X-AnyLabeling before 4.0.0-beta.9 Improper Certificate Validation in Model Downloads

X-AnyLabeling's model downloader disabled TLS certificate verification. download_with_retry in anylabeling/services/auto_labeling/model.py built a context with ssl._create_unverified_context() and passed it to urllib.request.urlopen, so neither the certificate chain nor the hostname was checked on any model download, and models are fetched over HTTPS from the project's release host. Any party positioned to intercept that connection could therefore answer it with content of their own choosing. The response is written to a .part file and moved into place with os.replace, and the only post-download check, safe_check_model, validates the file's format rather than its provenance: no hash or signature is compared against an expected value. For an ONNX target the substituted file passes onnx.checker.check_model and is then used for inference, so the attacker chooses the model that produces the application's annotations. For a .pth or .pt target, which the shipped SAM2 video, YOLOE, UPN and open_vision configurations use, the check worker calls torch.load without weights_only, so a substituted file is unpickled and executes code of the attacker's choosing on PyTorch releases predating the weights_only default.

Improper Certificate Validation Allows Remote Bypass in Dell PowerProtect One

Dell PowerProtect One, versions 20.1.0.0 and below, contain an Improper Certificate Validation vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Protection mechanism bypass.

TarsWeb through 3.0.14 Authentication Bypass via Spoofed X-Forwarded-For and uid Parameter

TarsWeb decides whether a request comes from a trusted local caller using a client-controlled header. app.js sets Koa's proxy option to true without naming which upstream proxies may be trusted and without limiting the number of forwarded hops, so the request address Koa reports is taken from the X-Forwarded-For header supplied by the caller. In midware/ssoMidware.js a single branch covers both the ignored-path list and the ignoreIps allowlist from config/loginConf.js, which contains the loopback address, and that branch assigns the effective account identity from the uid query parameter before falling through to the request without validating any ticket, cookie or password. A request carrying a forged X-Forwarded-For value naming the loopback address and a uid naming an existing account therefore reaches every route the console mounts as that account, including an administrator, with no credential of any kind. Those routes include user and role administration, service configuration, and package upload and deployment. Version 3.0.16 separates the two branches so that a match on the address allowlist assigns the configured default account rather than one named by the caller.

Denial of Service via Replayed Payloads on Acre Security Main Board

An issue in Vanderbilt Industries, Acre Security SPC5300.000 Main Board v.3.14.1 allows a physically proximate attacker to cause a denial of service via the SPC Connect Pro software accepts replayed application-layer payloads injected into an active TCP session.

Denial of Service via Spoofed TCP FIN Packets on Acre Security SPC5300 Main Board

An issue in Vanderbilt Industries, Acre Security SPC5300.000 Main Board v.3.14.1 allows a physically proximate attacker to cause a denial of service via spoofed TCP FIN packets without validating the sequence or acknowledgment numbers.

JSSE hostname verifier CN-fallback enabled by default despite documented opt-in

In Bouncy Castle for Java before 1.85, JSSE hostname verifier CN-fallback enabled by default despite documented opt-in. This issue also affects Bouncy Castle for Java LTS before 2.73.12, and Bouncy Castle for Java FIPS (BC-FJA) before bctls-fips 1.0.24 (1.0.X series), 2.0.24 (2.0.X series) and 2.1.24 (2.1.X series).

WordPress Essential Addons for Elementor plugin <= 6.8.0 - Bypass vulnerability vulnerability

Authentication Bypass by Spoofing vulnerability in WPDeveloper Essential Addons for Elementor allows Identity Spoofing. This issue affects Essential Addons for Elementor: from n/a through 6.8.0.

Improper Certificate Validation in ASE 2000

ASE2000 2.35 through 2.37 is vulnerable to an improper certificate validation vulnerability, which may allow an attacker to impersonate the trusted peer, complete the TLS handshake, and read or modify protected communications.

Revoked Root Certificates Enable Man‑in‑The‑Middle Data Capture on SEIKO EPSON Devices

Multiple SEIKO EPSON printers and scanners contain revoked root certificates. A man-in-the-middle attack may allow an attacker to obtain communication data transmitted by the product. As for the details of the affected products and versions, refer to the vendor's information.

MQTT Certificate Validation Failure Exposes Logs

DEEBOT PRO M1 and DEEBOT PRO K1VAC do not validate server certificates in MQTT communications. Operation logs and activity logs stored on the affected products may be retrieved.

chromium-browser: chromium-browser: Missing authorization in Core

Missing authorization in Core in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to potentially spoof address bar via a crafted HTML page. (Chromium security severity: Low)

Authentication Bypass through IP Address Spoofing in the Automation Broker in Splunk SOAR

In Splunk SOAR versions below 8.6.0, an unauthenticated user could spoof the source IP address in a crafted request to an Automation Broker notification endpoint and execute arbitrary code on the Splunk SOAR host. The vulnerability is possible because the Splunk SOAR Automation Broker trusts a client-supplied source IP address header as proof that the request originates from the local system. Successful exploitation can expose all relevant data, affect system integrity, and disrupt service availability. For more information see About Splunk SOAR Automation Broker (https://help.splunk.com/en/splunk-soar/splunk-automation-broker/about-splunk-soar-automation-broker/about-splunk-soar-automation-broker) in the Splunk documentation.

Nimiq: Validity store off by one error

Nimiq is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. Through 1.5.0, the validity store uses a strict lower-bound comparison that expires a stored transaction too early relative to Transaction::is_valid_at, allowing a remote attacker to replay the same signed transaction during a blocks_per_batch minus one block window and cause the sender and recipient balances to be updated twice. This issue is fixed in version 1.5.1.

Apache Tomcat: Limited replay attack possible with DIGEST authentication

Authentication Bypass by Capture-replay vulnerability in Apache Tomcat's DIGEST authenticator. If, before windowSize requests have been made, a client makes a DIGEST authenticated request with a nonceCount on the upper boundary of the replay window then that request is replayable once only while the associated nonceCount remains within the replay window.   This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.30 through 7.0.109. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue.

Maas-billing: maas api: privilege escalation via forged http headers due to missing authentication

A flaw was found in the MaaS API. This vulnerability allows any pod within the cluster to bypass the Kuadrant AuthPolicy gateway by forging HTTP headers, specifically `X-MaaS-Username` and `X-MaaS-Group`, which are trusted verbatim. This lack of first-party authentication enables an attacker to gain unauthorized access and escalate privileges. The concrete consequences include the ability to mint Kubernetes ServiceAccount tokens in other tenants' namespaces, revoke API keys, and exfiltrate sensitive model access configuration.

Netmaker through 1.6.0 Improper Certificate Validation in SMTP Client

Netmaker disables certificate verification on the connection to the configured mail server. The sender in pro/email/smtp.go assigns a TLS configuration whose skip-verify field is set to true unconditionally, directly beneath a comment stating that the setting should be false in production. No configuration value governs it and no code path restores verification, so the client accepts any certificate the mail server presents, including one an interposing party supplies. Mail that Netmaker sends over that connection includes password-reset messages carrying single-use tokens and user invitations carrying enrolment links, so a party positioned on the path between the server and its mail relay can read those messages in transit and use a captured reset token before the intended recipient does. The setting is absent from the development branch but present in the latest release.

kas: Persistent SSH Host Key Checking Disablement

kas is a setup tool for bitbake based projects. Prior to 5.4, internal SSH key setup triggered by SSH_PRIVATE_KEY or SSH_PRIVATE_KEY_FILE creates ~/.ssh/config when no user-specific SSH configuration exists and adds a global Host * rule containing StrictHostKeyChecking no. In kas/libcmds.py, ssh_no_host_key_check() runs without checking ctx.managed_env, so the setting persists after kas exits and affects future SSH sessions by the same local user, extending beyond the intended short-lived continuous integration environment. A later SSH connection can therefore accept an attacker-controlled host key without verification, increasing the risk of a man-in-the-middle attack that compromises session confidentiality or integrity. This issue is fixed in version 5.4.

Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7 (patched in 13.6.12 (LTS) and 13.9.0 (STS)), allow a physically proximate attacker to escalate privileges by booting from a USB device with a valid root filesystem. This occurs because of insecure default settings in the Legacy GRUB Bootloader.

The issue was addressed with improved checks. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.5. A maliciously crafted ZIP archive may bypass Gatekeeper checks.

A file quarantine bypass was addressed with additional checks. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.5. A maliciously crafted ZIP archive may bypass Gatekeeper checks.