Search vulnerabilities

Results 1,969

Export CSV
CVE-2026-96780

figlet is vulnerable to denial of service via unbounded loop when whitespaceBreak is used with a small width

figlet.js is a FIG driver written in JavaScript that aims to implement the FIGfont specification. Prior to 1.11.3, text() and textSync() can enter an unbounded loop when whitespaceBreak is enabled and width is smaller than the rendered width of a single FIGlet character. Under these conditions, breakWord() cannot find a valid break point and returns without consuming a character, so generateFigTextLines() repeatedly processes the same input while consuming CPU and growing memory. The non-default option and attacker-controlled width must both reach an affected call. This issue is fixed in version 1.11.3.

CVSS 4.0 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-93925

Apache Thrift: C++ `THeaderTransport::writeVarint32()` stack buffer overflow on a negative protocol id

Stack-based buffer overflow, Incorrect bitwise shift of integer vulnerability in Apache Thrift C++ THeaderProtocol. This issue affects Apache Thrift: before 0.25.0. Users are recommended to upgrade to version 0.25.0, which fixes the issue.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-91137

Apache Thrift: PHP `thrift_protocol` accelerator: zero-byte container elements

Improper validation of specified quantity in input, Allocation of resources without limits or throttling, Excessive Iteration vulnerability in Apache Thrift PHP bindings. This issue affects Apache Thrift: before 0.25.0. Users are recommended to upgrade to version 0.25.0, which fixes the issue.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-102253

iperf3 < 3.22 UDP Receive Worker Infinite Loop DoS

iperf3 versions prior to 3.22 contains a denial of service vulnerability that allows unauthenticated remote attackers to crash-loop the server's UDP receive worker into an unrecoverable infinite loop by sending a single crafted control-channel parameter message followed by one 16-byte UDP datagram. Attackers can permanently pin the affected per-stream receive thread at approximately 100% CPU usage, rendering the server unusable until forcibly killed with SIGKILL, as the process does not respond to normal control-channel closure.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Es
Products
CVE-2026-103492

Denial of Service via Crafted PSD Attachments in JetBrains YouTrack

In JetBrains YouTrack before 2026.2.19422 doS attack was possible via crafted PSD attachments

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-102511

Apache PLC4X, Apache PLC4X, Apache PLC4X, Apache PLC4X: ADS discovery accepts spoofed responses and derives the connection target from them

Improper Verification of Source of a Communication Channel in the ADS discovery of the Go implementation of Apache PLC4X (PLC4Go) allows an attacker able to send UDP datagrams to the discovering host to redirect subsequent connections to an arbitrary, attacker-chosen address. The discovery result's connection address was derived from the AmsNetId claimed in the response body rather than from the datagram's actual source address. One spoofed discovery response can therefore insert an inventory entry pointing at any host, including hosts outside the local network, and an application that connects to discovered devices will open its ADS session, including any configured route credentials, to that host. Additionally, discovery listeners in both implementations can be disabled by a single malformed datagram: - In PLC4Go ADS discovery, a short version block causes a panic that ends the listener for the rest of the discovery call, so legitimate devices answering afterwards are not reported. - In PLC4J, the ADS and EtherNet/IP discoverers stop on an unhandled exception from a malformed response. - The PLC4J Modbus discoverer can be made to spin indefinitely, consuming a CPU core, by a scanned host that sends a partial response. Exploitation requires the application to invoke the discovery API, which is opt-in, and for the connection redirect, to act on the discovered items. This issue affects Apache PLC4X: PLC4Go from 0.11.0 before 1.0.0; PLC4J ADS and Modbus drivers from 0.10.0 before 1.0.0; PLC4J EtherNet/IP driver from 0.11.0 before 1.0.0. PLC4Go is consumed as the Go module github.com/apache/plc4x/plc4go; versions refer to the corresponding Apache PLC4X releases. Users are recommended to upgrade to version 1.0.0, which fixes the issue. Version 1.0.0 derives the connection address from the datagram's source address and logs a warning when the claimed AmsNetId disagrees with it.

CVSS 4.0 · 8.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-95274

chromium-browser: chromium-browser: Improper output encoding in DevTools

Improper output encoding in DevTools in Google Chrome prior to 154.0.8037.57 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High)

CVSS 3.1 · 8.3 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-84463

Zammad: Stored HTML injection in Knowledge Base video widget enables forced session switching via unescaped iframe attribute

Zammad is a web based open source helpdesk/customer support system. Prior to 7.1.2, a user with Knowledge Base editing rights for a category can embed a video widget in a published answer with a specially crafted value. When the answer is rendered, that value is inserted into the page's HTML without being escaped for its attribute context, allowing it to break out and inject additional HTML into the page. When another user who has permission to switch between user sessions views the affected answer, the injected HTML causes their browser to silently send a request to Zammad's session-switching endpoint using their own active credentials. This results in switching their session to an account chosen by the person who wrote the Knowledge Base answer. No action is required from the viewer beyond opening the published answer. This issue is fixed in version 7.1.2.

CVSS 4.0 · 6.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-97546

xfs: don't spin forever on zero-length dirents when salvaging them

In the Linux kernel, the following vulnerability has been resolved: xfs: don't spin forever on zero-length dirents when salvaging them LOLLM noticed that xrep_dir_recover_data can spin forever if it encounters an unused dirent that claims to have length zero. Fix that, and prevent the same thing from happening with a zero-length entry.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-82560

Pod::Text versions before 6.1.1 for Perl allow CPU and memory exhaustion formatting a POD document whose =over nesting drives the margin to the output width

Pod::Text versions before 6.1.1 for Perl allow CPU and memory exhaustion formatting a POD document whose =over nesting drives the margin to the output width. Each =over adds its indent to the margin, which wrap() subtracts from the output width to get the space available for text. When that space reaches zero, the line-splitting substitution matches the empty string, and the loop consumes no input while appending the margin padding on every pass. Formatting an attacker-supplied POD document never returns, and the output grows until memory is exhausted.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-87082

Net::IDN::Punycode versions before 2.590 for Perl hang, crash or return a wrong label via unvalidated malformed UTF-8 in encode_punycode

Net::IDN::Punycode versions before 2.590 for Perl hang, crash or return a wrong label via unvalidated malformed UTF-8 in encode_punycode. Neither backend checks that its input is well-formed UTF-8, so a string with the UTF-8 flag set over malformed bytes, as the :utf8 PerlIO layer produces from any malformed input, reaches the encoder unchecked. On perl 5.32 and later the XS backend reports a malformed sequence with a length of `(STRLEN)-1`, so the scan steps back one byte instead of forward and never ends. On earlier perls the XS returns a valid label for a different name. The pure-Perl backend runs a regex over the flagged string. Depending on the bytes, it aborts with SIGBUS on perl 5.28 and later, dies with a panic, or returns a wrong label. The documented conversion functions match the label against Unicode properties first and that match dies on such a string, so only a direct call to encode_punycode reaches the defect. The decoder is not affected. A direct caller encoding attacker-supplied bytes hangs, crashes or gets a label for a name the input never held.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-84375

js-yaml: maxTotalMergeKeys does not limit CPU use for empty merge sources

js-yaml is a JavaScript YAML parser and dumper. From 3.0.0 until 3.15.2, 4.3.2, and 5.4.1, maxTotalMergeKeys in lib/js-yaml/loader.js and lib/loader.js does not count empty mapping sources while processing the merge key <<. An attacker can alias a large sequence of empty mappings into many merge targets, causing O(N * K) processing while totalMergeKeys remains unchanged and the configured resource limit is never reached. A relatively small YAML document can therefore cause prolonged CPU consumption in applications that parse untrusted YAML, and merge processing is enabled by default on these release lines. In v3 & v4, merge is enabled by default so the severity score is higher. This issue is fixed in versions 3.15.2, 4.3.2, and 5.4.1.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-46352

Suricata defrag: fragmented encapsulated traffic with fragments can lead to deadlock

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Starting in version 8.0.0 and prior to version 8.0.5, Suricata's IP defragmentation code could deadlock when processing fragmented traffic containing an encapsulated tunnel protocol whose payload is itself fragmented. Version 8.0.5 contains a fix. No known workarounds are available.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-53493

Containerd has image-pull DoS via crafted OCI index graph amplification

containerd is an open-source container runtime. Prior to versions 1.7.36, 2.0.13, 2.2.9, 2.3.6, and 2.4.1, a crafted OCI index graph can force very high CPU/memory usage during PullImage (before container start), causing long ContainerCreating stalls and, at larger sizes, node/runtime instability. Versions 1.7.36, 2.0.13, 2.2.9, 2.3.6, and 2.4.1 fix the issue.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-81885

radare2: Infinite relocation-chain loop causes denial of service in radare2 NE parser

radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's NE relocation fixup-chain parser was vulnerable because the NE relocation parser followed fixup chains without an active iteration limit or cycle detection. The vulnerability is triggered by opening a crafted NE executable whose in-bounds relocation entry points back to itself instead of reaching 0xffff. The parser repeatedly processed the same relocation and allocated another relocation object on each iteration. This can cause denial of service through continuous CPU and memory consumption. This issue is fixed in version 6.2.0.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-55373

OpenEXR: OpenEXRUtil SampleCountChannel endEdit() can loop forever on UINT_MAX sample counts

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. Versions prior to 3.2.10, 3.3.12, and 3.4.13 contain an infinite-loop vulnerability in SampleCountChannel. The helper roundListSizeUp() rounds a sample-list size up to the next power of two using repeated unsigned left shifts, which terminates for normal values but fails for UINT_MAX: the sequence reaches 0x80000000, and the next left shift wraps the 32-bit value to 0. Because 0 remains less than UINT_MAX, the loop never progresses and never exits. The bug is reachable through public OpenEXRUtil APIs, either by editing the sample-count buffer through SampleCountChannel::Edit (whose destructor calls endEdit()) or by calling SampleCountChannel::set(x, y, UINT_MAX) on a valid pixel. This issue has been fixed in versions 3.2.10, 3.3.12, and 3.4.13.

CVSS 3.1 · 6.2 Medium EPSS < 1% KEV · Not listed
Products
CVE-2026-81880

radare2: Uncontrolled resource consumption in radare2 PEF loader

radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's Apple Preferred Executable Format loader was vulnerable because the PEF loader accepted relocSecCount values that were not bounded by the number of sections or complete relocation records in the input. The vulnerability is triggered by normal binary-format auto-detection of a small crafted Apple PEF file. The loader could perform up to 268,435,456 relocation-section iterations and repeated buffer operations after record offsets passed the end of the file. This can cause denial of service through excessive CPU consumption and prolonged processing. This issue is fixed in version 6.2.0.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-97956

net: net_failover: Fix the deadlock in net_failover_slave_name_change()

In the Linux kernel, the following vulnerability has been resolved: net: net_failover: Fix the deadlock in net_failover_slave_name_change() This is a sibling fix of commit b84c5632c7b3 ("net: net_failover: Fix the deadlock in slave register"). There is netdev_lock_ops() in the upper callers, so using netif_open() instead of dev_open(). Call Trace: __schedule+0x2bb/0x650 schedule+0x27/0xb0 schedule_preempt_disabled+0x15/0x30 __mutex_lock.constprop.0+0x550/0xaf0 __mutex_lock_slowpath+0x13/0x20 mutex_lock+0x3b/0x50 dev_open+0x3b/0xe0 net_failover_slave_name_change+0x22/0x40 failover_event+0xd4/0x1e0 notifier_call_chain+0x62/0xf0 raw_notifier_call_chain+0x16/0x30 call_netdevice_notifiers_info+0x50/0x80 netif_change_name+0x200/0x330 do_setlink.isra.0+0xb12/0xdf0 ? security_capable+0x9a/0x1e0 ? ns_capable+0x31/0x60 rtnl_setlink+0x302/0x670 ? netlink_recvmsg+0x296/0x340 ? security_capable+0x9a/0x1e0 ? __pfx_rtnl_setlink+0x10/0x10 rtnetlink_rcv_msg+0x384/0x460 ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x61/0x120 rtnetlink_rcv+0x15/0x30 netlink_unicast+0x28f/0x3c0 netlink_sendmsg+0x216/0x450 __sys_sendto+0x222/0x230 __x64_sys_sendto+0x24/0x40 x64_sys_call+0x1d5d/0x2390 do_syscall_64+0x105/0x5a0 ? do_syscall_64+0x140/0x5a0 ? exc_page_fault+0x94/0x1e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-87721

Denial of Service via Exponential Backtracking in ANTLR Search Query Parser in Gerrit Code Review

Uncontrolled Resource Consumption (CWE-400 / CWE-407) in the ANTLR 3 search query parser (QueryParser / Query.g) in Gerrit Code Review versions 2.0.19 through 3.12.9, 3.13.0 through 3.13.8, and 3.14.0 through 3.14.2 allows an unauthenticated remote attacker (or an authenticated user if anonymous read access is disabled) to cause a persistent denial of service (CPU exhaustion and HTTP worker thread pool starvation requiring a server restart) via crafted search queries containing deeply nested parentheses sent to query evaluation endpoints (/changes/?q=, /accounts/?q=, /groups/?query=, /projects/?query=, /Documentation/?q=, /changes/{id}/query?expression=, or SSH gerrit query). Because syntactic predicates in conditionOr and conditionAnd recurse via conditionBase without memoization prior to capability or visibility checks and worker threads do not abort when the client disconnects, a small number of requests (such as 25 requests matching default httpd.maxThreads) can permanently pin all HTTP worker threads. This issue is fixed in Gerrit Code Review versions 3.12.10, 3.13.9, and 3.14.3.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-93214

usb: gadget: f_tcm: fix deadlock in usbg_make_tpg()

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: fix deadlock in usbg_make_tpg() usbg_make_tpg() held dep_lock while calling configfs_depend_item_unlocked(), which acquires the configfs root inode lock when operating across subsystems. This creates a circular lock dependency with configfs_rmdir(): dep_lock -> configfs root inode lock -> su_mutex -> dep_lock In usbg_make_tpg(), dep_lock only serialized the read of opts->ready, which is a monotonic flag that transitions from false to true exactly once (in tcm_set_name()) and never reverts. Remove dep_lock from usbg_make_tpg() entirely and use READ_ONCE/WRITE_ONCE to access opts->ready locklessly instead.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products