Search vulnerabilities

Results 8,919

Export CSV
CVE-2026-64463

usb: typec: tcpci_rt1711h: unregister TCPCI port with devres

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpci_rt1711h: unregister TCPCI port with devres rt1711h_probe() registers the TCPCI port before requesting the interrupt and enabling alert interrupts. If either of those later steps fails, the probe function returns without unregistering the TCPCI port. The explicit unregister currently only happens from the remove callback. Register a devres action immediately after tcpci_register_port() succeeds, so tcpci_unregister_port() runs on later probe failures and on driver detach. Drop the remove callback to avoid unregistering the same port twice. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-124683

Inefficient Algorithmic Complexity Causes Denial of Service in Eclipse Langium

Eclipse Langium versions 3.2.0 through 4.4.0 contain an inefficient algorithmic complexity issue (CWE-407) in the opt-in IndentationAwareTokenBuilder and IndentationAwareLexer. When producing DEDENT tokens, the token builder recomputes line numbers by re-scanning the entire preceding document text. A document whose indentation changes on most lines then takes quadratic time to tokenize. Because tokenization is synchronous, a crafted document of a few hundred kilobytes can block the Node.js event loop for tens of seconds. That causes a DoS for every user served by the same process. Languages built with the DefaultLexer and DefaultTokenBuilder are unaffected.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-124016

postal-mime < 4.2.1 Algorithmic Complexity DoS via processLine

postal-mime before 4.2.1 contains an algorithmic complexity denial of service vulnerability that allows unauthenticated remote attackers to cause excessive CPU consumption in the PostalMime.processLine() function by crafting deeply nested multipart email messages with boundary lines sharing long prefixes with open boundaries. Attackers can deliver a malicious email with nesting up to the default maxNestingDepth of 256, causing per-line parsing cost to scale as O(depth x shared prefix length) and blocking the Node.js event loop for seconds per message.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-122096

Apache DataSketches Java: Uncontrolled resource consumption when deserializing crafted sketch images

Uncontrolled Resource Consumption vulnerability in the sketch deserialization of Apache DataSketches Java. Several deserializers trusted sizes and counts declared in the serialized input. A small crafted input could make an application allocate an excessive amount of memory, leading to an OutOfMemoryError. A crafted string passed to FrequentLongsSketch.getInstance(String) could also make deserialization, or a later update, loop indefinitely. Only applications that deserialize sketches from untrusted sources are affected. This issue affects Apache DataSketches Java: through 9.0.0. Users are recommended to upgrade to version 9.1.0, which fixes the issue.

CVSS n/a EPSS < 1% KEV · Not listed
CVE-2026-106156

Uncontrolled Resource Consumption in Telerik UI for ASP.NET Core Server-side Aggregation

In Progress® Telerik® UI for ASP.NET Core versions `2015.1.318` through `2026.3.811`, repeated server-side aggregation requests, with or without grouping, cause dynamic assemblies and load contexts to be retained, resulting in accumulating process memory consumption. An unauthenticated remote attacker can exploit this if the application exposes an aggregation endpoint that is reachable without authentication. Repeated requests can cause memory growth that may exhaust available resources and affect application availability. Disabling grouping in the client-side interface does not prevent direct requests containing these descriptors. The issue is fixed in version `2026.3.1015`.

CVSS 3.1 · 8.6 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-106137

ClassFactory Race Condition and Retained Assembly Memory in Telerik UI for ASP.NET MVC

In affected versions of Progress® Telerik® UI for ASP.NET MVC `2012.2.710` through `2026.3.811`, ClassFactory updates a shared class dictionary without exclusive write protection and emits non-collectible dynamic assemblies that remain loaded for the AppDomain's lifetime. The dictionary lookup and insertion are not atomic, and case variations in aggregate descriptors can produce distinct retained types even though member resolution is case-insensitive. An unauthenticated remote attacker can exploit this if the application exposes an aggregation endpoint that is reachable without authentication, by submitting concurrent or repeated crafted requests. These requests may corrupt dictionary state or increase CPU and memory use, potentially degrading availability. The issue is fixed in version `2026.3.1015`.

CVSS 3.1 · 8.6 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-63835

batman-adv: v: prevent OGM aggregation on disabled hardif

In the Linux kernel, the following vulnerability has been resolved: batman-adv: v: prevent OGM aggregation on disabled hardif When an interface gets disabled, the worker is correctly disabled by batadv_hardif_disable_interface() -> ... -> batadv_v_ogm_iface_disable(). In this process, the skb aggr_list is also freed. But batadv_v_ogm_send_meshif() can still queue new skbs (via batadv_v_ogm_queue_on_if()) to the aggr_list. This will only stop after all cores can no longer find the RCU protected list of hard interfaces. These queued skbs will never be freed or consumed by batadv_v_ogm_aggr_work. The batadv_v_ogm_iface_disable() function must block batadv_v_ogm_queue_on_if() to avoid leak of skbs.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64509

rust: block: fix GenDisk cleanup paths

In the Linux kernel, the following vulnerability has been resolved: rust: block: fix GenDisk cleanup paths GenDiskBuilder::build() still has fallible work after __blk_mq_alloc_disk(), but its error path only recovers the foreign queue data. That leaks the temporary gendisk and request_queue until later teardown. If the caller moved the last Arc<TagSet<T>> into build(), the leaked queue can retain blk-mq state after the tag set is dropped. Fix the pre-registration failure path by dropping the temporary gendisk reference with put_disk() before recovering queue_data, so disk_release() can tear down the owned queue. Also pair GenDisk::drop() with put_disk() after del_gendisk(). Once a Rust GenDisk has been added with device_add_disk(), del_gendisk() only unregisters it; the final gendisk reference still has to be dropped to complete the release path.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-123865

Node.js is vulnerable to an HTTP/2 memory and file-descriptor leak via a protocol error during session shutdown

An unauthenticated HTTP/2 client can permanently leak Node.js server memory and file descriptors. If a peer triggers a protocol error, for example an oversized frame header, while the session is already shutting down, nghttp2 tears the session down internally but Node.js never notices, leaving a dangling session: the socket stays in CLOSE_WAIT and all of Node.js's HTTP/2 state for that connection is held in memory indefinitely, with no further cost to the attacker. The attacker can start the shutdown remotely by sending GOAWAY(NO_ERROR), so it is reliable against default HTTP/2 servers. It is an incomplete-fix case of CVE-2026-48937: that fix detected nghttp2 internal terminations by watching for GOAWAY sent while not shutting down, but missed terminations that arrive while the session is already shutting down. This vulnerability affects Node.js 26.x, 24.x, and 22.x.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-123868

Node.js is vulnerable to an HTTP/2 memory exhaustion denial of service via unaccounted inbound DATA on an undrained stream

An unauthenticated HTTP/2 client can exhaust Node.js server memory because inbound DATA queued on an undrained stream is charged to no session budget. Each inbound DATA frame creates one JavaScript Buffer view in the receiving stream's readable queue, but nothing charges that queue to current_session_memory_: the socket read buffer is accounted only during parsing and released immediately, so whatever stays queued is accounted to nothing. A peer that fills a stream's receive window with one-byte DATA frames pays about 10 wire bytes per frame while the server retains about 114 bytes per frame, so a single stream on one connection can retain hundreds of megabytes from tens of megabytes sent. maxSessionMemory neither bounds the growth nor refuses new streams, because Http2Session::CanAddStream gates admission on the same counter that never sees the queue. This vulnerability affects Node.js 26.x and 24.x.

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64461

PCI: mediatek: Fix IRQ domain leak when port fails to enable

In the Linux kernel, the following vulnerability has been resolved: PCI: mediatek: Fix IRQ domain leak when port fails to enable When mtk_pcie_enable_port() fails, mtk_pcie_port_free() removes the port from pcie->ports and frees the port structure. However, the IRQ domains set up earlier by mtk_pcie_init_irq_domain() are never freed. Fix this by refactoring mtk_pcie_irq_teardown() into a per-port helper, mtk_pcie_irq_teardown_port(), and calling it from mtk_pcie_setup() when mtk_pcie_enable_port() fails. Since the IRQ teardown must only happen in the probe error path (during resume, child devices may have active MSI mappings and the NOIRQ context prohibits sleeping locks), mtk_pcie_enable_port() is changed to return an error code so callers can distinguish the two paths and act accordingly. This issue was reported by Sashiko while reviewing the EcoNet EN7528 SoC support series.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64476

vfio/pci: Latch disable_idle_d3 per device

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Latch disable_idle_d3 per device When disable_idle_d3 was introduced in vfio-pci, it directly manipulated the device power state with pci_set_power_state(). There were no refcounts to maintain or balanced operations, we could unconditionally bring the device to D0 and conditionally move it to D3hot. Therefore the module parameter was made writable. Later, in commit c61302aa48f7 ("vfio/pci: Move module parameters to vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect of the module parameter was nullified. The parameter value could still be changed through sysfs, but the vfio-pci driver latched the values into vfio-pci-core globals at module init. Loading the vfio-pci module, or unloading and reloading, with non-default or different values could change the globals relative to existing devices bound to vfio-pci variant drivers. Runtime PM was introduced in commit 7ab5e10eda02 ("vfio/pci: Move the unused device into low power state with runtime PM"), which marks the point where power states became refcounted. PM get and put operations need to be balanced, but the same module operations noted above can change the global variables relative to those devices already bound to vfio-pci variant drivers. This introduces a window where PM operations can now become unbalanced. To resolve this with a narrow footprint for stable backports, the disable_idle_d3 flag is latched into the vfio_pci_core_device at the time of initialization, such that the device always operates with a consistent value. NB. vfio_pci_dev_set_try_reset() now unconditionally raises the runtime PM usage count around bus reset to account for disable_idle_d3 becoming a per-device rather than global flag. When this flag is set, the additional get/put pair is harmless and allows continued use of the shared vfio_pci_dev_set_pm_runtime_get() helper.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64466

rust_binder: clear freeze listener on node removal

In the Linux kernel, the following vulnerability has been resolved: rust_binder: clear freeze listener on node removal Generally userspace is supposed to explicitly clear freeze listeners before they drop the refcount on the node ref to zero, but there's nothing forcing that. Currently, in this scenario the freeze listener remains in the freeze_listeners rbtree and in the remote node's freeze listener list, even though the ref for which the listener is registered is gone. This could potentially lead to a memory leak due to a refcount cycle. Thus, remove the freeze listener in this scenario.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64464

xhci: sideband: fix ring sg table pages leak

In the Linux kernel, the following vulnerability has been resolved: xhci: sideband: fix ring sg table pages leak xhci_ring_to_sgtable() allocates a temporary pages array and uses it to build the returned sg_table with sg_alloc_table_from_pages(). The error paths free the pages array, but the success path returns the sg_table without freeing it. This leaks the temporary array every time a sideband client gets an endpoint or event ring buffer. Free the pages array after sg_alloc_table_from_pages() succeeds. The returned sg_table has its own scatterlist entries and does not depend on the temporary array after construction.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-108838

Multiple vulnerabilities that affects IBM Db2 Genius Hub

IBM Db2 Genius Hub 1.1.2, 1.1.3, 1.1.4, 1.1.5 could allow a local attacker to cause a denial of service due to uncontrolled resource consumption.

CVSS 3.1 · 3.3 Low EPSS < 1% KEV · Not listed
Vendors
Ibm
CVE-2026-63839

platform/x86: lenovo-wmi-helpers: Fix memory leak in lwmi_dev_evaluate_int()

In the Linux kernel, the following vulnerability has been resolved: platform/x86: lenovo-wmi-helpers: Fix memory leak in lwmi_dev_evaluate_int() lwmi_dev_evaluate_int() leaks output.pointer when retval == NULL (found by sashiko.dev [1]). Fix it by moving `ret_obj = output.pointer' outside of the `if (retval)' block so that it is always freed by the __free cleanup callback. No functional change intended.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products