ThreadX Modules invokes trace-full callbacks after module unload

In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, ThreadX Modules does not revoke a module's trace-buffer-full callback when the module is stopped and unloaded. With event tracing enabled and a kernel-owned trace buffer still active, a later buffer wrap invokes the callback from privileged thread context after the module's code has been released, so a user-mode module can have its code run with kernel privileges after unload, or, once the memory is reused, redirect control flow or cause a fault.

Heap exhaustion via unbounded simple string or bulk string allocation in Vert.x Redis client

In Eclipse Vert.x versions [4.0.0, 4.5.35] or [5.0.0, 5.2.2], when a malicious server keeps sending bytes on an EOL-terminated line (not length-prefixed, for example a simple string [1]), we'll keep growing the buffer without bounds, eventually leading to an OOM. We need to have a configurable limit for EOL-terminated lines. If a malicious server sends a specially crafted RESP response (for example a bulk string [2] with missing CRLF trailer), the parser enters an infinite loop where it keeps parsing the same buffer and pushing the same response to the caller, which may lead e.g. to an OOM if the consumer just buffers the responses. We must fix the parser to avoid this infinite looping.

CachingWebClient shares user-specific HTTP responses across users via the shared cache tier

In Eclipse Vert.x versions [4.0.0,4.5.35] or [5.0.0,5.2.2], when one `CachingWebClient` is shared across users — the documented pattern of a per-user `WebClientSession` over a shared caching client — a response that is specific to one user but is cacheable and not marked `private`/`no-store` is stored in the client-level shared cache tier and served to other users requesting the same URL. A later user's session, or an anonymous caller through the same client, can receive an earlier user's response. Depending on the response this discloses authenticated content or a session cookie, the latter enabling session fixation or hijacking.

In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the four non-secure-callable secure stack functions of the TrustZone-M ports dereference a thread pointer supplied by the non-secure world without checking that it points to non-secure memory. Non-secure code can make the secure firmware reveal which secure bytes are zero, write chosen secure words, and fault the secure world, breaking TrustZone-M isolation and enabling recovery of secure-world secrets such as cryptographic keys.

In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, built with TX_ENABLE_EVENT_TRACE, the Module Manager lets a user-mode, memory-protected module register any function pointer as the kernel's trace-buffer-full callback, which the kernel calls from privileged code when the trace buffer wraps. A malicious module can thereby run its own code with kernel privilege, defeating module isolation, or fault the kernel with an invalid pointer.

Heap exhaustion via unbounded line accumulation in Vert.x STOMP FrameParser

In Eclipse Vert.x versions [4.0.0, 4.5.35] or [5.0.0, 5.2.2], the `FrameParser` in vertx-stomp creates a `RecordParser` without setting `maxRecordSize`, so any peer that streams bytes continuously without a newline character causes the parser to accumulate data indefinitely. Both the STOMP server and the STOMP client are affected: a malicious server can exploit this against a connecting client, and a malicious client can exploit this against a server before or after authentication. Sustained byte streaming exhausts JVM heap memory, crashing the affected process and causing a complete denial of service.

Module Manager loaders leave the manager mutex held when a module preamble's sizes overflow, blocking every later module operation

In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the Module Manager loaders return an overflow error without releasing the Module Manager mutex when a module preamble declares a data or stack size that overflows the allocation arithmetic. Loading such an image blocks every later module load, start, stop and unload from other threads until the system is reset.

User-mode module can suspend, terminate, re-prioritise and abort the waits of threads it does not own

In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the Module Manager's thread-control services do not check that a thread passed by a user-mode, memory-protected module belongs to that module. Any loaded module can suspend, resume, terminate, reset or re-prioritise application threads and other modules' threads and abort their waits, denying service or changing how the system schedules them.

Cortex-M module ports save a preempted user-mode module thread's registers through its unchecked stack pointer in privileged mode

In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the PendSV handler of the Cortex-M module ports saves a preempted user-mode module thread's registers in privileged mode at addresses taken from the thread's stack pointer, without checking that pointer against the thread's stack. A user-mode, memory-protected module can thereby write up to nine words, eight of its choosing, or 25 with floating-point state, into memory immediately below any region it may write, and read back what is stored there.

NULL pointer dereference in ICMPv6 Packet Too Big processing when the destination table is full

In Eclipse ThreadX NetX Duo versions 6.4.5.202504 through 6.5.2.202603a, built with IPv6 path MTU discovery, the ICMPv6 Packet Too Big handler uses the destination-table entry it adds without checking that the add succeeded. A sender on the network can fill the destination table with Packet Too Big messages quoting new destinations, after which the next message makes the IP helper thread dereference a NULL pointer, crashing it on targets that fault on address 0 and stopping all network processing.

HmacShaCryptor.Hash never hashes its input — returns constant HMAC_K("") for all inputs, voiding CBC-HMAC JWE integrity

`HmacShaCryptor.Hash` never hashed its input. For any input it returned `HMAC_K("")` — the MAC of the empty message under the key. Every AES-CBC-HMAC JWE produced or verified by gose therefore carried an authentication tag that is constant per key and independent of the message, removing ciphertext integrity entirely.

JweDirectDecryptorBlock.Decrypt: unchecked _thales_aad length header reachable with forged tag → index-out-of-range / slice-bounds panic and unbounded allocation

`JweDirectDecryptorBlock.Decrypt` read a 64-bit plaintext length from the `_thales_aad` protected-header field and used it without any validation. A truncated field panics `binary.BigEndian.Uint64`, an oversized value drives an unbounded allocation, and a value larger than the decrypted block panics with a slice-bounds error.

JweRsaKeyEncryptionDecryptorImpl.Decrypt panics on attacker-chosen IV length (stdlib GCM.Open reached without nonce-size check)

`JweRsaKeyEncryptionDecryptorImpl.Decrypt` passed the JWE's initialization vector to `cipher.AEAD.Open` without checking its length. The Go standard library **panics** rather than returning an error when a GCM nonce is not exactly `NonceSize()` bytes, so a JWE carrying a wrong-sized IV crashes the decrypting goroutine.

JwtVerifierImpl.Verify does not enforce the JWS `crit` header (RFC 7515 §4.1.11)

gose parsed the JWS `crit` header into `JwsHeader.Crit` and then never read it. RFC 7515 §4.1.11 requires a recipient to reject a JWS whose listed critical extension parameters it does not understand. gose implements no header extensions, so every token carrying a non-empty `crit` should have been rejected — and none were.

LoadPublicKey panics on kty/alg mismatch (kty=EC with a non-EC alg) via unchecked *ECDSAOptions type assertion

`LoadPublicKey` resolved an EC key's curve with an unchecked type assertion, `algToOptsMap[alg].(*ECDSAOptions)`. A JWK declaring `"kty":"EC"` together with a non-EC `"alg"` — which RFC 7517 §4.4 permits — reaches that assertion and **panics**.

JwtClaims.MarshalJSON panics via reflect.StructOf when any untyped claim key is not a valid Go identifier suffix

`JwtClaims.MarshalJSON` built a Go struct at runtime with `reflect.StructOf`, synthesising a field named `"A" + claimName` for each untyped claim. `reflect.StructOf` **panics** when a field name is not a valid Go identifier, or when it duplicates another field. Both conditions are reachable from ordinary JWT claim names.

Quadratic-time key_ops duplicate check lets a sub-1 MB JWKS body pin a CPU core for ~15 s

`jwkFields.CheckConsistency` detected duplicate `key_ops` entries with a pairwise nested loop, making validation cost grow with the **square** of the entry count. Because the check runs on every JWK and JWKS unmarshal, a modestly sized but hostile JWKS document could occupy a CPU core for many seconds.

JwksTrustStore.Get returns the last fetched JWKS key (err=nil) when the requested kid is absent, instead of nil

`JwksTrustStore.Get` assigned each parsed key to the function's **named return value** while refreshing the JWKS cache. When the requested `kid` was not present, the trailing naked `return` handed the caller the last key in the JWKS document together with a `nil` error — a confidently wrong answer instead of "not found".

AesGcmCryptor.Open passes attacker-controlled nonce to cipher.AEAD.Open without length check, causing panic on wrong-size IV

`AesGcmCryptor.Open` passed a caller-supplied nonce straight to `cipher.AEAD.Open` without checking its length. The Go standard library **panics** rather than returning an error when a GCM nonce is not exactly `NonceSize()` bytes, so a JWE carrying a wrong-sized IV crashes the decrypting goroutine.

JITServer: Pre-authentication remote crash via integer underflow and out-of-bounds heap read in DataDescriptor deserialization

In Eclipse OpenJ9 versions prior to 0.63.0, the JITServer component fails to perform cross-field validation on attacker-controlled `_size`, `_paddingSize`, and `_dataOffset` fields during `DataDescriptor` message deserialization. An unauthenticated remote attacker can send a crafted network payload that triggers an unsigned integer underflow in `DataDescriptor::getPayloadSize()` and `DataDescriptor::getNextDescriptor()`. This results in an out-of-bounds heap read and an immediate process crash (SIGSEGV), causing a denial of service.