h2 webconsole (available only in prototype mode) should nevertheless be disabled by default.

When running in prototype mode, the h2 webconsole module (accessible from the Prototype menu) is automatically made available with the ability to directly query the database. It was felt that it is safer to require the developer to explicitly enable this capability. As of 2.0.0-M8, this can now be done using the 'isis.prototyping.h2-console.web-allow-remote-access' configuration property; the web console will be unavailable without setting this configuration. As an additional safeguard, the new 'isis.prototyping.h2-console.generate-random-web-admin-password' configuration parameter (enabled by default) requires that the administrator use a randomly generated password to use the console. The password is printed to the log, as "webAdminPass: xxx" (where "xxx") is the password. To revert to the original behaviour, the administrator would therefore need to set these configuration parameter: isis.prototyping.h2-console.web-allow-remote-access=true isis.prototyping.h2-console.generate-random-web-admin-password=false Note also that the h2 webconsole is never available in production mode, so these safeguards are only to ensure that the webconsole is secured by default also in prototype mode.

Insecure default variable initialization in BIOS firmware for some Intel(R) NUC Boards and Intel(R) NUC Kits before version MYi30060 may allow an authenticated user to potentially enable denial of service via local access.

Dell PowerScale OneFS, versions 9.0.0, up to and including 9.1.0.19, 9.2.1.12, 9.3.0.6, and 9.4.0.2, contain an insecure default initialization of a resource vulnerability. A remote authenticated attacker may potentially exploit this vulnerability, leading to information disclosure.

Insecure default settings in CODESYS Runtime Toolkit 32 bit full and CODESYS PLCWinNT

In CODESYS V2 PLCWinNT and Runtime Toolkit 32 in versions prior to V2.4.7.57 password protection is not enabled by default and there is no information or prompt to enable password protection at login in case no password is set at the controller.

MotionEye v0.42.1 and below allows attackers to access sensitive information via a GET request to /config/list. To exploit this vulnerability, a regular user password must be unconfigured.

In WiFi, there is a possible disclosure of WiFi password to the end user due to an insecure default value. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-13Android ID: A-143534321

WildFly: possible information disclosure

A flaw was found in WildFly, where an attacker can see deployment names, endpoints, and any other data the trace payload may contain.

Wokka Lokka Q50 devices through 2021-11-30 allow remote attackers (who know the SIM phone number and password) to listen to a device's surroundings via a callback in an SMS command, as demonstrated by the 123456 and 523681 default passwords.

VITEC Exterity IPTV products through 2021-04-30 allow privilege escalation to root.

Insecure default configuration

Redash is a package for data visualization and sharing. If an admin sets up Redash versions 10.0.0 and prior without explicitly specifying the `REDASH_COOKIE_SECRET` or `REDASH_SECRET_KEY` environment variables, a default value is used for both that is the same across all installations. In such cases, the instance is vulnerable to attackers being able to forge sessions using the known default value. This issue only affects installations where the `REDASH_COOKIE_SECRET or REDASH_SECRET_KEY` environment variables have not been explicitly set. This issue does not affect users of the official Redash cloud images, Redash's Digital Ocean marketplace droplets, or the scripts in the `getredash/setup` repository. These instances automatically generate unique secret keys during installation. One can verify whether one's instance is affected by checking the value of the `REDASH_COOKIE_SECRET` environment variable. If it is `c292a0a3aa32397cdb050e233733900f`, should follow the steps to secure the instance, outlined in the GitHub Security Advisory.

nLight ECLYPSE (nECY) system Controllers running software prior to 1.17.21245.754 contain a default key vulnerability. The nECY does not force a change to the key upon the initial configuration of an affected device. nECY system controllers utilize an encrypted channel to secure SensorViewTM configuration and monitoring software and nECY to nECY communications. Impacted devices are at risk of exploitation. A remote attacker with IP access to an impacted device could submit lighting control commands to the nECY by leveraging the default key. A successful attack may result in the attacker gaining the ability to modify lighting conditions or gain the ability to update the software on lighting devices. The impacted key is referred to as the SensorView Password in the nECY nLight Explorer Interface and the Gateway Password in the SensorView application. An attacker cannot authenticate to or modify the configuration or software of the nECY system controller.

servicemesh-operator: NetworkPolicy resources incorrectly specify ports for ingress resources

A flaw was found in servicemesh-operator. The NetworkPolicy resources installed for Maistra do not properly specify which ports may be accessed, allowing access to all ports on these resources from any pod. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

In miniadb, there is a possible way to get read/write access to recovery system properties due to an insecure default value. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-12LAndroid ID: A-201308542

Raspberry Pi OS through 5.10 has the raspberry default password for the pi account. If not changed, attackers can gain administrator privileges.

Learningdigital.com, Inc. Orca HCM - Hard-code password

The Orca HCM digital learning platform uses a weak factory default administrator password, which is hard-coded in the source code of the webpage in plain text, thus remote attackers can obtain administrator’s privilege without logging in.

Insufficient Security Control Vulnerability

Insecure Boot Image vulnerability in Hitachi Energy Relion Relion 670/650/SAM600-IO series allows an attacker who manages to get access to the front network port and to cause a reboot sequences of the device may exploit the vulnerability, where there is a tiny time gap during the booting process where an older version of VxWorks is loaded prior to application firmware booting, could exploit the vulnerability in the older version of VxWorks and cause a denial-of-service on the product. This issue affects: Hitachi Energy Relion 670 Series 2.2.2 all revisions; 2.2.3 versions prior to 2.2.3.3. Hitachi Energy Relion 670/650 Series 2.2.0 all revisions; 2.2.4 all revisions. Hitachi Energy Relion 670/650/SAM600-IO 2.2.1 all revisions.

Tieline IP Audio Gateway 2.6.4.8 and below is affected by Incorrect Access Control. A vulnerability in the Tieline Web Administrative Interface could allow an unauthenticated user to access a sensitive part of the system with a high privileged account.

Cisco Catalyst PON Series Switches Optical Network Terminal Vulnerabilities

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

D-Link DIR-2640-US 1.01B04 is vulnerable to Incorrect Access Control. Router ac2600 (dir-2640-us), when setting PPPoE, will start quagga process in the way of whole network monitoring, and this function uses the original default password and port. An attacker can easily use telnet to log in, modify routing information, monitor the traffic of all devices under the router, hijack DNS and phishing attacks. In addition, this interface is likely to be questioned by customers as a backdoor, because the interface should not be exposed.

Undocumented Default Cryptographic Key Vulnerability in Cohesity DataPlatform version 6.3 prior 6.3.1g, 6.4 up to 6.4.1c and 6.5.1 through 6.5.1b. The ssh key can provide an attacker access to the linux system in the affected version.