Search vulnerabilities

Results 29,329

Export CSV
CVE-2026-74751

riscv: lib: Fix ZBB strnlen reading past count boundary

In the Linux kernel, the following vulnerability has been resolved: riscv: lib: Fix ZBB strnlen reading past count boundary The ZBB-optimized strnlen loop loads one word ahead before checking the aligned boundary: REG_L t1, SZREG(t0) // load next word addi t0, t0, SZREG // advance orc.b t1, t1 bgeu t0, t4, 4f // boundary check AFTER load where t4 = (s + count) & -SZREG. When s is aligned and count is a multiple of SZREG, t4 equals s + count and the loop loads a full word starting at exactly s + count. If s + count falls on a page boundary with the next page unmapped, this faults. Fix by computing the aligned boundary from the last valid byte (s + count - 1) instead of s + count. This makes the loop stop at the word containing the last valid byte rather than potentially loading the word after it. The count == 0 case is already handled by the beqz early exit. Also add a pre-loop guard (bgeu t0, t4) for the case where all valid bytes fit within the first word. With the adjusted boundary, t4 can equal t0, and entering the loop with stale register state from the first-word processing would produce incorrect results. The final minu clamp ensures the result is still correct when the last loaded word extends past s + count - 1 within the same aligned word.

CVSS 3.1 · 9.4 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-48422

Substance3D - Sampler | Heap-based Buffer Overflow (CWE-122)

Substance3D - Sampler is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-48423

Substance3D - Sampler | Heap-based Buffer Overflow (CWE-122)

Substance3D - Sampler is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-34642

After Effects | Heap-based Buffer Overflow (CWE-122)

After Effects versions 26.0, 25.6.4 and earlier are affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-45201

GPU DDK - Incorrect page size validation in PhysmemNewRamBackedPMR could lead to OOB read and/or write of arbitrary physical memory

Software installed and run as a non-privileged user may conduct improper GPU system calls to pass invalid log2 page size when allocating physical pages leading to OOB read and/or write due to improper validation of the said value. Such crafted log2 page size could lead to 4K pages being treated as higher order pages and allowing read and/or write access to the memory beyond 4K threshold.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-79239

Out of bounds read in Tint in Google Chrome on on Android prior to 152.0.7977.65 allowed a remote attacker to potentially read memory inside the sandbox via a crafted HTML page. (Chromium security severity: Low)

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-48428

Substance3D - Designer | Heap-based Buffer Overflow (CWE-122)

Substance3D - Designer is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-48430

Substance3D - Designer | Heap-based Buffer Overflow (CWE-122)

Substance3D - Designer is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-48431

Substance3D - Designer | Heap-based Buffer Overflow (CWE-122)

Substance3D - Designer is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-48432

Substance3D - Designer | Heap-based Buffer Overflow (CWE-122)

Substance3D - Designer is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-48433

Substance3D - Designer | Heap-based Buffer Overflow (CWE-122)

Substance3D - Designer is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-81579

An untrusted Pointer Dereference can be exploited to escalate privileges by an unprivileged user on Windows

In WibuKey for Windows before version 6.71, an untrusted pointer dereference in the WibuKey2_64.sys kernel driver for 64-bit Windows allows an attacker to exploit a write-what-where primitive, enabling local privilege escalation. This can be leveraged to execute arbitrary code, run an administrator shell, or gain full control over the system.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-79911

TOTOLINK N600R CGI cstecgi.cgi setSystemConfig stack-based overflow

A security vulnerability has been detected in TOTOLINK N600R 4.3.0cu.7647_B20210106. The affected element is the function setSystemConfig of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument Hostname leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used.

CVSS 4.0 · 10 Critical EPSS 1.1% KEV · Not listed
Vendors
CVE-2026-78049

Systerel S2OPC AddNodes Service sopc_node_mgt_helper_internal.c out-of-bounds

A vulnerability has been found in Systerel S2OPC up to 1.7.3. Impacted is the function SOPC_NodeMgtHelperInternal_AddVariableNodeAttributes of the file src/ClientServer/address_space/internal/sopc_node_mgt_helper_internal.c of the component AddNodes Service. The manipulation of the argument UserAccessLevel leads to out-of-bounds read. It is possible to initiate the attack remotely. A high degree of complexity is needed for the attack. The exploitability is considered difficult. The exploit has been disclosed to the public and may be used. The identifier of the patch is aafbd37d381b618312ebdf5ddf57027f62c14fdd. It is suggested to install a patch to address this issue.

CVSS 4.0 · 6.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-71936

DrayTek VigorSwitch Multiple Models Buffer Overflow via sysreboot

Multiple DrayTek VigorSwitch models contain a buffer overflow vulnerability in the sysreboot function. The vulnerability is caused by unsafe concatenation of split valueN data into a fixed-size buffer. A remote attacker can trigger this vulnerability via crafted input, causing a denial of service or potentially executing arbitrary commands. Exploitation requires valid administrative credentials for the device's web management interface.

CVSS 4.0 · 8.6 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-17124

Vulnerabilities in IBM AIX and PowerVM VIOS

IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to execute arbitrary code due to an out-of-bounds read.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Ibm
Products
CVE-2026-77652

Dia: dia: heap buffer overflow in wpg colormap parser via out-of-bounds palette index

A heap-based buffer overflow vulnerability exists in the Dia diagram editor WPG file format importer. In plug-ins/wpg/wpg-import.c, the WPG import renderer allocates a fixed palette with: ren->pPal = g_new0(WPGColorRGB, 256); When handling a WPG_COLORMAP record, the parser reads a start index (i16) and number of colors (iNum16) from the file and reads palette data with: bRet &= (iNum16 == (int)fread(&ren->pPal[i16], sizeof(WPGColorRGB), iNum16, f)); The only bounds-related check is `if (i16 >= 0 && i16 <= iSize)`, where iSize is the WPG record size—not the palette capacity. There is no validation that i16 is less than 256 or that i16 + iNum16 does not exceed 256. A malicious WPG file can supply i16=256 and iNum16=264. That causes fread() to write 792 bytes starting at &pPal[256], while the palette buffer is only 768 bytes (256 entries × 3 bytes). This overflows into adjacent heap metadata and can crash Dia (SIGABRT / malloc corruption errors) or, depending on heap layout and exploit primitives, potentially lead to arbitrary code execution. Exploitation requires convincing a user to open a crafted WPG file via Dia's file dialog, command line, or file association. No special privileges are required to deliver the file to the victim. Affected component: WPG parser (plug-ins/wpg/wpg-import.c). Affected versions: all Dia versions containing this code path (reporter tested Dia 0.98+git20260221-1; issue present on upstream master as of 2026-08-21).

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
Dia
CVE-2026-55059

OpenEXR: OpenEXRUtil SampleCountChannel row setter heap has an out-of-bounds write vulnerability

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. Versions prior to 3.2.10, 3.3.12 and 3.4.13 contain a heap out-of-bounds write in Imf_4_0::SampleCountChannel::set(int r, unsigned int newNumSamples[]). The row-based sample-count setter computes the target Y coordinate with dataWindow.min.x instead of dataWindow.min.y. For a valid deep image data window where min.x != min.y, a valid row index can be translated into an invalid Y coordinate, causing writes before the allocated _numSamples buffer. The vulnerability is reachable through the public OpenEXRUtil DeepImage API and can lead to heap corruption and process crashes. This issue has been fixed in versions 3.2.10, 3.3.12 and 3.4.13.

CVSS 3.1 · 6.1 Medium EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2026-69550

Windows App for Mac Information Disclosure Vulnerability

Out-of-bounds read in Remote Desktop Client allows an unauthorized attacker to disclose information over a network.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-71941

DrayTek VigorSwitch Multiple Models Buffer Overflow via diag_logmail

Multiple DrayTek VigorSwitch models contain a buffer overflow vulnerability in the diag_logmail function. The vulnerability is caused by concatenating multiple smtpReceiver email addresses into a fixed-size buffer without checking the remaining buffer size. A remote attacker can trigger this vulnerability via crafted input, causing a denial of service or potentially executing arbitrary commands. Exploitation requires valid administrative credentials for the device's web management interface.

CVSS 4.0 · 8.6 High EPSS < 1% KEV · Not listed
Vendors