CVE-2026-97527

scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock The fcport->unsol_ctx_head list is modified from several contexts without a common lock. Entries are added in qla2xxx_process_purls_iocb() from the response queue ISR (under the qpair qp_lock), while they are removed from qla2xxx_process_purls_pkt() (DPC/purex worker), qla_nvme_xmt_ls_rsp() (NVMe-FC transport callback) and qla_nvme_release_lsrsp_cmd_kref() (SRB completion). The qpair qp_lock cannot serialize this per-fcport list since multiqueue adapters add entries through different qpairs, so a concurrent add and delete (or two concurrent deletes) can corrupt the list pointers. Introduce a dedicated per-fcport spinlock, unsol_ctx_lock, initialized in qla2x00_alloc_fcport(), and take it around every list_add_tail()/list_del() on unsol_ctx_head. The add nests under the existing qp_lock; no delete path takes qp_lock, so the lock order is consistent and deadlock free.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-98539

fs/ntfs3: use d_instantiate_new() in ntfs_create_inode() and murder syzbot's "WARNING in do_new_mount" saga

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: use d_instantiate_new() in ntfs_create_inode() and murder syzbot's "WARNING in do_new_mount" saga ntfs_create_inode() creates a new inode via ntfs_new_inode(). It hashes it with insert_inode_locked() and so it's marked as I_NEW until unlock_new_inode(). ntfs 3 calls d_instantiate() in between though... Since the dentry was already hashed by the lookup before the create any path walk finds it without touching the parent's i_rwsem and so can lock the inode. If the inode is a directory unlock_new_inode() calls lockdep_annotate_inode_mutex_key() and marks i_rwsem with the i_mutex_dir_key class. That resets the count and the owner of a lock somebody else may already hold by now... syzbot has been spamming us with the same godforsaken bug "WARNING in do_new_mount" since 2023. I can't take it anymore so I went looking. Afaict, syzbot's executor chdirs into a freshly mounted ntfs3 image, creates a directory and then mounts some pseudofs on it. Everytime the mkdir() takes longer than syzbot waits mount() runs concurrently: mkdir("./sys") mount(NULL, "./sys", "sysfs") ntfs_create_inode() d_instantiate() user_path_at() finds the dentry do_lock_mount() inode_lock(inode) namespace_lock() unlock_new_inode() lockdep_annotate_inode_mutex_key() init_rwsem(&inode->i_rwsem) unlock_mount() inode_unlock(inode) The mount side then releases a lock that according to the rwsem nobody holds: DEBUG_RWSEMS_WARN_ON((rwsem_owner(sem) != current) && ...): count = 0x0, magic = 0xffff888043a854e8, owner = 0x0, curr 0xffff888000244880, list empty WARNING: CPU: 0 PID: 5346 at kernel/locking/rwsem.c:1368 __up_write Call Trace: inode_unlock include/linux/fs.h:877 [inline] unlock_mount fs/namespace.c:2892 [inline] do_new_mount_fc fs/namespace.c:3828 [inline] do_new_mount+0x777/0xa40 fs/namespace.c:3887 On PREEMPT_RT the same thing shows up as DEBUG_LOCKS_WARN_ON(rt_mutex_owner(lock) != current) WARNING: kernel/locking/rtmutex_common.h:193 at rt_mutex_slowunlock The up_write() underflows the reset count. A following inode_lock() on that directory then never returns. A path walk into the new directory racing with the mkdir() corrupts the lock the same way via inode_lock_shared() in lookup_slow(). Switch to d_instantiate_new() and drop the trailing unlock_new_inode(). All error paths bail out before that point with I_NEW still set and keep using discard_new_inode(). May we never see this fscking bug report again.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-98562

net: libwx: fix races in Tx timestamp handling

In the Linux kernel, the following vulnerability has been resolved: net: libwx: fix races in Tx timestamp handling wx->ptp_tx_skb is shared between the Tx path, the PTP auxiliary worker and the timestamp cleanup paths. The WX_STATE_PTP_TX_IN_PROGRESS bit prevents multiple Tx paths from submitting timestamp requests, but does not serialize the worker against cleanup. As a result, wx_ptp_clear_tx_timestamp() can free an skb after wx_ptp_tx_hwtstamp_work() has obtained its pointer. The worker may then pass the freed skb to skb_tstamp_tx() and release the same reference again. The cleanup path may also clear the in-progress bit while the worker is still processing the old skb. This allows the Tx path to publish a new skb which the worker can subsequently overwrite with NULL, leaking its reference. Add a dedicated spinlock to protect publication and consumption of the Tx timestamp skb. Detach the skb and clear the in-progress bit while holding the lock, then deliver the timestamp and release the skb after dropping it. Use the same locked cleanup in the quiesce path, but keep the detach there free of register accesses: quiesce runs during PCIe error recovery, where MMIO is not reliable, and it deliberately did not touch the device before. The lock is taken with interrupts disabled, because netpoll can call ndo_start_xmit() with hard interrupts already off. When handling a Tx DMA mapping failure, keep the transmit path reference until after comparing the skb under the lock. This prevents skb address reuse from making the error path mistake a newer timestamp request for the failed one.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-98587

firewire: cdev: fix back-transition for iso_resource_auto client resource

In the Linux kernel, the following vulnerability has been resolved: firewire: cdev: fix back-transition for iso_resource_auto client resource The todo member of iso_resource_auto structure represents the state of the client resource and normally transitions in the following order: ISO_RES_AUTO_ALLOC -> ISO_RES_AUTO_REALLOC -> ISO_RES_AUTO_DEALLOC However, concurrent access from the work item and the file descriptor release function can cause the state to transition backwards from ISO_RES_AUTO_DEALLOC to ISO_RES_AUTO_REALLOC. Prevent the back-transition by checking the current state before updating it in the work item.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-64026

rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsg

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsg This improves the fix for CVE-2026-43500. Fix the pagecache corruption from in-place decryption of a DATA packet transmitted locally by splice() by getting rid of the packet sharing in the I/O thread and unconditionally extracting the packet content into a bounce buffer in which the buffer is decrypted. recvmsg() (or the kernel equivalent) then copies the data from the bounce buffer to the destination buffer. The sk_buff then remains unmodified. This has an additional advantage in that the packet is then arranged in the buffer with the correct alignment required for the crypto algorithms to process directly. The performance of the crypto does seem to be a little faster and, surprisingly, the unencrypted performance doesn't seem to change much - possibly due to removing complexity from the I/O thread. Yet another advantage is that the I/O thread doesn't have to copy packets which would slow down packet distribution, ACK generation, etc.. The buffer belongs to the call and is allocated initially at 2K, sufficiently large to hold a whole jumbo subpacket, but the buffer will be increased in size if needed. However, to take this work, MSG_PEEK may cause a later packet to be decrypted into the buffer, in which case the earlier one will need re-decrypting for a subsequent recvmsg(). Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so switch to using USHRT_MAX to indicate an invalid offset. Note also that I would generally prefer to replace the buffers of the current sk_buff with a new kmalloc'd buffer of the right size, ditching the old data and frags as this makes the handling of MSG_PEEK easier and removes the re-decryption issue, but this looks like quite a complicated thing to achieve. skb_morph() looks half way to what I want, but I don't want to have to allocate a new sk_buff.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-53361

af_unix: Set gc_in_progress to true in unix_gc().

In the Linux kernel, the following vulnerability has been resolved: af_unix: Set gc_in_progress to true in unix_gc(). Igor Ushakov reported that unix_gc() could run with gc_in_progress being false if the work is scheduled while running: Thread 1 Thread 2 Thread 3 -------- -------- -------- unix_schedule_gc() unix_schedule_gc() `- if (!gc_in_progress) `- if (!gc_in_progress) |- gc_in_progress = true | `- queue_work() | unix_gc() <----------------/ | | |- gc_in_progress = true ... `- queue_work() | | `- gc_in_progress = false | | unix_gc() <---------------------------------------------' | ... /* gc_in_progress == false */ | `- gc_in_progress = false unix_peek_fpl() relies on gc_in_progress not to confuse GC by MSG_PEEK. Let's set gc_in_progress to true in unix_gc().

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-53357

Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del() bt_accept_dequeue() unlinks a not-yet-accepted child from the parent accept queue and release_sock()s it before returning, so the returned sk has no caller reference and is unlocked. l2cap_sock_cleanup_listen() walks these children on listening-socket close. A concurrent HCI disconnect drives hci_rx_work -> l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and frees the child sk and its l2cap_chan; cleanup_listen() then uses both: BUG: KASAN: slab-use-after-free in l2cap_sock_kill l2cap_sock_kill / l2cap_sock_cleanup_listen / __x64_sys_close Freed by: l2cap_conn_del -> l2cap_sock_close_cb -> l2cap_sock_kill This is distinct from the two fixes already in this area: commit e83f5e24da741 ("Bluetooth: serialize accept_q access") serialises the accept_q list/poll and takes temporary refs inside bt_accept_dequeue(), and CVE-2025-39860 serialises the userspace close()/accept() race by calling cleanup_listen() under lock_sock() in l2cap_sock_release(). Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF still reproduces on current bluetooth/master. Take the reference at the source: bt_accept_dequeue() does sock_hold() while sk is still locked, before release_sock(); callers sock_put(). cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under the parent sk lock and that would invert conn->lock -> chan->lock -> sk_lock (lockdep). KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced 12 use-after-free reports per run before this change; 0, and no lockdep report, over 1600+ raced iterations after it on bluetooth/master.

CVSS 3.1 · 8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-46027

net/smc: avoid early lgr access in smc_clc_wait_msg

In the Linux kernel, the following vulnerability has been resolved: net/smc: avoid early lgr access in smc_clc_wait_msg A CLC decline can be received while the handshake is still in an early stage, before the connection has been associated with a link group. The decline handling in smc_clc_wait_msg() updates link-group level sync state for first-contact declines, but that state only exists after link group setup has completed. Guard the link-group update accordingly and keep the per-socket peer diagnosis handling unchanged. This preserves the existing sync_err handling for established link-group contexts and avoids touching link-group state before it is available.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-31548

wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down When the nl80211 socket that originated a PMSR request is closed, cfg80211_release_pmsr() sets the request's nl_portid to zero and schedules pmsr_free_wk to process the abort asynchronously. If the interface is concurrently torn down before that work runs, cfg80211_pmsr_wdev_down() calls cfg80211_pmsr_process_abort() directly. However, the already- scheduled pmsr_free_wk work item remains pending and may run after the interface has been removed from the driver. This could cause the driver's abort_pmsr callback to operate on a torn-down interface, leading to undefined behavior and potential crashes. Cancel pmsr_free_wk synchronously in cfg80211_pmsr_wdev_down() before calling cfg80211_pmsr_process_abort(). This ensures any pending or in-progress work is drained before interface teardown proceeds, preventing the work from invoking the driver abort callback after the interface is gone.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-23275

io_uring: ensure ctx->rings is stable for task work flags manipulation

In the Linux kernel, the following vulnerability has been resolved: io_uring: ensure ctx->rings is stable for task work flags manipulation If DEFER_TASKRUN | SETUP_TASKRUN is used and task work is added while the ring is being resized, it's possible for the OR'ing of IORING_SQ_TASKRUN to happen in the small window of swapping into the new rings and the old rings being freed. Prevent this by adding a 2nd ->rings pointer, ->rings_rcu, which is protected by RCU. The task work flags manipulation is inside RCU already, and if the resize ring freeing is done post an RCU synchronize, then there's no need to add locking to the fast path of task work additions. Note: this is only done for DEFER_TASKRUN, as that's the only setup mode that supports ring resizing. If this ever changes, then they too need to use the io_ctx_mark_taskrun() helper.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-98624

netfilter: nfnetlink_queue: hold nfnl mutex in event notifier

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: hold nfnl mutex in event notifier We must serialize the release notifier and the config netlink function. A concurrent thread can issue close() which can call the release function while unrelated socket processes UNBIND request for same portid: Oops: general protection fault, [..] RIP: 0010:__instance_destroy+0x60/0x210 [nfnetlink_queue] Call Trace: nfqnl_recv_config+0x9b0/0xdc0 [nfnetlink_queue] nfnetlink_rcv_msg+0x7c2/0xeb0 ? __pfx_nfnetlink_rcv_msg+0x10/0x10 After this, parallel UNBIND and URELEASE events are impossible. This change isn't nice, but its the shortest fix given instances are not refcounted and the nfnetlink config callback drops the rcu read lock early due to need for sleeping allocations.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-89655

ceph: fix UAF in __kick_flushing_caps() on cf entry freed during unlock

In the Linux kernel, the following vulnerability has been resolved: ceph: fix UAF in __kick_flushing_caps() on cf entry freed during unlock list_for_each_entry() iterates ci->i_cap_flush_list but drops i_ceph_lock to send cap messages. During the unlock window, handle_cap_flush_ack() can acquire i_ceph_lock, detach cf entries with tid <= flush_tid from the list, release i_ceph_lock, and free them via ceph_free_cap_flush() outside any lock. When the original thread reacquires i_ceph_lock and the for-loop macro advances via cf = list_next_entry(cf, i_list), it dereferences cf->i_list.next on freed memory. The race timeline: __kick_flushing_caps() handle_cap_flush_ack() ----------------------- ----------------------- holds i_ceph_lock <--- iterates to cf (tid=10) prepares FLUSH message drops i_ceph_lock <--- __send_cap() ── FLUSH(tid=10) MDS sends FLUSH_ACK(tid=10) ---> acquires i_ceph_lock cf->tid(10) <= flush_tid(10), detaches cf from i_cap_flush_list drops i_ceph_lock ceph_free_cap_flush(cf) <- frees it! acquires i_ceph_lock <--- for-loop advances: cf = list_next_entry(cf, i_list) -- UAF on freed cf->i_list.next The cf was just sent by __kick_flushing_caps itself via __send_cap(). The MDS may respond with FLUSH_ACK quickly enough that handle_cap_flush_ack() frees cf before __kick_flushing_caps can finish the iteration. Fix by converting to a manual while loop: save the next pointer under i_ceph_lock before dropping it, then use the saved pointer after reacquiring, so the potentially-freed cf is never accessed again.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-80548

s390/vfio_ccw: Selectively expand io_mutex

In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Selectively expand io_mutex The io_mutex was defined to serialize the io_regions, but then has also sort of been associated with the I/O themselves because of the close relationship they share. With the handful of races that are possible, the choices are either to: A) expand the scope of io_mutex to close these remaining windows, or B) reduce the scope of io_mutex to just io_region, and introduce a new lock mechanism for the remaining I/O resources This patch implements A, since B brings with it a lot more interactions that would need to be tracked and kept in a correct hierarchy. It also takes advantage of the workqueue element for cp_free() that now gets called out of fsm_notoper(), which could be invoked out of an interrupt context and thus cannot acquire a mutex itself.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-74607

KVM: SVM: Serialize accesses to the owner and mirror list with separate lock

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Serialize accesses to the owner and mirror list with separate lock Interaction between KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM and KVM_CAP_VM_COPY_ENC_CONTEXT_FROM can cause two separate issues: - in sev_migrate_from(), when the destination KVM is a mirror, the mirror entry is moved from the source's list to the owner's mirror_vms list, without holding the owner's lock unlike other writers of the owner's mirror list (sev_vm_copy_enc_context_from(), sev_vm_destroy()). A concurrent COPY or destroy can race with sev_migrate_from() and corrupt the list. - In sev_vm_destroy(), the *owner* is still active and could receive concurrently a KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM that causes sev->enc_context_owner to change. In this case the incorrect VM receives kvm_put_kvm(). The second issue needs particular care because the owner could disappear altogether (even though the race window is impossibly small) between reading it and locking it. There is thus no way to perform the checks under the owner lock without putting struct kvm under SLAB_TYPESAFE_BY_RCU (which would allow kvm_get_kvm_safe() under RCU critical section). It is much simpler to just use a global lock, since the critical sections are so small and the new lock is always a leaf lock.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-74365

nvdimm/btt: Handle preemption in BTT lane acquisition

In the Linux kernel, the following vulnerability has been resolved: nvdimm/btt: Handle preemption in BTT lane acquisition BTT lanes serialize access to per-lane metadata and workspace state during BTT I/O. The btt-check unit test reports data mismatches during BTT writes due to a race in lane acquisition that can lead to silent data corruption. The existing lane model uses a spinlock together with a per-CPU recursion count. That recursion model stopped being valid after BTT lanes became preemptible: another task can run on the same CPU, observe a non-zero recursion count, bypass locking, and use the same lane concurrently. BTT lanes are also held across arena_write_bytes() calls. That path reaches nsio_rw_bytes(), which flushes writes with nvdimm_flush(). Some provider flush callbacks can sleep, making a spinlock the wrong primitive for the lane lifetime. Replace the spinlock-based recursion model with a dynamically allocated per-lane mutex array and take the lane lock unconditionally. Add might_sleep() to catch any future atomic-context caller. Found with the ndctl unit test btt-check.sh.

CVSS 3.1 · 7.3 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-74334

RDMA/nldev: Fix locking when accessing mr->pd

In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: Fix locking when accessing mr->pd Sashiko points out that, due to rereg_mr, the PD is actually variable and all the touches in nldev are racy. Use mr->device instead of mr->pd->device. Getting the PD restrack ID is more tricky. To avoid disturbing all the happy paths, add an rdma_restrack_sync() operation which is sort of like flush_workqueue() or synchronize_irq(): after it returns, all the old nldev touches to the mr are gone and everything sees the new PD. This makes it safe to reach into the PD pointer.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-74262

kcm: use WRITE_ONCE() when changing lower socket callbacks

In the Linux kernel, the following vulnerability has been resolved: kcm: use WRITE_ONCE() when changing lower socket callbacks kcm_attach() replaces a live lower TCP socket's sk_data_ready and sk_write_space callbacks with KCM handlers, and kcm_unattach() restores them later. Those callback-pointer updates are still plain stores even though the same fields can be read and invoked concurrently on other CPUs. If another CPU observes an older callback snapshot after the live field has already been restored, callback execution can run with a mismatched target and sk_user_data state, leading to stale or misdirected wakeups. Use WRITE_ONCE() for the callback replacement and restore operations so these shared callback fields follow the same visibility contract already established by the earlier 4022 fixes.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-72221

sunrpc: wait for in-flight TLS handshake callback when cancel loses race

In the Linux kernel, the following vulnerability has been resolved: sunrpc: wait for in-flight TLS handshake callback when cancel loses race When wait_for_completion_interruptible_timeout() in svc_tcp_handshake() returns 0 (timeout) or -ERESTARTSYS (signal) and tls_handshake_cancel() then returns false, handshake_complete() has won the cancellation race: it has set HANDSHAKE_F_REQ_COMPLETED and is about to invoke svc_tcp_handshake_done(), but the callback's side effects on xpt_flags and on svsk->sk_handshake_done have not yet committed. The current code reads xpt_flags immediately to decide whether the session succeeded. Two races result. If the callback has executed set_bit(XPT_TLS_SESSION) but not yet clear_bit(XPT_HANDSHAKE), svc_tcp_handshake() sees a session, enqueues the transport, and returns. svc_xprt_received() then clears XPT_BUSY, a worker thread picks the transport up, the dispatcher in svc_handle_xprt() observes XPT_HANDSHAKE still set, and xpo_handshake is invoked a second time. That svc_tcp_handshake() calls init_completion(&svsk->sk_handshake_done) while the original callback concurrently calls complete_all() on it, corrupting the embedded swait_queue. If the callback has set HANDSHAKE_F_REQ_COMPLETED but not yet entered svc_tcp_handshake_done(), svc_tcp_handshake() reads XPT_TLS_SESSION as clear and tears the connection down even though the handshake is about to succeed. Wait for the callback to commit before inspecting xpt_flags. The completion is guaranteed to fire because handshake_complete() invokes svc_tcp_handshake_done() unconditionally once it has set HANDSHAKE_F_REQ_COMPLETED.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-72119

can: bcm: extend bcm_tx_lock usage for data and timer updates

In the Linux kernel, the following vulnerability has been resolved: can: bcm: extend bcm_tx_lock usage for data and timer updates Stage new CAN frame content for an existing tx op into a kmalloc()'d buffer and validate it there, mirroring the approach already used in bcm_rx_setup(). Only copy the validated data into op->frames while holding op->bcm_tx_lock, so bcm_can_tx() and bcm_tx_timeout_handler() can no longer observe a partially updated or unvalidated frame. Add a missing error path for memcpy_from_msg() when copying CAN frame data from userspace. Also move the kt_ival1/kt_ival2/ival1/ival2 updates in bcm_tx_setup() under op->bcm_tx_lock, and read kt_ival1/kt_ival2/count under the same lock in bcm_tx_set_expiry() and bcm_tx_timeout_handler(), closing the torn 64-bit ktime_t read on 32-bit platforms.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-72115

can: bcm: track a single source interface for ANYDEV timeout/throttle ops

In the Linux kernel, the following vulnerability has been resolved: can: bcm: track a single source interface for ANYDEV timeout/throttle ops An ANYDEV rx op (ifindex == 0) with an active RX timeout and/or throttle timer has no defined semantics when matching frames arrive from several interfaces: bcm_rx_handler() can run concurrently for the same op on different CPUs, racing hrtimer_cancel()/ bcm_rx_starttimer() against bcm_rx_timeout_handler() and causing spurious RX_TIMEOUT notifications and last_frames corruption. The same concurrency lets throttled multiplex frames from different interfaces clobber the single rx_ifindex/rx_stamp fields shared by the op. Add op->if_detected to track the first interface that delivers a matching frame while a timeout/throttle timer is configured, and reject frames from any other interface for that op. The claim is decided in bcm_rx_handler() before hrtimer_cancel() touches op->timer, so a rejected frame can never disturb the claimed interface's watchdog. RTR-mode ops are excluded via RX_RTR_FRAME, independent of kt_ival1/kt_ival2, since those may briefly hold a stale value from an earlier non-RTR configuration. The claim is released in bcm_notify() on NETDEV_UNREGISTER and in bcm_rx_setup() when SETTIMER reconfigures the timer values. A (re-)claim is only possible on CAN devices in NETREG_REGISTERED dev->reg_state to cover the release in bcm_notify() where reg_state becomes NETREG_UNREGISTERING until synchronize_net().

CVSS 3.1 · 8.1 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel