Roundcube Webmail Password Plugin Modoboa Driver Token Leakage

In Roundcube Webmail before 1.6.18 and 1.7.x before 1.7.3, the modoboa driver of the password plugin could leak a Modoboa API authentication token to a user-controlled host via crafted session data. This issue only affects Roundcube instances using the password plugin with its modoboa driver.

rxrpc: Fix the reception of a reply packet before data transmission

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix the reception of a reply packet before data transmission Fix rxrpc_receiving_reply() to handle the reception of an apparent reply DATA packet before rxrpc has had a chance to send any request DATA packets on a client call by checking to see if the call has been exposed yet by sending the first packet. Without this, rxrpc_rotate_tx_window() might oops. Also fix rxrpc_rotate_tx_window() to handle the Tx queue being empty by changing the do...while loop into a while loop, just in case a call is abnormally terminated by an early reply before the last request packet is transmitted.

dmaengine: dma-axi-dmac: use DMA pool to manange DMA descriptor

In the Linux kernel, the following vulnerability has been resolved: dmaengine: dma-axi-dmac: use DMA pool to manange DMA descriptor For architectures like Microblaze or arm64 (where this IP is used), DMA_DIRECT_REMAP is set which means that dma_alloc_coherent() might remap (and hence vmalloc()) some memory. This became visible in a design where dma_direct_use_pool() is not possible. With the above, when calling dma_free_coherent(), vunmap() would be called from softirq context and thus leading to a BUG(). To fix it, use a dma pool that is allocated in .device_alloc_chan_resources() and allocate blocks from it. The key point is that now dma_pool_free() is used in axi_dmac_free_desc() to free the blocks and that just frees the blocks from the pool in the sense they can be used again. In other words, no actual call to dma_free_coherent() happens. That only happens when destroying the pool in axi_dmac_free_chan_resources() which does not happen in any interrupt context.

kernel: netfilter: flowtable: use correct direction to set up tunnel route

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit

In the Linux kernel, the following vulnerability has been resolved: ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit ca8210_test_int_driver_write() and ca8210_test_int_user_read() exchange a kmalloc'd buffer pointer through a struct kfifo, but pass a literal '4' as the byte count to kfifo_in()/kfifo_out(). This is correct on 32-bit (pointer = 4 bytes), but on 64-bit only the low 4 bytes of the 8-byte pointer are written into the FIFO. The reader then reads back 4 bytes into an 8-byte local pointer variable, leaving the upper 4 bytes uninitialized stack data. The first dereference of the reconstructed pointer (fifo_buffer[1]) accesses an arbitrary kernel address and generally results in an oops. Use sizeof(fifo_buffer) so the byte count matches pointer width on every architecture. The driver has no architecture restriction in Kconfig, so any 64-bit build with CONFIG_IEEE802154_CA8210_DEBUGFS=y is exposed. Issue has been latent since the driver was added in 2017 because it is most commonly deployed on 32-bit MCUs. Found via a custom Coccinelle semantic patch hunting for short-byte kfifo I/O on byte-mode kfifos used to shuttle pointers.

Cisco IOS XE Software Security Hardening Release

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XE Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20269 are related to issues with improper control of a resource through its lifetime that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-664.

Cisco RoomOS Security Hardening Release - Resource Lifetime Management Vulnerabilities

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco RoomOS engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20158 are related to improper control of a resource through its lifetime that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-664.

OpenChoreo: Unauthenticated access to data-plane operations via OpenChoreo cluster-gateway management APIs

OpenChoreo is a complete, open-source developer platform for Kubernetes. Prior to 1.0.2 and 1.1.2, internal/cluster-gateway/server.go served caller-facing management APIs on the externally reachable agent listener without authentication, allowing network-reachable attackers to invoke /api/proxy/ and /api/exec/ operations, proxy the data-plane Kubernetes API, and execute commands in workload pods in multi-cluster deployments. This issue is fixed in versions 1.0.2 and 1.1.2.

OpenPLC Runtime v3 Persistent DoS

OpenPLC Runtime v3 contains an input validation flaw in the /upload-program-action endpoint: the epoch_time field supplied during program uploads is not validated and can be crafted to induce corruption of the programs database. After a successful malformed upload the runtime continues to operate until a restart; on restart the runtime can fail to start because of corrupted database entries, resulting in persistent denial of service requiring complete rebase of the product to recover. This vulnerability was remediated by commit 095ee09.

Uninitialized mutex in TLS trusted-credential backend causes kernel NULL-deref DoS under contention

The PSA Protected Storage credential backend (subsys/net/lib/tls_credentials/tls_credentials_trusted.c) declared its credential-store mutex as a plain zero-filled static struct k_mutex credential_lock; and never called k_mutex_init() on it. A statically zero-filled k_mutex has an uninitialized wait queue (its dlist head/tail are NULL instead of the self-referential sentinels that k_mutex_init/K_MUTEX_DEFINE install). The uncontended lock path does not touch the wait queue, so the defect is latent and serialized use behaves correctly. When two execution contexts contend on the lock, k_mutex_lock() pends the blocking thread on the wait queue via z_pend_curr(), which calls sys_dlist_append() on the zeroed list and dereferences a NULL tail pointer (tail->next = node), faulting the kernel. The lock is held during TLS handshake credential loading and by all credential add/get/delete operations, so a deployment performing concurrent TLS handshakes (for example a server handling multiple simultaneous connections from a remote peer) or a credential-management operation concurrent with a handshake can trigger the dereference. The impact is a denial of service: a deterministic kernel panic / device reset on the first contention. There is no memory corruption beyond the NULL dereference and no confidentiality or integrity impact; mutual exclusion on the fast path remains correct. Exposure is limited to builds with CONFIG_TLS_CREDENTIALS_BACKEND_PROTECTED_STORAGE enabled (PSA Protected Storage / TF-M platforms); the default volatile RAM backend initializes its lock correctly and is unaffected. The fix initializes the mutex statically with K_MUTEX_DEFINE(credential_lock), providing a valid wait queue so the contended path no longer touches a NULL list.

btrfs: tracepoints: fix sleep while in atomic context in btrfs_sync_file()

In the Linux kernel, the following vulnerability has been resolved: btrfs: tracepoints: fix sleep while in atomic context in btrfs_sync_file() The trace event btrfs_sync_file() is called in an atomic context (all trace events are) and its call to dput(), which is needed due to the call to dget_parent(), can sleep, triggering a kernel splat. This can be reproduced by enabling the trace event and running btrfs/056 from fstests for example. The splat shown in dmesg is the following: [53.919] BUG: sleeping function called from invalid context at fs/dcache.c:970 [53.947] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 32773, name: xfs_io [53.988] preempt_count: 2, expected: 0 [53.967] RCU nest depth: 0, expected: 0 [53.943] Preemption disabled at: [53.944] [<0000000000000000>] 0x0 [54.078] CPU: 0 UID: 0 PID: 32773 Comm: xfs_io Tainted: G W 7.1.0-rc1-btrfs-next-232+ #1 PREEMPT(full) [54.070] Tainted: [W]=WARN [54.071] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [54.072] Call Trace: [54.074] <TASK> [54.076] dump_stack_lvl+0x56/0x80 [54.079] __might_resched.cold+0xd6/0x10f [54.072] dput.part.0+0x24/0x110 [54.078] trace_event_raw_event_btrfs_sync_file+0x75/0x140 [btrfs] [54.089] btrfs_sync_file+0x1ed/0x530 [btrfs] [54.087] ? __handle_mm_fault+0x8ae/0xed0 [54.089] btrfs_do_write_iter+0x172/0x210 [btrfs] [54.091] vfs_write+0x21f/0x450 [54.094] __x64_sys_pwrite64+0x8d/0xc0 [54.096] ? do_user_addr_fault+0x20c/0x670 [54.099] do_syscall_64+0x60/0xf20 [54.092] ? clear_bhb_loop+0x60/0xb0 [54.094] entry_SYSCALL_64_after_hwframe+0x76/0x7e So stop using dget_parent() and dput() and access the parent dentry directly as dentry->d_parent. This is also what ext4 is doing in its equivalent trace event ext4_sync_file_enter().

openstack-designate: designate: mDNS NOTIFY handler DoS via pool-blind zone lookup

In OpenStack Designate before 22.0.2, the mDNS handler performs pool-blind lookups when resolving record queries and NOTIFY requests. When two zones with the same name exist across different pools, the lookup fails with a deterministic error, causing the handler to return REFUSED for all DNS queries through that path. The _handle_notify path is exploitable via a single unauthenticated UDP packet. This is independently reachable through the cross-tenant zone overlap described in a different recent CVE, and also affects legitimate same-tenant cross-pool configurations. BIND9 views do not mitigate this issue as mDNS is a shared service upstream of any view configuration.

Docker Sandboxes ICMP egress restriction bypass after daemon restart

Docker Sandboxes (sbx) blocks ICMP egress with an authorizer applied only at network-creation time, and does not re-apply it to networks rebuilt from disk when the Docker daemon restarts, so a restart-surviving sandbox forwards ICMP to arbitrary hosts. A workload inside a sandbox, which the threat model treats as untrusted, can therefore defeat the documented ICMP egress block to perform network reconnaissance and exfiltrate data over an ICMP covert channel, regardless of the configured allowlist.

gpio: shared: fix deadlock on shared proxy's parent removal

In the Linux kernel, the following vulnerability has been resolved: gpio: shared: fix deadlock on shared proxy's parent removal Commit 710abda58055 ("gpio: shared: call gpio_chip::of_xlate() if set") used the mutex embedded in struct gpio_shared_entry to protect the offset field which now can be modified after assignment. The critical section however is too wide and introduced a potential deadlock on the removal of the shared GPIO proxy's parent. Make the critical section shorter - only protect the offset when it's being read. While at it: mention the fact that the entry lock is now also used to protect against concurrent access to the offset field in the structure's documentation.

HID: wacom: use GFP_ATOMIC in wacom_wac_queue_flush()

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: use GFP_ATOMIC in wacom_wac_queue_flush() wacom_wac_queue_flush() is called via the .raw_event callback (wacom_raw_event → wacom_wac_pen_serial_enforce → wacom_wac_queue_flush). For USB HID devices, this callback is invoked from hid_irq_in(), which is a URB completion handler running in atomic context. Using GFP_KERNEL in this path can sleep, leading to a "scheduling while atomic" bug. Use GFP_ATOMIC instead. The existing code already handles allocation failure by skipping the fifo entry and continuing.

Firmware Improper Initialization Leading to Local Information Disclosure in Intel AMT

Improper initialization in some firmware for some Intel(R) Active Management Technology (Intel(R) AMT), and some Intel(R) Standard Manageability may allow an information disclosure. System software adversary with a privileged user combined with a low complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

drm/imagination: Fit paired fragment job in the correct CCCB

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fit paired fragment job in the correct CCCB For geometry jobs with a paired fragment job, at the moment, the DRM scheduler's prepare_job() callback: - checks for internal (driver) dependencies for the geometry job; - calls into pvr_queue_get_paired_frag_job_dep() to check for external dependencies for the fragment job (the two jobs are submitted together but the common scheduler code doesn't know about it, so this needs to be done at this point in time); - calls into the prepare_job() callback again, but for the fragment job, to check its internal dependencies as well, passing the fragment job's drm_sched_job and the geometry job's drm_sched_entity / pvr_queue. The problem with the last step is that pvr_queue_prepare_job() doesn't always take the mismatched fragment job and geometry queue into account, in particular when checking whether there is space for the fragment command to be submitted, so the code ends up checking for space in the geometry (i.e. wrong) CCCB. The rest of the nested prepare_job() callback happens to work fine at the moment as the other internal dependencies are not relevant for a paired fragment job. Move the initialisation of a paired fragment job's done fence and CCCB fence to pvr_queue_get_paired_frag_job_dep(), inferring the correct queue from the fragment job itself. This fixes cases where prepare_job() wrongly assumed that there was enough space for a paired fragment job in its own CCCB, unblocking run_job(), which then returned early without writing the full sequence of commands to the CCCB. The above lead to kernel warnings such as the following and potentially job timeouts (depending on waiters on the missing commands): [ 552.421075] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#2: kworker/u16:5/63 [ 552.421230] Modules linked in: [ 552.421592] CPU: 2 UID: 0 PID: 63 Comm: kworker/u16:5 Tainted: G W 7.0.0-rc2-gc5d053e4dccb #39 PREEMPT [ 552.421625] Tainted: [W]=WARN [ 552.421637] Hardware name: Texas Instruments AM625 SK (DT) [ 552.421655] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched] [ 552.421744] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 552.421766] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] [ 552.421850] lr : pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr] [ 552.421923] sp : ffff800084c47650 [ 552.421936] x29: ffff800084c47740 x28: 0000000000000df8 x27: ffff800088a77000 [ 552.421979] x26: 0000000000000030 x25: ffff800084c47680 x24: 0000000000001000 [ 552.422017] x23: ffff800084c47820 x22: 1ffff00010988ecc x21: 0000000000000008 [ 552.422055] x20: 0000000000000208 x19: ffff000006ad5a88 x18: 0000000000000000 [ 552.422093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000 [ 552.422130] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 552.422167] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3 [ 552.422204] x8 : 00000000f2f2f200 x7 : ffff700010988ecc x6 : 0000000000000008 [ 552.422241] x5 : 0000000000000000 x4 : 1ffff0001114ee00 x3 : 0000000000000000 [ 552.422278] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f [ 552.422316] Call trace: [ 552.422330] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P) [ 552.422411] pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr] [ 552.422486] pvr_queue_run_job+0x3a4/0x990 [powervr] [ 552.422562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched] [ 552.422623] process_one_work+0x520/0x1288 [ 552.422657] worker_thread+0x3f0/0xb3c [ 552.422679] kthread+0x334/0x3d8 [ 552.422706] ret_from_fork+0x10/0x20

Chrome AI Component Vulnerability Enables Sandbox Escape

Inappropriate implementation in AI in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Low)

openssh: OpenSSH: ssh-agent allows remote execution of local operations

In ssh-agent in OpenSSH before 10.5, some operations can occur remotely but were intended to occur only locally, including operations that add tokens or use keys. This is caused by misinteraction between agent locking and the session-bind@openssh.com extension.

A vulnerability in the ingress flow creation functionality of Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause the CPU to increase upwards of 100% utilization, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to incorrect handling of an internal software lock that could prevent other system processes from getting CPU cycles, causing a high CPU condition. An attacker could exploit this vulnerability by sending a steady stream of malicious IP packets that can cause connections to be created on the targeted device. A successful exploit could allow the attacker to exhaust CPU resources, resulting in a DoS condition during which traffic through the device could be delayed. This vulnerability applies to either IPv4 or IPv6 ingress traffic. This vulnerability affects Cisco Adaptive Security Appliance (ASA) and Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliances (ASAv), Firepower 2100 Series Security Appliances, Firepower 4110 Security Appliances, Firepower 9300 ASA Security Modules. Cisco Bug IDs: CSCvf63718.