dmaengine: dw-edma: Initialize IRQ data before requesting IRQs

In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Initialize IRQ data before requesting IRQs dw_edma_irq_request() passes struct dw_edma_irq to request_irq() before dw_edma_channel_setup() fills the back pointer. A shared interrupt can therefore enter the handler with dw_irq->dw still NULL, leading to a NULL pointer dereference. Set the back pointer before installing each handler.

LoongArch: Do not save/restore percpu base register in rethook trampoline

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Do not save/restore percpu base register in rethook trampoline The rethook trampoline saves $r21 ($u0), the percpu base, into its frame at entry and restores it at exit. Inbetween rethook_trampoline_handler() may schedule via preempt_enable_notrace(). If the task migrates to another CPU, the frame's $r21 holds the old CPU's percpu base, and restoring it poisons $r21 on the new CPU. Until the next user->kernel transition heals $r21, all this_cpu_*() accesses (runqueues, RCU per-CPU data, timer tick programming, FPU ownership) hit the wrong CPU's percpu area. Under kretprobe-heavy preemptible load this can corrupt scheduler and timer state: scheduling-while-atomic splats, wrong-CPU RCU warnings, WARN_ON_ONCE(rq != this_rq()) in nohz_balance_exit_idle(), and CPUs parking in the idle loop with the constant timer never re-armed (hard lockup). Reproduces on a Loongson-3A6000 with kretprobes on VFS paths plus heavy file churn (OS install / unsquashfs). By convention $r21 always holds the current CPU's percpu base in kernel mode: SAVE_SOME() at exception entry reloads it only when coming from user mode, and RESTORE_SOME() restores it only when returning to user mode; the context-switch path never writes it. Therefore the live $r21 at trampoline exit is already correct, and nothing inbetween can change it legitimately (kernel C code cannot write a global register variable). The same flaw existed even in the pre-rethook kretprobe trampoline since v6.3; it was carried over when rethook replaced it. Drop both the save and the restore here. Drop the restore is enough to solve the issue, and drop the save is to keep the code tidy and no need to clear it.

KVM: arm64: Sign-extend VA for range-based TLBI invalidation

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Sign-extend VA for range-based TLBI invalidation When the decode_range_tlbi() helper was moved to be used for S1 TLBIs, the required sign extension was omitted. Add it. As a result, special care must be taken to not overflow PA bits when this is used for S2 invalidation.

vm2 3.11.4 through 3.11.6 Sandbox Symbol Filtering Bypass

vm2 versions 3.11.4 through 3.11.6 incompletely filter Node.js registered internal symbols across the sandbox boundary. The extraction filters in lib/setup-sandbox.js and the cross-realm symbol checks and write traps in lib/bridge.js use a fixed list of known dangerous registered symbols that omits nodejs.stream.disturbed and nodejs.stream.errored, which are exposed on host WebStream prototypes on newer Node.js releases (validated on Node.js v25.8.0). When the embedder exposes a host WebStream object and the host stream/web module to the sandbox, sandbox code can obtain the real host symbols via Object.getOwnPropertySymbols(streamWeb.ReadableStream.prototype) and use them as write keys on host stream objects, corrupting host-visible stream state — for example making stream.Readable.isDisturbed() return false for an already-consumed stream. This can bypass host logic that relies on Node's public stream-state helpers to enforce one-shot body consumption, reject errored streams, or decide whether a stream is safe to hand to another component. It is not a host code-execution primitive in the reported proof of vulnerability. This is an incomplete fix for the earlier nodejs.* symbol filtering issue. Fixed in vm2 3.11.7.

vm2 3.11.3 through 3.11.6 HTTPS Credential Exposure via globalAgent

vm2 versions 3.11.3 through 3.11.6 expose the host process's real https.globalAgent to sandboxed code when a NodeVM is explicitly configured to allow require('https'). The builtin loader wraps host modules in a read-only proxy, but method calls such as Agent.prototype.on() are forwarded to the underlying host object, so sandbox code can register a listener for the agent's 'free' event. When an unrelated host HTTPS request releases a pooled connection, the listener receives the live host request options and the host TLSSocket, allowing sandboxed code to read the host's Authorization header and private destination host/port, attach a data listener to the released socket and read subsequent host response bodies in plaintext, and issue attacker-chosen authenticated requests using the stolen credentials. The issue is fixed in 3.11.7.

Improper initialization in Network in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium)

Cisco Secure Email Gateway Security Hardening Release

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Secure Email Gateway and Cisco Secure Email and Web Manager engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20353 are related to issues with improper control of a resource through its lifetime that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-664.

ca-certificates: ca-certificates: Failure to remove TrustCor root certificates

The ca-certificates package before ca-certificates-2021.2.50-72 for Amazon Linux 2 (AL2) does not properly remove certain TrustCor root certificates from the root store. NOTE: this issue exists because of an incorrect fix for CVE-2022-23491.

An issue was discovered in the ProofreadPage extension for MediaWiki through 1.39.3. It leaks information about a suppressed user via the API and config variables.

Improper resource exposure in Preload in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium)

Cisco IOS XR Software Security Hardening Release: September 2026

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XR Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20274 are related to improper resource control issues that are grouped under the Common Weakness Enumeration (CWE) CWE-664.

djust's observability endpoints are network-exposed: the localhost gate is an opt-in middleware the docs omit, and the views enforce only DEBUG

djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, djust's observability endpoints expose live view/session state and a remote method-invocation surface (`eval_handler`). The localhost restriction was an opt-in middleware that the documented setup omits; the views themselves enforced only `DEBUG`. In the misconfigured-but-documented scenario (DEBUG on, middleware not installed) a non-localhost client could read live application state and invoke handlers remotely. This issue is fixed in djust 1.0.7. The localhost restriction is enforced in-view on every observability endpoint (no longer dependent on a separately-installed middleware), and `eval_handler` is restricted; gated requests receive a non-disclosing response. As a workaround, ensure `DEBUG=False` in production, and do not expose the observability endpoints to untrusted networks.

pcre2: PCRE2: Information disclosure via pcre2_serialize_encode

In PCRE2 before 10.48, pcre2_serialize_encode might disclose two bytes to an adversary, typically in a situation where the access available to the adversary is already unsafe.

Semantic Cache Cross-Tenant Isolation Bypass via SHA-256 Truncation

In Spring AI's Semantic Cache support, the context hash used to isolate cached responses between different system prompts could allow cached responses to be shared across unrelated contexts. Affected versions: Spring AI: 2.0.0

Improper Locking Enables File System Access in Dell Secure Connect Gateway 5.0

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Locking vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to filesystem access for attacker.

netty-incubator-codec-ohttp: [OHttpServerCodec] Native Direct-Memory Leak on AEAD Decryption Failure Leads to Gateway Denial of Service

netty-incubator-codec-ohttp implements Oblivious HTTP (OHTTP) gateway and client functionality using Netty. Prior to 0.0.23.Final, the OHTTP gateway decryption path in codec-ohttp/src/main/java/io/netty/incubator/codec/ohttp/OHttpRequestResponseContext.java allocates a pooled direct ByteBuf for decrypted plaintext before the AEAD tag is verified. When an invalid tag causes decryptChunk() to throw CryptoException, OHttpRequestResponseContext.decodeChunk() does not release the ByteBuf because the allocation is not guarded by try/finally. Repeated invalid encrypted requests can therefore leak native off-heap memory until the gateway is unable to continue serving requests. This issue is fixed in version 0.0.23.Final.

Floodlight 71fe8a7 allows disruption of host communication via link spoofing. A port is misclassified as a non-boundary.

An issue was discovered in the CheckUser extension for MediaWiki through 1.39.3. Special:CheckUserLog shows usernames that have been hidden.

In Oraios AI Serena before 1.0.0, the listen address of the MCP server in HTTP mode is 0.0.0.0. NOTE: the Supplier observed that 0.0.0.0 was a "potential security hazard" but the Serena documentation, at the time of the issue report proposing 127.0.0.1 instead of 0.0.0.0, recommended "use a sandboxed environment for running Serena."

Mbed TLS Vulnerability Allowing Unadvertised Group During TLS 1.3 HelloRetryRequest

In Mbed TLS 3.6.x before 3.6.7 and 4.1.x before 4.1.2, the TLS 1.3 client accepts HelloRetryRequest selecting an unadvertised group.