call trace: ath11k_dp_process_rx_err+0x550/0x1084 [ath11k] ath11k_dp_service_srng+0x70/0x370 [ath11k] 0xffffffc009693a04 __napi_poll+0x30/0xa4 net_rx_action+0x118/0x270 __do_softirq+0x10c/0x244 irq_exit+0x64/0xb4 __handle_domain_irq+0x88/0xac gic_handle_irq+0x74/0xbc el1_irq+0xf0/0x1c0 arch_cpu_idle+0x10/0x18 do_idle+0x104/0x248 cpu_startup_entry+0x20/0x64 rest_init+0xd0/0xdc arch_call_rest_init+0xc/0x14 start_kernel+0x480/0x4b8 Code: f9400281 f94066a2 91405021 b94a0023 (f9406401) Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

JIT miscompilation in the JavaScript Engine: JIT component

JIT miscompilation in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5.

nvmet: fix return status of RMI log page on allocation failure

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix return status of RMI log page on allocation failure nvmet_execute_get_log_page_rmi() leaves 'status' holding NVME_SC_SUCCESS (set by the successful nvmet_req_find_ns() call) when the kzalloc() for the log buffer fails. It then jumps to the out label and completes the request with a success status, so the host is told the command succeeded while no data was transferred. Initialize 'status' to NVME_SC_INTERNAL, matching the smart log handler, so an allocation failure is reported as an internal error.

md: remove REQ_NOWAIT support from raid1/10/456

In the Linux kernel, the following vulnerability has been resolved: md: remove REQ_NOWAIT support from raid1/10/456 REQ_NOWAIT support in md personalities that can block internally is fundamentally incomplete. While reads can avoid some blocking paths, write requests can still encounter cases where one mirror succeeds while another returns -EAGAIN. At that point md cannot distinguish queue pressure from a real device failure, so it can neither record a bad block nor safely retry the write without REQ_NOWAIT, leaving mirrors with divergent data. Rather than continue advertising REQ_NOWAIT support for personalities that cannot implement it correctly, remove it from raid1, raid10 and raid456. Keep REQ_NOWAIT for linear and raid0, which only remap bios to their underlying devices; stacked limits will still clear the feature if any component device lacks REQ_NOWAIT support.

wifi: mt76: mt7996: clear stale link state on full reset

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: clear stale link state on full reset After a full chip reset, mac80211 reconfig replays interface, link and channel context setup. mt7996_vif_link_add() short-circuits when the link_id is still marked in mvif->valid_links, a state introduced for postponing link teardown to interface removal. The reset path frees the link structures without clearing those bits, so the replayed setup never re-creates dev_info/bss_info/STA records in the restarted firmware and never re-registers the link wcid, leaving the device inoperative. The reset path also leaks every allocated MLD index: per-link indices and the per-vif group/remap indices are re-allocated from scratch during reconfig, but the old bits stay set in the masks, so repeated full resets exhaust the index space. Clear valid_links in the reset vif iterator and reset the MLD index masks alongside the existing omac_mask clearing.

fuse: Fix the condition to enable over-io-uring

In the Linux kernel, the following vulnerability has been resolved: fuse: Fix the condition to enable over-io-uring The existing condition in fuse_uring_cmd() is there only to avoid disabling io-uring for connections that already run with it, missing was a condition to refuse any IORING_OP_URING_CMD if the connection/channel didn't get enabled because of missing FUSE_INIT reply flag FUSE_OVER_IO_URING. Without the reply flag the barrier in fuse_uring_ready() doesn't work and IO could already be going on and cause deadlock states (at a minimum one between fch->bg_lock and queue->lock). The change itself is trivial, but brings behavior change, FUSE_OVER_IO_URING has to be set in the FUSE_INIT_REPLY by fuse servers to accept any IORING_OP_URING_CMD. Libfuse does that and the only non-libfuse implementation I found (fractal-fuse) also does it. Qemu patches for fuse-io-uring are not merged yet, as far as I know. Moved up is the smp_load_acquire(&fch->initialized) check, as a fuse-server implementation might try to setup io-uring before FUSE_INIT is processed and might have gotten -EOPNOTSUPP instead of -EAGAIN. Also fixed is a stale comment that explains the handling of the FUSE_OVER_IO_URING flag in early RFC versions. If there should be a report from any library or application we probably need to revert this commit.

wifi: cfg80211: undo netns switch if renaming the wiphy fails

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: undo netns switch if renaming the wiphy fails Once all the interfaces have been moved, cfg80211_switch_netns() moves the wiphy itself by setting its network namespace and then renaming it, which makes sysfs move it. The rename can fail (but only on allocation failures), leaving things mixed up and hitting the warning there. Ignoring it isn't great, undo the move and let the change fail in this case. If undo fails then WARN, then things would again be stuck in two different network namespaces.

OpenJDK: missing checks for proper initialization in ObjectStreamClass (Serialization, 8103671)

Unspecified vulnerability in Oracle Java SE 6u101, 7u85, and 8u60, and Java SE Embedded 8u51, allows remote attackers to affect confidentiality, integrity, and availability via unknown vectors related to Serialization.

kernel: leak of sensitive information due to uninitialized data in stex_queuecommand_lck() in drivers/scsi/stex.c

drivers/scsi/stex.c in the Linux kernel through 5.19.9 allows local users to obtain sensitive information from kernel memory because stex_queuecommand_lck lacks a memset for the PASSTHRU_CMD case.

Memory corruption (double free / use-after-free) vulnerability in core string handling impacts Qt for MCUs

A defect in the Qt for MCUs core string handling causes heap memory corruption. When an application passes text into Qt Quick Ultralite using the public Qul::String interface type, and that text is held in a std::string, the conversion to the internal string type copies the pointer without taking ownership of it. Two objects then release the same memory, producing a double free, an invalid free, or a use-after-free.

Improper Initialization in UEFI Firmware Enables Information Disclosure on Intel Platforms

Improper initialization in the UEFI firmware for some Intel platforms within Ring 0: Bare Metal OS may allow an information disclosure. System software adversary with a privileged user combined with a high complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

sqlite: malformed window-function query leads to DoS

SQLite through 3.31.1 allows attackers to cause a denial of service (segmentation fault) via a malformed window-function query because the AggInfo object's initialization is mishandled.

glibc: LD_PREFER_MAP_32BIT_EXEC not ignored in setuid binaries

On the x86-64 architecture, the GNU C Library (aka glibc) before 2.31 fails to ignore the LD_PREFER_MAP_32BIT_EXEC environment variable during program execution after a security transition, allowing local attackers to restrict the possible mapping addresses for loaded libraries and thus bypass ASLR for a setuid program.

mm/huge_memory: initialise workingset state before folio split

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: initialise workingset state before folio split xas_try_split() adds __GFP_ACCOUNT for page-cache xa_nodes, but __folio_split() leaves the xa_state's xa_lru unset. That lets a live, memcg-charged xa_node exist without being linked into the mapping's shadow_nodes list_lru; when reclaim later walks the list_lru it trips VM_WARN_ON(!css_is_dying()). Use mapping_set_update() to install both the workingset update callback and the shadow_nodes list_lru on the xa_state.

Improper initialization in the firmware for some Intel(R) Processors may allow a privileged user to potentially enable a denial of service via local access.