Out‑of‑Bounds Write Leading to Kernel Corruption on Apple iOS, iPadOS, macOS, and tvOS

An out-of-bounds write issue was addressed with improved input validation. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, tvOS 27.2. An app may be able to cause unexpected system termination or corrupt kernel memory.

Out-of-Bounds Write in Zyxel GS1900 Series CGI Enables Remote Command Execution

An out-of-bounds write vulnerability in the CGI program of Zyxel GS1900-24E firmware versions through 2.90(AAHK.2)C0 could allow an unauthenticated adjacent attacker to exploit the flaw and potentially execute OS commands via a crafted HTTP request.

Out-of-bounds Write via NAND Metadata Parsing at Mount in LevelX

Mounting an attacker-controlled NAND flash image (`lx_nand_flash_open()`) triggers an unbounded out-of-bounds heap **write** in LevelX's NAND flash-translation-layer metadata parser that overwrites a driver function pointer in the control block, giving a demonstrated control-flow hijack — RIP set to a full 8-byte attacker-chosen value (register-verified). Two accompanying OOB reads. All reproduced verbatim under ASan at HEAD `9f1cfdc`.

Out of bounds write in Turbolev in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High)

A stack buffer overflow was addressed through improved input validation. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. Processing a maliciously crafted audit file may corrupt process memory.

chromium-browser: Out of bounds write in Editing

Use after free in Editing in Google Chrome prior to 156.0.8078.73 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High)

Out-of-bounds write in the TI CC1200 IEEE 802.15.4 driver from an unvalidated radio-supplied packet length

The CC1200 sub-GHz IEEE 802.15.4 driver takes the PHY packet length from the first byte of the radio's RX FIFO in get_packet_length() and validates it in verify_rxfifo_validity() (drivers/ieee802154/ieee802154_cc1200.c). That validation only enforced a lower bound (pkt_len < 3); its second clause rejects a FIFO that holds more bytes than declared and therefore never bounds large values. Because the driver configures the radio for variable packet length with PKT_LEN = 0xFF, the length byte is an over-the-air value of 0-255 that reached net_pkt_rx_alloc_with_buffer() and the subsequent SPI burst read unclamped. An unauthenticated attacker within radio range can transmit a frame that presents a length byte above the IEEE 802.15.4 maximum of 127 while the chip's 128-byte RX FIFO has not overflowed, so the driver's RX_FIFO_ERROR pre-check does not fire. Reaching this state depends on RF framing and timing, since the RX thread is driven off the PKT_SYNC_RXTX signal and may sample the FIFO before a packet is complete; no pairing, authentication, or user interaction is required. With the default CONFIG_NET_BUF_FIXED_DATA_SIZE and CONFIG_NET_BUF_DATA_SIZE=128, an allocation larger than one fragment is satisfied by a chain of fragments, but read_rxfifo_content() performs a single SPI burst of pkt_len bytes into the first fragment's buf->data and then calls net_buf_add() with the same length. A length above 128 therefore writes up to 127 bytes past the end of a fragment in the contiguous rx_bufs pool and leaves a net_buf whose len exceeds its capacity. The overflowing bytes are FIFO-underflow output rather than attacker-chosen data, so the practical impact is network-buffer-pool corruption and crashes rather than a controlled write. Only builds that enable CONFIG_IEEE802154_CC1200 with an attached CC1200 radio are affected.

Stack buffer overflow in Zephyr hl7800 modem driver parsing network-supplied +CGCONTRDP address fields

The HL7800 cellular modem driver's +CGCONTRDP: response handler on_cmd_atcmdinfo_ipaddr() in drivers/modem/vendor_standalone/hl7800.c parses the PDP-context dynamic parameters (local address, subnet mask, gateway, and DNS servers) that the cellular network assigns to the device. The response is linearized into a 256-byte stack buffer, after which each address field length is computed from comma/. delimiter positions in the network-supplied data and used directly as the length argument to strncpy() into the fixed 64-byte stack buffer temp_addr_str (and the 16-byte iface_ctx.dns_v4_string). Because the field length is derived from attacker-controlled delimiter positions and was not bounded against the destination buffer, a single field can be far larger than 64 bytes. A malicious or impersonated cellular network (for example a rogue base station) can return a crafted +CGCONTRDP response with an overlong address field, causing strncpy() to write past temp_addr_str on the modem worker thread's stack, plus an out-of-bounds NUL write at temp_addr_str[addr_len]. No device-side privileges or user interaction are required: the device itself issues the AT+CGCONTRDP=1 query during normal network attach and parses whatever the network returns. The overflow corrupts adjacent stack memory in supervisor context, yielding at minimum a remotely triggerable crash and potentially control-flow hijacking on targets without stack protection. The fix bounds every field length against its destination buffer (temp_addr_str and dns_v4_string) before each copy, rejecting overlong fields.

Out-of-bounds heap write in Zephyr `recvmsg()` ancillary-data path (`insert_pktinfo` undersizes the control-buffer capacity check)

Zephyr's IP socket recvmsg() implementation (subsys/net/lib/sockets/sockets_inet.c, insert_pktinfo()) validated the user-supplied ancillary (msg_control) buffer using only the payload length (msg->msg_controllen < pktinfo_len) before writing a full control message consisting of an aligned cmsg header plus the payload. Because the check omitted the cmsg header size, a control buffer whose length falls in the under-checked window (e.g. 16-27 bytes for IPv4 IP_PKTINFO on a 64-bit target, where a single element actually occupies 28 bytes) passes the guard yet causes a fixed-size out-of-bounds write of up to one cmsg header (~12 bytes) past the end of the buffer. Under CONFIG_USERSPACE the recvmsg verifier allocates a kernel-heap copy of the control buffer sized to msg_controllen and runs the implementation against it, so the overflow corrupts kernel heap memory and is triggerable from an unprivileged userspace thread; in supervisor mode it corrupts the caller's buffer. The path is reachable on a UDP/IP socket with IP_PKTINFO/IPV6_RECVPKTINFO (or hoplimit/timestamping) enabled when the application calls recvmsg() with an undersized control buffer and a datagram is received; part of the overwritten bytes (the destination IP in ipi_addr) is influenced by the received packet. The fix makes the capacity check use NET_CMSG_SPACE(pktinfo_len) (aligned header + aligned data) and returns -ENOMEM when the buffer is too small. Affected: v3.6.0 through v4.4.0.

upsmon: remote OS command injection (RCE) via attacker-controlled ups.alarm in NOTIFYCMD execution

Network UPS Tools is a collection of programs which provide a common interface for monitoring and administering UPS, PDU and SCD hardware. From 2.8.3 to 2.8.5, upsmon in clients/upsmon.c inserts the server-supplied ups.alarm value into shell commands executed by notify(), async_notify(), and wall(). When a monitored device reports an ALARM state and an operator has configured NOTIFYCMD with EXEC in NOTIFYFLAG ALARM, shell metacharacters in the alarm text are evaluated on POSIX or Windows and can execute arbitrary operating-system commands as the upsmon account, which is commonly root. An attacker can control the value through a malicious or compromised upsd, a man-in-the-middle on a plaintext upsd to upsmon connection, or a compromised UPS device whose driver supplies the alarm upstream of upsd; TLS between upsd and upsmon does not mitigate the compromised-device path. This vulnerability is fixed in 2.8.6.

ImageMagick before 7.1.2-34 Stack Overflow in TIFF Decoder

ImageMagick before 7.1.2-34 contains a stack overflow vulnerability in the TIFF decoder that occurs when the DNG decoder is disabled. Attackers can supply a crafted image file for processing to trigger the stack overflow and crash the application, causing denial of service.

Langflow OSS is affected by multiple vulnerabilities

IBM Langflow OSS 1.0.0 through 1.12.3 could allow a remote authenticated attacker to cause a denial of service due to improper neutralization of special elements used in an OS command.

nipy nibabel Header volumeutils.py array_from_file memory allocation

A security vulnerability has been detected in nipy nibabel up to 5.4.2. The affected element is the function array_from_file of the file nibabel/volumeutils.py of the component Header Handler. The manipulation leads to uncontrolled memory allocation. The attack is possible to be carried out remotely. The pull request to fix this issue awaits acceptance.

The c_rehash script allows command injection

In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.4 (Affected 3.0.0,3.0.1,3.0.2,3.0.3). Fixed in OpenSSL 1.1.1p (Affected 1.1.1-1.1.1o). Fixed in OpenSSL 1.0.2zf (Affected 1.0.2-1.0.2ze).

The c_rehash script allows command injection

The c_rehash script does not properly sanitise shell metacharacters to prevent command injection. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). Fixed in OpenSSL 1.1.1o (Affected 1.1.1-1.1.1n). Fixed in OpenSSL 1.0.2ze (Affected 1.0.2-1.0.2zd).

In neuropilot, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS11249062; Issue ID: MSV-9171.

IBM QRadar SIEM is vulnerable to remote code execution by privileged users

IBM QRadar 7.6.0.0 through 7.6.0.1, and 7.5.0 through 7.5.0 UP 15 Interim Fix 005 could allow an authenticated privileged user to execute arbitrary commands with normal user privileges on the system due to improper validation of user supplied input.

Junos OS Evolved: PTX Series: An attacker controlled DHCP response causes root-level compromise when zero-touch provisioning is used

An OS Command Injection vulnerability in the bootzd zero-touch provisioning daemon of Juniper Networks Junos OS Evolved allows an unauthenticated attacker on the management LAN to execute commands as root via crafted DHCP response.

D-Link DNS-320/DNS-320LW/DNS-325/DNS-340L account_mgr.cgi cgi_user_add os command injection

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been declared as critical. Affected by this vulnerability is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument name leads to os command injection. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.

Information disclosure in Brocade Fabric OS before 9.2.1c2, 9.2.2 through 9.2.2a and 10.0.0

A vulnerability in Brocade Fabric OS could allow an authenticated, local attacker with privileges to access the Bash shell to access insecurely stored file contents including the history command.