An issue was discovered in Contiki-NG tinyDTLS through 2018-08-30. One incorrect handshake could complete with different epoch numbers in the packets Client_Hello, Client_key_exchange, and Change_cipher_spec, which may cause denial of service.

btrfs: remove BUG() after failure to insert delayed dir index item

In the Linux kernel, the following vulnerability has been resolved: btrfs: remove BUG() after failure to insert delayed dir index item Instead of calling BUG() when we fail to insert a delayed dir index item into the delayed node's tree, we can just release all the resources we have allocated/acquired before and return the error to the caller. This is fine because all existing call chains undo anything they have done before calling btrfs_insert_delayed_dir_index() or BUG_ON (when creating pending snapshots in the transaction commit path). So remove the BUG() call and do proper error handling. This relates to a syzbot report linked below, but does not fix it because it only prevents hitting a BUG(), it does not fix the issue where somehow we attempt to use twice the same index number for different index items.

Junos OS: MX Series: Gathering statistics in a scaled SCU/DCU configuration will lead to a device crash

An Improper Check for Unusual or Exceptional Conditions vulnerability in the kernel of Juniper Network Junos OS on MX Series allows a network based attacker with low privileges to cause a denial of service. If a scaled configuration for Source class usage (SCU) / destination class usage (DCU) (more than 10 route classes) is present and the SCU/DCU statistics are gathered by executing specific SNMP requests or CLI commands, a 'vmcore' for the RE kernel will be seen which leads to a device restart. Continued exploitation of this issue will lead to a sustained DoS. This issue only affects MX Series devices with MPC10, MPC11 or LC9600, and MX304. No other MX Series devices are affected. This issue affects Juniper Networks Junos OS: * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S6; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3; * 22.1 versions earlier than 22.1R3; * 22.2 versions earlier than 22.2R2; * 22.3 versions earlier than 22.3R2.

Junos OS: jdhcpd will hang on receiving a specific DHCP packet

An Improper Check for Unusual or Exceptional Conditions vulnerability in Juniper DHCP Daemon (jdhcpd) of Juniper Networks Junos OS allows an adjacent, unauthenticated attacker to cause the jdhcpd to consume all the CPU cycles resulting in a Denial of Service (DoS). On Junos OS devices with forward-snooped-client configured, if an attacker sends a specific DHCP packet to a non-configured interface, this will cause an infinite loop. The DHCP process will have to be restarted to recover the service. This issue affects: Juniper Networks Junos OS * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S5; * 22.1 versions earlier than 22.1R3-S4; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S2; * 22.4 versions earlier than 22.4R2-S2, 22.4R3; * 23.2 versions earlier than 23.2R2.

sys/netinet/tcp_timer.h in FreeBSD before 7.0 contains a denial-of-service (DoS) vulnerability due to improper handling of TSopt on TCP connections. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

raw_call `value=` kwargs not disabled for static and delegate calls

Vyper is a pythonic Smart Contract Language for the ethereum virtual machine. Vyper compiler allows passing a value in builtin raw_call even if the call is a delegatecall or a staticcall. But in the context of delegatecall and staticcall the handling of value is not possible due to the semantics of the respective opcodes, and vyper will silently ignore the value= argument. If the semantics of the EVM are unknown to the developer, he could suspect that by specifying the `value` kwarg, exactly the given amount will be sent along to the target. This vulnerability affects 0.3.10 and earlier versions.

An issue discovered in skycaiji 2.8 allows attackers to run arbitrary code via crafted POST request to /index.php?s=/admin/develop/editor_save.

An issue was discovered in Contiki-NG tinyDTLS through master branch 53a0d97. DTLS servers mishandle the early use of a large epoch number. This vulnerability allows remote attackers to cause a denial of service and false-positive packet drops.

Mocodo Mocodo Online 4.2.6 and below is vulnerable to Remote Code Execution via /web/rewrite.php.

vmir e8117 was discovered to contain a segmentation violation via the wasm_parse_block function at /src/vmir_wasm_parser.c.

vmir e8117 was discovered to contain a segmentation violation via the import_function function at /src/vmir_wasm_parser.c.

vmir e8117 was discovered to contain a segmentation violation via the export_function function at /src/vmir_wasm_parser.c.

Philips Clinical Collaboration Platform Algorithm Downgrade

Philips Clinical Collaboration Platform, Versions 12.2.1 and prior, does not properly control the allocation and maintenance of a limited resource, thereby enabling an attacker to influence the amount of resources consumed, eventually leading to the exhaustion of available resources.

Dex 2.37.0 is discarding TLSconfig and always serves deprecated TLS 1.0/1.1 and insecure ciphers

Dex is an identity service that uses OpenID Connect to drive authentication for other apps. Dex 2.37.0 serves HTTPS with insecure TLS 1.0 and TLS 1.1. `cmd/dex/serve.go` line 425 seemingly sets TLS 1.2 as minimum version, but the whole `tlsConfig` is ignored after `TLS cert reloader` was introduced in v2.37.0. Configured cipher suites are not respected either. This issue is fixed in Dex 2.38.0.

Junos OS: MX Series: Memory leak in bbe-smgd process if BFD liveness detection for DHCP subscribers is enabled

An Improper Handling of Exceptional Conditions vulnerability in the broadband edge subscriber management daemon (bbe-smgd) of Juniper Networks Junos OS on MX Series allows an attacker directly connected to the vulnerable system who repeatedly flaps DHCP subscriber sessions to cause a slow memory leak, ultimately leading to a Denial of Service (DoS). Memory can only be recovered by manually restarting bbe-smgd. This issue only occurs if BFD liveness detection for DHCP subscribers is enabled. Systems without BFD liveness detection enabled are not vulnerable to this issue. Indication of the issue can be observed by periodically executing the 'show system processes extensive' command, which will indicate an increase in memory allocation for bbe-smgd. A small amount of memory is leaked every time a DHCP subscriber logs in, which will become visible over time, ultimately leading to memory starvation. user@junos> show system processes extensive | match bbe-smgd 13071 root 24 0 415M 201M select 0 0:41 7.28% bbe-smgd{bbe-smgd} 13071 root 20 0 415M 201M select 1 0:04 0.00% bbe-smgd{bbe-smgd} ... user@junos> show system processes extensive | match bbe-smgd 13071 root 20 0 420M 208M select 0 4:33 0.10% bbe-smgd{bbe-smgd} 13071 root 20 0 420M 208M select 0 0:12 0.00% bbe-smgd{bbe-smgd} ... This issue affects Juniper Networks Junos OS on MX Series: * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S5; * 22.1 versions earlier than 22.1R3-S4; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S2; * 22.4 versions earlier than 22.4R2-S2, 22.4R3; * 23.2 versions earlier than 23.2R1-S1, 23.2R2.

jfreechart: Null pointer exception

JFreeChart v1.5.4 was discovered to contain a NullPointerException via the component /labels/BubbleXYItemLabelGenerator.java. NOTE: this is disputed by multiple third parties who believe there was not reasonable evidence to determine the existence of a vulnerability. The submission may have been based on a tool that is not sufficiently robust for vulnerability identification.

An uncaught exception issue discovered in Softing OPC UA C++ SDK before 6.30 for Windows operating system may cause the application to crash when the server wants to send an error packet, while socket is blocked on writing.

Denial of Service Vulnerability in Some ZTE Mobile Internet Products

There is a denial of service vulnerability in some ZTE mobile internet products. Due to insufficient validation of Web interface parameter, an attacker could use the vulnerability to perform a denial of service attack.

Junos OS: If in a scaled CoS scenario information on CoS state is gathered mgd processes get stuck

An Improper Handling of Exceptional Conditions vulnerability in the Class of Service daemon (cosd) of Juniper Networks Junos OS allows an authenticated, network-based attacker with low privileges to cause a limited Denial of Service (DoS). In a scaled CoS scenario with 1000s of interfaces, when specific low privileged commands, received over NETCONF, SSH or telnet, are handled by cosd on behalf of mgd, the respective child management daemon (mgd) processes will get stuck. In case of (Netconf over) SSH this leads to stuck SSH sessions, so that when the connection-limit for SSH is reached, new sessions can't be established anymore. A similar behavior will be seen for telnet etc. Stuck mgd processes can be monitored by executing the following command:   user@host> show system processes extensive | match mgd | match sbwait This issue affects Juniper Networks Junos OS: * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S5; * 22.1 versions earlier than 22.1R3-S4; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S2; * 22.4 versions earlier than 22.4R3; * 23.2 versions earlier than 23.2R1-S2, 23.2R2.

Uncaptured exceptions in the home screen module. Successful exploitation of this vulnerability may affect stability.