CVE-2026-98818

mm/slab: do not wake up kswapd in __kfree_rcu_sheaf()

In the Linux kernel, the following vulnerability has been resolved: mm/slab: do not wake up kswapd in __kfree_rcu_sheaf() Since kfree_rcu() can be called under pi_lock (a raw spinlock in the scheduler), kfree_rcu() itself should never allocate memory with __GFP_KSWAPD_RECLAIM as waking up kswapd ends up acquiring pi_lock, which leads to a deadlock. Reproducing the issue even intentionally was not straightforward. The set_cpus_allowed_force() path that is called under pi_lock is exercised very rarely, and competing tasks that allocate memory will most likely wake kswapd up. Therefore the existence of the deadlock was verified with a modified kernel that has a lockdep map for waking up kswapd: ====================================================== WARNING: possible circular locking dependency detected 7.2.0-rc1-slab-for-next+ #10 Not tainted ------------------------------------------------------ git/6660 is trying to acquire lock: ffff8e524533c550 (&p->pi_lock){-.-.}-{2:2}, at: _raw_spin_lock_irqsave+0x12/0x20 but task is already holding lock: ffff8e57bffff1a0 (&pgdat->kswapd_wait){....}-{3:3}, at: _raw_spin_lock_irqsave+0x12/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&pgdat->kswapd_wait){....}-{3:3}: __lock_acquire+0x5a4/0xc50 lock_acquire.part.0+0xb7/0x240 lock_acquire+0x70/0x170 __raw_spin_lock_irqsave+0x44/0x80 _raw_spin_lock_irqsave+0x12/0x20 __wake_up_common_lock+0x31/0xa0 __wake_up+0x20/0x40 kswapd_wakeup_wake+0x7e/0x110 wakeup_kswapd+0x295/0x320 wake_all_kswapds+0xac/0x1a0 __alloc_pages_slowpath.constprop.0+0x282/0xf80 __alloc_frozen_pages_noprof+0x32a/0x360 alloc_slab_page+0x2e/0x160 allocate_slab+0x82/0x420 new_slab+0x52/0xb0 refill_objects+0x13d/0x190 refill_sheaf+0x5d/0xd0 __pcs_replace_empty_main+0x230/0xb10 [...] -> #1 (kswapd_wakeup){-.-.}-{0:0}: __lock_acquire+0x5a4/0xc50 lock_sync.part.0+0x75/0x100 lock_sync+0x36/0x70 might_wakeup_kswapd+0x61/0xa0 __kfree_rcu_sheaf+0x33/0xd90 kvfree_call_rcu+0x1d4/0x3b0 set_cpus_allowed_force+0x163/0x220 cpuset_cpus_allowed_fallback+0x18b/0x240 select_fallback_rq+0x1e6/0x250 [...] -> #0 (&p->pi_lock){-.-.}-{2:2}: check_prev_add+0xe6/0xe00 validate_chain+0x51e/0x6e0 __lock_acquire+0x5a4/0xc50 lock_acquire.part.0+0xb7/0x240 lock_acquire+0x70/0x170 __raw_spin_lock_irqsave+0x44/0x80 _raw_spin_lock_irqsave+0x12/0x20 try_to_wake_up+0x77/0xa90 default_wake_function+0x27/0x60 autoremove_wake_function+0x23/0xb0 __wake_up_common+0xb8/0x170 __wake_up_common_lock+0x51/0xa0 __wake_up+0x20/0x40 kswapd_wakeup_wake+0x7e/0x110 wakeup_kswapd+0x295/0x320 wake_all_kswapds+0xac/0x1a0 __alloc_pages_slowpath.constprop.0+0x282/0xf80 __alloc_frozen_pages_noprof+0x32a/0x360 alloc_slab_page+0x2e/0x160 allocate_slab+0x82/0x420 new_slab+0x52/0xb0 refill_objects+0x13d/0x190 refill_sheaf+0x5d/0xd0 __pcs_replace_empty_main+0x230/0xb10 [...] other info that might help us debug this: Chain exists of: &p->pi_lock --> kswapd_wakeup --> &pgdat->kswapd_wait Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pgdat->kswapd_wait); lock(kswapd_wakeup); lock(&pgdat->kswapd_wait); lock(&p->pi_lock); *** DEADLOCK *** 3 locks held by git/6660: #0: ffff8e519f0e9e20 (&type->i_mutex_dir_key#6){++++}-{4:4}, at: lookup_slow+0x2d/0x60 #1: ffffffff8a31c460 (kswapd_wakeup){-.-.}- ---truncated---

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-98832

blk-cgroup: save IRQ state in blkg_tryget_closest()

In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: save IRQ state in blkg_tryget_closest() bio_set_dev() associates the bio with a blkg through bio_associate_blkg(). If the blkg lookup misses, blkg_tryget_closest() takes q->queue_lock with spin_lock_irq() and releases it with spin_unlock_irq(), which unconditionally enables local interrupts. Callers may call bio_set_dev() with interrupts already disabled, e.g. dm-thin's pool_map() does so while holding pool->lock taken with spin_lock_irq(). The nested spin_unlock_irq() then enables interrupts while pool->lock is still held, so an I/O completion softirq can run on the same CPU, re-acquire pool->lock (thin_endio(), or overwrite_endio() -> complete_mapping_preparation()) and deadlock. lockdep reports this as inconsistent SOFTIRQ-ON-W to IN-SOFTIRQ-W usage. Commit 3a762de55b4e ("block: save irq state in blkg_lookup_create()") fixed the same problem while the lock lived in blkg_lookup_create(), but commit 9327a865e395 ("blk-cgroup: don't nest queue_lock under rcu in blkg_lookup_create()") moved the locking into blkg_tryget_closest() and reverted it to spin_lock_irq(). Save and restore the caller's IRQ state instead.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-106116

ImageSharp: BigTIFF IFD count can keep a decoder thread in a non-progressing loop

ImageSharp is a 2D graphics library. From 2.0.0 until 4.1.2, ExifReader.ReadValues64 trusts the 64-bit BigTIFF IFD entry count and iterates once per declared entry. When fewer than 20 bytes remain, ExifReader.ReadValue64 returns without advancing the stream or terminating the outer loop, so a small malformed BigTIFF can keep one decoder thread executing for an attacker-controlled duration. This report does not claim worker-pool exhaustion. This issue is fixed in version 4.1.2.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed

Vendors

Sixlabors

Products

Imagesharp

CVE-2026-99085

sched_ext: Fix CPU hotplug hang when a dying CPU's tasks sit in the BPF scheduler

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix CPU hotplug hang when a dying CPU's tasks sit in the BPF scheduler A CPU going down has to empty its own rq. Its hotplug thread waits in sched_cpu_wait_empty() until nothing else is left, and the only thing that wakes it is balance_push(), which runs from __schedule() on the dying CPU and pushes off the migratable tasks the CPU picks. sched_ext breaks this. A task sitting on a user DSQ or held by the BPF scheduler is still counted on its rq, but an inactive CPU no longer calls ops.dispatch() and can't pull the task back. The dying CPU goes idle with the task still counted, and one of two things happens: - Another CPU consumes the task. The rq empties without a __schedule() on the dying CPU, so the hotplug thread is never woken and cpu_down() hangs holding cpu_hotplug_lock. - The task is affine only to the dying CPU. Nothing can move it, and the offline stalls until the watchdog ejects the BPF scheduler. When the rq goes offline, re-enqueue every task on it that isn't already on the local DSQ. An enqueue on an offline rq lands on the local DSQ, so the dying CPU itself picks the tasks and balance_push() pushes them off, the same as for the other sched classes. From then on no sched_ext path on another CPU can pull a task off the rq. ops.dispatch() currently stops as soon as the CPU goes inactive, and CPU hotplug then waits for an RCU grace period before taking the rq offline. A BPF-held task affine only to the dying CPU and preempted inside an RCU read-side critical section would block that grace period, and the rq would never go offline. Test SCX_RQ_ONLINE directly so that ops.dispatch() keeps running until the rq goes offline. Only the dying CPU's own hotplug thread clears the flag during teardown, and task_can_run_on_remote_rq() still keeps other rqs' tasks off the CPU.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Linux Kernel

CVE-2026-109299

Open WebUI 0.9.0 before 0.11.4 Denial of Service via Recurrence Rule Validation

Open WebUI from 0.9.0 before 0.11.4 contains a denial of service vulnerability that allows authenticated users with automations permission to stall the instance by submitting unsatisfiable recurrence rules. Attackers can repeatedly send rules like February 30th to the automations create or update endpoints, blocking the shared event loop for seconds per request.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed

Vendors

Openwebui

Products

Open Webui

CVE-2026-105390

Local Deadlock in OpenVPN Windows Driver Leads to Denial of Service

Improper synchronization in the OpenVPN ovpn-dco-win for Windows versions 0.6.5 through 1.3.5 and 2.4.0 through 2.8.7 allows local attackers to trigger a deadlock via a crafted write to the ovpn-dco device, causing the host to become unresponsive.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed

Vendors

Openvpn

Products

Ovpn-dco-win

CVE-2026-112390

Pillow: Infinite loop in MIC n_frames when the embedded TIFF

Pillow is a Python imaging library. From 7.2.0 until 13.0.0, Pillow can enter an infinite loop while determining the frame count of a MIC image. MicImageFile inherits TIFF frame traversal, but MicImageFile.tell reports the OLE stream index and its seek() resets TIFF frame state, so an embedded TIFF with at least three IFDs never advances. When an application with olefile installed reads n_frames or saves all frames from a crafted MIC file, the non-advancing traversal can hold a worker at full CPU indefinitely. This issue is fixed in version 13.0.0.

CVSS 4.0 · 8.2 High EPSS < 1% KEV · Not listed

Vendors

Python Python-pillow

Products

Pillow Pillow

CVE-2026-112391

Pillow: PdfParser can recurse without limit in get_value() and linearize_page_tree()

Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow's PdfParser.get_value() can recurse without a limit while reading nested PDF objects. The parser follows attacker-controlled arrays and dictionaries when an existing PDF is opened for append. An attacker can provide a deeply nested PDF to an application that saves an image with PDF append enabled. This can raise an uncaught RecursionError or terminate the worker, causing denial of service. This issue is fixed in version 13.0.0.

CVSS 4.0 · 6.3 Medium EPSS < 1% KEV · Not listed

Vendors

Python Python-pillow

Products

Pillow Pillow

CVE-2026-96596

erl_tar:extract/2 loops forever on a GNU sparse member with a trailing hole

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Erlang OTP stdlib (erl_tar module), hexpm hex_core (hex_erl_tar module), hexpm hex (mix_hex_erl_tar module) and erlang rebar3 (r3_hex_erl_tar module) allows an attacker who supplies a tar archive to cause a denial of service via a crafted GNU sparse member. When erl_tar:extract/1,2 writes a member to disk, erl_tar:stream_to_file_loop/3 reads it in chunks of 65536 bytes by default. For a GNU sparse member whose sparse map ends before its real size, erl_tar:do_sparse_read/3 matches its trailing-hole clause before its zero-length clause. After the chunk is used up, the trailing-hole clause reads zero bytes, does not advance the position, and recurses forever. A 2048-byte archive keeps the extracting process and one scheduler busy until the process is killed. The {max_size, N} option prevents this only when N is below the real size of the member. Extraction with the memory option is not affected. hex_core ships its own copy of erl_tar as hex_erl_tar, and Hex and rebar3 ship hex_core with prefixed module names (mix_hex_erl_tar and r3_hex_erl_tar). These copies contain the same code and do not call stdlib's erl_tar, so they are affected on any OTP version. OTP 28 is not affected, but an application running on OTP 28 is affected if it extracts archives through an affected version of hex_core, Hex or rebar3. This issue affects OTP from OTP 29.0 before OTP 29.1.2, corresponding to rebar3 from 3.27.1 before 3.28.0, and stdlib from 8.0 before 8.1.1, and hex from 2.4.2 before 2.5.3; hex_core: from 0.14.0 before 0.20.1.

CVSS 4.0 · 5.9 Medium EPSS < 1% KEV · Not listed

Vendors

Erlang Hexpm

Products

Erlang/otp Erlang\/otp Rebar3 and 2 more

CVE-2026-100354

kin-openapi: Uncontrolled Recursion on Circular allOf/anyOf/oneOf Schemas Causes Fatal Process Crash

kin-openapi is a Go project for handling OpenAPI files. Prior to 0.149.0, runtime request, response, and direct schema validation lacks cycle detection when an allOf, anyOf, or oneOf chain refers back to an ancestor schema, even though loading and document validation accept the circular reference. A request or response that reaches the affected schema causes unbounded recursion in Schema.visitJSON or openapi3filter.decodeValue and exhausts the Go goroutine stack. The resulting fatal stack overflow cannot be caught with recover and terminates the entire process, including unrelated requests. This issue is fixed in version 0.149.0.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed

Vendors

Getkin

Products

Kin-openapi

CVE-2026-101787

mysql: mysql: Denial of Service via Server Optimizer flaw

Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: Optimizer). Supported versions that are affected are MySQL Server: 8.4.0-8.4.12, 9.7.0-9.7.3, 26.7.0-26.7.1; MySQL Cluster: 8.0.0-8.0.49, 8.4.0-8.4.12, 9.7.0-9.7.3 and 26.7.0-26.7.1. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H).

CVSS 3.1 · 4.9 Medium EPSS < 1% KEV · Not listed

Vendors

Oracle

Products

Mysql Cluster Mysql Server

CVE-2026-101752

mysql: mysql: Denial of Service in Server: Components Services

Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: Components Services). Supported versions that are affected are MySQL Server: 9.7.0-9.7.3, 26.7.0-26.7.1; MySQL Cluster: 9.7.0-9.7.3 and 26.7.0-26.7.1. Difficult to exploit vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 4.4 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H).

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed

Vendors

Oracle

Products

Mysql Cluster Mysql Server

CVE-2026-101798

mysql: mysql: Denial of Service in the server optimizer

Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: Optimizer). Supported versions that are affected are MySQL Server: 8.4.0-8.4.12, 9.7.0-9.7.3, 26.7.0-26.7.1; MySQL Cluster: 8.0.0-8.0.49, 8.4.0-8.4.12, 9.7.0-9.7.3 and 26.7.0-26.7.1. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H).

CVSS 3.1 · 4.9 Medium EPSS < 1% KEV · Not listed

Vendors

Oracle

Products

Mysql Cluster Mysql Server

CVE-2026-101755

mysql: mysql: Denial of Service via client programs

Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Client programs). Supported versions that are affected are MySQL Server: 26.7.0-26.7.1; MySQL Cluster: 26.7.0-26.7.1. Difficult to exploit vulnerability allows low privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H).

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed

Vendors

Oracle

Products

Mysql Cluster Mysql Server

CVE-2026-101776

mysql: mysql: Denial of Service in Group Replication plugin

Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: Group Replication Plugin). Supported versions that are affected are MySQL Server: 8.4.0-8.4.12, 9.7.0-9.7.3, 26.7.0-26.7.1; MySQL Cluster: 8.0.0-8.0.49, 8.4.0-8.4.12, 9.7.0-9.7.3 and 26.7.0-26.7.1. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H).

CVSS 3.1 · 4.9 Medium EPSS < 1% KEV · Not listed

Vendors

Oracle

Products

Mysql Cluster Mysql Server

CVE-2026-101801

mysql: mysql: Denial of Service in Server Optimizer

Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: Optimizer). Supported versions that are affected are MySQL Server: 8.4.0-8.4.12, 9.7.0-9.7.3, 26.7.0-26.7.1; MySQL Cluster: 8.0.0-8.0.49, 8.4.0-8.4.12, 9.7.0-9.7.3 and 26.7.0-26.7.1. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H).

CVSS 3.1 · 4.9 Medium EPSS < 1% KEV · Not listed

Vendors

Oracle

Products

Mysql Cluster Mysql Server

CVE-2026-6554

infinte loop in libpcap before 1.10.7

libpcap BPF interpreter treats the offset in the 'ja L' BPF instruction as a signed integer to implement looping via backward jumps, but it does not limit the number of loop iterations. A crafted filter program or the 'protochain' primitive used on a crafted network packet can cause the interpreter to loop infinitely.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed

Vendors

Tcpdump

Products

Libpcap

CVE-2026-76445

Multiple Cisco Products Snort 3 Denial of Service Vulnerability

Multiple Cisco products are affected by a vulnerability in the Snort 3 Detection Engine that could allow an unauthenticated, remote attacker to cause the detection engine to unexpectedly restart, resulting in a denial of service (DoS) condition. The vulnerability is due to a flaw in logic handling when General Packet Radio Service (GPRS) Tunneling Protocol (GTP) extension headers are processed within the codec. An attacker could exploit this vulnerability by sending a crafted, fragmented UDP datagram that contains these headers to the Snort 3 Detection Engine of an affected device. A successful exploit could allow the attacker to cause the detection engine to enter an infinite loop, resulting in a DoS condition.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed

Vendors

Cisco

Products

Cisco Open Source Snort3 Cisco Secure Firewall Threat Defense (ftd) Software Cisco Utd Snort Ips Engine Software and 1 more

CVE-2026-98489

net: atl1c: fix soft lockup on out-of-range tpd_cons read

In the Linux kernel, the following vulnerability has been resolved: net: atl1c: fix soft lockup on out-of-range tpd_cons read The hardware can report an out-of-range tpd_cons (seen as 0xffff) while the PCIe link/MAC is resetting. An out-of-range value can never be reached and the loop below would spin forever. To avoid a soft lockup treat it as "nothing new to clean" instead. Reproduced on two machines, same NIC (Qualcomm Atheros AR8151 v2.0, 4-port), triggered by rebooting a Mikrotik CCR2004 PCIe card that the ports are directly linked to: - Ubuntu 26.04.1 LTS, kernel 7.0.0-31-generic. The link-flap precursor, before the lockup was captured with a full trace elsewhere: atl1c 0000:05:00.0 enp5s0f0: NETDEV WATCHDOG: CPU: 4: transmit queue 2 timed out 489984 ms atl1c 0000:05:00.0: MAC state machine can't be idle since disabled for 10ms second atl1c 0000:05:00.0: atl1c: enp5s0f0 NIC Link is Up<65535 Mbps Full Duplex> 65535 (0xffff) here is the same value tpd_cons reads back once the loop below gets stuck. - Proxmox VE, kernel 7.0.14-11-pve. Same NIC/trigger, this time caught by the soft lockup watchdog with a full stack trace: watchdog: BUG: soft lockup - CPU#12 stuck for 354s! [napi/eth%d-0:329] CPU: 12 UID: 0 PID: 329 Comm: napi/eth%d-0 Tainted: P O L 7.0.14-11-pve #1 PREEMPT(lazy) RIP: 0010:atl1c_clean_tx+0x142/0x2d0 [atl1c] Call Trace: <TASK> __napi_poll+0x32/0x1e0 napi_threaded_poll_loop+0x286/0x2e0 napi_threaded_poll+0xfd/0x140 kthread+0xf7/0x130 ret_from_fork+0x2da/0x3a0 ret_from_fork_asm+0x1a/0x30 </TASK>

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-101620

mysql: mysql: Denial of Service in Server Optimizer

Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: Optimizer). Supported versions that are affected are MySQL Server: 9.7.0-9.7.3; MySQL Cluster: 9.7.0-9.7.3. Easily exploitable vulnerability allows low privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 6.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H).

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed

Vendors

Oracle

Products

Mysql Cluster Mysql Server