Use-after-free in the JavaScript Engine: JIT component
Use-after-free in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5.
Use-after-free in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5.
The AVDTP signalling layer arms a 6-second command timeout (AVDTP_TIMEOUT) in avdtp_send_cmd() whenever the local device issues an AVDTP request. Every response handler in subsys/bluetooth/host/classic/avdtp.c cancels session->timeout_work before clearing the pending request, but bt_avdtp_l2cap_disconnected() only cleared session->req and left the delayable work armed. The struct bt_avdtp session is the first member of struct bt_a2dp, whose instances live in a static per-connection array, and a2dp_get_connection() in subsys/bluetooth/host/classic/a2dp.c wipes a slot with memset() as soon as session->br_chan.chan.conn is NULL — which the L2CAP layer arranges immediately after the disconnect callback returns. A remote Bluetooth BR/EDR peer triggers the condition by opening the AVDTP signalling channel, letting the local application issue an AVDTP procedure (the standard A2DP flow issues bt_a2dp_discover() from the connected callback), then tearing the signalling channel down without responding and re-opening it within the remaining timeout window. The reconnect reaches a2dp_accept() → a2dp_get_connection(), which zeroes the whole struct bt_a2dp while the work item's struct _timeout is still linked into the kernel's global timeout list. Both the disconnect and the reconnect instants are chosen by the attacker, so no race has to be won; an encrypted BR/EDR link is required, and CONFIG_BT_A2DP (experimental) must be enabled. With the default CONFIG_TIMEOUT_BACKEND_DLIST backend the kernel decides a timeout is inactive by testing whether its list node is linked, so after the memset() the kernel treats a node that is still on the global timeout list as free: the announce path pops a node whose links and handler pointer are NULL, and the next bt_work_reschedule() on the recycled session re-inserts the same node into a list that already contains it. The consequence is corruption of the single kernel data structure every timer, timeslice and sleep depends on — writes through zeroed or stale list pointers and a NULL handler dispatch — producing a system-wide crash or hang rather than a fault confined to the A2DP session. The fix cancels session->timeout_work at the top of bt_avdtp_l2cap_disconnected() and moves k_work_init_delayable() from avdtp_send_cmd() to the session-establishment paths bt_avdtp_connect() and bt_avdtp_l2cap_accept(), so the work item is always initialized before a disconnect callback can run.
Use after free in Media in Google Chrome prior to 155.0.8059.79 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Critical)
Privilege escalation due to use-after-free in the Graphics: WebGPU component. This vulnerability was fixed in Thunderbird 157 and Firefox 157.
ImageMagick 7.1.0-20 before 7.1.2-32 contains a use after free vulnerability in the -fx option that occurs when a memory allocation fails during a specific operation. Attackers who can supply crafted -fx expressions under memory pressure can trigger freed memory access, causing crashes or memory corruption.
Sandbox escape due to use-after-free in the DOM: Content Processes component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 140.17, Thunderbird 153.4, Firefox 157, Firefox ESR 115.42, and Firefox ESR 140.17.
FreeRDP 2.1.0 before 3.32.0 contains a use-after-free vulnerability in the static rdpsnd channel disconnect path, which frees audio formats and device without joining play_thread. A malicious RDP server can disconnect while asynchronous Wave2 playback processes queued PDUs, causing the client to read freed heap memory and crash.
ImageMagick before 6.9.13-57 and 7.x before 7.1.2-32 contains a use after free vulnerability in the PDF writer when writing CMYK images with JPEG2000 compression. Attackers can supply a crafted CMYK image that, when written to PDF with JPEG2000 compression, causes freed memory to be reused, potentially crashing the process.
In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: Fix use-after-free in path file creation cleanup In the error path of rtrs_srv_create_path_files(), the sysfs root folders may already have been created and srv_path->kobj may already have been initialized. If a later step fails, the cleanup currently calls kobject_put(&srv_path->kobj) before rtrs_srv_destroy_once_sysfs_root_folders(srv_path). kobject_put() may drop the last reference to srv_path->kobj and invoke the release callback, rtrs_srv_release(), which frees srv_path. The following call to rtrs_srv_destroy_once_sysfs_root_folders(srv_path) then dereferences srv_path internally to access srv_path->srv, resulting in a use-after-free. This failure path is reached before rtrs_srv_create_path_files() returns success, so the successful-path lifetime handling is not involved. Fix this by destroying the sysfs root folders before calling kobject_put(&srv_path->kobj), so srv_path is still valid while the helper accesses it. This issue was found by a static analysis tool I am developing.
Use-after-free in the DOM: UI Events & Focus Handling component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 153.4, and Firefox 157.
In the Linux kernel, the following vulnerability has been resolved: gpio: aggregator: fix a potential use-after-free On error we free aggr->lookups->dev_id before removing the entry from the lookup table. If a concurrent thread calls gpiod_find() before we remove the entry, it could iterate over the list and call gpiod_match_lookup_table() which unconditionally dereferences dev_id when calling strcmp(). Reverse the order of cleanup.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix durable reconnect error path file lifetime After a durable reconnect succeeds, ksmbd_reopen_durable_fd() republishes the same ksmbd_file into the session volatile-id table. If smb2_open() then takes a later error path, cleanup first calls ksmbd_fd_put(work, fp) and then unconditionally calls ksmbd_put_durable_fd(dh_info.fp). In this case fp and dh_info.fp are the same object. The first put drops the reconnect lookup reference, but the final durable put can run __ksmbd_close_fd(NULL, fp). Because the final close is not session-aware, it can free the file object without removing the volatile-id entry that was just published into the session table. Use the session-aware put for the final reconnect drop when the reconnect had already succeeded and the error path is cleaning up the republished file. Earlier reconnect failures, before fp is assigned to dh_info.fp, keep using the durable-only put path.
In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix use-after-free in llcp_sock_release() llcp_sock_release() unconditionally unlinks the socket from the local sockets list. However, if the socket is still in connecting state, it is on the connecting list. Fix this by checking the socket state and unlinking from the correct list.
In the Linux kernel, the following vulnerability has been resolved: arm64: hibernate: pass HVC_SET_VECTORS args to the resume hvc swsusp_arch_suspend_exit() reinstalls the restored kernel's hyp stub vectors with an hvc, but never passes the arguments. x0 is not set to HVC_SET_VECTORS and x1 is not set to the vector address, so the stub dispatch falls through and returns without writing vbar_el2. EL2 is left pointing at the trans_pgd copy of the vectors, a page that swsusp_free() releases right after resume. Set the arguments up the same way __hyp_set_vectors() does. Without this fix, Vladimir was able to trigger a hang when resuming from hibernation with CONFIG_PAGE_POISONING=y and page_poison=on.
In the Linux kernel, the following vulnerability has been resolved: net: dsa: mxl862xx: disable the stats poll on teardown mxl862xx_setup() arms the stats poll before mxl862xx_setup_mdio(), and nothing stops it until dsa_register_switch() has returned an error to mxl862xx_probe(). DSA frees the dsa_port list before it returns, so a poll that fires once .setup or a later step of dsa_tree_setup() has failed walks freed ports. On shutdown the user ports stay registered, and the WORK_STOPPED flag test in mxl862xx_get_stats64() is not atomic with the cancel in mxl862xx_shutdown(), so a re-arm that read the flag before it was set queues the poll after cancel_delayed_work_sync() has returned. Arm the poll once .setup has succeeded and stop it from a .teardown op, which DSA calls on unregister and after a failed registration, in both cases before it frees the ports. Use disable_delayed_work_sync() there and in shutdown(): it drains a running poll as the cancel did and turns every later attempt to queue the work into a no-op, so the re-arm cannot bring the poll back. remove() and the probe error path only set WORK_STOPPED, which crc_err_work tests before it walks the ports.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: coredump: Quiesce dump work on unregister hci_devcd_handle_pkt_init() arms dump_timeout and coredump producers queue dump_rx without holding an hdev reference. Unregister leaves both works live, so disconnecting during an active dump lets them access hdev after hci_release_dev() frees it. Shut down coredump processing during unregister. Close the producer gate under dump_q.lock before disabling both works, then free the active buffer and queued packets under hci_dev_lock. Serializing the gate with enqueue prevents controller-specific workers from adding packets after the final purge.
In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Use managed KMS polling to fix UAF on unbind vc4_kms_load() calls drm_kms_helper_poll_init() but the driver provides no matching drm_kms_helper_poll_fini(). The output poll work stays scheduled after unbind and runs on the freed drm_device: # modprobe vc4; rmmod vc4; sleep 10 BUG: KASAN: slab-use-after-free in delayed_work_timer_fn BUG: KASAN: slab-use-after-free in drm_client_dev_hotplug [drm] Workqueue: events output_poll_execute [drm_kms_helper] Allocated by task 171: __devm_drm_dev_alloc Freed by task 262 (rmmod): drm_dev_put / component_del Use drmm_kms_helper_poll_init() so polling is finalized with the device, as other drivers do.
In the Linux kernel, the following vulnerability has been resolved: rust: devres: fix race between concurrent revokers There is a potential race condition when two paths try to revoke a Devres concurrently. The driver core's devres_release_all() calls Revocable::revoke() via the release callback, while Devres::drop() calls revoke_nosync() on another CPU. The revoker that does not claim the is_available swap returns immediately, but the revoker that did may still be executing drop_in_place() on the inner data. This can cause a use-after-free when the other revoker's caller proceeds to drop adjacent resources that drop_in_place() still references (e.g., Devres<DmaMappedSgt> racing with SGTable freeing the backing sg_table and pages). Fix this by adding a Completion. The release callback signals the Completion after revoke() finishes, and Devres::drop() waits for it when it loses the is_available swap. This ensures the wrapped object is fully torn down before Devres::drop() returns.
In the Linux kernel, the following vulnerability has been resolved: netlink: do not free nlk->groups while lockless readers can use it netlink_realloc_groups() uses krealloc() under netlink_table_grab(). Whenever NLGRPSZ(groups) lands in a different kmalloc bucket, the old bitmap is freed immediately. Two readers of nlk->groups / nlk->ngroups do not hold the netlink table lock: 1) sk_diag_dump_groups(). Hashed (bound) sockets are dumped from the rhashtable walk in __netlink_diag_dump(), which only holds RCU. Only the mc_list part of the dump takes nl_table_lock. 2) netlink_native_seq_show() (/proc/net/netlink), whose walk has been lockless since commit 21e4902aea80 ("netlink: Lockless lookup with RCU grace period in socket release"). Both can read a freed buffer, and sk_diag_dump_groups() can also read past the end of the old (smaller) buffer if it happens to load the old @groups pointer together with the new @ngroups value, copying the result into a NETLINK_DIAG_GROUPS attribute. This is the same class of bug that commit f773608026ee ("netlink: access nlk groups safely in netlink bind and getname") fixed for bind() and getname(); these two readers were missed. Simply grabbing the table lock in sk_diag_dump_groups() is not an option, because it is also called with nl_table_lock already held from the mc_list section of the dump. Make the lockless readers safe instead: - Allocate a new bitmap and free the old one after an RCU grace period, instead of relying on the implicit kfree() done by krealloc(). - Publish @groups before @ngroups, both with release semantics, and have the lockless readers load @ngroups first. A reader can then never pair the new (bigger) size with the old (smaller) buffer, and a reader picking up the new pointer while still seeing the old size is guaranteed to see the initialized bitmap. netlink_realloc_groups() is called from process context (bind() and setsockopt()), so kfree_rcu_mightsleep() can be used, once the table has been released.
In the Linux kernel, the following vulnerability has been resolved: drm/xe/i2c: Disable IRQ on unbind Currently, struct xe_i2c is freed before SGUnit IRQ is disabled in unbind path, leaving a potential UAF in case I2C IRQ is hit during this small window. Explicitly disable I2C IRQ in xe_i2c_remove() and fix this. (cherry picked from commit 8ba5c8b8ab3fd362267c11df2cd5a90ee46f6e24)