domctl lock open to abuse

[This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] To create and manage guests, domctl operations are used by the control domain, a possible Xenstore domain, or by a domain controlling a particular guest. Some of these operations may not be executed in parallel, so a system-wide lock is used. The way that lock is acquired is, however, not providing any fairness. This is CVE-2026-42489. Furthermore, with XSM/Flask in use, the lock acquire will, for some operations, occur ahead of any permission checking. This is CVE-2026-42490.

kernel: usb: gadget: f_ncm: Fix atomic context locking issue

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

External Secrets Operator: Namespace Isolation Bypass in CAProvider ConfigMap Resolution for SecretStore

External Secrets Operator reads information from a third-party service and automatically injects the values as Kubernetes Secrets. Prior to 2.4.0, Namespaced SecretStore resources that used CAProvider with type ConfigMap could resolve CA material from another namespace when caProvider.namespace was set. This bypassed the namespace boundary enforced for SecretStore-backed references in providers that rely on the shared runtime CA resolver. This vulnerability is fixed in 2.4.0.

block: Prevent potential deadlocks in zone write plug error recovery

In the Linux kernel, the following vulnerability has been resolved: block: Prevent potential deadlocks in zone write plug error recovery Zone write plugging for handling writes to zones of a zoned block device always execute a zone report whenever a write BIO to a zone fails. The intent of this is to ensure that the tracking of a zone write pointer is always correct to ensure that the alignment to a zone write pointer of write BIOs can be checked on submission and that we can always correctly emulate zone append operations using regular write BIOs. However, this error recovery scheme introduces a potential deadlock if a device queue freeze is initiated while BIOs are still plugged in a zone write plug and one of these write operation fails. In such case, the disk zone write plug error recovery work is scheduled and executes a report zone. This in turn can result in a request allocation in the underlying driver to issue the report zones command to the device. But with the device queue freeze already started, this allocation will block, preventing the report zone execution and the continuation of the processing of the plugged BIOs. As plugged BIOs hold a queue usage reference, the queue freeze itself will never complete, resulting in a deadlock. Avoid this problem by completely removing from the zone write plugging code the use of report zones operations after a failed write operation, instead relying on the device user to either execute a report zones, reset the zone, finish the zone, or give up writing to the device (which is a fairly common pattern for file systems which degrade to read-only after write failures). This is not an unreasonnable requirement as all well-behaved applications, FSes and device mapper already use report zones to recover from write errors whenever possible by comparing the current position of a zone write pointer with what their assumption about the position is. The changes to remove the automatic error recovery are as follows: - Completely remove the error recovery work and its associated resources (zone write plug list head, disk error list, and disk zone_wplugs_work work struct). This also removes the functions disk_zone_wplug_set_error() and disk_zone_wplug_clear_error(). - Change the BLK_ZONE_WPLUG_ERROR zone write plug flag into BLK_ZONE_WPLUG_NEED_WP_UPDATE. This new flag is set for a zone write plug whenever a write opration targetting the zone of the zone write plug fails. This flag indicates that the zone write pointer offset is not reliable and that it must be updated when the next report zone, reset zone, finish zone or disk revalidation is executed. - Modify blk_zone_write_plug_bio_endio() to set the BLK_ZONE_WPLUG_NEED_WP_UPDATE flag for the target zone of a failed write BIO. - Modify the function disk_zone_wplug_set_wp_offset() to clear this new flag, thus implementing recovery of a correct write pointer offset with the reset (all) zone and finish zone operations. - Modify blkdev_report_zones() to always use the disk_report_zones_cb() callback so that disk_zone_wplug_sync_wp_offset() can be called for any zone marked with the BLK_ZONE_WPLUG_NEED_WP_UPDATE flag. This implements recovery of a correct write pointer offset for zone write plugs marked with BLK_ZONE_WPLUG_NEED_WP_UPDATE and within the range of the report zones operation executed by the user. - Modify blk_revalidate_seq_zone() to call disk_zone_wplug_sync_wp_offset() for all sequential write required zones when a zoned block device is revalidated, thus always resolving any inconsistency between the write pointer offset of zone write plugs and the actual write pointer position of sequential zones.

usb: dwc3: fix fault at system suspend if device was already runtime suspended

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: fix fault at system suspend if device was already runtime suspended If the device was already runtime suspended then during system suspend we cannot access the device registers else it will crash. Also we cannot access any registers after dwc3_core_exit() on some platforms so move the dwc3_enable_susphy() call to the top.

An issue was discovered in TigerGraph Enterprise Free Edition 3.x. Data loading jobs in gsql_server, created by any user with designer permissions, can read sensitive data from arbitrary locations.

Metabase vulnerable to circumvention of Locked parameter in Signed Embedding

Metabase is data visualization software. Prior to versions 0.44.5, 1.44.5, 0.43.7, 1.43.7, 0.42.6, and 1.42.6, it was possible to circumvent locked parameters when requesting data for a question in an embedded dashboard by constructing a malicious request to the backend. This issue is patched in versions 0.44.5, 1.44.5, 0.43.7, 1.43.7, 0.42.6, and 1.42.6.

Renderers can obtain access to random bluetooth device without permission in Electron

Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. A vulnerability in versions prior to `17.0.0-alpha.6`, `16.0.6`, `15.3.5`, `14.2.4`, and `13.6.6` allows renderers to obtain access to a bluetooth device via the web bluetooth API if the app has not configured a custom `select-bluetooth-device` event handler. This has been patched and Electron versions `17.0.0-alpha.6`, `16.0.6`, `15.3.5`, `14.2.4`, and `13.6.6` contain the fix. Code from the GitHub Security Advisory can be added to the app to work around the issue.

ubifs: Fix deadlock in concurrent rename whiteout and inode writeback

In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix deadlock in concurrent rename whiteout and inode writeback Following hung tasks: [ 77.028764] task:kworker/u8:4 state:D stack: 0 pid: 132 [ 77.028820] Call Trace: [ 77.029027] schedule+0x8c/0x1b0 [ 77.029067] mutex_lock+0x50/0x60 [ 77.029074] ubifs_write_inode+0x68/0x1f0 [ubifs] [ 77.029117] __writeback_single_inode+0x43c/0x570 [ 77.029128] writeback_sb_inodes+0x259/0x740 [ 77.029148] wb_writeback+0x107/0x4d0 [ 77.029163] wb_workfn+0x162/0x7b0 [ 92.390442] task:aa state:D stack: 0 pid: 1506 [ 92.390448] Call Trace: [ 92.390458] schedule+0x8c/0x1b0 [ 92.390461] wb_wait_for_completion+0x82/0xd0 [ 92.390469] __writeback_inodes_sb_nr+0xb2/0x110 [ 92.390472] writeback_inodes_sb_nr+0x14/0x20 [ 92.390476] ubifs_budget_space+0x705/0xdd0 [ubifs] [ 92.390503] do_rename.cold+0x7f/0x187 [ubifs] [ 92.390549] ubifs_rename+0x8b/0x180 [ubifs] [ 92.390571] vfs_rename+0xdb2/0x1170 [ 92.390580] do_renameat2+0x554/0x770 , are caused by concurrent rename whiteout and inode writeback processes: rename_whiteout(Thread 1) wb_workfn(Thread2) ubifs_rename do_rename lock_4_inodes (Hold ui_mutex) ubifs_budget_space make_free_space shrink_liability __writeback_inodes_sb_nr bdi_split_work_to_wbs (Queue new wb work) wb_do_writeback(wb work) __writeback_single_inode ubifs_write_inode LOCK(ui_mutex) ↑ wb_wait_for_completion (Wait wb work) <-- deadlock! Reproducer (Detail program in [Link]): 1. SYS_renameat2("/mp/dir/file", "/mp/dir/whiteout", RENAME_WHITEOUT) 2. Consume out of space before kernel(mdelay) doing budget for whiteout Fix it by doing whiteout space budget before locking ubifs inodes. BTW, it also fixes wrong goto tag 'out_release' in whiteout budget error handling path(It should at least recover dir i_size and unlock 4 ubifs inodes).

Improper initialization for some Intel(R) PROSet/Wireless WiFi and Killer(TM) WiFi products may allow a privileged user to potentially enable escalation of privilege via local access.

Data-transfer-project information disclosure via tmp directory

On unix-like systems, the system temporary directory is shared between all users on that system. The root cause is File.createTempFile creates files in the the system temporary directory with world readable permissions. Any sensitive information written to theses files is visible to all other local users on unix-like systems. We recommend upgrading past commit https://github.com/google/data-transfer-project/pull/969

Klapp App Authorization Credentials information disclosure

A vulnerability has been found in Klapp App and classified as problematic. This vulnerability affects unknown code of the component Authorization. The manipulation leads to information disclosure (Credentials). The attack can be initiated remotely. It is recommended to upgrade the affected app.

net: ks8851: Reinstate disabling of BHs around IRQ handler

In the Linux kernel, the following vulnerability has been resolved: net: ks8851: Reinstate disabling of BHs around IRQ handler If the driver executes ks8851_irq() AND a TX packet has been sent, then the driver enables TX queue via netif_wake_queue() which schedules TX softirq to queue packets for this device. If CONFIG_PREEMPT_RT=y is set AND a packet has also been received by the MAC, then ks8851_rx_pkts() calls netdev_alloc_skb_ip_align() to allocate SKBs for the received packets. If netdev_alloc_skb_ip_align() is called with BH enabled, then local_bh_enable() at the end of netdev_alloc_skb_ip_align() will trigger the pending softirq processing, which may ultimately call the .xmit callback ks8851_start_xmit_par(). The ks8851_start_xmit_par() will try to lock struct ks8851_net_par .lock spinlock, which is already locked by ks8851_irq() from which ks8851_start_xmit_par() was called. This leads to a deadlock, which is reported by the kernel, including a trace listed below. If CONFIG_PREEMPT_RT is not set, then since commit 0913ec336a6c0 ("net: ks8851: Fix deadlock with the SPI chip variant") the deadlock can also be triggered without received packet in the RX FIFO. The pending softirqs will be processed on return from spin_unlock_bh(&ks->statelock) in ks8851_irq(), which triggers the deadlock as well. Fix the problem by disabling BH around critical sections, including the IRQ handler, thus preventing the net_tx_action() softirq from triggering during these critical sections. The net_tx_action() softirq is triggered once BH are re-enabled and at the end of the IRQ handler, once all the other IRQ handler actions have been completed. __schedule from schedule_rtlock+0x1c/0x34 schedule_rtlock from rtlock_slowlock_locked+0x548/0x904 rtlock_slowlock_locked from rt_spin_lock+0x60/0x9c rt_spin_lock from ks8851_start_xmit_par+0x74/0x1a8 ks8851_start_xmit_par from netdev_start_xmit+0x20/0x44 netdev_start_xmit from dev_hard_start_xmit+0xd0/0x188 dev_hard_start_xmit from sch_direct_xmit+0xb8/0x25c sch_direct_xmit from __qdisc_run+0x1f8/0x4ec __qdisc_run from qdisc_run+0x1c/0x28 qdisc_run from net_tx_action+0x1f0/0x268 net_tx_action from handle_softirqs+0x1a4/0x270 handle_softirqs from __local_bh_enable_ip+0xcc/0xe0 __local_bh_enable_ip from __alloc_skb+0xd8/0x128 __alloc_skb from __netdev_alloc_skb+0x3c/0x19c __netdev_alloc_skb from ks8851_irq+0x388/0x4d4 ks8851_irq from irq_thread_fn+0x24/0x64 irq_thread_fn from irq_thread+0x178/0x28c irq_thread from kthread+0x12c/0x138 kthread from ret_from_fork+0x14/0x28

jbd2: fix deadlock in jbd2_journal_cancel_revoke()

In the Linux kernel, the following vulnerability has been resolved: jbd2: fix deadlock in jbd2_journal_cancel_revoke() Commit f76d4c28a46a ("fs/jbd2: use sleeping version of __find_get_block()") changed jbd2_journal_cancel_revoke() to use __find_get_block_nonatomic() which holds the folio lock instead of i_private_lock. This breaks the lock ordering (folio -> buffer) and causes an ABBA deadlock when the filesystem blocksize < pagesize: T1 T2 ext4_mkdir() ext4_init_new_dir() ext4_append() ext4_getblk() lock_buffer() <- A sync_blockdev() blkdev_writepages() writeback_iter() writeback_get_folio() folio_lock() <- B ext4_journal_get_create_access() jbd2_journal_cancel_revoke() __find_get_block_nonatomic() folio_lock() <- B block_write_full_folio() lock_buffer() <- A This can occasionally cause generic/013 to hang. Fix by only calling __find_get_block_nonatomic() when the passed buffer_head doesn't belong to the bdev, which is the only case that we need to look up its bdev alias. Otherwise, the lookup is redundant since the found buffer_head is equal to the one we passed in.

Boot Script Injection via iPXE Script in OpenStack Ironic Node Configuration

OpenStack Ironic before 35.0.2 allows Boot Script Injection of an iPXE script if the attacker can set node.driver_info or node.instance_info.

Avira Password Manager credential disclosure via cross-origin autofill in Firefox

Information disclosure vulnerability in Avira Password Manager when used with Mozilla Firefox may allow a remote attacker operating a cross-origin iframe to obtain credentials autofilled for the parent web page via incorrect autofill field selection. This issue affects Avira Password Manager when used with Mozilla Firefox on Windows, macOS, and Linux.

OpenClaw < 2026.4.26 - Information Disclosure via Sandboxed Session Spawn

OpenClaw before 2026.4.26 contains an information disclosure vulnerability in sandboxed session spawning that exposes the real workspace path to child prompts. Attackers can exploit this by spawning child sessions from sandboxed parents to reveal host workspace location or related memory context to child models.

vm2: NodeVM observability builtins leak host process and HTTP request data

vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.4, NodeVM exposes some process-wide observability builtins when they are allowed through require.builtin. The diagnostics_channel, async_hooks, and perf_hooks builtins are not blocked by the dangerous builtin denylist. These modules are process-wide, not sandbox-local. Sandboxed code can use them to observe host application data across the vm2 boundary. This issue has been patched in version 3.11.4.

OpenFGA: Cache-key delimiter injection in openfga/openfga shared-iterator and v2 iterator caches enables intra-store authorization-decision poisoning

OpenFGA is an authorization/permission engine built for developers. Prior to version 1.16.0, when iterator caching is enabled, two distinct check requests can produce the same cache key, leading to OpenFGA reusing an earlier cached result for a subsequent request. This issue has been patched in version 1.16.0.

cgroup: Defer css percpu_ref kill on rmdir until cgroup is depopulated

In the Linux kernel, the following vulnerability has been resolved: cgroup: Defer css percpu_ref kill on rmdir until cgroup is depopulated A chain of commits going back to v7.0 reworked rmdir to satisfy the controller invariant that a subsystem's ->css_offline() must not run while tasks are still doing kernel-side work in the cgroup. [1] d245698d727a ("cgroup: Defer task cgroup unlink until after the task is done switching out") [2] a72f73c4dd9b ("cgroup: Don't expose dead tasks in cgroup") [3] 1b164b876c36 ("cgroup: Wait for dying tasks to leave on rmdir") [4] 4c56a8ac6869 ("cgroup: Fix cgroup_drain_dying() testing the wrong condition") [5] 13e786b64bd3 ("cgroup: Increment nr_dying_subsys_* from rmdir context") [1] moved task cset unlink from do_exit() to finish_task_switch() so a task's cset link drops only after the task has fully stopped scheduling. That made tasks past exit_signals() linger on cset->tasks until their final context switch, which led to a series of problems as what userspace expected to see after rmdir diverged from what the kernel needs to wait for. [2]-[5] tried to bridge that divergence: [2] filtered the exiting tasks from cgroup.procs; [3] had rmdir(2) sleep in TASK_UNINTERRUPTIBLE for them; [4] fixed the wait's condition; [5] made nr_dying_subsys_* visible synchronously. The cgroup_drain_dying() wait in [3] turned out to be a dead end. When the rmdir caller is also the reaper of a zombie that pins a pidns teardown (e.g. host PID 1 systemd reaping orphan pids that were re-parented to it during the same teardown), rmdir blocks in TASK_UNINTERRUPTIBLE waiting for those pids to free, the pids can't free because PID 1 is the reaper and it's stuck in rmdir, and the system A-A deadlocks. No internal lock ordering breaks this; the wait itself is the bug. The css killing side that drove the original reorder, however, can be made cleanly asynchronous: ->css_offline() is already async, run from css_killed_work_fn() driven by percpu_ref_kill_and_confirm(). The fix is to make that chain start only after all tasks have left the cgroup. rmdir's user-visible side then returns as soon as cgroup.procs and friends are empty, while ->css_offline() still runs only after the cgroup is fully drained. Verified by the original reproducer (pidns teardown + zombie reaper, runs under vng) which hangs vanilla and succeeds here, and by per-commit deterministic repros for [2], [3], [4], [5] with a boot parameter that widens the post-exit_signals() window so each state is reliably reachable. Some stress tests on top of that. cgroup_apply_control_disable() has the same shape of pre-existing race: when a controller is disabled via subtree_control, kill_css() ran synchronously while tasks past exit_signals() could still be linked to the cgroup's csets, and ->css_offline() could fire before they drained. This patch preserves the existing synchronous behavior at that call site (kill_css_sync() + kill_css_finish() back-to-back) and a follow-up patch will defer kill_css_finish() there using a per-css trigger. This seems like the right approach and I don't see problems with it. The changes are somewhat invasive but not excessively so, so backporting to -stable should be okay. If something does turn out to be wrong, the fallback is to revert the entire chain ([1]-[5]) and rework in the development branch instead. v2: Pin cgrp across the deferred destroy work with explicit cgroup_get()/cgroup_put() around queue_work() and the work_fn. v1 wasn't actually broken (ordered cgroup_offline_wq + queue_work order in cgroup_task_dead() saved it) but the explicit ref removes the dependency on those non-obvious invariants. Also note the pre-existing cgroup_apply_control_disable() race in the description; a follow-up will defer kill_css_finish() there.