Code Execution Through Init Script Upload Race in JetBrains Datalore

In JetBrains Datalore before 2026.4 code execution was possible in another user's computation via an init script upload race condition

Microsoft Trace Data Helper Elevation of Privilege Vulnerability

Use after free in Microsoft Trace Data Helper allows an authorized attacker to elevate privileges locally.

Time-of-check time-of-use (TOCTOU) race condition in Sandisk Dashboard Installer

A time-of-check to time-of-use (TOCTOU) race condition in the Sandisk Dashboard installer allows a local, authenticated standard user to replace an installer-staged binary in a user-writable temporary directory between validation and execution. The elevated installer then executes the attacker-controlled binary, resulting in local privilege escalation to a high-integrity (administrative) context. This issue affects Sandisk Dashboard through 5.2.2.3.

ClassFactory Race Condition and Retained Assembly Memory in Telerik UI for ASP.NET MVC

In affected versions of Progress® Telerik® UI for ASP.NET MVC `2012.2.710` through `2026.3.811`, ClassFactory updates a shared class dictionary without exclusive write protection and emits non-collectible dynamic assemblies that remain loaded for the AppDomain's lifetime. The dictionary lookup and insertion are not atomic, and case variations in aggregate descriptors can produce distinct retained types even though member resolution is case-insensitive. An unauthenticated remote attacker can exploit this if the application exposes an aggregation endpoint that is reachable without authentication, by submitting concurrent or repeated crafted requests. These requests may corrupt dictionary state or increase CPU and memory use, potentially degrading availability. The issue is fixed in version `2026.3.1015`.

serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ

In the Linux kernel, the following vulnerability has been resolved: serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ When uart_flush_buffer() runs before the DMA completion IRQ is delivered, the following race can occur (all steps serialized by uart_port_lock): 1. DMA starts: tx_remaining = N, kfifo contains N bytes 2. DMA completes in hardware; IRQ is pending but not yet delivered 3. uart_flush_buffer() acquires the port lock and calls kfifo_reset(), making kfifo_len() = 0 while tx_remaining remains N 4. uart_flush_buffer() releases the port lock 5. DMA IRQ fires; handle_tx_dma() acquires the port lock and calls uart_xmit_advance(uport, tx_remaining) on an empty kfifo uart_xmit_advance() increments kfifo->out by tx_remaining. Since kfifo_reset() already set both in and out to 0, out wraps past in, causing kfifo_len() to return UART_XMIT_SIZE - tx_remaining. The next start_tx_dma() call then submits a DMA transfer of stale buffer data. Fix this by snapshotting kfifo_len() at the start of handle_tx_dma() and skipping uart_xmit_advance() when fifo_len < tx_remaining, which indicates the kfifo was reset by a preceding flush.

In multiple locations, there is a possible use-after-free due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.

batman-adv: tp_meter: avoid divide-by-zero for dec_cwnd

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: avoid divide-by-zero for dec_cwnd The cwnd is always MSS <= cwnd <= 0x20000000. But the calculation in batadv_tp_update_cwnd() assumes unsigned 32 bit arithmetics. ((mss * 8) ** 2) / (cwnd * 8) In case cwnd is actually 0x20000000, it will be shifted by 3 bit to the left end up at 0x100000000 or U32_MAX + 1. It will therefore wrap around and be 0 - resulting in: ((mss * 8) ** 2) / 0 This is of course invalid and cannot be calculated. The calculation should must be simplified to avoid this overflow: (mss ** 2) * 8 / cwnd It will keep the precision enhancement from the scaling (by 8) but avoid the overflow in the divisor. In theory, there could still be an overflow in the dividend. It is at the moment fixed to BATADV_TP_PLEN in batadv_tp_recv_ack() - so it is not an imminent problem. But allowing it to use the whole u32 bit range, would mean that it can still use up to 67 bits. To keep this calculation safe for 32 bit arithmetic, mss must never use more than floor((32 - 3) / 2) bits - or in other words: must never be larger than 16383.

Windows Win32k Elevation of Privilege Vulnerability

Use after free in Windows Win32K allows an authorized attacker to elevate privileges locally.

net/handshake: Use spin_lock_bh for hn_lock

In the Linux kernel, the following vulnerability has been resolved: net/handshake: Use spin_lock_bh for hn_lock nvmet_tcp_state_change(), a socket callback that runs in BH context, can reach handshake_req_cancel() via nvmet_tcp_schedule_release_queue() and tls_handshake_cancel(). handshake_req_cancel() acquires hn->hn_lock with plain spin_lock(). If a process-context thread on the same CPU holds hn->hn_lock when a softirq invokes the cancel path, the lock attempt deadlocks. This is the only caller that invokes tls_handshake_cancel() from BH context; every other consumer calls it from process context. Deferring the cancel to process context in the NVMe target is not straightforward: nvmet_tcp_schedule_release_queue() must call tls_handshake_cancel() atomically with its state transition to DISCONNECTING. If the cancel were deferred, the handshake completion callback could fire in the window before the cancel runs, observe the unexpected state, and return without dropping its kref on the queue. Reworking that interlock is considerably more invasive than hardening the handshake lock. Convert all hn->hn_lock acquisitions from spin_lock/spin_unlock to spin_lock_bh/spin_unlock_bh so the lock is never taken with softirqs enabled.

binder: fix UAF in binder_free_transaction()

In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_free_transaction() In binder_free_transaction(), the t->to_proc is read under the t->lock. However, once the t->lock is dropped, the to_proc can die in parallel. This leads to a use-after-free error when we attempt to acquire its inner lock right afterwards: ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x1a0 Write of size 4 at addr ffff00001125da70 by task B/672 CPU: 20 UID: 0 PID: 672 Comm: B Not tainted 7.1.0-rc6-00284-g8e65320d91cd #4 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x1a0 binder_free_transaction+0x8c/0x320 binder_send_failed_reply+0x21c/0x2f8 binder_thread_release+0x488/0x7e0 binder_ioctl+0x12c0/0x29a0 [...] Allocated by task 675: __kmalloc_cache_noprof+0x174/0x444 binder_open+0x118/0xb70 do_dentry_open+0x374/0x1040 vfs_open+0x58/0x3bc [...] Freed by task 212: __kasan_slab_free+0x58/0x80 kfree+0x1a0/0x4a4 binder_proc_dec_tmpref+0x32c/0x5e0 binder_deferred_func+0xc48/0x104c process_one_work+0x53c/0xbc0 [...] ================================================================== To prevent this, pin the target thread (t->to_thread) to guarantee the target process remains alive. Undelivered transactions without a target thread are already safe, as the target process can only be the current context in those paths.

mm/damon/ops-common: handle extreme intervals in damon_hot_score()

In the Linux kernel, the following vulnerability has been resolved: mm/damon/ops-common: handle extreme intervals in damon_hot_score() Fix three issues in damon_hot_score() that comes from wrong handling of extreme (zero or too high) monitoring intervals user setup. When the user sets sampling interval zero, damon_max_nr_accesses(), which is called from damon_hot_score(), causes a divide-by-zero. Needless to say, it is a problem. When the user sets the aggregation interval zero, the function returns zero. It is wrong, since the real maximum nr_acceses in the setup should be one. Worse yet, it can cause another divide-by-zero from its caller, damon_hot_score(), since it uses damon_max_nr_accesses() return value as a denominator. When the user sets the aggregation interval very high, damon_hot_score() could return a value out of [0, DAMOS_MAX_SCORE] range. Since the return value is used as an index to the regions_score_histogram array, which is DAMOS_MAX_SCORE+1 size, it causes out of bounds array access. The issues can be relatively easily reproduced like below. The sysfs write permission is required, though. # ./damo start --damos_action lru_prio --damos_quota_space 100M \ --damos_quota_interval 1s # cd /sys/kernel/mm/damon/admin/kdamonds/0 # echo 0 > contexts/0/monitoring_attrs/intervals/sample_us # echo 0 > contexts/0/monitoring_attrs/intervals/aggr_us # echo commit > state # dmesg [...] [ 131.329762] Oops: divide error: 0000 [#1] SMP NOPTI [...] [ 131.336089] RIP: 0010:damon_hot_score+0x27/0xd0 [...] Fix the divide-by-zero intervals problems by explicitly handling the zero intervals in damon_max_nr_accesses(). Fix the out-of-bound array access by applying [0, DAMOS_MAX_SCORE] bounds before returning from damon_hot_score(). The issue was discovered [1] by Sashiko.

ALSA: usb-audio: avoid kobject path lookup in DualSense match

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: avoid kobject path lookup in DualSense match The DualSense jack-detection input handler verifies that a matching input device belongs to the same physical controller by building kobject path strings for both the input device and the USB audio device, then comparing the path prefix. This was observed when a weak physical connection caused the controller to rapidly disconnect and reconnect. During that repeated hotplug, snd_dualsense_ih_match() can run while the controller's USB device is being disconnected. kobject_get_path() walks ancestor kobjects and dereferences their names; if the USB device kobject name is no longer valid, this can fault in strlen(): RIP: 0010:strlen+0x10/0x30 Call Trace: kobject_get_path+0x34/0x150 snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio] input_register_device+0x566/0x6a0 ps_probe+0xb89/0x1590 [hid_playstation] The same ownership check can be done without building kobject path strings. The input device is parented below the HID device, USB interface and USB device, so walking the input device parent chain and comparing against the mixer USB device preserves the check without dereferencing kobject names during disconnect.

net/handshake: Drain pending requests at net namespace exit

In the Linux kernel, the following vulnerability has been resolved: net/handshake: Drain pending requests at net namespace exit The arguments to list_splice_init() in handshake_net_exit() are reversed. The call moves the local empty "requests" list onto hn->hn_requests, leaving the local list empty, so the subsequent drain loop runs zero iterations. Pending handshake requests that had not yet been accepted are not torn down when the net namespace is destroyed; each one keeps a reference on a socket file and on the handshake_req allocation. Pass the source and destination in the documented order (list_splice_init(list, head) moves list onto head) so the pending list is transferred to the local scratch list and drained through handshake_complete(). Fixing the splice direction exposes a list-corruption race. After the splice each req->hr_list still has non-empty link pointers, threading the stack-local scratch list rather than hn_requests. A concurrent handshake_req_cancel() -- for example, from sunrpc's TLS timeout on a kernel socket whose netns reference was not taken -- finds the request through the rhashtable, calls remove_pending(), and sees !list_empty(&req->hr_list). __remove_pending_locked() then list_del_init()s an entry off the scratch list while the drain iterates, corrupting it. The same call arriving after the drain loop has run list_del() on an entry hits LIST_POISON instead. Have remove_pending() check HANDSHAKE_F_NET_DRAINING under hn_lock and report not-found when drain is in progress. The drain has already taken ownership; handshake_complete()'s existing test_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitrates between drain and cancel for who calls the consumer's hp_done. Use list_del_init() rather than list_del() in the drain so req->hr_list does not carry LIST_POISON after drain releases the entry. The DRAINING guard in remove_pending() makes cancel return false, but cancel still falls through to test_and_set_bit on HANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference. Without another pin, if that is the last reference, sk_destruct frees the request while it is still linked on the drain loop's local list. Pin each request's hr_file under hn_lock before releasing the list, and drop that drain pin after the loop finishes with the request.

dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work

In the Linux kernel, the following vulnerability has been resolved: dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work The change_work was introduced to send device change notifications from DPLL device callbacks without deadlocking on dpll_lock, since the callbacks are already invoked under that lock. Now that __dpll_device_change_ntf() is exported for callers that already hold dpll_lock, use it directly and remove the change_work infrastructure entirely. This eliminates a race condition where change_work could be re-scheduled after cancel_work_sync() during device teardown, potentially causing the handler to dereference a freed or NULL dpll_dev pointer.

Windows Overlay Filter Elevation of Privilege Vulnerability

Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Overlay Filter allows an authorized attacker to elevate privileges locally.

Windows Installer Elevation of Privilege Vulnerability

Time-of-check time-of-use (toctou) race condition in Windows Installer allows an authorized attacker to elevate privileges locally.

Windows Connected User Experiences and Telemetry Elevation of Privilege Vulnerability

Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Connected User Experiences and Telemetry allows an authorized attacker to elevate privileges locally.

Windows Feedback Hub Elevation of Privilege Vulnerability

Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Feedback Hub allows an authorized attacker to elevate privileges locally.

Windows Installer Elevation of Privilege Vulnerability

Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Installer allows an authorized attacker to elevate privileges locally.

Connected Devices Platform Service (Cdpsvc) Elevation of Privilege Vulnerability

Use after free in Connected Devices Platform Service (Cdpsvc) allows an authorized attacker to elevate privileges locally.