xfs: fix another iunlink infinite loop bug in online fsck

In the Linux kernel, the following vulnerability has been resolved: xfs: fix another iunlink infinite loop bug in online fsck xrep_iunlink_resolve_bucket is supposed to reconstruct as much of the incore prev and next unlinked list pointers based on what it finds on disk and in memory before we move on to relinking the truly lost inodes back into the unlinked list. However, it's still vulnerable to infinite loops that come in via the next_unlinked pointers. Fix this problem by remembering which inodes we've already seen and checking new agino pointers against that. If a bit is already set, either this is a loop or the inode has nonzero link count. We'll deal with the second case in a subsequent patch.

kernel: usb: hcd: malformed USB descriptor leads to infinite loop in usb_giveback_urb()

Rejected because the CVE description attributes a vulnerability to a non-existent Linux kernel function (usb_giveback_urb()) and the reported issue cannot be mapped to any valid codebase.

Denial of Service in GNU wget

GNU wget is vulnerable to denial of service in its FTP OPIE/S-KEY authentication functionality. The server-supplied sequence number from the FTP challenge line is used as an iteration count for an MD5 key-derivation loop without any upper bound validation. A malicious FTP server or a network attacker positioned to intercept FTP traffic can send a crafted OPIE challenge with a sequence number near INT_MAX, causing wget to perform up to approximately 2.1 billion MD5 computations and suspend for some time. The --timeout option does not mitigate this because it applies only to network I/O, not CPU computation. This issue was fixed in commit e9697d98e7249b0f68a6be040a4f3dcc5bc101fa

LiquidJS: An infinite loop vulnerability in `strip_html` filter

LiquidJS is a Shopify / GitHub Pages compatible template engine in pure JavaScript. From 10.26.0 until 10.27.1, the strip_html filter in src/filters/html.ts can enter an infinite loop when an input string contains <, includes at least one preceding character, and has no later >. In strip_html, the search for the next opener advances lt while the loop index remains unchanged when the closer search returns -1, and the equality-only stall guard does not exit because the loop index is less than lt. Reprocessing the same state indefinitely blocks template rendering and can cause denial of service with an input as short as a<. This issue is fixed in version 10.27.1.

picotls has infinite recursion in the minicrypto ASN.1 decoder

Picotls is a TLS protocol library that allows users select different crypto backends based on their use case. Picotls implements its own ASN.1 validation helper, which is used by the minicrypto backend while parsing local PKCS#8 private keys. Prior to commit c14231d801407640bc42c2dcf92783409ea6a7c7, the validator recursively descends into constructed ASN.1 elements without enforcing a maximum nesting depth. If an application loads an attacker-supplied private-key file through ptls_minicrypto_load_private_key(), or otherwise calls the public ASN.1 validation API on untrusted DER, a crafted deeply nested ASN.1 structure can exhaust the process stack and crash the application. Note that the libcrypto (OpenSSL) backend does not use the ASN.1 validation helper of picotls, and therefore is immune to this vulnerability. The vulnerability has been addressed in commit c14231d801407640bc42c2dcf92783409ea6a7c7.

spi: xilinx: use FIFO occupancy register to determine buffer size

In the Linux kernel, the following vulnerability has been resolved: spi: xilinx: use FIFO occupancy register to determine buffer size The method the driver uses to determine the size of the FIFO has a problem. What it currently does is this: It stops the SPI hardware and writes to the TX FIFO register until TX FIFO FULL asserts in the status register. But the hardware does not only have the FIFO, it also has a shift register which can hold a byte. This can be seen, when writing a byte to the FIFO (while the SPI hardware is stopped,) the TX FIFO EMPTY is still empty. So, if we have a FIFO size of 16 for example, the current method returns a 17. This is a problem, at least when using the driver in irq mode. The same size determined for the TX FIFO is also assumed for the RX FIFO. When a SPI transaction wants to write the amount of the FIFO size or more bytes, the following happens, for example with 16 bytes FIFO size: The driver stops the SPI hardware and writes 17 bytes to the TX FIFO and starts the SPI hardware and goes sleep. The hardware then shifts out 17 bytes (FIFO + shift register) and simultaneously reads bytes into the RX FIFO, but it only has 16 places, so it looses one byte. Then TX FIFO empty asserts, wakes the driver again, which has a fast path and reads 16 bytes from the RX FIFO, but before reading the last 17th byte (which is lost) it does this: sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); if (!(sr & XSPI_SR_RX_EMPTY_MASK)) { xilinx_spi_rx(xspi); rx_words--; } It reads the status register and checks if the RX FIFO is not empty. But it is empty in our case. So this check spins in a while loop forever locking the driver. This patch fixes the logic to determine the FIFO size.

rxrpc: Fix potential infinite loop in rxrpc_recvmsg()

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix potential infinite loop in rxrpc_recvmsg() Fix the wait in rxrpc_recvmsg() also take check the oob queue.

django CMS: Plugin move endpoint allows cyclic reparenting (DoS)

django CMS is an easy-to-use and developer-friendly enterprise content management system powered by Django. Prior to 5.0.8, the move_plugin endpoint in cms/admin/placeholderadmin.py accepts an attacker-controlled plugin_parent value without rejecting a plugin’s own identifier or a descendant identifier. A staff user with plugin-change permission under CMS_PERMISSION can create a parent_id cycle in the plugin tree. The _get_descendants_cte and _get_ancestors_cte queries in cms/models/pluginmodel.py have no cycle guard, so get_descendants() and later rendering, copy, or delete operations can recurse indefinitely or reach a database recursion limit, corrupting the tree and consuming request workers. This issue is fixed in versions 5.0.8.

Cisco Secure Firewall Threat Defense Software Snort 3 Visual Basic for Application Infinite Loop Denial of Service Vulnerability

Multiple Cisco products are affected by a vulnerability in the Snort 3 VBA feature that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to crash.&nbsp; This vulnerability is due to improper error checking when decompressing VBA data. An attacker could exploit this vulnerability by sending crafted VBA data to the Snort 3 Detection Engine on the targeted device. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to enter an infinite loop, causing a DoS condition.

nanoid Infinite Loop via Negative Size in non-secure module

nanoid (Nano ID) before 3.3.16 and 5.1.16 contains an infinite loop in the customAlphabet and nanoid functions of its non-secure module (nanoid/non-secure). When these functions are given a negative size, the loop counter is decremented from a negative value and never reaches its termination condition, spinning indefinitely and hanging the calling thread. An application that passes an unvalidated, attacker-controlled negative size to these functions is exposed to a denial-of-service condition.

fflate through 0.8.2 is vulnerable to denial of service via an infinite loop in unzipSync(). A crafted ZIP archive with a central directory entry declaring compressed_size=0xFFFFFFFF (ZIP64 sentinel) but missing the required ZIP64 extra field tag 0x0001 causes z64e() to loop indefinitely due to out-of-bounds reads returning undefined, which coerces to 0, keeping the loop condition permanently true.

usb: gadget: printer: fix infinite loop in printer_read()

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: printer: fix infinite loop in printer_read() printer_read() uses the same variable for the requested copy size and the number of bytes actually copied to user space. copy_to_user() returns the number of bytes not copied, so when it fails to copy anything, the computed copied length becomes zero. In that case len, buf, current_rx_bytes and current_rx_buf are left unchanged. If RX data is available and the user buffer remains unwritable, the read loop can repeat indefinitely. Track the copied length separately and return -EFAULT, or the number of bytes already copied, if an iteration makes no progress.

Security vulnerabilities have been found in IBM Verify Identity Access and IBM Security Verify Access

IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 is vulnerable to a denial of service attack.

Zeroconf: Unbounded recursion in DNS compression-pointer decoder allows LAN-local denial of service

Zeroconf is a pure Python implementation of multicast DNS service discovery. Prior to 0.149.5, DNSIncoming._decode_labels_at_offset recurses once per DNS-name compression pointer, and a single mDNS packet carrying chained pointers can trigger a RecursionError that escapes DNSIncoming.__init__, causing sustained CPU burn, log flooding, and degraded mDNS-dependent features for unauthenticated hosts on the local link over UDP/5353 (224.0.0.251 / ff02::fb). This issue is fixed in version 0.149.5.

Ktor WebSocket Decompression Denial of Service Vulnerability

In JetBrains Ktor before 3.4.1 potential DoS attack via WebSocket decompression was possible

pds_core: fix error handling in pdsc_devcmd_wait

In the Linux kernel, the following vulnerability has been resolved: pds_core: fix error handling in pdsc_devcmd_wait Fix two cases where pdsc_devcmd_wait() returns stale success from the completion register instead of an error: 1. FW crash: If firmware stops running, the wait loop breaks early with running=false. The condition "if ((!done || timeout) && running)" is false, so error handling is bypassed and stale status is returned. Check !running first and return -ENXIO. 2. Timeout: If a command times out, err is set to -ETIMEDOUT but then overwritten by pdsc_err_to_errno(status) which reads stale status. Return -ETIMEDOUT immediately after cleaning up. Both errors now propagate to pdsc_devcmd_locked() which queues health_work for recovery.

IBM i is Affected By Multiple Vulnerabilities in Host Servers

IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to an infinite loop.

Nmap 7.99 Denial of Service via Zero-Length TCP Option Packet

Nmap versions up to and including 7.99 contains a denial of service vulnerability that allows remote attackers to crash the application by sending a crafted packet containing a zero-length TCP option. The malformed packet forces the Packet:parse_options() function in nselib/packet.lua to allocate objects in an infinite loop, causing an out-of-memory condition that results in application crash.

rsync 3.1.0 < 3.5.0 Signed Integer Overflow via MSG_IO_TIMEOUT

rsync 3.1.0 before 3.5.0 contains a signed integer overflow vulnerability in the I/O timeout implementation that allows attackers to permanently disable connection timeouts by injecting MSG_IO_TIMEOUT messages carrying non-positive (zero or negative) values. Attackers can craft malicious MSG_IO_TIMEOUT messages that cause the timeout variable to wrap to a non-positive value, preventing the timeout check from firing and enabling idle or stalled connections to hold daemon slots indefinitely, leading to resource exhaustion.

fs/ntfs3: prevent infinite loops caused by the next valid being the same

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: prevent infinite loops caused by the next valid being the same When processing valid within the range [valid : pos), if valid cannot be retrieved correctly, for example, if the retrieved valid value is always the same, this can trigger a potential infinite loop, similar to the hung problem reported by syzbot [1]. Adding a check for the valid value within the loop body, and terminating the loop and returning -EINVAL if the value is the same as the current value, can prevent this. [1] INFO: task syz.4.21:6056 blocked for more than 143 seconds. Call Trace: rwbase_write_lock+0x14f/0x750 kernel/locking/rwbase_rt.c:244 inode_lock include/linux/fs.h:1027 [inline] ntfs_file_write_iter+0xe6/0x870 fs/ntfs3/file.c:1284