Search vulnerabilities

Use the Query Builder to create your own search query, or check out the documentation to learn the search syntax.

Results 36,461

Export CSV
CVE-2026-31543

crash_dump: don't log dm-crypt key bytes in read_key_from_user_keying

In the Linux kernel, the following vulnerability has been resolved: crash_dump: don't log dm-crypt key bytes in read_key_from_user_keying When debug logging is enabled, read_key_from_user_keying() logs the first 8 bytes of the key payload and partially exposes the dm-crypt key. Stop logging any key bytes.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-31542

x86/platform/uv: Handle deconfigured sockets

In the Linux kernel, the following vulnerability has been resolved: x86/platform/uv: Handle deconfigured sockets When a socket is deconfigured, it's mapped to SOCK_EMPTY (0xffff). This causes a panic while allocating UV hub info structures. Fix this by using NUMA_NO_NODE, allowing UV hub info structures to be allocated on valid nodes.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-31531

ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop()

In the Linux kernel, the following vulnerability has been resolved: ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop() When querying a nexthop object via RTM_GETNEXTHOP, the kernel currently allocates a fixed-size skb using NLMSG_GOODSIZE. While sufficient for single nexthops and small Equal-Cost Multi-Path groups, this fixed allocation fails for large nexthop groups like 512 nexthops. This results in the following warning splat: WARNING: net/ipv4/nexthop.c:3395 at rtm_get_nexthop+0x176/0x1c0, CPU#20: rep/4608 [...] RIP: 0010:rtm_get_nexthop (net/ipv4/nexthop.c:3395) [...] Call Trace: <TASK> rtnetlink_rcv_msg (net/core/rtnetlink.c:6989) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) ____sys_sendmsg (net/socket.c:721 net/socket.c:736 net/socket.c:2585) ___sys_sendmsg (net/socket.c:2641) __sys_sendmsg (net/socket.c:2671) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Fix this by allocating the size dynamically using nh_nlmsg_size() and using nlmsg_new(), this is consistent with nexthop_notify() behavior. In addition, adjust nh_nlmsg_size_grp() so it calculates the size needed based on flags passed. While at it, also add the size of NHA_FDB for nexthop group size calculation as it was missing too. This cannot be reproduced via iproute2 as the group size is currently limited and the command fails as follows: addattr_l ERROR: message exceeded bound of 1048

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-31512

Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv()

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv() l2cap_ecred_data_rcv() reads the SDU length field from skb->data using get_unaligned_le16() without first verifying that skb contains at least L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads past the valid data in the skb. The ERTM reassembly path correctly calls pskb_may_pull() before reading the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the same validation to the Enhanced Credit Based Flow Control data path.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-31503

udp: Fix wildcard bind conflict check when using hash2

In the Linux kernel, the following vulnerability has been resolved: udp: Fix wildcard bind conflict check when using hash2 When binding a udp_sock to a local address and port, UDP uses two hashes (udptable->hash and udptable->hash2) for collision detection. The current code switches to "hash2" when hslot->count > 10. "hash2" is keyed by local address and local port. "hash" is keyed by local port only. The issue can be shown in the following bind sequence (pseudo code): bind(fd1, "[fd00::1]:8888") bind(fd2, "[fd00::2]:8888") bind(fd3, "[fd00::3]:8888") bind(fd4, "[fd00::4]:8888") bind(fd5, "[fd00::5]:8888") bind(fd6, "[fd00::6]:8888") bind(fd7, "[fd00::7]:8888") bind(fd8, "[fd00::8]:8888") bind(fd9, "[fd00::9]:8888") bind(fd10, "[fd00::10]:8888") /* Correctly return -EADDRINUSE because "hash" is used * instead of "hash2". udp_lib_lport_inuse() detects the * conflict. */ bind(fail_fd, "[::]:8888") /* After one more socket is bound to "[fd00::11]:8888", * hslot->count exceeds 10 and "hash2" is used instead. */ bind(fd11, "[fd00::11]:8888") bind(fail_fd, "[::]:8888") /* succeeds unexpectedly */ The same issue applies to the IPv4 wildcard address "0.0.0.0" and the IPv4-mapped wildcard address "::ffff:0.0.0.0". For example, if there are existing sockets bound to "192.168.1.[1-11]:8888", then binding "0.0.0.0:8888" or "[::ffff:0.0.0.0]:8888" can also miss the conflict when hslot->count > 10. TCP inet_csk_get_port() already has the correct check in inet_use_bhash2_on_bind(). Rename it to inet_use_hash2_on_bind() and move it to inet_hashtables.h so udp.c can reuse it in this fix.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-31497

Bluetooth: btusb: clamp SCO altsetting table indices

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: clamp SCO altsetting table indices btusb_work() maps the number of active SCO links to USB alternate settings through a three-entry lookup table when CVSD traffic uses transparent voice settings. The lookup currently indexes alts[] with data->sco_num - 1 without first constraining sco_num to the number of available table entries. While the table only defines alternate settings for up to three SCO links, data->sco_num comes from hci_conn_num() and is used directly. Cap the lookup to the last table entry before indexing it so the driver keeps selecting the highest supported alternate setting without reading past alts[].

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-31496

netfilter: nf_conntrack_expect: skip expectations in other netns via proc

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: skip expectations in other netns via proc Skip expectations that do not reside in this netns. Similar to e77e6ff502ea ("netfilter: conntrack: do not dump other netns's conntrack entries via proc").

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-31495

netfilter: ctnetlink: use netlink policy range checks

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: use netlink policy range checks Replace manual range and mask validations with netlink policy annotations in ctnetlink code paths, so that the netlink core rejects invalid values early and can generate extack errors. - CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at policy level, removing the manual >= TCP_CONNTRACK_MAX check. - CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE (14). The normal TCP option parsing path already clamps to this value, but the ctnetlink path accepted 0-255, causing undefined behavior when used as a u32 shift count. - CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with CTA_FILTER_F_ALL, removing the manual mask checks. - CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding a new mask define grouping all valid expect flags. Extracted from a broader nf-next patch by Florian Westphal, scoped to ctnetlink for the fixes tree.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-31483

s390/syscalls: Add spectre boundary for syscall dispatch table

In the Linux kernel, the following vulnerability has been resolved: s390/syscalls: Add spectre boundary for syscall dispatch table The s390 syscall number is directly controlled by userspace, but does not have an array_index_nospec() boundary to prevent access past the syscall function pointer tables.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-31482

s390/entry: Scrub r12 register on kernel entry

In the Linux kernel, the following vulnerability has been resolved: s390/entry: Scrub r12 register on kernel entry Before commit f33f2d4c7c80 ("s390/bp: remove TIF_ISOLATE_BP"), all entry handlers loaded r12 with the current task pointer (lg %r12,__LC_CURRENT) for use by the BPENTER/BPEXIT macros. That commit removed TIF_ISOLATE_BP, dropping both the branch prediction macros and the r12 load, but did not add r12 to the register clearing sequence. Add the missing xgr %r12,%r12 to make the register scrub consistent across all entry points.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-31462

drm/amdgpu: prevent immediate PASID reuse case

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: prevent immediate PASID reuse case PASID resue could cause interrupt issue when process immediately runs into hw state left by previous process exited with the same PASID, it's possible that page faults are still pending in the IH ring buffer when the process exits and frees up its PASID. To prevent the case, it uses idr cyclic allocator same as kernel pid's. (cherry picked from commit 8f1de51f49be692de137c8525106e0fce2d1912d)

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-31460

drm/amd/display: check if ext_caps is valid in BL setup

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check if ext_caps is valid in BL setup LVDS connectors don't have extended backlight caps so check if the pointer is valid before accessing it. (cherry picked from commit 3f797396d7f4eb9bb6eded184bbc6f033628a6f6)

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-31443

dmaengine: idxd: Fix crash when the event log is disabled

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix crash when the event log is disabled If reporting errors to the event log is not supported by the hardware, and an error that causes Function Level Reset (FLR) is received, the driver will try to restore the event log even if it was not allocated. Also, only try to free the event log if it was properly allocated.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-31418

netfilter: ipset: drop logically empty buckets in mtype_del

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: drop logically empty buckets in mtype_del mtype_del() counts empty slots below n->pos in k, but it only drops the bucket when both n->pos and k are zero. This misses buckets whose live entries have all been removed while n->pos still points past deleted slots. Treat a bucket as empty when all positions below n->pos are unused and release it directly instead of shrinking it further.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-31416

netfilter: nfnetlink_log: account for netlink header size

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: account for netlink header size This is a followup to an old bug fix: NLMSG_DONE needs to account for the netlink header size, not just the attribute size. This can result in a WARN splat + drop of the netlink message, but other than this there are no ill effects.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-23436

net: shaper: protect from late creation of hierarchy

In the Linux kernel, the following vulnerability has been resolved: net: shaper: protect from late creation of hierarchy We look up a netdev during prep of Netlink ops (pre- callbacks) and take a ref to it. Then later in the body of the callback we take its lock or RCU which are the actual protections. The netdev may get unregistered in between the time we take the ref and the time we lock it. We may allocate the hierarchy after flush has already run, which would lead to a leak. Take the instance lock in pre- already, this saves us from the race and removes the need for dedicated lock/unlock callbacks completely. After all, if there's any chance of write happening concurrently with the flush - we're back to leaking the hierarchy. We may take the lock for devices which don't support shapers but we're only dealing with SET operations here, not taking the lock would be optimizing for an error case.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-23421

drm/xe/configfs: Free ctx_restore_mid_bb in release

In the Linux kernel, the following vulnerability has been resolved: drm/xe/configfs: Free ctx_restore_mid_bb in release ctx_restore_mid_bb memory is allocated in wa_bb_store(), but xe_config_device_release() only frees ctx_restore_post_bb. Free ctx_restore_mid_bb[0].cs as well to avoid leaking the allocation when the configfs device is removed. (cherry picked from commit a235e7d0098337c3f2d1e8f3610c719a589e115f)

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-23417

bpf: Fix constant blinding for PROBE_MEM32 stores

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix constant blinding for PROBE_MEM32 stores BPF_ST | BPF_PROBE_MEM32 immediate stores are not handled by bpf_jit_blind_insn(), allowing user-controlled 32-bit immediates to survive unblinded into JIT-compiled native code when bpf_jit_harden >= 1. The root cause is that convert_ctx_accesses() rewrites BPF_ST|BPF_MEM to BPF_ST|BPF_PROBE_MEM32 for arena pointer stores during verification, before bpf_jit_blind_constants() runs during JIT compilation. The blinding switch only matches BPF_ST|BPF_MEM (mode 0x60), not BPF_ST|BPF_PROBE_MEM32 (mode 0xa0). The instruction falls through unblinded. Add BPF_ST|BPF_PROBE_MEM32 cases to bpf_jit_blind_insn() alongside the existing BPF_ST|BPF_MEM cases. The blinding transformation is identical: load the blinded immediate into BPF_REG_AX via mov+xor, then convert the immediate store to a register store (BPF_STX). The rewritten STX instruction must preserve the BPF_PROBE_MEM32 mode so the architecture JIT emits the correct arena addressing (R12-based on x86-64). Cannot use the BPF_STX_MEM() macro here because it hardcodes BPF_MEM mode; construct the instruction directly instead.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-23401

KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE

In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE When installing an emulated MMIO SPTE, do so *after* dropping/zapping the existing SPTE (if it's shadow-present). While commit a54aa15c6bda3 was right about it being impossible to convert a shadow-present SPTE to an MMIO SPTE due to a _guest_ write, it failed to account for writes to guest memory that are outside the scope of KVM. E.g. if host userspace modifies a shadowed gPTE to switch from a memslot to emulted MMIO and then the guest hits a relevant page fault, KVM will install the MMIO SPTE without first zapping the shadow-present SPTE. ------------[ cut here ]------------ is_shadow_present_pte(*sptep) WARNING: arch/x86/kvm/mmu/mmu.c:484 at mark_mmio_spte+0xb2/0xc0 [kvm], CPU#0: vmx_ept_stale_r/4292 Modules linked in: kvm_intel kvm irqbypass CPU: 0 UID: 1000 PID: 4292 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:mark_mmio_spte+0xb2/0xc0 [kvm] Call Trace: <TASK> mmu_set_spte+0x237/0x440 [kvm] ept_page_fault+0x535/0x7f0 [kvm] kvm_mmu_do_page_fault+0xee/0x1f0 [kvm] kvm_mmu_page_fault+0x8d/0x620 [kvm] vmx_handle_exit+0x18c/0x5a0 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm] kvm_vcpu_ioctl+0x2d5/0x980 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb5/0x730 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x47fa3f </TASK> ---[ end trace 0000000000000000 ]---

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-23386

gve: fix incorrect buffer cleanup in gve_tx_clean_pending_packets for QPL

In the Linux kernel, the following vulnerability has been resolved: gve: fix incorrect buffer cleanup in gve_tx_clean_pending_packets for QPL In DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDA buffer cleanup path. It iterates num_bufs times and attempts to unmap entries in the dma array. This leads to two issues: 1. The dma array shares storage with tx_qpl_buf_ids (union). Interpreting buffer IDs as DMA addresses results in attempting to unmap incorrect memory locations. 2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed the size of the dma array, causing out-of-bounds access warnings (trace below is how we noticed this issue). UBSAN: array-index-out-of-bounds in drivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out of range for type 'dma_addr_t[18]' (aka 'unsigned long long[18]') Workqueue: gve gve_service_task [gve] Call Trace: <TASK> dump_stack_lvl+0x33/0xa0 __ubsan_handle_out_of_bounds+0xdc/0x110 gve_tx_stop_ring_dqo+0x182/0x200 [gve] gve_close+0x1be/0x450 [gve] gve_reset+0x99/0x120 [gve] gve_service_task+0x61/0x100 [gve] process_scheduled_works+0x1e9/0x380 Fix this by properly checking for QPL mode and delegating to gve_free_tx_qpl_bufs() to reclaim the buffers.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel