JITServer: Pre-authentication remote Denial of Service via integer overflow infinite loop in MessageBuffer::computeRequiredCapacity()

In Eclipse OpenJ9 versions prior to 0.63.0, the JITServer component is vulnerable to a pre-authentication remote denial of service. When processing the initial 4-byte length field of an incoming TCP connection, an integer overflow in `MessageBuffer::computeRequiredCapacity()` causes the receiving compilation worker thread to enter an infinite loop consuming ~100% CPU. An unauthenticated remote attacker can exploit this by opening a small number of crafted TCP connections to exhaust the entire worker thread pool, silently halting compilation services for all connected client JVMs.

JITServer: Multiple Denial of Service vulnerabilities via out-of-bounds heap reads during message and reply parsing

In Eclipse OpenJ9 versions up to 0.63.0, the JITServer component is vulnerable to denial of service due to improper boundary checks during protocol message and reply handling. An unauthenticated remote attacker or malicious JITServer can transmit malformed network payloads that cause out-of-bounds heap reads, immediately crashing the JITServer daemon or client JVM process via a segmentation fault (SIGSEGV).

org.eclipse.parsson/parsson: Eclipse Parsson: Denial of Service via uncontrolled resource consumption in JSON parsing

In Eclipse Parsson published Maven Central artifacts before version 1.1.8, the JSON parser did not enforce a default maximum on the number of characters consumed while parsing a single JSON document. Applications that parse attacker- controlled JSON can be forced to consume excessive CPU and memory by processing very large documents, including large arrays, objects, strings, numbers, whitespace, or nested structures, resulting in a denial of service. Eclipse Parsson 1.1.8 introduces a configurable maximum parsing limit with a default limit of 15 million parser-consumed characters.

The /v1/upload/sbom endpoint extracts the iss claim from the attacker-supplied JWT with signature verification disabled, then interpolates that string into three log statements before any validation gate. Because the configured log format ("%(asctime)s - %(name)s - %(levelname)s - %(message)s") renders newlines literally, an unauthenticated attacker can forge log records that are byte-for-byte indistinguishable from PIA's genuine "Successfully authenticated project" message. PIA is an authentication broker whose logs are explicitly relied upon for incident response (DESIGN.md §5.4 lists "Token verifications" and "Errors" as events to log), so the ability to plant fake auth-success entries directly undermines the audit trail the service exists to produce.

In Eclipse BaSyx Java Server SDK versions prior to 2.0.0-milestone-10, inadequate path normalization in the Submodel HTTP API allows an unauthenticated remote attacker to perform a path traversal attack. By supplying a maliciously crafted fileName parameter during a file upload operation, an attacker can bypass intended storage boundaries and write arbitrary files to any location on the host filesystem accessible by the Java process. This can lead to Remote Code Execution (RCE) and complete system compromise.

Default Rate‑Limit Key Resolver Allows Unlimited Bypass via X‑Forwarded‑For Manipulation

In `api-gateway` versions till `1.7.3`, The default rate-limit key resolver, `ClientIpKeyResolver`, derives the per-client bucket key from the leftmost element of the `X-Forwarded-For` request header. That element is supplied by the originating HTTP client and is not validated against any trusted-proxy list. A single attacker can therefore obtain an unlimited number of independent rate-limit buckets — one per unique header value — and completely bypass the gateway's request-rate limiting on every route that uses the shipped default configuration.

Rate Limiting Bypass via Untrusted X‑Forwarded‑For Header in Eclipse Connected Services Platform API Gateway

In `api-gateway` versions till `1.7.3`, The default rate-limit key resolver, `ClientIpKeyResolver`, derives the per-client bucket key from the leftmost element of the `X-Forwarded-For` request header. That element is supplied by the originating HTTP client and is not validated against any trusted-proxy list. A single attacker can therefore obtain an unlimited number of independent rate-limit buckets — one per unique header value — and completely bypass the gateway's request-rate limiting on every route that uses the shipped default configuration.

API Gateway Bypass of Rate Limiting via Untrusted X-Forwarded-For Header

In `api-gateway` versions till `1.7.3`, The default rate-limit key resolver, `ClientIpKeyResolver`, derives the per-client bucket key from the leftmost element of the `X-Forwarded-For` request header. That element is supplied by the originating HTTP client and is not validated against any trusted-proxy list. A single attacker can therefore obtain an unlimited number of independent rate-limit buckets — one per unique header value — and completely bypass the gateway's request-rate limiting on every route that uses the shipped default configuration.

PNG decoder: a duplicate IHDR chunk after IDAT resizes the image after allocation, causing a heap out-of-bounds write

The PNG chunk reader has no notion of chunk ordering. It records whether an IDAT has been seen and whether a tRNS has already supplied transparency, but nothing prevents an IHDR being read a second time. A PNG carries exactly one IHDR and it is the first chunk. A file that places a second one after IDAT rewrites the image width, height, bit depth and pixel depth *after* the decoded-data buffer has already been allocated and filled from the original values. The pass that reverses the PNG row filters then derives its own extent from the new dimensions and walks the old allocation, moving image bytes past the end of it. The buffer is allocated by GUIX rather than supplied by the caller, so the application has no way to size it defensively. The decoder is compiled in by default.

Binary resource loader: unbounded map_id from a theme file causes a heap out-of-bounds write in the GUIX-allocated arena

`_gx_binres_pixelmap_table_load()` in the GUIX binary resource (theme) loader indexes the pixelmap table with a value read verbatim from the resource file and never bounds it against the table size. A crafted theme drives a write of up to roughly 256 KB past the end of the table. The overflowed buffer is allocated by GUIX itself, through `_gx_system_memory_allocator`, rather than supplied by the caller, so the loader corrupts its own arena. The public API `gx_binres_theme_load()` takes no size parameter, so no amount of caller diligence prevents this. Reproduces in the shipped default configuration; `GX_BINARY_RESOURCE_SUPPORT` is enabled by default.

GUIX binary resource loader reads past the end of a resource, because no length for it ever reaches the loader

`gx_binres_theme_load()` and `gx_binres_font_load()` take the resource as a bare `GX_UBYTE *` with no length, and `GX_BINRES_DATA_INFO` has no field to carry one. Every read is therefore performed at an offset the file itself chose, against a buffer whose extent the loader does not know. A resource that declares more data than it contains is read past its end, and an offset stored in the file is turned into a pointer without being bounded. This is a distinct defect from GHSA-hgcj-22cg-4hfv, which was an underflowed glyph count. It needs no underflow and no wrapped multiply: a perfectly well-formed, narrow glyph range reaches it.

GUIX binary resource loader: unvalidated glyph range causes an integer underflow and a heap out-of-bounds write when loading an untrusted font or theme

The GUIX binary resource loader never checks that a font page's glyph range is well formed. `gx_page_header_first_glyph` and `gx_page_header_last_glyph` are read verbatim from the file and only the upper bound of `last_glyph` is validated, so a page declaring `first_glyph > last_glyph` makes `last - first + 1` underflow to a very large unsigned count. That count is multiplied by a glyph record size to reserve the load buffer, and the multiply is unchecked, so it wraps to a small value and the loader allocates a buffer far smaller than the data it is about to write. The load pass then recomputes the count in a narrower type and writes attacker-controlled glyph records into the undersized buffer.

JPEG decoder: a duplicate SOF0 after SOS publishes a pixelmap that misreports its own allocation size

The GUIX JPEG software decoder enforces no ordering on JPEG markers. A file that places a second `SOF0` frame header after `SOS` re-runs the frame header parser after the output buffer has already been allocated and its geometry latched. The decoder returns `GX_SUCCESS` and publishes a `GX_PIXELMAP` whose reported dimensions and `data_size` exceed the allocation behind it. Any consumer that trusts the returned structure reads out of bounds, including GUIX's own display drivers, reached through the ordinary draw path. Reproduces in the shipped default configuration; `GX_SOFTWARE_DECODER_SUPPORT` is enabled by default.

JPEG decoder: truncated segments are read past the image buffer, and a zero sampling factor hangs the decode

The GUIX software JPEG decoder reads four kinds of marker segment without checking that each is long enough to hold what it reads. A truncated segment is therefore read past the end of the caller's image buffer. Separately, a zero chroma sampling factor makes the block decode loop non-terminating. Both reproduce in the default configuration, in which `GX_SOFTWARE_DECODER_SUPPORT` is enabled.

Out-of-bounds read when a multi-line text view string ends with a carriage return

`_gx_multi_line_text_view_display_info_get()` reads one byte past the end of the application's text buffer when the string it is given ends with a carriage return (`\r`). The over-read can also cause callers to advance their index past the end of the string, producing a second over-read in `_gx_multi_line_text_view_string_total_rows_compute()` and a row of text that is not in the source.

Pre-authentication OIDC discovery and JWKS fetches run synchronously on the asyncio event loop

Pre-authentication OIDC discovery and JWKS fetches run synchronously on the asyncio event loop, so one unauthenticated request stalls the whole service.

jwks_uri from the OIDC discovery document is fetched without checking its origin or scheme

PIA's token verification (`verify_token` in `pia/oidc.py`) fetches the OIDC discovery document of an allowlisted issuer and then follows the `jwks_uri` contained in that response without parsing it as a URL, comparing it against the approved issuer's origin, or requiring HTTPS — the only check is that the field is non-empty (`pia/oidc.py:42-52`). An approved identity provider — and every registered per-project Jenkins instance under `https://ci.eclipse.org/<project>/oidc` is a separate such party (`pia/models.py`) — can therefore direct PIA to issue a GET request to an arbitrary host and port, including over plaintext `http`, from PIA's own network position. The fetch happens before any signature is verified, as a side effect of an unauthenticated `POST /v1/upload/sbom` request that is ultimately rejected with 401.

Eclipse ioFog renders request templates before authentication

In Eclipse ioFog Controller versions 3.8.0 through 3.9.1, POST, PUT, and PATCH bodies on routes that enable template substitution are rendered by an uncapped Liquid engine before authentication and RBAC. The bearer check does not reject a missing or invalid token, and the auth rate limit applies only to user login routes. A small JSON body can stall or abort the Controller process. The anonymous caller does not receive the rendered result; the impact is availability of the control plane, including the agent API and in-process WebSocket relays on that process.

Eclipse ioFog operator WebSocket accepts an unverified JWT

In Eclipse ioFog Controller versions 3.8.0 through 3.9.1, operator WebSocket upgrades on the exec and log routes do not verify the bearer JWT. The payload is decoded and its groups or roles are used as RBAC subjects. A self-minted token whose groups contain admin matches the built-in admin role, with no account and no RoleBinding. The attacker can open an exec or log session for a microservice or fog whose UUID they already know. HTTP routes are not affected: they verify the token before RBAC. Agent WebSockets verify the fog token and are not affected.

FileX fault-tolerant log replay writes past the destination sector when mounting a crafted FAT image

Mounting an attacker-controlled FAT image with fault tolerance enabled causes an out-of-bounds heap write during log replay. The write is attacker-positioned and attacker-valued, and on a common embedded memory layout it reaches the FX_MEDIA driver callback, giving control of the instruction pointer.